Jump to content

User:Jacobolus/Sandbox/flag

From Wikipedia, the free encyclopedia

sandbox version:

Design

[edit]

Specifications

[edit]

Diagram of the flag's design

The basic design of the current flag is specified by 4 U.S.C. § 1 (1947): “The flag of the United States shall be thirteen horizontal stripes, alternate red and white; and the union of the flag shall be forty-eight stars, white in a blue field.” 4 U.S.C. § 2 outlines the addition of new stars to represent new states, with no distinction made for the shape, size, or arrangement of the stars. Executive Order 10834 (1959) specifies a 50-star design for use after Hawaii was added as a state, and Federal Specification DDD-F-416F (2005) provides additional details about the production of physical flags for use by federal agencies.[1]

  • Hoist (height) of the flag: A = 1.0
  • Fly (width) of the flag: B = 1.9[2]
  • Hoist (height) of the canton ("union"): C = 0.5385 (A × 7/13, spanning seven stripes)
  • Fly (width) of the canton: D = 0.76 (B × 2/5, two-fifths of the flag width)
  • E = F = 0.0538 (C/10, one-tenth of the height of the canton)
  • G = H = 0.0633 (D/12, one twelfth of the width of the canton)
  • Diameter of star: K = 0.0616 (L × 4/5, four-fifths of the stripe width, the calculation only gives 0.0616 if L is first rounded to 0.077)
  • Width of stripe: L = 0.0769 (A/13, one thirteenth of the flag height)

Strictly speaking, the executive order establishing these specifications governs only flags made for or by the federal government.[3] In practice, most U.S. national flags available for sale to the public follow the federal star arrangement, but have a different width-to-height ratio; common sizes are 2 × 3 ft. or 4 × 6 ft. (flag ratio 1.5), 2.5 × 4 ft. or 5 × 8 ft. (1.6), or 3 × 5 ft. or 6 × 10 ft. (1.667). Even flags flown over the U.S. Capitol for sale to the public through Representatives or Senators are provided in these sizes.[4] Flags that are made to the prescribed 1.9 ratio are often referred to as "G-spec" (for "government specification") flags.

Colors

[edit]

Federal Standard DDD-F-416F specifies the exact red, white, and blue colors to be used for physical flags procured by federal agencies with reference to the Standard Color Reference of America, 10th edition, a set of dyed silk fabric samples produced by the The Color Association of the United States. The colors are "White", No. 70001; "Old Glory Red", No. 70180; and "Old Glory Blue", No. 70075.

CIE coordinates for the colors of the 9th edition of the Standard Color Reference were carefully measured and cross-checked by color scientists from the National Bureau of Standards in 1946, with the resulting coordinates adopted as a formal specification.[5] These colors form the standard for cloth, and there is no perfect way to convert them to RGB for display on screen or CMYK for printing. The "relative" coordinates in the following table were found by scaling the luminous reflectance relative to the flag's white.

Federal Standard DDD-F-416F cloth color specifications[6]
Name Absolute Relative
CIELAB D65 Munsell sRGB GRACoL 2006
L* a* b* H V/C R G B 8-bit hex C M Y K
White 88.7 −0.2 5.4 2.5Y 8.8/0.7 1.000 1.000 1.000 #FFFFFF .000 .000 .000 .000
Old Glory Red 33.9 51.2 24.7 5.5R 3.3/11.1 .698 .132 .203 #B22234 .196 1.000 .757 .118
Old Glory Blue 23.2 13.1 −26.4 8.2PB 2.3/6.1 .234 .233 .430 #3C3B6E .886 .851 .243 .122

As with the design, the official colors are only officially required for flags produced for the U.S. federal government, and other colors are often used for mass-market flags, printed reproductions, and other products intended to evoke flag colors. The practice of using more saturated colors than the official cloth is not new. As Taylor, Knoche, and Granville wrote in 1950: "The color of the official wool bunting [of the blue field] is a very dark blue, but printed reproductions of the flag, as well as merchandise supposed to match the flag, present the color as a deep blue much brighter than the official wool."[7]

