Jump to content

List of ISO standards 28000–29999

From Wikipedia, the free encyclopedia

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]

ISO 28000 – ISO 28999

[edit]
  • ISO 28000:2007 Specification for security management systems for the supply chain
  • ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
  • ISO 28002:2011 Security management systems for the supply chain – Development of resilience in the supply chain – Requirements with guidance for use
  • ISO 28003:2007 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
  • ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
    • ISO 28004-1:2007 Part 1: General principles
    • ISO 28004-2:2014 Part 2: Guidelines for adopting ISO 28000 for use in medium and small seaport operations
    • ISO 28004-3:2014 Part 3: Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other than marine ports)
    • ISO 28004-4:2014 Part 4: Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
  • ISO 28005 Security management systems for the supply chain – Electronic port clearance (EPC)
    • ISO 28005-1:2013 Part 1: Message structures
    • ISO 28005-2:2011 Part 2: Core data elements
  • ISO/PAS 28007:2012 Ships and marine technology—Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) [Withdrawn: replaced by ISO 28007-1:2015]
  • ISO 28007 Ships and marine technology - Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
    • ISO 28007-1:2015 Part 1: General
  • ISO/TS 28037:2010 Determination and use of straight-line calibration functions
  • ISO/CIE 28077:2016 Photocarcinogenesis action spectrum (non-melanoma skin cancers)
  • ISO/TR 28118:2009 Information and documentation - Performance indicators for national libraries
  • ISO 28178:2009 Graphic technology - Exchange format for colour and process control data using XML or ASCII text
  • ISO 28219:2009 Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols
  • ISO 28238:2010 Compression and injection moulds - Components for gating systems
  • ISO 28239:2008 Textile machinery – Opener and cleaner for staple fibres preparation – Vocabulary and principles of construction
  • ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
  • ISO/IEC 28361:2007 Information technology – Telecommunications and information exchange between systems – Near Field Communication Wired Interface (NFC-WI)
  • ISO/TR 28380 Health informatics – IHE global standards adoption
    • ISO/TR 28380-1:2014 Part 1: Process
    • ISO/TR 28380-2:2014 Part 2: Integration and content profiles
    • ISO/TR 28380-3:2014 Part 3: Deployment
  • ISO 28401:2010 Light metals and their alloys – Titanium and titanium alloys – Classification and terminology
  • ISO 28500:2017 Information and documentation - WARC file format
  • ISO 28560 Information and documentation - RFID in libraries
    • ISO 28560-1:2014 Part 1: Data elements and general guidelines for implementation
    • ISO 28560-2:2014 Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962
    • ISO 28560-3:2014 Part 3: Fixed length encoding
    • ISO/TS 28560-4:2014 Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory
  • ISO 28564 Public information guidance systems
    • ISO 28564-1:2010 Part 1: Design principles and element requirements for location plans, maps and diagrams
    • ISO 28564-2:2016 Part 2: Guidelines for the design and use of location signs and direction signs
  • ISO 28620:2010 Medical devices – Non-electrically driven portable infusion devices
  • ISO 28640:2010 Random variate generation methods
  • ISO/TR 28682:2008 Intelligent transport systems – Joint APEC-ISO study of progress to develop and deploy ITS standards
  • ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
  • ISO 28902 Air quality – Environmental meteorology
    • ISO 28902-1:2012 Part 1: Ground-based remote sensing of visual range by lidar
    • ISO 28902-2:2017 Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar
  • ISO/TR 28980:2007 Ophthalmic optics – Spectacle lenses – Parameters affecting lens power measurement

ISO 29000 – ISO 29999

[edit]
  • ISO/TS 29001:2010 Petroleum, petrochemical and natural gas industries – Sector-specific quality management systems – Requirements for product and service supply organizations
  • ISO/IEC 29100:2011 Information technology - Security techniques - Privacy framework
