Jump to content

User:Veggietaquito/PH

From Wikipedia, the free encyclopedia

Article Draft

[edit]
Test tubes containing solutions of pH 1–10 colored with an indicator

For other uses, see PH (disambiguation).

"Negative pH" redirects here. For the band, see Negative pH (band).


In chemistry, pH (/pˈ/), also referred to as acidity, historically denotes "potential of hydrogen" (or "power of hydrogen").[1] It is a scale used to specify the acidity or basicity of an aqueous solution. Acidic solutions (solutions with higher concentrations of H+ ions) are measured to have lower pH values than basic or alkaline solutions.


The pH scale is logarithmic and inversely indicates the activity of hydrogen ions in the solution.[2]

where [H+] is the equilibrium molar concentration (mol dm−3) of H+ in the solution. At 25 °C (77°F), solutions with a pH less than 7 are acidic, and solutions with a pH greater than 7 are basic. Solutions with a pH of 7 at this temperature are neutral (i.e. have the same concentration of H+ ions as OH ions, i.e. the same as pure water). The neutral value of the pH depends on the temperature and is lower than 7 if the temperature increases above 25 °C. The pH value can be less than 0 for very concentrated strong acids or greater than 14 for very concentrated strong bases.[3]


The pH scale is traceable to a set of standard solutions whose pH is established by international agreement.[4] Primary pH standard values are determined using a concentration cell with transference by measuring the potential difference between a hydrogen electrode and a standard electrode such as the silver chloride electrode. The pH of aqueous solutions can be measured with a glass electrode and a pH meter or a color-changing indicator. Measurements of pH are important in chemistry, agronomy, medicine, water treatment, and many other applications.

History

[edit]

In 1909, the Danish chemist Søren Peter Lauritz Sørensen introduced the concept of pH at the Carlsberg Laboratory[5], originally using the notation "pH•", with H• as a subscript to the lowercase p. The concept was later revised in 1924 to the modern pH to accommodate definitions and measurements in terms of electrochemical cells.

For the sign p, I propose the name 'hydrogen ion exponent' and the symbol pH•. Then, for the hydrogen ion exponent (pH•) of a solution, the negative value of the Briggsian logarithm of the related hydrogen ion normality factor is to be understood.[5]

Sørensen did not explain why he used the letter p, and the exact meaning of the letter is still disputed.[6] Sørensen described a way of measuring pH using potential differences, and it represents the negative power of 10 in the concentration of hydrogen ions. The letter p could stand for the French puissance, German Potenz, or Danish potens, all meaning "power", or it could mean "potential". All of these words start with the letter p in French, German, and Danish, which where the languages Sørensen published in (Carlsberg Laboratory was French-speaking, German was the dominant language of scientific publishing, and Sørensen was Danish). He also used the letter q in much the same way elsewhere in the paper, and he might have arbitrarily labelled the test solution "p" and the reference solution "q"; these letters are often paired.[7] Some literature sources suggest that "pH" stands for the Latin term pondus hydrogenii (quantity of hydrogen) or potentia hydrogenii (power of hydrogen), although this is not supported by Sørensen's writings.[8][9][10]


In modern chemistry, the p stands for "the negative decimal logarithm of", and is used in the term pKa for acid dissociation constants[11] and pOH for the equivalent for hydroxide ions.


Bacteriologist Alice Catherine Evans, who influenced dairying and food safety, credited William Mansfield Clark and colleagues, including herself, with developing pH measuring methods in the 1910s, which had a wide influence on laboratory and industrial use thereafter. In her memoir, she does not mention how much, or how little, Clark and colleagues knew about Sørensen's work a few years prior.[12] She said:

In these studies [of bacterial metabolism] Dr. Clark's attention was directed to the effect of acid on the growth of bacteria. He found that it is the intensity of the acid in terms of hydrogen-ion concentration that affects their growth. But existing methods of measuring acidity determined the quantity, not the intensity, of the acid. Next, with his collaborators, Dr. Clark developed accurate methods for measuring hydrogen-ion concentration. These methods replaced the inaccurate titration method of determining the acid content in use in biologic laboratories throughout the world. Also they were found to be applicable in many industrial and other processes in which they came into wide usage.[12]

The first electronic method for measuring pH was invented by Arnold Orville Beckman, a professor at the California Institute of Technology in 1934.[13] It was in response to a request from the local citrus grower Sunkist, which wanted a better method for quickly testing the pH of lemons they were picking from their nearby orchards.[14]

Definition

[edit]

pH

[edit]

The pH of a solution is defined as the decimal logarithm of the reciprocal of the hydrogen ion activity, aH+.[15] Mathematically, pH is expressed as:


For example, for a solution with a hydrogen ion activity of 5×10−6 (i.e., the concentration of hydrogen ions in moles per litre), the pH of the solution can be calculated as follows:


Consider the following example: a quantity of 107 moles of pure water at 25°C (pH = 7), or 180 metric tonnes (18×107 g), contains close to 18 grams of dissociated hydrogen ions. Note that pH depends on temperature. For instance at 0°C the pH of pure water is about 7.47. At 25°C it is 7.00, and at 100°C it is 6.14.


