User:Wolf87346/sandbox/Online Electric Vehicle (OLEV)
![]() | This is not a Wikipedia article: It is an individual user's work-in-progress page, and may be incomplete and/or unreliable. For guidance on developing this draft, see Wikipedia:So you made a userspace draft. Find sources: Google (books · news · scholar · free images · WP refs) · FENS · JSTOR · TWL |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f2/SJT_OLEV_bus.jpg/362px-SJT_OLEV_bus.jpg)
The Online Electric Vehicle (OLEV) is an electric vehicle that charges wirelessly while moving using electromagnetic induction (the wireless transfer of power through magnetic fields). It functions by using a segmented "recharging" road that induces a current in "pick-up" modules on the vehicle.
OLEV is the first public transport system that used a "recharging" road and was first launched on March, 9 2010 by The Korea Advanced Institute of Science and Technology (KAIST) [1]. In 2011, a start-up called "OLEV Technologies" was founded in Massachusetts and now serves as the only licensee for the commercialization of OLEV in North and South America.[2]
Mechanical Description
[edit]The OLEV system is split into two main parts: the segmented "recharging" road and the "pick-up" modules on the vehicle.
In the Road
[edit]In the "recharging" road, slim W-shaped ferrite cores (magnetic cores used in induction) are buried 30cm underground in a fish bone like structure. Power cables are wrapped around the center of the fish bone structures to make the "primary coils". This design combines the magnetic fields of the two sides of the cables and shapes the fields in a way that maximizes induction. Moreover, the primary coils are placed in segments across certain spans of the road so that only about 5% to 15% of the road needs to be remodeled. To power the primary coils, the cables are attached to the South Korean national power grid through a power inverter (a device that converts DC electricity into AC electricity). The inverter accepts 3-phase 380 or 440 voltage from the grid to generate 20kHz of AC electricity into the cables. In turn, the cables create a 20kHz magnetic field that sends flux through the slim ferrite cores to the pick-ups on the OLEV. [3][4][5][6]
On the OLEV
[edit]Attached beneath the vehicle, are "pick-up" modules, or the secondary coils, that consist of wide W-shaped ferrite cores with wires wrapped around the center. When the pick-ups "pick up" the flux from the primary coils, each pick-up gains about 17kW of power from the induced current. This power is sent to the electric motor and battery through a regulator (a managing device that can distribute power based on need), thereby charging the OLEV wirelessly.[3][4][5][6]
Model | Weight | Core Shape in
Primary Coil |
Core Shape in
Secondary Coil |
Air Gap Between
Road and Pick-up |
Power Efficiency | Power Gained per Pick-up | Electrical Horse Power | Current in Primary Coil | Additional Mechanism |
---|---|---|---|---|---|---|---|---|---|
Generation 1 (Small Cart) | 10kg | E shape | E shape | 1 cm | 80% | 3kW | 4.02Hp | 100 Amp | Vertical Alignment
Mechanism for 3mm |
Generation 2 (Bus) | 80kg | U shape | Long, flat | 17 cm | 72% | 6kW | 8.04Hp | 200 Amp | Return cables for primary coils |
Generation 3 (SUV) | 110kg | Slim W shape | Wide W shape | 17 cm | 71% | 17kW | 22.79Hp | 200 Amp | None |
As seen in the table above, the generation 1 OLEV lacks a realistic margin for error. The lower current means a smaller magnetic field and requires the secondary coil to be very close to the floor, which can be an issue while driving. Moreover, if the primary and secondary coils are vertically misaligned by a distance over 3mm, the power efficiency drops greatly.
To fix these issues, KAIST came up with the generation 2 OLEV. In the gen 2 OLEV, the current in the primary coil was doubled to create a stronger magnetic field that allows for a larger air gap. The ferrite cores in the primary coils were changed to a U shape and the cores in the secondary coil were changed a flat board shape to pick-up as much flux as possible. This design allows the vertical misalignment to be about 20cm with a 50% power efficiency. However, the U shaped cores also require return cables which bumps up the cost of production. Overall, the gen 2 made up for the gen 1's margins, but was more costly.