Sometimes, Pantone Matching System (PMS) alternatives to the dyed fabric colors are recommended by US government agencies for use in websites or printed documents. One set was given on the website of the U.S. embassy in London as early as 1996; the website of the U.S. embassy in Stockholm claimed in 2001 that those had been suggested by Pantone, and that the U.S. Government Printing Office preferred a different set. A third red was suggested by a California Military Department document in 2002.[8] In 2001, the Texas legislature specified that the colors of the Texas flag should be "(1) the same colors used in the United States flag; and (2) defined as numbers 193 (red) and 281 (dark blue) of the Pantone Matching System."[9] The current internal style guide of the State Department Bureau of Educational and Cultural Affairs specifies PMS 282C blue and PMS 193C red, and gives RGB and CMYK conversions generated by Adobe InDesign.[10]

Bureau of Educational and Cultural Affairs style guidelines[10]
Pantone Identifier RGB CMYK
R G B 8-bit hex C M Y K
White 1.00 1.00 1.00 #FFFFFF 0.00 0.00 0.00 0.00
PMS 193C 0.72 0.10 0.26 #B31942 0 1.00 0.66 0.13
PMS 282C 0.04 0.19 0.38 #0A3161 1.00 0.68 0.00 0.54


current version:

Design

[edit]

Specifications

[edit]

Diagram of the flag's design

The basic design of the current flag is specified by 4 U.S.C. § 1; 4 U.S.C. § 2 outlines the addition of new stars to represent new states, with no distinction made for the shape, size, or arrangement of the stars. Specifications for federal government use adhere to the following values:[10]

  • Hoist (height) of the flag: A = 1.0
  • Fly (width) of the flag: B = 1.9[11]
  • Hoist (height) of the canton ("union"): C = 0.5385 (A × 7/13, spanning seven stripes)
  • Fly (width) of the canton: D = 0.76 (B × 2/5, two-fifths of the flag width)
  • E = F = 0.0538 (C/10, one-tenth of the height of the canton)
  • G = H = 0.0633 (D/12, one twelfth of the width of the canton)
  • Diameter of star: K = 0.0616 (L × 4/5, four-fifths of the stripe width, the calculation only gives 0.0616 if L is first rounded to 0.077)
  • Width of stripe: L = 0.0769 (A/13, one thirteenth of the flag height)

These specifications are contained in an executive order which, strictly speaking, governs only flags made for or by the U.S. federal government.[12] In practice, most U.S. national flags available for sale to the public follow the federal star arrangement, but have a different width-to-height ratio; common sizes are 2 × 3 ft. or 4 × 6 ft. (flag ratio 1.5), 2.5 × 4 ft. or 5 × 8 ft. (1.6), or 3 × 5 ft. or 6 × 10 ft. (1.667). Even flags flown over the U.S. Capitol for sale to the public through Representatives or Senators are provided in these sizes.[13] Flags that are made to the prescribed 1.9 ratio are often referred to as "G-spec" (for "government specification") flags.

Colors

[edit]

The colors of the flag are "Old Glory Red", "White", and "Old Glory Blue".

RGB, CMYK, and Pantone color specifications for the flag are provided by the Department of State in a design guide created by the Bureau of Educational and Cultural Affairs.[10] Cable colors are specified with reference to the CAUS Standard Color Reference of America, 10th edition, a set of reference color samples made of dyed silk fabric.[14]

Color Name RGB CMYK PMS Cable
Hex[15] R G B C M Y K
Old Glory Red #B31942 179 25 66 0 100 66 13 193 C 70180
White #FFFFFF 255 255 255 0 0 0 0 Safe 70001
Old Glory Blue #0A3161 10 49 97 100 68 0 54 282 C 70075

Cable colors in CIE

[edit]

The CIE coordinates for the colors of the 9th edition of the Standard Color Card were carefully measured and cross-checked by color scientists from the National Bureau of Standards in 1946, with the resulting coordinates adopted as a formal specification.[16] These colors form the standard for cloth, and there is no perfect way to convert them to RGB for display on screen or CMYK for printing. The "relative" coordinates in the following table were found by scaling the luminous reflectance relative to the flag's white.