The concept of pH was developed because ion-selective electrodes, which are used to measure pH, respond to activity. The electrode potential, E, follows the Nernst equation for the hydrogen ion, which can be expressed as:

where E is a measured potential, E0 is the standard electrode potential, R is the gas constant, T is the temperature in kelvins, F is the Faraday constant. For H+, the number of electrons transferred is one. The electrode potential is proportional to pH when pH is defined in terms of activity.


The precise measurement of pH is presented in International Standard ISO 31-8 as follows:[16] A galvanic cell is set up to measure the electromotive force (e.m.f.) between a reference electrode and an electrode sensitive to the hydrogen ion activity when they are both immersed in the same aqueous solution. The reference electrode may be a silver chloride electrode or a calomel electrode, and the hydrogen-ion selective electrode is a standard hydrogen electrode.

Reference electrode | concentrated solution of KCl || test solution | H2 | Pt


Firstly, the cell is filled with a solution of known hydrogen ion activity and the electromotive force, ES, is measured. Then the electromotive force, EX, of the same cell containing the solution of unknown pH is measured.

The difference between the two measured electromotive force values is proportional to pH. This method of calibration avoids the need to know the standard electrode potential. The proportionality constant, 1/z, is ideally equal to , the "Nernstian slope".


In practice, a glass electrode is used instead of the cumbersome hydrogen electrode. A combined glass electrode has an in-built reference electrode. It is calibrated against buffer solutions of known hydrogen ion activity. IUPAC (International Union of Pure and Applied Chemistry) has proposed the use of a set of buffer solutions of known H+ activity.[17] Two or more buffer solutions are used in order to accommodate the fact that the "slope" may differ slightly from ideal. To calibrate the electrode, it is first immersed in a standard solution, and the reading on a pH meter is adjusted to be equal to the standard buffer's value. The reading from a second standard buffer solution is then adjusted using the "slope" control to be equal to the pH for that solution. Further details, are given in the IUPAC recommendations.[15] When more than two buffer solutions are used the electrode is calibrated by fitting observed pH values to a straight line with respect to standard buffer values. Commercial standard buffer solutions usually come with information on the value at 25 °C and a correction factor to be applied for other temperatures.


The pH scale is logarithmic and therefore pH is a dimensionless quantity.[18] The pH scale ranges from 0 to 14, with a pH of 7 indicating neutrality, values less than 7 indicating acidity, and values greater than 7 indicating basicity. The pH scale is based on the hydrogen ion concentration, with each pH unit representing a tenfold difference in hydrogen ion concentration.

p[H]

[edit]

This was the original definition of Sørensen in 1909,[19] which was superseded in favor of pH in 1924. [H] is the concentration of hydrogen ions, denoted [H+] in modern chemistry, which appears to have units of concentration. More correctly, the thermodynamic activity of H+ in dilute solution should be replaced by [H+]/c0, where the standard state concentration c0 = 1 mol/L. This ratio is a pure number whose logarithm can be defined.


It is possible to measure the concentration of hydrogen ions directly using an electrode calibrated in terms of hydrogen ion concentrations. One common method is to titrate a solution of known concentration of a strong acid with a solution of known concentration of strong base in the presence of a relatively high concentration of background electrolyte. By knowing the concentrations of the acid and base, the concentration of hydrogen ions can be calculated and the measured potential can be correlated with concentrations. The calibration is usually carried out using a Gran plot.[20] This procedure makes the activity of hydrogen ions equal to the numerical value of concentration.


The glass electrode (and other ion selective electrodes) should be calibrated in a medium similar to the one being investigated. For instance, if one wishes to measure the pH of a seawater sample, the electrode should be calibrated in a solution resembling seawater in its chemical composition.


The difference between p[H] and pH is quite small, and it has been stated that pH = p[H] + 0.04.[21] However, it is common practice to use the term "pH" for both types of measurement.

pOH

[edit]
Relation between pH and pOH. Red represents the acidic region. Blue represents the basic region.

pOH is sometimes used as a measure of the concentration of hydroxide ions, OH. pOH values are derived from pH measurements. The concentration of hydroxide ions in water is related to the concentration of hydrogen ions by

where KW is the self-ionization constant of water. Taking logarithms


So, at room temperature, pOH ≈ 14 − pH. However this relationship is not strictly valid in other circumstances, such as in measurements of soil alkalinity.