  • ISO/IEC 29101:2013 Information technology - Security techniques - Privacy architecture framework
  • ISO/IEC TR 29106:2007 Information technology - Generic cabling - Introduction to the MICE environmental classification
  • ISO/IEC TR 29107 Information technology - Intelligent homes - Taxonomy of specifications
    • ISO/IEC TR 29107-1:2010 Part 1: The scheme
  • ISO/IEC TR 29108:2013 Information technology - Terminology for intelligent homes
  • ISO/IEC 29109 Information technology – Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794
    • ISO/IEC 29109-1:2009 Part 1: Generalized conformance testing methodology
    • ISO/IEC 29109-2:2010 Part 2: Finger minutiae data
    • ISO/IEC 29109-4:2010 Part 4: Finger image data
    • ISO/IEC 29109-5:2014 Part 5: Face image data
    • ISO/IEC 29109-6:2011 Part 6: Iris image data
    • ISO/IEC 29109-7:2011 Part 7: Signature/sign time series data
    • ISO/IEC 29109-8:2011 Part 8: Finger pattern skeletal data
    • ISO/IEC 29109-9:2011 Part 9: Vascular image data
    • ISO/IEC 29109-10:2010 Part 10: Hand geometry silhouette data
  • ISO/IEC 29110 Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs)[Note 3]
    • ISO/IEC TR 29110-1:2016 Part 1: Overview
    • ISO/IEC 29110-2-1:2015 Part 2-1: Framework and taxonomy
    • ISO/IEC TR 29110-2-2:2016 Part 2-2: Guide for the development of domain-specific profiles
    • ISO/IEC TR 29110-3-1:2015 Part 3-1: Assessment guide
    • ISO/IEC 29110-3-3:2016 Part 3-3: Certification requirements for conformity assessments of VSE profiles using process assessment and maturity models
    • ISO/IEC TR 29110-3-4:2015 Part 3-4: Autonomy-based improvement method
    • ISO/IEC 29110-4-1:2011 Part 4-1: Profile specifications: Generic profile group
    • ISO/IEC TR 29110-5-1-1:2012 Part 5-1-1: Management and engineering guide: Generic profile group: Entry profile
    • ISO/IEC TR 29110-5-1-2:2011 Part 5-1-2: Management and engineering guide: Generic profile group: Basic profile
    • ISO/IEC TR 29110-5-1-3:2017 Part 5-1-3: Software engineering - Management and engineering guide: Generic profile group - Intermediate profile
    • ISO/IEC TR 29110-5-2-1:2016 Part 5-2-1: Organizational management guidelines
    • ISO/IEC TR 29110-5-6-1:2015 Part 5-6-1: Systems engineering - Management and engineering guide: Generic profile group: Entry profile
    • ISO/IEC TR 29110-5-6-2:2014 Part 5-6-2: Systems engineering - Management and engineering guide: Generic profile group: Basic profile
  • ISO/IEC TS 29113:2012 Information technology - Further interoperability of Fortran with C
  • ISO/IEC 29115:2013 Information technology - Security techniques - Entity authentication assurance framework
  • ISO/IEC 29119 Software and systems engineering – Software testing
  • ISO/IEC 29120 Information technology – Machine readable test data for biometric testing and reporting
    • ISO/IEC 29120-1:2015 Part 1: Test reports
  • ISO/IEC 29121:2013 Information technology - Digitally recorded media for information interchange and storage - Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks
  • ISO/IEC TR 29123:2007 Identification Cards – Proximity Cards – Requirements for the enhancement of interoperability
  • ISO/IEC 29124:2010 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C++ Library to support mathematical special functions
  • ISO/IEC TS 29125:2017 Information technology - Telecommunications cabling requirements for remote powering of terminal equipment
  • ISO/IEC TR 29127:2011 Information technology - System Process and Architecture for Multilingual Semantic Reverse Query Expansion
  • ISO/IEC 29128:2011 Information technology - Security techniques - Verification of cryptographic protocols
  • ISO/IEC 29133:2010 Information technology - Automatic identification and data capture techniques - Quality test specification for rewritable hybrid media data carriers
  • ISO/IEC 29134:2017 Information technology - Security techniques - Guidelines for privacy impact assessment
  • ISO/IEC 29136:2012 Information technology – User interfaces – Accessibility of personal computer hardware
  • ISO/IEC TR 29138 Information technology – Accessibility considerations for people with disabilities
    • ISO/IEC TR 29138-1:2009 Part 1: User needs summary
    • ISO/IEC TR 29138-2:2009 Part 2: Standards inventory
    • ISO/IEC TR 29138-3:2009 Part 3: Guidance on user needs mapping
