Jump to content

User:Mlewis000/Network topology draft

From Wikipedia, the free encyclopedia
Diagram of different network layouts

Network Topology is the study of the arrangement or mapping of the elements (links, nodes, etc.) of a network, especially the physical and logical interconnections between nodes[1][2]

A local area network (LAN) is one example of a network that exhibits both a physical and a logical topology. Any given node in the LAN will have one or more links to one or more other nodes in the network and the mapping of these links and nodes onto a graph results in a geometrical shape. The simplest connection is a one-way half duplex link between two nodes. A second return link can be added for two-way full duplex communication. Modern communications cables usually include more than one wire in order to facilitate this, although very simple bus-based networks implement two-way communications on a single wire.

Any particular network topology is determined only by the graphical mapping of the configuration of physical and/or logical connections between nodes - Network Topology is, therefore, technically a part of graph theory. Distances between nodes, physical interconnections, transmission rates, and/or signal types are not a matter of network topology, although they may be affected by it in an actual physical network or may also play some part in determining the topology of a particular network.

Basic Types of Topologies

[edit]

The arrangement or mapping of the elements of a network gives rise to certain basic topologies which may then be combined to form more complex topologies (hybrid topologies). The most common of these basic types of topologies are (refer to the illustration at the top right of this page):

Bus (Linear, Linear Bus)
Star
Ring
Mesh
partially connected mesh (or simply 'mesh')
fully connected mesh (or simply fully connected)
Tree

Classification of Network Topologies

[edit]

There are also three basic categories of network topologies:

physical topologies
signal topologies
logical topologies

The terms signal topology and logical topology are often used interchangeably even though there is a subtle difference between the two and the distinction is not often made between the two.

Physical Topologies

[edit]

The mapping of the nodes of a network and the physical connections between them – i.e., the layout of wiring, cables, the locations of nodes, and the interconnections between the nodes and the cabling or wiring system[1][2].

Classification of Physical Topologies:

[edit]
Bus:
[edit]
Linear Bus:
The type of network topology in which all of the nodes of the network are connected to a common transmission medium which has exactly two endpoints (this is the 'bus', which is also commonly referred to as the backbone, or trunk) – all data that is transmitted between nodes in the network is transmitted over this common transmission medium and is able to be received by all nodes in the network virtually simultaneously (disregarding propagation delays)[1][2].
Note: The two endpoints of the common transmission medium are normally terminated with a device called a terminator that exhibits the characteristic impedance of the transmission medium and which dissipates or absorbs the energy that remains in the signal to prevent the signal from being reflected or propagated back onto the transmission medium in the opposite direction, which would cause interference with and degradation of the signals on the transmission medium (See Electrical_termination.
Distributed Bus:
The type of network topology in which all of the nodes of the network are connected to a common transmission medium which has more than two endpoints that are created by adding branches to the main section of the transmission medium – the physical distributed bus topology functions in exactly the same fashion as the physical linear bus topology (i.e., all nodes share a common transmission medium).
Notes:
1.) All of the endpoints of the common transmission medium are normally terminated with a device called a 'terminator' that exhibits the characteristic impedance of the transmission medium and which dissipates or absorbs the energy that remains in the signal to prevent the signal from being reflected or propagated back onto the transmission medium in the opposite direction, which would cause interference with and degradation of the signals on the transmission medium.
2.) The physical linear bus topology is sometimes considered to be a special case of the physical distributed bus topology – i.e., a distributed bus with no branching segments.
3.) The physical distributed bus topology is sometimes incorrectly referred to as a physical tree topology – however, although the physical distributed bus topology resembles the physical tree topology, it differs from the physical tree topology in that there is no central node to which any other nodes are connected, since this hierarchical functionality is replaced by the common bus.
Star:
[edit]
The type of network topology in which each of the nodes of the network is connected to a central node with a point-to-point link in a 'hub' and 'spoke' fashion, the central node being the 'hub' and the nodes that are attached to the central node being the 'spokes' (e.g., a collection of point-to-point links from the peripheral nodes that converge at a central node) – all data that is transmitted between nodes in the network is transmitted to this central node, which is usually some type of device that then retransmits the data to some or all of the other nodes in the network, although the central node may also be a simple common connection point (such as a 'punch-down' block) without any active device to repeat the signals[1][2].
Notes:
1.) A point-to-point link is sometimes categorized as a special instance of the physical star topology – therefore, the simplest type of network that is based upon the physical star topology would consist of one node with a single point-to-point link to a second node, the choice of which node is the 'hub' and which node is the 'spoke' being arbitrary[1].
2.) After the special case of the point-to-point link, as in note 1.) above, the next simplest type of network that is based upon the physical star topology would consist of one central node – the 'hub' – with two separate point-to-point links to two peripheral nodes – the 'spokes'.
3.) Although most networks that are based upon the physical star topology are commonly implemented using a special device such as a hub or switch as the central node (i.e., the 'hub' of the star), it is also possible to implement a network that is based upon the physical star topology using a computer or even a simple common connection point as the 'hub' or central node – however, since many illustrations of the physical star network topology depict the central node as one of these special devices, some confusion is possible, since this practice may lead to the misconception that a physical star network requires the central node to be one of these special devices, which is not true because a simple network consisting of three computers connected as in note 2.) above also has the topology of the physical star[2].
Extended Star:
A type of network topology in which a network that is based upon the physical star topology has one or more repeaters between the central node (the 'hub' of the star) and the peripheral or 'spoke' nodes, the repeaters being used to extend the maximum transmission distance of the point-to-point links between the central node and the peripheral nodes beyond that which is supported by the transmitter power of the central node or beyond that which is supported by the standard upon which the physical layer of the physical star network is based[2].
Note: If the repeaters in a network that is based upon the physical extended star topology are replaced with hubs or switches, then a hybrid network topology is created that is referred to as a physical hierarchical star topology, although some texts make no distinction between the two topologies[2].