Institute of heraldry cloth color specifications[17]
Name Absolute Relative
CIELAB D65 Munsell CIELAB D50 sRGB GRACoL 2006
L* a* b* H V/C L* a* b* R G B 8-bit hex C M Y K
White 88.7 −0.2 5.4 2.5Y 8.8/0.7 100.0 0.0 0.0 1.000 1.000 1.000 #FFFFFF .000 .000 .000 .000
Old Glory Red 33.9 51.2 24.7 5.5R 3.3/11.1 39.9 57.3 28.7 .698 .132 .203 #B22234 .196 1.000 .757 .118
Old Glory Blue 23.2 13.1 −26.4 8.2PB 2.3/6.1 26.9 11.5 −30.3 .234 .233 .430 #3C3B6E .886 .851 .243 .122

Reproductions

[edit]

As with the design, the official colors are only officially required for flags produced for the U.S. federal government, and other colors are often used for mass-market flags, printed reproductions, and other products intended to evoke flag colors. The practice of using more saturated colors than the official cloth is not new. As Taylor, Knoche, and Granville wrote in 1950: "The color of the official wool bunting [of the blue field] is a very dark blue, but printed reproductions of the flag, as well as merchandise supposed to match the flag, present the color as a deep blue much brighter than the official wool."[18]


previous version:

Design

[edit]

Specifications

[edit]

Diagram of the flag's design

The basic design of the current flag is specified by 4 U.S.C. § 1; 4 U.S.C. § 2 outlines the addition of new stars to represent new states, with no distinction made for the shape, size, or arrangement of the stars. Specifications for federal government use adhere to the following values:[10]

  • Hoist (height) of the flag: A = 1.0
  • Fly (width) of the flag: B = 1.9[19]
  • Hoist (height) of the canton ("union"): C = 0.5385 (A × 7/13, spanning seven stripes)
  • Fly (width) of the canton: D = 0.76 (B × 2/5, two-fifths of the flag width)
  • E = F = 0.0538 (C/10, one-tenth of the height of the canton)
  • G = H = 0.0633 (D/12, one twelfth of the width of the canton)
  • Diameter of star: K = 0.0616 (L × 4/5, four-fifths of the stripe width, the calculation only gives 0.0616 if L is first rounded to 0.077)
  • Width of stripe: L = 0.0769 (A/13, one thirteenth of the flag height)

These specifications are contained in an executive order which, strictly speaking, governs only flags made for or by the U.S. federal government.[20] In practice, most U.S. national flags available for sale to the public follow the federal star arrangement, but have a different width-to-height ratio; common sizes are 2 × 3 ft. or 4 × 6 ft. (flag ratio 1.5), 2.5 × 4 ft. or 5 × 8 ft. (1.6), or 3 × 5 ft. or 6 × 10 ft. (1.667). Even flags flown over the U.S. Capitol for sale to the public through Representatives or Senators are provided in these sizes.[21] Flags that are made to the prescribed 1.9 ratio are often referred to as "G-spec" (for "government specification") flags.

Colors

[edit]

The exact red, white, and blue colors to be used in the flag are specified with reference to the CAUS Standard Color Reference of America, 10th edition. Specifically, the colors are "White", "Old Glory Red", and "Old Glory Blue".[22] The CIE coordinates for the colors of the 9th edition of the Standard Color Card were formally specified in JOSA in 1946.[23] These colors form the standard for cloth, and there is no perfect way to convert them to RGB for display on screen or CMYK for printing. The "relative" coordinates in the following table were found by scaling the luminous reflectance relative to the flag's white.

