User talk:Tilakahuja

Welcome!

Hello, Tilakahuja, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Unfortunately, one or more of the pages you created, such as Tilakahuja, may not conform to some of Wikipedia's guidelines, and may soon be deleted.

There's a page about creating articles you may want to read called Your first article. If you are stuck, and looking for help, please come to the New contributors' help page, where experienced Wikipedians can answer any queries you have! Or, you can just type {{helpme}} on this page, and someone will show up shortly to answer your questions. Here are a few other good links for newcomers:

I hope you enjoy editing here and being a Wikipedian! Please sign your name on talk pages using four tildes (~~~~); this will automatically produce your name and the date. If you have any questions, check out Wikipedia:Questions or ask me on my talk page. Again, welcome! Slon02 (talk) 17:45, 22 May 2011 (UTC)[reply]

Speedy deletion nomination of Tilakahuja

If this is the first article that you have created, you may want to read the guide to writing your first article.
You may want to consider using the Article Wizard to help you create articles.

A tag has been placed on Tilakahuja requesting that it be speedily deleted from Wikipedia. This has been done under section A7 of the criteria for speedy deletion, because the article appears to be about a person or group of people, but it does not indicate how or why the subject is important or significant: that is, why an article about that subject should be included in an encyclopedia. Under the criteria for speedy deletion, such articles may be deleted at any time. Please see the guidelines for what is generally accepted as notable.

If you think that this notice was placed here in error, contest the deletion by clicking on the button labelled "Click here to contest this speedy deletion," which appears inside of the speedy deletion ({{db-...}}) tag (if no such tag exists, the page is no longer a speedy delete candidate). Doing so will take you to the talk page where you will find a pre-formatted place for you to explain why you believe the page should not be deleted. You can also visit the the page's talk page directly to give your reasons, but be aware that once tagged for speedy deletion, if the page meets the criterion, it may be deleted without delay. Please do not remove the speedy deletion tag yourself, but don't hesitate to add information to the page that would render it more in conformance with Wikipedia's policies and guidelines. If the page is deleted, you can contact one of these administrators to request that the administrator userfy the page or email a copy to you. Slon02 (talk) 17:45, 22 May 2011 (UTC)[reply]

MRI Scan A great revloution in Health and Science

What is an MRI SCAN? MRI stands for magnetic resonance imaging. An MRI scan uses a strong magnetic field and radio waves to create pictures, on a computer, of tissues, organs and other structures inside your body. How does an MRI scan work? Your body contains millions of hydrogen atoms. When you are in an MRI scanner:

   * A strong magnetic field aligns particles called protons which are within the hydrogen atoms. All the protons line up in parallel to the magnetic field, like tiny magnets. (Normally the millions of protons all lie in random directions.)
   * Then, short bursts of radio waves are sent from the scanner into your body. The radio waves knock the protons from their position.
   * When the burst of radio waves stops, the protons realign back into place. As they do so they emit radio signals. The protons in different tissues of the body realign at different speeds. Therefore, the signal emitted from different body tissues varies. So, for example, softer tissues can be distinguished from harder tissues on the basis of the signals sent.
   * These signals are detected by a receiving device in the scanner.
   * The receiving device transmits the signals to a computer. The computer creates a picture based on the radio signals emitted from the body.

What does an MRI scan involve? The MRI scanner is like a tunnel about 1.5 meters long surrounded by a large circular magnet. You lie on a couch which then slides into the scanner. A 'receiving device', like an aerial, is placed behind, or around, the part of the body being examined. This detects the tiny radio signals emitted from your body. When each 'picture' is being taken you need to keep still for a few minutes, otherwise the scan picture may be blurred.

The scan itself is painless. The whole procedure can take 15-40 minutes. It may be a little uncomfortable lying still on the couch for this time. Small children may need a general anaesthetic to keep them still long enough for the pictures to be taken. In some cases, an injection of a special contrast dye is given into the bloodstream via a vein on the arm. This helps to give clearer pictures of certain tissues or organs being examined.

The radiographer sits in the control room next to the scanner and observes through the window. However, you can talk to them, usually via an intercom, and you will be observed at all times on a monitor.

The scanner is noisy so you will be given some headphones or earplugs to protect your ears from the noise. Quite often you can listen to the radio through the headphones or bring a CD to listen to. What is an MRI scan used for? An MRI scan can create clear pictures of most parts of the body. So, it is useful for all sorts of reasons where other tests (such as X-rays) do not give enough information required. It is commonly used to get detailed pictures of the brain and spinal cord, to detect abnormalities and tumours. Even torn ligaments around joints can be detected by an MRI scan. So, it is being used more and more following sports injuries. What preparation do I need to do before an MRI scan? Usually very little. Your local hospital should give you information about what is required before you come for the scan. The MRI scanner uses an extremely strong magnet, so people with certain types of medical implant cannot be scanned. This is because the magnet can potentially move medical devices with metal in them, or affect their function.

Therefore, before you enter the scanning area you should be asked if you have any medical devices in your body. (You may have to fill in a safety questionnaire that asks about things that may contain metal.) The following is not a definitive list but may help remind you of the type of things radiographers need to know about:

   * Internal (implanted) defibrillator or pacemaker.
   * Cochlear (ear) implant.
   * Surgical clips such as those used on brain aneurysms.
   * Artificial heart valves.
   * Implanted drug infusion ports.
   * Implanted electronic device, including a cardiac pacemaker.
   * Artificial limbs or metallic joints.
   * Implanted nerve stimulators.
   * Pins, screws, plates, stents or surgical staples.

It is also important to tell the radiographer if you have ever had any metal fragments lodged in your eyes or your body. In some cases you may need an X-ray before an MRI scan to make sure you are safe to enter the scanner. Are there any possible complications MRI scans are painless and safe. Unlike X-rays and some other imaging tests, an MRI scan does not use radiation. However:

   * Rarely, some people have reactions to the contrast dye which is sometimes used.
   * Pregnant women are usually advised not to have an MRI scan unless it is urgent. Although the scan is thought to be safe, the long-term effects of strong magnetic fields on a developing baby are not yet known.

What can I expect after the scan? There are no after-effects from the scan. You can return to your normal activities as soon as the scan is over. The pictures from the scan are studied by an X-ray doctor (a radiologist) who sends a report to the doctor who requested the scan. http://mriscan.blogspot.com/