  • ISO/IEC TS 29140 Information technology for learning, education and training - Nomadicity and mobile technologies
    • ISO/IEC TS 29140-1:2011 Part 1: Nomadicity reference model
    • ISO/IEC TS 29140-2:2011 Part 2: Learner information model for mobile learning
  • ISO/IEC 29141:2009 Information technology – Biometrics – Tenprint capture using biometric application programming interface (BioAPI)
  • ISO/IEC 29143:2011 Information technology - Automatic identification and data capture techniques - Air interface specification for Mobile RFID interrogators
  • ISO/IEC TR 29144:2014 Information technology – Biometrics – The use of biometric technology in commercial Identity Management applications and processes
  • ISO/IEC 29145 Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services
    • ISO/IEC 29145-1:2014 Part 1: PHY Layer
    • ISO/IEC 29145-2:2014 Part 2: MAC Layer
    • ISO/IEC 29145-3:2014 Part 3: NWK Layer
  • ISO/IEC 29146:2016 Information technology - Security techniques - A framework for access management
  • ISO/IEC 29147:2014 Information technology - Security techniques - Vulnerability disclosure
  • ISO/IEC/IEEE 29148:2011 Systems and software engineering - Life cycle processes - Requirements engineering
  • ISO/IEC TR 29149:2012 Information technology - Security techniques - Best practices for the provision and use of time-stamping services
  • ISO/IEC 29150:2011 Information technology - Security techniques - Signcryption
  • ISO/IEC 29151:2017 Information technology - Security techniques - Code of practice for personally identifiable information protection
  • ISO/IEC TR 29154:2013 Software engineering - Guide for the application of ISO/IEC 24773:2008 (Certification of software engineering professionals - Comparison framework)
  • ISO/IEC 29155 Systems and software engineering - Information technology project performance benchmarking framework
    • ISO/IEC 29155-1:2017 Part 1: Concepts and definitions
    • ISO/IEC 29155-2:2013 Part 2: Requirements for benchmarking
    • ISO/IEC 29155-3:2015 Part 3: Guidance for reporting
    • ISO/IEC 29155-4:2016 Part 4: Guidance for data collection and maintenance
  • ISO/IEC TR 29156:2015 Information technology – Guidance for specifying performance requirements to meet security and usability needs in applications using biometrics
  • ISO/IEC 29157:2015 Information technology – Telecommunications and information exchange between systems – PHY/MAC specifications for short-range wireless low-rate applications in the ISM band
  • ISO/IEC TR 29158:2011 Information technology - Automatic identification and data capture techniques - Direct Part Mark (DPM) Quality Guideline
  • ISO/IEC 29159 Information technology – Biometric calibration, augmentation and fusion data
    • ISO/IEC 29159-1:2010 Part 1: Fusion information format
  • ISO/IEC 29160:2012 Information technology - Radio frequency identification for item management - RFID Emblem
  • ISO/IEC 29161:2016 Information technology - Data structure - Unique identification for the Internet of Things
  • ISO/IEC TR 29162:2012 Information technology - Guidelines for using data structures in AIDC media
  • ISO/IEC TR 29163 Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition
    • ISO/IEC TR 29163-1:2009 Part 1: Overview Version 1.1
    • ISO/IEC TR 29163-2:2009 Part 2: Content Aggregation Model Version 1.1
    • ISO/IEC TR 29163-3:2009 Part 3: Run-Time Environment Version 1.1
    • ISO/IEC TR 29163-4:2009 Part 4: Sequencing and Navigation Version 1.1
  • ISO/IEC 29164:2011 Information technology – Biometrics – Embedded BioAPI
  • ISO/IEC TR 29166:2011 Information technology - Document description and processing languages - Guidelines for translation between ISO/IEC 26300 and ISO/IEC 29500 document formats
  • ISO/IEC 29167 Information technology - Automatic identification and data capture techniques
    • ISO/IEC 29167-1:2014 Part 1: Security services for RFID air interfaces
    • ISO/IEC 29167-10:2015 Part 10: Crypto suite AES-128 security services for air interface communications
    • ISO/IEC 29167-11:2014 Part 11: Crypto suite PRESENT-80 security services for air interface communications
    • ISO/IEC 29167-12:2015 Part 12: Crypto suite ECC-DH security services for air interface communications