Institute of heraldry cloth color specifications[24]
Name Absolute Relative
CIELAB D65 Munsell CIELAB D50 sRGB GRACoL 2006
L* a* b* H V/C L* a* b* R G B 8-bit hex C M Y K
White 88.7 −0.2 5.4 2.5Y 8.8/0.7 100.0 0.0 0.0 1.000 1.000 1.000 #FFFFFF .000 .000 .000 .000
Old Glory Red 33.9 51.2 24.7 5.5R 3.3/11.1 39.9 57.3 28.7 .698 .132 .203 #B22234 .196 1.000 .757 .118
Old Glory Blue 23.2 13.1 −26.4 8.2PB 2.3/6.1 26.9 11.5 −30.3 .234 .233 .430 #3C3B6E .886 .851 .243 .122

As with the design, the official colors are only officially required for flags produced for the U.S. federal government, and other colors are often used for mass-market flags, printed reproductions, and other products intended to evoke flag colors. The practice of using more saturated colors than the official cloth is not new. As Taylor, Knoche, and Granville wrote in 1950: "The color of the official wool bunting [of the blue field] is a very dark blue, but printed reproductions of the flag, as well as merchandise supposed to match the flag, present the color as a deep blue much brighter than the official wool."[25]

Sometimes, Pantone Matching System (PMS) approximations to the flag colors are used. One set was given on the website of the U.S. embassy in London as early as 1998; the website of the U.S. embassy in Stockholm claimed in 2001 that those had been suggested by Pantone, and that the U.S. Government Printing Office preferred a different set. A third red was suggested by a California Military Department document in 2002.[26] In 2001, the Texas legislature specified that the colors of the Texas flag should be "(1) the same colors used in the United States flag; and (2) defined as numbers 193 (red) and 281 (dark blue) of the Pantone Matching System."[27] The 2012 Identity and Marking Standards published by the Department of State specify PMS 282C blue and PMS 193C red, along with the corresponding RGB and CMYK values from Adobe InDesign 6.[10]

State Department standard colors[10]
Name PMS RGB CMYK
R G B 8-bit hex C M Y K
White 255 255 255 #FFFFFF 0 0 0 0
Old Glory Red 193 C 179 25 66 #B31942 0 100 66 13
Old Glory Blue 282 C 10 49 97 #0A3161 100 68 0 54

Slightly less old version

Colors

[edit]

The exact red, white, and blue colors to be used in the flag are specified with reference to the CAUS Standard Color Reference of America, 10th edition, a set of reference color samples made of dyed silk fabric. Specifically, the colors are "White", "Old Glory Red", and "Old Glory Blue".[28] The CIE coordinates for the colors of the 9th edition of the Standard Color Card were carefully measured and cross-checked by color scientists from the National Bureau of Standards in 1946, with the resulting coordinates adopted as a formal specification.[29] These colors form the standard for cloth, and there is no perfect way to convert them to RGB for display on screen or CMYK for printing. The "relative" coordinates in the following table were found by scaling the luminous reflectance relative to the flag's white.

Institute of heraldry cloth color specifications[30]
Name Absolute Relative
CIELAB D65 Munsell CIELAB D50 sRGB GRACoL 2006
L* a* b* H V/C L* a* b* R G B 8-bit hex C M Y K
White 88.7 −0.2 5.4 2.5Y 8.8/0.7 100.0 0.0 0.0 1.000 1.000 1.000 #FFFFFF .000 .000 .000 .000
Old Glory Red 33.9 51.2 24.7 5.5R 3.3/11.1 39.9 57.3 28.7 .698 .132 .203 #B22234 .196 1.000 .757 .118
Old Glory Blue 23.2 13.1 −26.4 8.2PB 2.3/6.1 26.9 11.5 −30.3 .234 .233 .430 #3C3B6E .886 .851 .243 .122

As with the design, the official colors are only officially required for flags produced for the U.S. federal government, and other colors are often used for mass-market flags, printed reproductions, and other products intended to evoke flag colors. The practice of using more saturated colors than the official cloth is not new. As Taylor, Knoche, and Granville wrote in 1950: "The color of the official wool bunting [of the blue field] is a very dark blue, but printed reproductions of the flag, as well as merchandise supposed to match the flag, present the color as a deep blue much brighter than the official wool."[31]

