User:Yugystudios/Sandbox2

This page will be used to revise the article for the Indian locomotive class AP that currently exists as a rough translation from German. The revised article will be moved to the corresponding articlespace when the editing is finished. User:Yugystudios/sandbox3

BESA class AP
EIR locomotive No. 120, built by North British Locomotive Company
Type and origin Power type Steam Designer British Engineering Standards Association Builder Vulcan Foundry (28) North British Locomotive Co. (18) Kitson and Company (12) Total produced 58
Specifications Configuration: ​  • Whyte 4-4-2  • UIC 2′B1′ n2 Gauge 1,676 mm (5 ft 6 in) Leading dia. 3 ft 7 in (1,092 mm) Driver dia. 6 ft 6 in (1,981 mm) Wheelbase: ​  • Leading 7 ft 0 in (2,134 mm)  • Coupled 6 ft 9 in (2,057 mm)  • incl. tender 50 ft 7+1⁄2 in (15,430 mm) (3000-gal tender) Length: ​  • Over buffers 60 ft 6+7⁄8 in (18,463 mm) (3000-gal tender) Width 9 ft 6 in (2,896 mm) Height 13 ft 6 in (4,115 mm) Axle load 17.25 long tons (17.53 t) Service weight 65.00 long tons (66.04 t) Tender weight 39.50 long tons (40.13 t) Water cap. 3,000 or 4,000 or 4,500 imp gal (14,000 or 18,000 or 20,000 L; 3,600 or 4,800 or 5,400 US gal) Firebox: ​  • Grate area 32 sq ft (3.0 m2) Boiler pressure 180 psi (12.4 bar; 12.7 kgf/cm2) Heating surface: ​  • Firebox 1,057 sq ft (98.2 m2)  • Tubes 1,880 sq ft (175 m2)  • Total surface 2,037 sq ft (189.2 m2) Cylinders Two, outside Cylinder size 19 in × 26 in (483 mm × 660 mm)
Career Operators East Indian Railway Company North Western Railway Eastern Bengal Railway

The Class AP (Atlantic Passenger) was a broad gauge 4-4-2 passenger steam locomotive introduced around 1907 on the railways of British India. It was one of the BESA locomotives developed by the British Engineering Standards Committee, later called the British Engineering Standards Association (BESA).

Background

British Indian railways operated numerous steam locomotives built to their own design standards, and at the turn of the century, this created a considerable strain on British locomotive manufacturers who could not keep up with demand. This led to British Indian railways outsourcing production of locomotives to non-British companies, which generated complaints from British locomotive manufacturers, so the BESC was requested by the British Indian government to assemble a locomotive committee which included British locomotive manufacturers to develop standard locomotive classes for British Indian railways in order to ease the strain placed on British locomotive manufacturers. Its first report, compiled in 1903, outlined plans for British Indian standard locomotives, being revised in 1907 and in 1910.

History

The AP class locomotive was first catalogued in the second edition (1907) of the BESA report for British Indian standard steam locomotives with three different tenders: a small one holding 3,000, a medium 4,000 and a large 4,500 gallons of water.

Vulcan Foundry delivered 28 locomotives to the East Indian Railway (EIR), which operated lines from Calcutta towards the west. These locomotives, built according to British design practice, were used to pull express trains; they were numbered 1300 to 1327, and their works numbers were 2330 to 2357 of 1908.

10 locomotives were delivered to the EIR by the North British Locomotive Company in 1908, and a further 8 were delivered in 1909.

The Eastern Bengal Railway received 5 locomotives from Kitson and Company in 1908, and another 2 were delivered in 1909. They were joined in 1930 by five locomotives built by Kitson for the North Western Railway in 1908.

At partition, four of the EBR locomotives went to East Pakistan, and eight to India. Of the 14 remaining EIR locomotives, six went to the Eastern Railway Zone, and the other eight went to the Northern Railway Zone.

• 
  Variant with 3000 gallon tender
• 
  Variant with 4000 gallon tender
• 
  Variant with 4500 gallon tender

Design

The locomotives were designed with two cylinders, a Belpaire firebox, and used saturated steam. The firebox and grate were arranged between the rear driving wheel and the trailing wheel. Placed outside of the frames were the cylinders, and placed between the frames were the Walschaerts valve gear. A small pilot was fitted to the locomotive's buffer beam. The BESA design standards outlined an enclosed cab formed by a half-cab fitted on the tender: however, the locomotives built for the East Indian Railway had tenders without a cab rear wall. The running board was positioned low, so splashers covered the two driving axles. The 3000 and 4000 gallon tenders each had three axles, while the larger 4500 gallon tenders had a pair of two-axle bogies. The two three-axle tender variants had running boards and handrails along the side walls, which made it possible to access the train from the locomotive while it was running. Another peculiarity of the design was the riser arranged in the middle of the dome axes. At 6 ft 6 in (1.98 m) in diameter, the AP class had the largest driving wheels of any steam locomotive used in India.

Similar classes

EM 922 in New Delhi

Locomotive 992 of the EM class, which is on display at the National Rail Museum of India in New Delhi, bears very similar main dimensions to the AP class locomotive; however, it was converted from an E1 class 4-4-0 locomotive of the Great Indian Peninsula Railway (GIPR), to which a trailing axle with an external frame was added. With a diameter of 6 ft 6 in, the driving wheels have the same dimensions as those of the AP class and have a short wheelbase, characteristic of the APs.

References

• Hughes, Hugh (1990). Indian Locomotives: Part 1 – Broad Gauge 1851–1940. Harrow, Middlesex: The Continental Railway Circle. pp. 34, 35, 38, 42, 51, 78, 83, 108. ISBN 0-9503469-8-5. OCLC 21871114.

External links

• Builder's photo of an AP class locomotive built by the North British Locomotive Company