    • ISO/IEC 29167-13:2015 Part 13: Crypto suite Grain-128A security services for air interface communications
    • ISO/IEC 29167-14:2015 Part 14: Crypto suite AES OFB security services for air interface communications
    • ISO/IEC 29167-16:2015 Part 16: Crypto suite ECDSA-ECDH security services for air interface communications
    • ISO/IEC 29167-17:2015 Part 17: Crypto suite cryptoGPS security services for air interface communications
    • ISO/IEC 29167-19:2016 Part 19: Crypto suite RAMON security services for air interface communications
    • ISO/IEC 29167-21:2018 Part 21: Crypto suite SIMON security services for air interface communications
    • ISO/IEC 29167-22:2018 Part 22: Crypto suite SPECK security services for air interface communications
  • ISO/IEC 29168 Information technology - Open systems interconnection
    • ISO/IEC 29168-1:2011 Part 1: Object identifier resolution system
    • ISO/IEC 29168-2:2011 Part 2: Procedures for the object identifier resolution system operational agency
  • ISO/IEC 29169:2016 Information technology - Process assessment - Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity
  • ISO/IEC 29170 Information technology - Advanced image coding and evaluation
    • ISO/IEC 29170-2:2015 Part 2: Evaluation procedure for nearly lossless coding
  • ISO/IEC 29171:2009 Information technology - Digitally recorded media for information interchange and storage - Information Versatile Disk for Removable usage (iVDR) cartridge
  • ISO/IEC TR 29172:2011 Information technology - Mobile item identification and management - Reference architecture for Mobile AIDC services
  • ISO/IEC 29173 Information technology - Mobile item identification and management
    • ISO/IEC 29173-1:2012 Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C
  • ISO/IEC 29175:2012 Information technology - Mobile item identification and management - User data for Mobile AIDC services
  • ISO/IEC 29176:2011 Information technology - Mobile item identification and management - Consumer privacy-protection protocol for Mobile RFID services
  • ISO/IEC 29177:2016 Information technology - Automatic identification and data capture technique - Identifier resolution protocol for multimedia information access triggered by tag-based identification
  • ISO/IEC 29178:2012 Information technology - Mobile item identification and management - Service broker for Mobile AIDC services
  • ISO/IEC 29179:2012 Information technology - Mobile item identification and management - Mobile AIDC application programming interface
  • ISO/IEC 29180:2012 Information technology – Telecommunications and information exchange between systems – Security framework for ubiquitous sensor networks
  • ISO/IEC TR 29181 Information technology – Future Network – Problem statement and requirements
    • ISO/IEC TR 29181-1:2012 Part 1: Overall aspects
    • ISO/IEC TR 29181-2:2014 Part 2: Naming and addressing
    • ISO/IEC TR 29181-3:2013 Part 3: Switching and routing
    • ISO/IEC TR 29181-4:2013 Part 4: Mobility
    • ISO/IEC TR 29181-5:2014 Part 5: Security
    • ISO/IEC TR 29181-6:2013 Part 6: Media transport
    • ISO/IEC TR 29181-7:2013 Part 7: Service composition
    • ISO/IEC TR 29181-8:2017 Part 8: Quality of Service
    • ISO/IEC TR 29181-9:2017 Part 9: Networking of everything
  • ISO/IEC 29182 Information technology – Sensor networks: Sensor Network Reference Architecture (SNRA)
    • ISO/IEC 29182-1:2013 Part 1: General overview and requirements
    • ISO/IEC 29182-2:2013 Part 2: Vocabulary and terminology
    • ISO/IEC 29182-3:2014 Part 3: Reference architecture views
    • ISO/IEC 29182-4:2013 Part 4: Entity models
    • ISO/IEC 29182-5:2013 Part 5: Interface definitions
    • ISO/IEC 29182-6:2014 Part 6: Applications
    • ISO/IEC 29182-7:2015 Part 7: Interoperability guidelines
  • ISO/IEC 29187 Information technology - Identification of privacy protection requirements pertaining to learning, education and training (LET)
    • ISO/IEC 29187-1:2013 Part 1: Framework and reference model
  • ISO/IEC TR 29189:2015 Information technology – Biometrics – Evaluation of examiner assisted biometric applications
  • ISO/IEC 29190:2015 Information technology - Security techniques - Privacy capability assessment model
  • ISO/IEC 29191:2012 Information technology - Security techniques - Requirements for partially anonymous, partially unlinkable authentication.