Measurement

[edit]

pH Indicators

[edit]
Average pH of common solutions
Substance pH range Type
Battery acid < 1 Acid
Gastric acid 1.0 – 1.5
Vinegar 2.5
Orange juice 3.3 – 4.2
Black coffee 5 – 5.03
Milk 6.5 – 6.8
Pure water at 25 °C 7 Neutral
Sea water 7.5 – 8.4 Base
Ammonia 11.0 – 11.5
Bleach 12.5
Lye 13.0 – 13.6

pH can be measured using indicators, which change color depending on the pH of the solution they are in. By comparing the color of a test solution to a standard color chart, the pH can be estimated to the nearest whole number. For more precise measurements, the color can be measured using a colorimeter or spectrophotometer. Universal indicator is a mixture of several indicators that can provide a continuous color change over a range of pH values, typically from about pH 2 to pH 10. Universal indicator paper is made from absorbent paper that has been impregnated with universal indicator. An alternative method of measuring pH is using an electronic pH meter, which directly measures the voltage difference between a pH-sensitive electrode and a reference electrode.

Non-aqueous solutions

[edit]

pH values can be measured in non-aqueous solutions, but they are based on a different scale from aqueous pH values, because the standard states used for calculating hydrogen ion concentrations (activities) are different. The hydrogen ion activity, aH+, is defined[22][23] as:

where μH+ is the chemical potential of the hydrogen ion, is its chemical potential in the chosen standard state, R is the gas constant and T is the thermodynamic temperature. Therefore, pH values on the different scales cannot be compared directly because of differences in the solvated proton ions, such as lyonium ions, which require an intersolvent scale which involves the transfer activity coefficient of hydronium/lyonium ion.

pH is an example of an acidity function, but there are others that can be defined. For example, the Hammett acidity function, H0, has been developed in connection with superacids.

Unified absolute pH scale

[edit]

In 2010, a new approach to measuring pH was proposed, called the "unified absolute pH scale". This approach allows for a common reference standard to be used across different solutions, regardless of their pH range. The unified absolute pH scale is based on the absolute chemical potential of the proton, as defined by the Lewis acid–base theory. This scale is applicable to liquids, gases, and even solids.[24]

Extremes of pH measurements

[edit]

The measurement of pH can become difficult at extremely acidic or alkaline conditions, such as below pH 2.5 (ca. 0.003 mol/dm3 acid) or above pH 10.5 (ca. 0.0003 mol/dm3 alkaline). This is due to the breakdown of the Nernst equation in this conditions when using a glass electrode. There are several factors contribute to this problem. Firstly, liquid junction potentials may not be independent of pH.[25] Secondly, the high ionic strength of concentrated solutions can affect the electrode potentials. At high pH the glass electrode may be affected by "alkaline error", because the electrode becomes sensitive to the concentration of cations such as Na+ and K+ in the solution.[26] To overcome these problems, specially constructed electrodes are available.

Runoff from mines or mine tailings can produce some extremely low pH values.[27]

Applications

[edit]

The pH scale ranges from 0 to 14, with 7 being neutral. Pure water has a pH of 7 at 25°C, meaning it is neutral. When an acid is dissolved in water, the pH will be less than 7, while a base, or alkali, will have a pH greater than 7. A strong acid, such as hydrochloric acid, at concentration 1 mol dm−3 has a pH of 0, while a strong alkali like sodium hydroxide, at the same concentration, has a pH of 14. Since pH is a logarithmic scale, a difference of one pH unit is equivalent to a tenfold difference in hydrogen ion concentration.

It's important to note that neutrality isn't exactly 7 at 25°C, although it's a good approximation in most cases. Neutrality occurs when the concentration of hydrogen ions ([H+]) equals the concentration of hydroxide ions ([OH]), or when their activities are equal. Since self-ionization of water holds the product of these concentration [H+]/M×[OH]/M = Kw, it can be seen that at neutrality [H+]/M = [OH]/M = Kw, or pH = pKw/2. pKw is approximately 14 but depends on ionic strength and temperature, and so the pH of neutrality does also. Pure water and a solution of NaCl in pure water are both neutral, since dissociation of water produces equal numbers of both ions. However the pH of the neutral NaCl solution will be slightly different from that of neutral pure water because the hydrogen and hydroxide ions' activity is dependent on ionic strength, so Kw varies with ionic strength.

When pure water is exposed to air, it becomes mildly acidic. This is because water absorbs carbon dioxide from the air, which is then slowly converted into bicarbonate and hydrogen ions (essentially creating carbonic acid).

CO
2
+ H
2
O ⇌ HCO
3
+ H+

pH in Soil

[edit]

Classification of soil pH ranges

Nutritional elements availability within soil varies with pH. Light blue color represents the ideal range for most plants.