Distributed Star:
A type of network topology that is composed of individual networks that are based upon the physical star topology connected together in a linear fashion – i.e., 'daisy-chained' – with no central or top level connection point (e.g., two or more 'stacked' hubs, along with their associated star connected nodes or 'spokes')[2].
Ring:
[edit]
The type of network topology in which each of the nodes of the network is connected to two other nodes in the network and with the first and last nodes being connected to each other, forming a ring – all data that is transmitted between nodes in the network travels from one node to the next node in a circular manner and the data generally flows in a single direction only[2].
Dual-ring:
The type of network topology in which each of the nodes of the network is connected to two other nodes in the network, with two connections to each of these nodes, and with the first and last nodes being connected to each other with two connections, forming a double ring – the data flows in opposite directions around the two rings, although, generally, only one of the rings carries data during normal operation, and the two rings are independent unless there is a failure or break in one of the rings, at which time the two rings are joined (by the stations on either side of the fault) to enable the flow of data to continue using a segment of the second ring to bypass the fault in the primary ring[2].
Mesh:
[edit]
Full:
Fully Connected:
The type of network topology in which each of the nodes of the network is connected to each of the other nodes in the network with a point-to-point link – this makes it possible for data to be simultaneously transmitted from any single node to all of the other nodes[2].
Note: The physical fully connected mesh topology is generally too costly and complex for practical networks, although the topology is used when there are only a small number of nodes to be interconnected[2].
Formula: In a fully connected network consisting of n nodes, there are a total of p = n(n-1)/2 direct paths or branches, where p is the total number of paths or branches in the network[2].
Partial:
Partially Connected:
The type of network topology in which some of the nodes of the network are connected to more than one other node in the network with a point-to-point link – this makes it possible to take advantage of some of the redundancy that is provided by a physical fully connected mesh topology without the expense and complexity required for a connection between every node in the network[2].
Note: In most practical networks that are based upon the physical partially connected mesh topology, all of the data that is transmitted between nodes in the network takes the shortest path between nodes, except in the case of a failure or break in one of the links, in which case the data takes an alternate path to the destination – this implies that the nodes of the network possess some type of logical 'routing' algorithm to determine the correct path to use at any particular time[2].
Tree (also known as Hierarchical):
[edit]
The type of network topology in which a central 'root' node (the top level of the hierarchy) is connected to one or more other nodes that are one level lower in the hierarchy (i.e., the second level) with a point-to-point link between each of the second level nodes and the top level central 'root' node, while each of the second level nodes that are connected to the top level central 'root' node will also have one or more other nodes that are one level lower in the hierarchy (i.e., the third level) connected to it, also with a point-to-point link, the top level central 'root' node being the only node that has no other node above it in the hierarchy – the hierarchy of the tree is symmetrical, each node in the network having a specific fixed number, f, of nodes connected to it at the next lower level in the hierarchy, the number, f, being referred to as the 'branching factor' of the hierarchical tree[2].
Notes:
1.) A network that is based upon the physical hierarchical topology must have at least three levels in the hierarchy of the tree, since a network with a central 'root' node and only one hierarchical level below it would exhibit the physical topology of a star[2].
2.) A network that is based upon the physical hierarchical topology and with a branching factor of 1 would be classified as a physical linear topology[2].
3.) The branching factor, f, is independent of the total number of nodes in the network and, therefore, if the nodes in the network require ports for connection to other nodes the total number of ports per node may be kept low even though the total number of nodes is large – this makes the effect of the cost of adding ports to each node totally dependent upon the branching factor and may therefore be kept as low as required without any effect upon the total number of nodes that are possible[2].
4.) The total number of point-to-point links in a network that is based upon the physical hierarchical topology will be one less that the total number of nodes in the network[2].
5.) If the nodes in a network that is based upon the physical hierarchical topology are required to perform any processing upon the data that is transmitted between nodes in the network, the nodes that are at higher levels in the hierarchy will be required to perform more processing operations on behalf of other nodes than the nodes that are lower in the hierarchy[2].