  • ISO/IEC 29192 Information technology - Security techniques - Lightweight cryptography
    • ISO/IEC 29192-1:2012 Part 1: General
    • ISO/IEC 29192-2:2012 Part 2: Block ciphers
    • ISO/IEC 29192-3:2012 Part 3: Stream ciphers
    • ISO/IEC 29192-4:2013 Part 4: Mechanisms using asymmetric techniques
    • ISO/IEC 29192-5:2016 Part 5: Hash-functions
    • ISO/IEC 29192-6:2016 Part 6: Message authentication codes (MACs)
    • ISO/IEC 29192-7:2016 Part 7: Broadcast authentication protocols
  • ISO/IEC TR 29194:2015 Information Technology – Biometrics – Guide on designing accessible and inclusive biometric systems
  • ISO/IEC TR 29195:2015 Traveller processes for biometric recognition in automated border control systems
  • ISO/IEC TR 29196:2015 Guidance for biometric enrolment
  • ISO/IEC 29197:2015 Information technology - Evaluation methodology for environmental influence in biometric system performance
  • ISO/IEC TR 29198:2013 Information technology – Biometrics – Characterization and measurement of difficulty for fingerprint databases for technology evaluation
  • ISO/IEC 29199 Information technology - JPEG XR image coding system
    • ISO/IEC TR 29199-1:2011 Part 1: System architecture
    • ISO/IEC 29199-2:2012 Part 2: Image coding specification
    • ISO/IEC 29199-3:2010 Part 3: Motion JPEG XR
    • ISO/IEC 29199-4:2010 Part 4: Conformance testing
    • ISO/IEC 29199-5:2012 Part 5: Reference software
  • ISO 29281 Intelligent transport systems – Communication access for land mobiles (CALM) – Non-IP networking
    • ISO 29281-1:2013 Part 1: Fast networking & transport layer protocol (FNTP)
    • ISO 29281-2:2013 Part 2: Legacy system support
  • ISO 29282:2011 Intelligent transport systems – Communications access for land mobiles (CALM) – Satellite networks
  • ISO 29283:2011 ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE 802.20
  • ISO/TS 29284:2012 Intelligent transport systems – Event-based probe vehicle data
  • ISO/IEC 29341 Information technology - UPnP Device Architecture
    • ISO/IEC 29341-1:2011 Part 1: UPnP Device Architecture Version 1.0
    • ISO/IEC 29341-1-1:2011 Part 1-1: UPnP Device Architecture Version 1.1
    • ISO/IEC 29341-1-2:2017 Part 1-2: UPnP Device Architecture Version 2.0
    • ISO/IEC 29341-2:2008 Part 2: Basic Device Control Protocol - Basic Device
    • ISO/IEC 29341-3-1:2011 Part 3-1: Audio Video Device Control Protocol - Audio Video Architecture
    • ISO/IEC 29341-3-2:2008 Part 3-2: Audio Video Device Control Protocol - Media Renderer Device
    • ISO/IEC 29341-3-3:2008 Part 3-3: Audio Video Device Control Protocol - Media Server Device
    • ISO/IEC 29341-3-10:2015 Part 3-10: Audio Video Device Control Protocol - Audio Video Transport Service
    • ISO/IEC 29341-3-11:2008 Part 3-11: Audio Video Device Control Protocol - Connection Manager Service
    • ISO/IEC 29341-3-12:2008 Part 3-12: Audio Video Device Control Protocol - Content Directory Service
    • ISO/IEC 29341-3-13:2008 Part 3-13: Audio Video Device Control Protocol - Rendering Control Service
    • ISO/IEC 29341-4-2:2011 Part 4-2: Audio Video Device Control Protocol - Level 2 - Media Renderer Device
    • ISO/IEC 29341-4-3:2008 Part 4-3: Audio Video Device Control Protocol - Level 2 - Media Server Device
    • ISO/IEC 29341-4-4:2011 Part 4-4: Audio Video Device Control Protocol - Level 2 - Audio Video Data Structures
    • ISO/IEC 29341-4-10:2011 Part 4-10: Audio Video Device Control Protocol - Level 2 - Audio Video Transport Service
    • ISO/IEC 29341-4-11:2011 Part 4-11: Audio Video Device Control Protocol - Level 2 - Connection Manager Service
    • ISO/IEC 29341-4-12:2008 Part 4-12: Audio Video Device Control Protocol - Level 2 - Content Directory Service
    • ISO/IEC 29341-4-13:2011 Part 4-13: Audio Video Device Control Protocol - Level 2 - Rendering Control Service
    • ISO/IEC 29341-4-14:2011 Part 4-14: Audio Video Device Control Protocol - Level 2 - Scheduled Recording Service
    • ISO/IEC 29341-5-1:2008 Part 5-1: Digital Security Camera Device Control Protocol - Digital Security Camera Device
    • ISO/IEC 29341-5-10:2008 Part 5-10: Digital Security Camera Device Control Protocol - Digital Security Camera Motion Image Service