The United States Department of Agriculture Natural Resources Conservation Service, formerly Soil Conservation Service classifies soil pH ranges as follows:[28]

Denomination pH range
Ultra acidic < 3.5
Extremely acidic 3.5–4.4
Very strongly acidic 4.5–5.0
Strongly acidic 5.1–5.5
Moderately acidic 5.6–6.0
Slightly acidic 6.1–6.5
Neutral 6.6–7.3
Slightly alkaline 7.4–7.8
Moderately alkaline 7.9–8.4
Strongly alkaline 8.5–9.0
Very strongly alkaline 9.0–10.5
Hyper alkaline > 10.5

In Europe, topsoil pH is influenced by soil parent material, erosional effects, climate and vegetation. A recent map[29] of topsoil pH in Europe shows the alkaline soils in Mediterranean, Hungary, East Romania, North France. Scandinavian countries, Portugal, Poland and North Germany have more acid soils.

Measuring soil pH

[edit]

Soil in the field is a heterogeneous colloidal system that comprises sand, silt, clays, microorganisms, plant roots, and other living cells and decaying organic material. The pH of soil is a critical factor that affects many processes and properties, including those relevant to soil and environmental scientists, farmers, and engineers.[30] To measure the concentration of the H+ in soil, researchers typically take soil samples from a specific depth and bring them to the laboratory. The samples are then homogenized, sieved, and sometimes dried before analysis.


To determine the pH of the soil sample, a small amount of soil (typically 5 grams of field-moist soil) is mixed with distilled water or 0.01 M CaCl2 solution. The mixture is stirred vigorously and allowed to settle for 15–20 minutes, during which time the sand and silt particles settle out while the clays and other colloids remain suspended in the overlying water (aqueous phase). A pH electrode connected to a pH meter is calibrated with buffered solutions of known pH before being inserting into the upper portion of the aqueous phase, and the pH is measured. A combination pH electrode incorporates both the H+ sensing electrode (glass electrode) and a reference electrode that provides a pH-insensitive reference voltage and a salt bridge to the hydrogen electrode. In other configurations, the glass and reference electrodes are separate and attach to the pH meter in two ports. The pH meter measures the potential (voltage) difference between the two electrodes and converts it to pH. The separate reference electrode is usually the calomel electrode, the silver-silver chloride electrode is used in the combination electrode.[30]


There are several uncertainties in measuring soil pH this way. Since an electrical potential difference between the glass and reference electrodes is measured, the activity of H+ is quantified, rather than concentration. The H+ activity is sometimes called the "effective H+ concentration" and is related to the chemical potential of the proton and its ability to do chemical and electrical work in the soil solution in equilibrium with the solid phases.[31] Clay and organic matter particles carry negative charge on their surfaces, and H+ ions attracted to them are in equilibrium with H+ ions in the soil solution. The measured pH is determined in the aqueous phase only, but the value obtained is affected by the presence and nature of soil colloids and the ionic strength of the aqueous phase. Changing the water-to-soil ratio in the mixture can alter the pH by disturbing the water-colloid equilibrium, particularly the ionic strength. Using 0.01 M CaCl2 obviates this effect of water-to-soil ratio and gives a more consistent approximation of soil pH that relates to plant root growth, rhizosphere and microbial activity, drainage water acidity, and chemical processes in the soil. Using 0.01 M CaCl2 brings all of the soluble ions in the aqueous phase closer to the colloidal surfaces, and allows the H+ activity to be measured closer to them. This approach is especially useful for comparing soil samples from different locations and times.

pH in nature

[edit]
Lemon juice tastes sour because it contains 5% to 6% citric acid and has a pH of 2.2 (high acidity).

Plants contain pH-dependent pigments that can be used as pH indicators, such as those found in hibiscus, red cabbage (anthocyanin), and grapes (red wine). Citrus fruits have acidic jiuice primarily due to the presence of citric acid, while other carboxylic acids can be found in various living systems. For instance, muscle activity results in the production of lactic acid. The protonation state of phosphate derivatives, including ATP, is pH-dependent. Hemoglobin, an oxygen-transport enzyme, is also affected by pH in a phenomenon known as the Root effect.

pH in Seawater

[edit]

The pH of seawater is typically limited to a range between 7.4 and 8.5.[32] It plays an important role in the ocean's carbon cycle, and there is evidence of ongoing ocean acidification caused by carbon dioxide emissions.[33] However, pH measurement is complicated by the chemical properties of seawater, and several distinct pH scales exist in chemical oceanography.[34]


As part of its operational definition of the pH scale, the IUPAC defines a series of buffer solutions across a range of pH values (often denoted with National Bureau of Standards (NBS) or National Institute of Standards and Technology (NIST) designation). These solutions have a relatively low ionic strength (≈0.1) compared to that of seawater (≈0.7), and, as a consequence, are not recommended for use in characterizing the pH of seawater, since the ionic strength differences cause changes in electrode potential. To resolve this problem, an alternative series of buffers based on artificial seawater was developed.[35] This new series resolves the problem of ionic strength differences between samples and the buffers, and the new pH scale is referred to as the 'total scale', often denoted as pHT. The total scale was defined using a medium containing sulfate ions. These ions experience protonation, H+ + SO2−
4
↔ HSO
4
, such that the total scale includes the effect of both protons (free hydrogen ions) and hydrogen sulfate ions:

[H+]T = [H+]F + [HSO
4
]


An alternative scale, the 'free scale', often denoted 'pHF', omits this consideration and focuses solely on [H+]F, in principle making it a simpler representation of hydrogen ion concentration. Only [H+]T can be determined,[36] therefore [H+]F must be estimated using the [SO2−
4
] and the stability constant of HSO
4
, K*
S
:

[H+]F = [H+]T − [HSO
4
] = [H+]T ( 1 + [SO2−
4
] / K*
S
)−1


However, it is difficult to estimate K*
S
in seawater, limiting the utility of the otherwise more straightforward free scale.


Another scale, known as the 'seawater scale', often denoted 'pHSWS', takes account of a further protonation relationship between hydrogen ions and fluoride ions, H+ + F ⇌ HF. Resulting in the following expression for [H+]SWS:

[H+]SWS = [H+]F + [HSO
4
] + [HF]


However, the advantage of considering this additional complexity is dependent upon the abundance of fluoride in the medium. In seawater, for instance, sulfate ions occur at much greater concentrations (>400 times) than those of fluoride. As a consequence, for most practical purposes, the difference between the total and seawater scales is very small.

The following three equations summarize the three scales of pH:

pHF = −log [H+]F
pHT = −log([H+]F + [HSO
4
]) = −log[H+]T
pHSWS = −log(H+]F + [HSO
4
] + [HF]) = −log[v]SWS


In practical terms, the three seawater pH scales differ in their values up to 0.10 pH units, differences that are much larger than the accuracy of pH measurements typically required, in particular, in relation to the ocean's carbonate system.[34] Since it omits consideration of sulfate and fluoride ions, the free scale is significantly different from both the total and seawater scales. Because of the relative unimportance of the fluoride ion, the total and seawater scales differ only very slightly.

pH in Living Systems

[edit]
pH in living systems[37]
Compartment pH
Gastric acid 1.5–3.5[38]
Lysosomes 4.5[39]
Human skin 4.7[40]
Granules of chromaffin cells 5.5
Urine 6.0
Cytosol 7.2
Blood (natural pH) 7.34–7.45[39]
Cerebrospinal fluid (CSF) 7.5
Mitochondrial matrix 7.5
Pancreas secretions 8.1

In living organisms, the pH of various body fluids, cellular compartments, and organs is tightly regulated to maintain a state of acid-base balance known as acid–base homeostasis. Acidosis, defined by a pH below 7.35, is the most common disorder of acid–base homeostasis and occurs when there is an excess of acid in the body. In contrast, alkalosis is characterized by excessively high blood pH.


Blood pH is usually slightly basic, with a pH of 7.365, referred to as physiological pH in biology and medicine. Plaque formation in teeth can create a local acidic environment that results in tooth decay through demineralization. Enzymes and other proteins have an optimal pH range for function and can become inactivated or denatured outside this range.

pH Calculations

[edit]

When calculating the pH of a solution containing acids and/or bases, a chemical speciation calculation is used to determine the concentration of all chemical species present in the solution. The complexity of the procedure depends on the nature of the solution. Strong acids and bases are compounds that are almost completely dissociated in water, which simplifies the calculation. However, for weak acids, a quadratic equation must be solved, and for weak bases, a cubic equation is required. In general, a set of non-linear simultaneous equations must be solved.


Water itself is a weak acid and a weak base, so its dissociation must be takent into account at high pH and low solute concentration (see amphoterism). It dissociates according to the equilibrium

2 H2O ⇌ H3O+ (aq) + OH (aq)

with a dissociation constant, Kw defined as

where [H+] stands for the concentration of the aqueous hydronium ion and [OH] represents the concentration of the hydroxide ion. This equilibrium needs to be taken into account at high pH and when the solute concentration is extremely low.

Strong acids and bases

[edit]

Strong acids and bases are compounds that are essentially fully dissociated in water. This means that in an acidic solution, the concentration of hydrogen ions (H+) can be considered equal to the concentration of the acid. Similarly, in a basic solution, the concentration of hydroxide ions (OH-) can be considered equal to the concentration of the base. The pH of a solution is defined as the negative logarithm of the concentration of H+, and the pOH is defined as the negative logarithm of the concentration of OH-. For example, the pH of a 0.01M solution of hydrochloric acid (HCl) is equal to 2 (pH = −log10(0.01)), while the pOH of a 0.01M solution of sodium hydroxide (NaOH) is equal to 2 (pOH = −log10(0.01)), which corresponds to a pH of about 12.