Sometimes, Pantone Matching System (PMS) approximations to the flag colors are used. One set was given on the website of the U.S. embassy in London as early as 1998; the website of the U.S. embassy in Stockholm claimed in 2001 that those had been suggested by Pantone, and that the U.S. Government Printing Office preferred a different set. A third red was suggested by a California Military Department document in 2002.[32] In 2001, the Texas legislature specified that the colors of the Texas flag should be "(1) the same colors used in the United States flag; and (2) defined as numbers 193 (red) and 281 (dark blue) of the Pantone Matching System."[33] The 2012 Identity and Marking Standards published by the Department of State specify PMS 282C blue and PMS 193C red, along with the corresponding RGB and CMYK values from Adobe InDesign 6.[10]

State Department standard colors[10]
Name PMS RGB CMYK
R G B 8-bit hex C M Y K
White 255 255 255 #FFFFFF 0 0 0 0
Old Glory Red 193 C 179 25 66 #B31942 0 100 66 13
Old Glory Blue 282 C 10 49 97 #0A3161 100 68 0 54
  1. ^ General Services Administration "Federal Specification DDD-F-416F: Flag, National, United States of America and Flag, Union Jack". March 31, 2005.
  2. ^ Note that the flag ratio (B/A in the diagram) is not absolutely fixed. Although the diagram in Executive Order 10834 gives a ratio of 1.9, earlier in the order is a list of flag sizes authorized for executive agencies. This list permits eleven specific flag sizes (specified by height and width) for such agencies: 20.00 × 38.00; 10.00 × 19.00; 8.95 × 17.00; 7.00 × 11.00; 5.00 × 9.50; 4.33 × 5.50; 3.50 × 6.65; 3.00 × 4.00; 3.00 × 5.70; 2.37 × 4.50; and 1.32 × 2.50. Eight of these sizes conform to the 1.9 ratio, within a small rounding error (less than 0.01). However, three of the authorized sizes vary significantly: 1.57 (for 7.00 × 11.00), 1.27 (for 4.33 × 5.50) and 1.33 (for 3.00 × 4.00).
  3. ^ Ex. Ord. No. 10834, August 21, 1959, 24 F.R. 6865 (governing flags "manufactured or purchased for the use of executive agencies", Section 22). Section 32 explains that, "As used in this order, the term 'executive agencies' means the executive departments and independent establishments in the executive branch of the Government, including wholly owned Government corporations."
  4. ^ Architect of the Capitol: "Flag Request Form", retrieved on July 1st, 2017.
  5. ^ Reimann, Genevieve; Judd, Deane B.; Keegan, Harry J. (1946). "Spectrophotometric and Colorimetric Determination of the Colors of the TCCA Standard Color Cards". Journal of the Optical Society of America. 36 (3): 128–159. doi:10.1364/JOSA.36.000128.
  6. ^ In the 9th edition of the Standard Color Card of America, "White", "Old Glory Red", and "Old Glory Blue" were, respectively, Cable No. 70001, Cable No. 70180, and Cable No. 70075. The Munsell renotation coordinates for these were taken directly from the Reimann et al. paper, the CIELAB D65 coordinates were found by converting the xyY values in that paper to be relative to CIE Illuminant D65 from Illuminant C using the CAT02 chromatic adaptation transform, and relative to a perfect diffuse reflector as white. The "relative" values in the table were found by taking Cable No. 70001's luminosity to be that of the white point and were converted to D65 or D50 also using the CAT02 transformation. The values for CMYK were found by converting from the CIELAB D50 values using the Adobe CMM and the GRACoL 2006 ICC profile in Adobe Photoshop.
  7. ^ Helen Taylor, Lucille Knoche, and Walter Granville, eds. (1950), Descriptive Color Names Dictionary. Container Corporation of America.
  8. ^ In 1996, "U.S. Flag Facts" at the website of the U.S. embassy in London listed the colors red PMS 193 and blue PMS 282 (presumably PMS solid coated colors). By October 2002, these had changed to red PMS 193 and blue PMS 281. These latter PMS equivalents are listed on many websites including various other U.S. Government organizations, such as the Millennium Challenge Corporation's website Archived May 22, 2010, at the Wayback Machine. See also "United States of America" Archived July 13, 2010, at the Wayback Machine, Flags of the World.