    • ISO/IEC 29341-5-11:2008 Part 5-11: Digital Security Camera Device Control Protocol - Digital Security Camera Settings Service
    • ISO/IEC 29341-5-12:2008 Part 5-12: Digital Security Camera Device Control Protocol - Digital Security Camera Still Image Service
    • ISO/IEC 29341-6-1:2008 Part 6-1: Heating, Ventilation, and Air Conditioning Device Control Protocol - System Device
    • ISO/IEC 29341-6-2:2008 Part 6-2: Heating, Ventilation, and Air Conditioning Device Control Protocol - Zone Thermostat Device
    • ISO/IEC 29341-6-10:2008 Part 6-10: Heating, Ventilation, and Air Conditioning Device Control Protocol - Control Valve Service
    • ISO/IEC 29341-6-11:2008 Part 6-11: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Operating Mode Service
    • ISO/IEC 29341-6-12:2008 Part 6-12: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Speed Service
    • ISO/IEC 29341-6-13:2008 Part 6-13: Heating, Ventilation, and Air Conditioning Device Control Protocol - House Status Service
    • ISO/IEC 29341-6-14:2008 Part 6-14: Heating, Ventilation, and Air Conditioning Device Control Protocol - Setpoint Schedule Service
    • ISO/IEC 29341-6-15:2008 Part 6-15: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Sensor Service
    • ISO/IEC 29341-6-16:2008 Part 6-16: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Setpoint Service
    • ISO/IEC 29341-6-17:2008 Part 6-17: Heating, Ventilation, and Air Conditioning Device Control Protocol - User Operating Mode Service
    • ISO/IEC 29341-7-1:2008 Part 7-1: Lighting Device Control Protocol - Binary Light Device
    • ISO/IEC 29341-7-2:2008 Part 7-2: Lighting Device Control Protocol - Dimmable Light Device
    • ISO/IEC 29341-7-10:2008 Part 7-10: Lighting Device Control Protocol - Dimming Service
    • ISO/IEC 29341-7-11:2015 Part 7-11: Lighting Device Control Protocol - Switch Power Service
    • ISO/IEC 29341-8-1:2008 Part 8-1: Internet Gateway Device Control Protocol - Internet Gateway Device
    • ISO/IEC 29341-8-2:2008 Part 8-2: Internet Gateway Device Control Protocol - Local Area Network Device
    • ISO/IEC 29341-8-3:2008 Part 8-3: Internet Gateway Device Control Protocol - Wide Area Network Device
    • ISO/IEC 29341-8-4:2008 Part 8-4: Internet Gateway Device Control Protocol - Wide Area Network Connection Device
    • ISO/IEC 29341-8-5:2008 Part 8-5: Internet Gateway Device Control Protocol - Wireless Local Area Network Access Point Device
    • ISO/IEC 29341-8-10:2008 Part 8-10: Internet Gateway Device Control Protocol - Local Area Network Host Configuration Management Service
    • ISO/IEC 29341-8-11:2008 Part 8-11: Internet Gateway Device Control Protocol - Layer 3 Forwarding Service
    • ISO/IEC 29341-8-12:2008 Part 8-12: Internet Gateway Device Control Protocol - Link Authentication Service
    • ISO/IEC 29341-8-13:2008 Part 8-13: Internet Gateway Device Control Protocol - Radius Client Service
    • ISO/IEC 29341-8-14:2008 Part 8-14: Internet Gateway Device Control Protocol - Wide Area Network Cable Link Configuration Service
    • ISO/IEC 29341-8-15:2008 Part 8-15: Internet Gateway Device Control Protocol - Wide Area Network Common Interface Configuration Service
    • ISO/IEC 29341-8-16:2008 Part 8-16: Internet Gateway Device Control Protocol - Wide Area Network Digital Subscriber Line Configuration Service
    • ISO/IEC 29341-8-17:2008 Part 8-17: Internet Gateway Device Control Protocol - Wide Area Network Ethernet Link Configuration Service
    • ISO/IEC 29341-8-18:2008 Part 8-18: Internet Gateway Device Control Protocol - Wide Area Network Internet Protocol Connection Service
    • ISO/IEC 29341-8-19:2008 Part 8-19: Internet Gateway Device Control Protocol - Wide Area Network Plain Old Telephone Service Link Configuration Service
    • ISO/IEC 29341-8-20:2008 Part 8-20: Internet Gateway Device Control Protocol - Wide Area Network Point-to-Point Protocol Connection Service
    • ISO/IEC 29341-8-21:2008 Part 8-21: Internet Gateway Device Control Protocol - Wireless Local Area Network Configuration Service
    • ISO/IEC 29341-9-1:2008 Part 9-1: Imaging Device Control Protocol - Printer Device
    • ISO/IEC 29341-9-2:2008 Part 9-2: Imaging Device Control Protocol - Scanner