However, self-ionization of water must also be considered when concentrations of a strong acid or base is very low or high. For instance, a 5×10−8M solution of HCl would be expected to have a pH of 7.3 based on the above procedure, which is incorrect as it is acidic and should have a pH of less than 7. In such cases, the system can be treated as a mixture of the acid or base and water, which is an amphoteric substance. By accounting for the self-ionization of water, the true pH of the solution can be calculated. For example, a 5×10−8M solution of HCl would have a pH of 6.89 when treated as a mixture of HCl and water. The self-ionization equilibrium of solutions of sodium hydroxide at higher concentrations must also be considered.[41]

Weak acids and bases

[edit]

A weak acid or the conjugate acid of a weak base can be treated using the same formalism.

  • Acid HA: HA ⇌ H+ + A
  • Base A: HA+ ⇌ H+ + A


First, an acid dissociation constant is defined as follows. Electrical charges are omitted from subsequent equations for the sake of generality

and its value is assumed to have been determined by experiment. This being so, there are three unknown concentrations, [HA], [H+] and [A] to determine by calculation. Two additional equations are needed. One way to provide them is to apply the law of mass conservation in terms of the two "reagents" H and A.

C stands for analytical concentration. In some texts, one mass balance equation is replaced by an equation of charge balance. This is satisfactory for simple cases like this one, but is more difficult to apply to more complicated cases as those below. Together with the equation defining Ka, there are now three equations in three unknowns. When an acid is dissolved in water CA = CH = Ca, the concentration of the acid, so [A] = [H]. After some further algebraic manipulation an equation in the hydrogen ion concentration may be obtained.


Solution of this quadratic equation gives the hydrogen ion concentration and hence p[H] or, more loosely, pH. This procedure is illustrated in an ICE table which can also be used to calculate the pH when some additional (strong) acid or alkaline has been added to the system, that is, when CA ≠ CH.


For example, what is the pH of a 0.01M solution of benzoic acid, pKa = 4.19?

  • Step 1:
  • Step 2: Set up the quadratic equation.
  • Step 3: Solve the quadratic equation.


For alkaline solutions, an additional term is added to the mass-balance equation for hydrogen. Since the addition of hydroxide reduces the hydrogen ion concentration, and the hydroxide ion concentration is constrained by the self-ionization equilibrium to be equal to , the resulting equation is:

General method

[edit]

Some systems, such as with polyprotic acids, are amenable to spreadsheet calculations.[42] With three or more reagents or when many complexes are formed with general formulae such as ApBqHr, the following general method can be used to calculate the pH of a solution. For example, with three reagents, each equilibrium is characterized by an equilibrium constant, β.


Next, write down the mass-balance equations for each reagent:

Note that there are no approximations involved in these equations, except that each stability constant is defined as a quotient of concentrations, not activities. Much more complicated expressions are required if activities are to be used.


There are three non-linear simultaneous equations in the three unknowns, [A], [B] and [H]. Because the equations are non-linear and their concentrations may range over many powers of 10, the solution of these equations is not straightforward. However, many computer programs are available which can be used to perform these calculations. There may be more than three reagents. The calculation of hydrogen ion concentrations, using this approach, is a key element in the determination of equilibrium constants by potentiometric titration.

See also

[edit]