Hybrid Network Topologies

[edit]

The hybrid topology is a type of network topology that is composed of one or more interconnections of two or more networks that are based upon different physical topologies or a type of network topology that is composed of one or more interconnections of two or more networks that are based upon the same physical topology, but where the physical topology of the network resulting from such an interconnection does not meet the definition of the original physical topology of the interconnected networks (e.g., the physical topology of a network that would result from an interconnection of two or more networks that are based upon the physical star topology might create a hybrid topology which resembles a mixture of the physical star and physical bus topologies or a mixture of the physical star and the physical tree topologies, depending upon how the individual networks are interconnected, while the physical topology of a network that would result from an interconnection of two or more networks that are based upon the physical distributed bus network retains the topology of a physical distributed bus network)[2].

Star-Bus:
A type of network topology in which the central nodes of one or more individual networks that are based upon the physical star topology are connected together using a common 'bus' network whose physical topology is based upon the physical linear bus topology, the endpoints of the common 'bus' being terminated with the characteristic impedance of the transmission medium where required – e.g., two or more hubs connected to a common backbone with drop cables through the port on the hub that is provided for that purpose (e.g., a properly configured 'uplink' port) would comprise the physical bus portion of the physical star-bus topology, while each of the individual hubs, combined with the individual nodes which are connected to them, would comprise the physical star portion of the physical star-bus topology[2].
Star-of_Stars:
Hierarchical Star:
A type of network topology that is composed of an interconnection of individual networks that are based upon the physical star topology connected together in a hierarchical fashion to form a more complex network – e.g., a top level central node which is the 'hub' of the top level physical star topology and to which other second level central nodes are attached as the 'spoke' nodes, each of which, in turn, may also become the central nodes of a third level physical star topology[2].
Notes:
1.) The physical hierarchical star topology is not a combination of the physical linear bus and the physical star topologies, as cited in some texts, as there is no common linear bus within the topology, although the top level 'hub' which is the beginning of the physical hierarchical star topology may be connected to the backbone of another network, such as a common carrier, which is, topologically, not considered to be a part of the local network – if the top level central node is connected to a backbone that is considered to be a part of the local network, then the resulting network topology would be considered to be a hybrid topology that is a mixture of the topology of the backbone network and the physical hierarchical star topology[2].
2.) The physical hierarchical star topology is also sometimes incorrectly referred to as a physical tree topology, since its physical topology is hierarchical, however, the physical hierarchical star topology does not have a structure that is determined by a branching factor, as is the case with the physical tree topology and, therefore, nodes may be added to, or removed from, any node that is the 'hub' of one of the individual physical star topology networks within a network that is based upon the physical hierarchical star topology[2].
3.) The physical hierarchical star topology is commonly used in 'outside plant' (OSP) cabling to connect various buildings to a central connection facility, which may also house the 'demarcation point' for the connection to the data transmission facilities of a common carrier, and in 'inside plant' (ISP) cabling to connect multiple wiring closets within a building to a common wiring closet within the same building, which is also generally where the main backbone or trunk that connects to a larger network, if any, enters the building[2].
Star-wired Ring:
A type of hybrid physical network topology that is a combination of the physical star topology and the physical ring topology, the physical star portion of the topology consisting of a network in which each of the nodes of which the network is composed are connected to a central node with a point-to-point link in a 'hub' and 'spoke' fashion, the central node being the 'hub' and the nodes that are attached to the central node being the 'spokes' (e.g., a collection of point-to-point links from the peripheral nodes that converge at a central node) in a fashion that is identical to the physical star topology, while the physical ring portion of the topology consists of circuitry within the central node which routes the signals on the network to each of the connected nodes sequentially, in a circular fashion[2].
Note: In an 802.5 Token Ring network the central node is called a Multistation Access Unit (MAU)[2].
Hybrid Mesh:
A type of hybrid physical network topology that is a combination of the physical partially connected topology and one or more other physical topologies the mesh portion of the topology consisting of redundant or alternate connections between some of the nodes in the network – the physical hybrid mesh topology is commonly used in networks which require a high degree of availability[2].

Signal Topology

[edit]

The mapping of the actual connections between the nodes of a network, as evidenced by the path that the signals take when propagating between the nodes[2].

Note: The term 'signal topology' is often used synonymously with the term 'logical topology', however, some confusion may result from this practice in certain situations since, by definition, the term 'logical topology' refers to the apparent path that the data takes between nodes in a network while the term 'signal topology' generally refers to the actual path that the signals (e.g., optical, electrical, electromagnetic, etc.) take when propagating between nodes[2].
Example:
In an 802.4 Token Bus network, the physical topology may be a physical bus, a physical star, or a hybrid physical topology, while the signal topology is a bus (i.e., the electrical signal propagates to all nodes simultaneously [ignoring propagation delays and network latency] ), and the logical topology is a ring (i.e., the data flows from one node to the next in a circular manner according to a protocol)[2].

Logical Topology

[edit]

The mapping of the apparent connections between the nodes of a network, as evidenced by the path that data appears to take when traveling between the nodes[2].

Classification of Logical Topologies

[edit]

The logical classification of network topologies generally follows the same classifications as those in the physical classifications of network topologies, the path that the data takes between nodes being used to determine the topology as opposed to the actual physical connections being used to determine the topology.

Notes:
1.) Logical topologies are often closely associated with media access control (MAC) methods and protocols.
2.) The logical topologies are generally determined by network protocols as opposed to being determined by the physical layout of cables, wires, and network devices or by the flow of the electrical signals, although in many cases the paths that the electrical signals take between nodes may closely match the logical flow of data, hence the convention of using the terms 'logical topology' and 'signal topology' interchangeably.
3.) Logical topologies are able to be dynamically reconfigured by special types of equipment such as routers and switches.

References

[edit]
  1. ^ a b c d e Groth, David (2005). 'Network+ Study Guide, Fourth Edition'. Sybex, Inc. ISBN 0-7821-4406-3. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
  2. ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah Google.com, Numerous university professor's notes. (2005). {{cite book}}: |last= has generic name (help); Missing or empty |title= (help)