    • ISO/IEC 29341-9-10:2008 Part 9-10: Imaging Device Control Protocol - External Activity Service
    • ISO/IEC 29341-9-11:2008 Part 9-11: Imaging Device Control Protocol - Feeder Service
    • ISO/IEC 29341-9-12:2008 Part 9-12: Imaging Device Control Protocol - Print Basic Service
    • ISO/IEC 29341-9-13:2008 Part 9-13: Imaging Device Control Protocol - Scan Service
    • ISO/IEC 29341-10-1:2008 Part 10-1: Quality of Service Device Control Protocol - Quality of Service Architecture
    • ISO/IEC 29341-10-10:2008 Part 10-10: Quality of Service Device Control Protocol - Quality of Service Device
    • ISO/IEC 29341-10-11:2008 Part 10-11: Quality of Service Device Control Protocol - Quality of Service Manager Service
    • ISO/IEC 29341-10-12:2008 Part 10-12: Quality of Service Device Control Protocol - Quality of Service Policy Holder Service
    • ISO/IEC 29341-11-1:2008 Part 11-1: Quality of Service Device Control Protocol - Level 2 - Quality of Service Architecture
    • ISO/IEC 29341-11-2:2008 Part 11-2: Quality of Service Device Control Protocol - Level 2 - Quality of Service Schemas
    • ISO/IEC 29341-11-10:2008 Part 11-10: Quality of Service Device Control Protocol - Level 2 - Quality of Service Device Service
    • ISO/IEC 29341-11-11:2008 Part 11-11: Quality of Service Device Control Protocol - Level 2 - Quality of Service Manager Service
    • ISO/IEC 29341-11-12:2008 Part 11-12: Quality of Service Device Control Protocol - Level 2 - Quality of Service Policy Holder Service
    • ISO/IEC 29341-12-1:2015 Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface Client Device
    • ISO/IEC 29341-12-2:2015 Part 12-2: Remote User Interface Device Control Protocol - Remote User Interface Server Device
    • ISO/IEC 29341-12-10:2015 Part 12-10: Remote User Interface Device Control Protocol - Remote User Interface Client Service
    • ISO/IEC 29341-12-11:2015 Part 12-11: Remote User Interface Device Control Protocol - Remote User Interface Server Service
    • ISO/IEC 29341-13-10:2008 Part 13-10: Device Security Device Control Protocol - Device Security Service
    • ISO/IEC 29341-13-11:2008 Part 13-11: Device Security Device Control Protocol - Security Console Service
    • ISO/IEC 29341-14-3:2011 Part 14-3: Audio Video Device Control Protocol - Level 3 - Media Server Device
    • ISO/IEC 29341-14-12:2011 Part 14-12: Audio Video Device Control Protocol - Level 3 - Audio Video Content Directory Service
    • ISO/IEC 29341-15-10:2011 Part 15-10: Content Synchronization Device Control Protocol - Content Synchronization Service
    • ISO/IEC 29341-16-1:2011 Part 16-1: Low Power Device Control Protocol - Low Power
    • ISO/IEC 29341-16-10:2011 Part 16-10: Low Power Device Control Protocol - Low Power Proxy Service
    • ISO/IEC 29341-16-11:2011 Part 16-11: Low Power Device Control Protocol - Low Power Service
    • ISO/IEC 29341-17-1:2011 Part 17-1: Quality of Service Device Control Protocol - Level 3 - Quality of Service Architecture
    • ISO/IEC 29341-17-10:2011 Part 17-10: Quality of Service Device Control Protocol - Level 3 - Quality of Service Device Service
    • ISO/IEC 29341-17-11:2011 Part 17-11: Quality of Service Device Control Protocol - Level 3 - Quality of Service Manager Service
    • ISO/IEC 29341-17-12:2011 Part 17-12: Quality of Service Device Control Protocol - Level 3 - Quality of Service Policy Holder Service
    • ISO/IEC 29341-17-13:2011 Part 17-13: Quality of Service Device Control Protocol - Level 3 - Quality of Service Device Service - Underlying Technology Interfaces
    • ISO/IEC 29341-18-1:2011 Part 18-1: Remote Access Device Control Protocol - Remote Access Architecture
    • ISO/IEC 29341-18-2:2011 Part 18-2: Remote Access Device Control Protocol - Remote Access Client Device
    • ISO/IEC 29341-18-3:2011 Part 18-3: Remote Access Device Control Protocol - Remote Access Server Device
    • ISO/IEC 29341-18-4:2011 Part 18-4: Remote Access Device Control Protocol - Remote Access Discovery Agent Device
    • ISO/IEC 29341-18-10:2011 Part 18-10: Remote Access Device Control Protocol - Remote Access Inbound Connection Configuration Service
    • ISO/IEC 29341-18-11:2011 Part 18-11: Remote Access Device Control Protocol - Remote Access Discovery Agent Service