References

[edit]
  1. ^ Jensen, William B. (2004). "The Symbol for pH" (PDF). Journal of Chemical Education. 81 (1): 21. Bibcode:2004JChEd..81...21J. doi:10.1021/ed081p21. Archived (PDF) from the original on 14 December 2019. Retrieved 15 July 2020.
  2. ^ Bates, Roger G. Determination of pH: theory and practice. Wiley, 1973.
  3. ^ Lim, Kieran F. (2006). "Negative pH Does Exist". Journal of Chemical Education. 83 (10): 1465. Bibcode:2006JChEd..83.1465L. doi:10.1021/ed083p1465.
  4. ^ Covington, A. K.; Bates, R. G.; Durst, R. A. (1985). "Definitions of pH scales, standard reference values, measurement of pH, and related terminology" (PDF). Pure Appl. Chem. 57 (3): 531–542. doi:10.1351/pac198557030531. S2CID 14182410. Archived (PDF) from the original on 24 September 2007.
  5. ^ a b Sørensen, S. P. L. (1909). "Über die Messung und die Bedeutung der Wasserstoffionenkonzentration bei enzymatischen Prozessen" (PDF). Biochem. Z. 21: 131–304. Archived (PDF) from the original on 15 April 2021. Retrieved 22 March 2021. Original German: Für die Zahl p schlage ich den Namen Wasserstoffionenexponent und die Schreibweise pH• vor. Unter dem Wasserstoffionexponenten (pH•) einer Lösungwird dann der Briggsche Logarithmus des reziproken Wertes des auf Wasserstoffionenbezagenen Normalitäts faktors de Lösungverstanden. Two other publications appeared in 1909, one in French and one in Danish.
  6. ^ Francl, Michelle (August 2010). "Urban legends of chemistry". Nature Chemistry. 2 (8): 600–601. Bibcode:2010NatCh...2..600F. doi:10.1038/nchem.750. ISSN 1755-4330. PMID 20651711. Archived from the original on 6 August 2020. Retrieved 21 July 2019.
  7. ^ Myers, Rollie J. (2010). "One-Hundred Years of pH". Journal of Chemical Education. 87 (1): 30–32. Bibcode:2010JChEd..87...30M. doi:10.1021/ed800002c.
  8. ^ Otterson, David W. (2015). "Tech Talk: (11) pH Measurement and Control Basics". Measurement and Control. 48 (10): 309–312. doi:10.1177/0020294015600474. S2CID 110716297. Retrieved 16 June 2022.
  9. ^ Lian, Ying; Zhang, Wei; Ding, Longjiang; Zhang, Xiaoai; Zhang, Yinglu; Wang, Xu-dong (2019). "Nanomaterials for Intracellular pH Sensing and Imaging". Novel Nanomaterials for Biomedical, Environmental and Energy Applications. Micro and Nano Technologies: 241–273. doi:10.1016/B978-0-12-814497-8.00008-4. ISBN 9780128144978. S2CID 104410918. Retrieved 16 June 2022.
  10. ^ Bradley, David (21 February 2018). "When it comes to caustic wit and an acid tongue, mind your Ps and Qs". Materials Today. Retrieved 16 June 2022.
  11. ^ Nørby, Jens (2000). "The origin and the meaning of the little p in pH". Trends in Biochemical Sciences. 25 (1): 36–37. doi:10.1016/S0968-0004(99)01517-0. PMID 10637613.
  12. ^ a b Evans, Alice C. (1963). "Memoirs" (PDF). NIH Office of History. National Institutes of Health Office of History. Archived from the original (PDF) on 15 December 2017. Retrieved 2018-03-27.
  13. ^ "Origins: Birth of the pH Meter". Caltech Engineering & Science Magazine. Archived from the original on 6 November 2018. Retrieved 11 March 2018.
  14. ^ Tetrault, Sharon (June 2002). "The Beckmans". Orange Coast. Orange Coast Magazine. Archived from the original on 15 April 2021. Retrieved 11 March 2018.
  15. ^ a b Covington, A. K.; Bates, R. G.; Durst, R. A. (1985). "Definitions of pH scales, standard reference values, measurement of pH, and related terminology" (PDF). Pure Appl. Chem. 57 (3): 531–542. doi:10.1351/pac198557030531. S2CID 14182410. Archived (PDF) from the original on 24 September 2007.
  16. ^ Quantities and units – Part 8: Physical chemistry and molecular physics, Annex C (normative): pH. International Organization for Standardization, 1992.
  17. ^ Covington, A. K.; Bates, R. G.; Durst, R. A. (1985). "Definitions of pH scales, standard reference values, measurement of pH, and related terminology" (PDF). Pure Appl. Chem. 57 (3): 531–542. doi:10.1351/pac198557030531. S2CID 14182410. Archived (PDF) from the original on 24 September 2007.
  18. ^ Gold, Victor, ed. (2019). The IUPAC Compendium of Chemical Terminology: The Gold Book (4 ed.). Research Triangle Park, NC: International Union of Pure and Applied Chemistry (IUPAC). doi:10.1351/goldbook.p04525.
  19. ^ "Carlsberg Group Company History Page". Carlsberggroup.com. Archived from the original on 18 January 2014. Retrieved 7 May 2013.
  20. ^ Rossotti, F.J.C.; Rossotti, H. (1965). "Potentiometric titrations solution containing the background electrolyte". J. Chem. Educ. 42. doi:10.1021/ed042p375.
  21. ^ Mendham, J.; Denney, R. C.; Barnes, J. D.; Thomas, M. J. K. (2000), Vogel's Quantitative Chemical Analysis (6th ed.), New York: Prentice Hall, ISBN 0-582-22628-7, Section 13.23, "Determination of pH"