    The website of the U.S. Embassy in Stockholm instead lists PMS 186 and PMS 288 as the colors specified by the U.S. Government Printing Office: "Colors of the U.S. Flag". United States Embassy Stockholm. November 2001.
    The Military Department of the State of California suggested PMS 200 for red in a 2002 document, "Flags over California, a history and guide".
  9. ^ The Government Code; Title 11. State Symbols and Honors; Subtitle A; Chapter 3100. Statutes.legis.state.tx.us. Retrieved on May 27, 2011.
  10. ^ a b c d e f g h i "United States Department of State Identity and Marking Standards" (PDF). Bureau of Educational and Cultural Affairs. July 2016. Retrieved 2023-01-21. {{cite web}}: |archive-date= requires |archive-url= (help) Cite error: The named reference "eca flag standards" was defined multiple times with different content (see the help page).
  11. ^ Note that the flag ratio (B/A in the diagram) is not absolutely fixed. Although the diagram in Executive Order 10834 gives a ratio of 1.9, earlier in the order is a list of flag sizes authorized for executive agencies. This list permits eleven specific flag sizes (specified by height and width) for such agencies: 20.00 × 38.00; 10.00 × 19.00; 8.95 × 17.00; 7.00 × 11.00; 5.00 × 9.50; 4.33 × 5.50; 3.50 × 6.65; 3.00 × 4.00; 3.00 × 5.70; 2.37 × 4.50; and 1.32 × 2.50. Eight of these sizes conform to the 1.9 ratio, within a small rounding error (less than 0.01). However, three of the authorized sizes vary significantly: 1.57 (for 7.00 × 11.00), 1.27 (for 4.33 × 5.50) and 1.33 (for 3.00 × 4.00).
  12. ^ Ex. Ord. No. 10834, August 21, 1959, 24 F.R. 6865 (governing flags "manufactured or purchased for the use of executive agencies", Section 22). Section 32 explains that, "As used in this order, the term 'executive agencies' means the executive departments and independent establishments in the executive branch of the Government, including wholly owned Government corporations."
  13. ^ Architect of the Capitol: "Flag Request Form" Archived April 28, 2017, at the Wayback Machine, retrieved on July 1st, 2017.
  14. ^ General Services Administration "Federal Specification DDD-F-416F: Flag, National, United States of America and Flag, Union Jack". March 31, 2005.
  15. ^ 8-bit Hex triplet values are interpreted from RGB values.
  16. ^ Reimann, Genevieve; Judd, Deane B.; Keegan, Harry J. (1946). "Spectrophotometric and Colorimetric Determination of the Colors of the TCCA Standard Color Cards". Journal of the Optical Society of America. 36 (3): 128–159. doi:10.1364/JOSA.36.000128.
  17. ^ In the 9th edition of the Standard Color Card of America, "White", "Old Glory Red", and "Old Glory Blue" were, respectively, Cable No. 70001, Cable No. 70180, and Cable No. 70075. The Munsell renotation coordinates for these were taken directly from the Reimann et al. paper, the CIELAB D65 coordinates were found by converting the xyY values in that paper to be relative to CIE Illuminant D65 from Illuminant C using the CAT02 chromatic adaptation transform, and relative to a perfect diffuse reflector as white. The "relative" values in the table were found by taking Cable No. 70001's luminosity to be that of the white point and were converted to D65 or D50 also using the CAT02 transformation. The values for CMYK were found by converting from the CIELAB D50 values using the Adobe CMM and the GRACoL 2006 ICC profile in Adobe Photoshop.
  18. ^ Helen Taylor, Lucille Knoche, and Walter Granville, eds. (1950), Descriptive Color Names Dictionary. Container Corporation of America.