In response to the cost issue of gen 2, the third generation OLEV was developed. The third generation OLEV, uses ultra-slim W-shaped ferrite cores in the primary coil to reduce the amount of ferrite used to 1/5 of gen 2 and to remove the need of return cables. The secondary coil uses a thicker variation of the w-shaped cores as a way to make up for the lesser area for the magnetic flux to flow through compared to gen 2. Overall, the gen 3 OLEV made up for the gen 1's small margins and gen 2's increased cost.
Benefits
- Zero emissions
- 31% operating costs compared to gas powered counterparts
- Lower maintenance and manufacturing costs
- No charging station necessary
- Can be stored like regular vehicles
Issues
- Modern power grids cannot handle OLEV's on a large scale
- Installation is costly
- Can run out of power in heavy traffic
- 40mph speed limit
- Cannot operate during power outages
Patents
[edit]KAIST announced it has applied for more than 120 patents[9] in connection with OLEV.
Recognition
[edit]In November 2010, KAIST's Road-Embedded Rechargers was selected as Time's The 50 Best Inventions of 2010.[10][11]
See also
[edit]- ABB TOSA Flash Mobility, Clean City, Smart Bus[12]
- Ground-level power supply
- Gyrobus
- Inductive charging of electric vehicles
References
[edit]- ^ Salmon, Andrew (2010-10-03). "Korea unveils the 'future of transport' — the Online Electric Vehicle | The Times". The Times.
- ^ "Olev Technologies - About Us - OLEV Story". olevtech.com. Retrieved 2016-10-27.
- ^ a b c Lee, S.; Huh, J.; Park, C.; Choi, N. S.; Cho, G. H.; Rim, C. T. (2010-09-01). "On-Line Electric Vehicle using inductive power transfer system". 2010 IEEE Energy Conversion Congress and Exposition: 1598–1601. doi:10.1109/ECCE.2010.5618092.
- ^ a b Shim, H. W.; Kim, J. W.; Cho, D. H. (2014-05-01). "An analysis on power variance of SMFIR structure". 2014 IEEE Wireless Power Transfer Conference (WPTC): 189–192. doi:10.1109/WPT.2014.6839579.
- ^ a b Yoon, Lan (2013-08-07). "KAIST's wireless Online Electric Vehicle (OLEV) runs inner city roads". www.kaist.edu. Kaist. Retrieved 2016-11-03.
- ^ a b Interdisciplinary Design: Proceedings of the 21st CIRP Design Conference. Mary Kathryn Thompson. ISBN 9788989693291.
- ^ Fazal, Rehan (2013-10-09). "Online Electric Vehicle".
{{cite journal}}
: Cite journal requires|journal=
(help) - ^ Suh, N.P.; Cho, D.H.; Rim, C.T. (2011). "Design of On-Line Electric Vehicle (OLEV)". springerprofessional.de. Springer Berlin Heidelberg.
- ^ Salmon, Andrew (2010-03-09). "S.Korea unveils 'recharging road' for eco-friendly buses". The Times. London. Retrieved 2010-07-20.
{{cite news}}
: Cite has empty unknown parameter:|coauthors=
(help) - ^ "KAIST's Road-Embedded Recharger Named Among Best Inventions of 2010". The Chosun Ilbo. 2010-11-15. Retrieved 2010-11-15.
- ^ Rachelle Dragani (2010-11-11). "Road-Embedded Rechargers - The 50 Best Inventions of 2010 - TIME". Time Magazine. Retrieved 2010-11-15.
- ^ "ABB demonstrates technology to power flash charging electric bus in 15 seconds". www.abb.com. Retrieved 2016-10-27.
[[Category:Electric vehicle technologies]]