  22. ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "activity (relative activity), a". doi:10.1351/goldbook.A00115
  23. ^ International Union of Pure and Applied Chemistry (1993). Quantities, Units and Symbols in Physical Chemistry, 2nd edition, Oxford: Blackwell Science. ISBN 0-632-03583-8. pp. 49–50. Electronic version.
  24. ^ Himmel, Daniel; Goll, Sascha K.; Leito, Ivo; Krossing, Ingo (2010-08-16). "A Unified pH Scale for All Phases". Angewandte Chemie International Edition. 49 (38): 6885–6888. doi:10.1002/anie.201000252. ISSN 1433-7851. PMID 20715223.
  25. ^ Feldman, Isaac (1956). "Use and Abuse of pH measurements". Analytical Chemistry. 28 (12): 1859–1866. doi:10.1021/ac60120a014.
  26. ^ Mendham, J.; Denney, R. C.; Barnes, J. D.; Thomas, M. J. K. (2000), Vogel's Quantitative Chemical Analysis (6th ed.), New York: Prentice Hall, ISBN 0-582-22628-7, Section 13.19 The glass electrode
  27. ^ Nordstrom, D. Kirk; Alpers, Charles N. (March 1999). "Negative pH, efflorescent mineralogy, and consequences for environmental restoration at the Iron Mountain Superfund site, California". Proceedings of the National Academy of Sciences of the United States of America. 96 (7): 3455–62. Bibcode:1999PNAS...96.3455N. doi:10.1073/pnas.96.7.3455. PMC 34288. PMID 10097057. Archived from the original on 23 September 2017. Retrieved 4 November 2018.
  28. ^ Soil Survey Division Staff. "Soil survey manual.1993. Chapter 3, selected chemical properties". Soil Conservation Service. U.S. Department of Agriculture Handbook 18. Archived from the original on 14 May 2011. Retrieved 2011-03-12.
  29. ^ Ballabio, Cristiano; Lugato, Emanuele; Fernández-Ugalde, Oihane; Orgiazzi, Alberto; Jones, Arwyn; Borrelli, Pasquale; Montanarella, Luca; Panagos, Panos (2019). "Mapping LUCAS topsoil chemical properties at European scale using Gaussian process regression". Geoderma. 355: 113912. Bibcode:2019Geode.355k3912B. doi:10.1016/j.geoderma.2019.113912. PMC 6743211. PMID 31798185.
  30. ^ a b McBride, Murray (1994). Environmental chemistry of soils. New York: Oxford University Press. pp. 169–174. ISBN 0-19-507011-9.
  31. ^ Essington, Michael E. (2004). Soil and Water Chemistry. Boca Raton, Florida: CRC Press. pp. 474–482. ISBN 0-8493-1258-2.
  32. ^ Chester, Jickells, Roy, Tim (2012). Marine Geochemistry. Blackwell Publishing. ISBN 978-1-118-34907-6.{{cite book}}: CS1 maint: multiple names: authors list (link)
  33. ^ Royal Society (2005). Ocean acidification due to increasing atmospheric carbon dioxide (PDF). ISBN 978-0-85403-617-2. Archived (PDF) from the original on 16 July 2010.
  34. ^ a b Zeebe, R. E. and Wolf-Gladrow, D. (2001) CO2 in seawater: equilibrium, kinetics, isotopes, Elsevier Science B.V., Amsterdam, Netherlands ISBN 0-444-50946-1
  35. ^ Hansson, I. (1973). "A new set of pH-scales and standard buffers for seawater". Deep-Sea Research. 20 (5): 479–491. Bibcode:1973DSRA...20..479H. doi:10.1016/0011-7471(73)90101-0.
  36. ^ Dickson, A. G. (1984). "pH scales and proton-transfer reactions in saline media such as sea water". Geochim. Cosmochim. Acta. 48 (11): 2299–2308. Bibcode:1984GeCoA..48.2299D. doi:10.1016/0016-7037(84)90225-4.
  37. ^ Boron, Walter, F.; Boulpaep, Emile L. (13 January 2012). Medical Physiology: A Cellular And Molecular Approach (2nd ed.). Elsevier Health Sciences, Saunders. pp. 652–671. ISBN 9781455711819. OCLC 1017876653. Archived from the original on 8 May 2022. Retrieved 8 May 2022.{{cite book}}: CS1 maint: multiple names: authors list (link)
  38. ^ Marieb, Elaine N.; Mitchell, Susan J. (30 June 2011). Human anatomy & physiology. San Francisco: Benjamin Cummings. ISBN 9780321735287. Archived from the original on 8 May 2022. Retrieved 8 May 2022.
  39. ^ a b Boron, Walter, F.; Boulpaep, Emile L. (13 January 2012). Medical Physiology: A Cellular And Molecular Approach (2nd ed.). Elsevier Health Sciences, Saunders. pp. 652–671. ISBN 9781455711819. OCLC 1017876653. Archived from the original on 8 May 2022. Retrieved 8 May 2022.{{cite book}}: CS1 maint: multiple names: authors list (link)
  40. ^ Lambers, H.; Piessens, S.; Bloem, A.; Pronk, H.; Finkel, P. (2006-10-01). "Natural skin surface pH is on average below 5, which is beneficial for its resident flora". International Journal of Cosmetic Science. 28 (5): 359–370. doi:10.1111/j.1467-2494.2006.00344.x. ISSN 1468-2494. PMID 18489300. S2CID 25191984. Archived from the original on 21 March 2022. Retrieved 8 May 2022.
  41. ^ Maloney, Chris. "pH calculation of a very small concentration of a strong acid". Archived from the original on 8 July 2011. Retrieved 13 March 2011.
  42. ^ Billo, E.J. (2011). EXCEL for Chemists (3rd ed.). Wiley-VCH. ISBN 978-0-470-38123-6.