    • ISO/IEC 29341-18-12:2011 Part 18-12: Remote Access Device Control Protocol - Remote Access Discovery Agent Synchronization Service
    • ISO/IEC 29341-18-13:2011 Part 18-13: Remote Access Device Control Protocol - Remote Access Transport Agent Configuration Service
    • ISO/IEC 29341-19-1:2011 Part 19-1: Solar Protection Blind Device Control Protocol - Solar Protection Blind Device
    • ISO/IEC 29341-19-10:2011 Part 19-10: Solar Protection Blind Device Control Protocol - Two Way Motion Motor Service
    • ISO/IEC 29341-30-1:2017 Part 30-1: IoT management and control device control protocol - IoT management and control architecture overview
    • ISO/IEC 29341-30-2:2017 Part 30-2: IoT management and control device control protocol - IoT management and control device
    • ISO/IEC 29341-30-10:2017 Part 30-10: IoT management and control device control protocol - Data store service
    • ISO/IEC 29341-30-11:2017 Part 30-11: IoT management and control device control protocol - IoT management and control data model service
    • ISO/IEC 29341-30-12:2017 Part 30-12: IoT management and control device control protocol - IoT management and control transport generic service
  • ISO/IEC 29361:2008 Information technology – Web Services InteroperabilityWS-I Basic Profile Version 1.1
  • ISO/IEC 29362:2008 Information technology – Web Services Interoperability – WS-I Attachments Profile Version 1.0
  • ISO/IEC 29363:2008 Information technology – Web Services Interoperability – WS-I Simple SOAP Binding Profile Version 1.0
  • ISO 29383:2020 Terminology policies — Development and implementation
  • ISO 29404:2015 Ships and marine technology - Offshore wind energy - Supply chain information flow
  • ISO 29461 Air intake filter systems for rotary machinery – Test methods
    • ISO 29461-1:2013 Part 1: Static filter elements
  • ISO 29464:2017 Cleaning of air and other gases – Terminology
  • ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
    • ISO/IEC 29500-1:2016 Part 1: Fundamentals and Markup Language Reference
    • ISO/IEC 29500-2:2012 Part 2: Open Packaging Conventions
    • ISO/IEC 29500-3:2015 Part 3: Markup Compatibility and Extensibility
    • ISO/IEC 29500-4:2016 Part 4: Transitional Migration Features
  • ISO/TS 29585:2010 Health informatics – Deployment of a clinical data warehouse
  • ISO 29621:2017 Cosmetics – Microbiology – Guidelines for the risk assessment and identification of microbiologically low-risk products
  • ISO/IEC 29642:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)
  • ISO 29701:2010 Nanotechnologies – Endotoxin test on nanomaterial samples for in vitro systems – Limulus amebocyte lysate (LAL) test
  • ISO 29781:2008 Prostheses and orthoses – Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth
  • ISO 29782:2008 Prostheses and orthoses – Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation
  • ISO 29783 Prosthetics and orthotics - Vocabulary
    • ISO 29783-1:2008 Part 1: Normal gait
    • ISO 29783-2:2015 Part 2: Prosthetic gait
    • ISO 29783-3:2016 Part 3: Pathological gait (excluding prosthetic gait)
  • ISO/IEC 29794 Information technology – Biometric sample quality
    • ISO/IEC 29794-1:2016 Part 1: Framework
    • ISO/IEC 29794-4:2017 Part 4: Finger image data
    • ISO/IEC TR 29794-5:2010 Part 5: Face image data
    • ISO/IEC 29794-6:2015 Part 6: Iris image data
  • ISO 29821 Condition monitoring and diagnostics of machines – Ultrasound
    • ISO 29821-1:2011 Part 1: General guidelines
    • ISO 29821-2:2016 Part 2: Procedures and validation
  • ISO 29845:2011 Technical product documentation – Document types
  • ISO/IEC 29881:2010 Information technology - Systems and software engineering - FiSMA 1.1 functional size measurement method
  • ISO/TR 29901:2007 Selected illustrations of full factorial experiments with four factors
  • ISO 29990:2010 Learning services for non-formal education and training – Basic requirements for service providers
  • ISO 29991:2014 Language learning services outside formal education – Requirements
  • ISO 29993:2017 Learning services outside formal education – Service requirements

Notes

[edit]
  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

[edit]
  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.
[edit]