  19. ^ Note that the flag ratio (B/A in the diagram) is not absolutely fixed. Although the diagram in Executive Order 10834 gives a ratio of 1.9, earlier in the order is a list of flag sizes authorized for executive agencies. This list permits eleven specific flag sizes (specified by height and width) for such agencies: 20.00 × 38.00; 10.00 × 19.00; 8.95 × 17.00; 7.00 × 11.00; 5.00 × 9.50; 4.33 × 5.50; 3.50 × 6.65; 3.00 × 4.00; 3.00 × 5.70; 2.37 × 4.50; and 1.32 × 2.50. Eight of these sizes conform to the 1.9 ratio, within a small rounding error (less than 0.01). However, three of the authorized sizes vary significantly: 1.57 (for 7.00 × 11.00), 1.27 (for 4.33 × 5.50) and 1.33 (for 3.00 × 4.00).
  20. ^ Ex. Ord. No. 10834, August 21, 1959, 24 F.R. 6865 (governing flags "manufactured or purchased for the use of executive agencies", Section 22). Section 32 explains that, "As used in this order, the term 'executive agencies' means the executive departments and independent establishments in the executive branch of the Government, including wholly owned Government corporations."
  21. ^ Architect of the Capitol: "Flag Request Form", retrieved on July 1st, 2017.
  22. ^ General Services Administration "Federal Specification DDD-F-416F: Flag, National, United States of America and Flag, Union Jack". March 31, 2005.
  23. ^ Genevieve Reimann, Deane B. Judd, and Harry J. Keegan (1946). "Spectrophotometric and Colorimetric Determination of the Colors of the TCCA Standard Color Cards". JOSA 36 (3), 128–159.
  24. ^ In the 9th edition of the Standard Color Card of America, "White", "Old Glory Red", and "Old Glory Blue" were, respectively, Cable No. 70001, Cable No. 70180, and Cable No. 70075. The Munsell renotation coordinates for these were taken directly from the Reimann et al. paper, the CIELAB D65 coordinates were found by converting the xyY values in that paper to be relative to CIE Illuminant D65 from Illuminant C using the CAT02 chromatic adaptation transform, and relative to a perfect diffuse reflector as white. The "relative" values in the table were found by taking Cable No. 70001's luminosity to be that of the white point and were converted to D65 or D50 also using the CAT02 transformation. The values for CMYK were found by converting from the CIELAB D50 values using the Adobe CMM and the GRACoL 2006 ICC profile in Adobe Photoshop.
  25. ^ Helen Taylor, Lucille Knoche, and Walter Granville, eds. (1950), Descriptive Color Names Dictionary. Container Corporation of America.
  26. ^ In 1998, "U.S. Flag Facts" at the website of the U.S. embassy in London listed the colors red PMS 193 and blue PMS 282 (presumably PMS solid coated colors). By October 2002, these had changed to red PMS 193 and blue PMS 281. These latter PMS equivalents are listed on many websites including various other U.S. Government organizations, such as the Millennium Challenge Corporation's website Archived May 22, 2010, at the Wayback Machine. See also "United States of America" Archived July 13, 2010, at the Wayback Machine, Flags of the World.
    The website of the U.S. Embassy in Stockholm instead lists PMS 186 and PMS 288 as the colors specified by the U.S. Government Printing Office: "Colors of the U.S. Flag". United States Embassy Stockholm. November 2001.
    The Military Department of the State of California suggested PMS 200 for red in a 2002 document, "Flags over California, a history and guide".
  27. ^ The Government Code; Title 11. State Symbols and Honors; Subtitle A; Chapter 3100. Statutes.legis.state.tx.us. Retrieved on May 27, 2011.
  28. ^ General Services Administration "Federal Specification DDD-F-416F: Flag, National, United States of America and Flag, Union Jack". March 31, 2005.
  29. ^ Reimann, Genevieve; Judd, Deane B.; Keegan, Harry J. (1946). "Spectrophotometric and Colorimetric Determination of the Colors of the TCCA Standard Color Cards". Journal of the Optical Society of America. 36 (3): 128–159. doi:10.1364/JOSA.36.000128.
  30. ^ In the 9th edition of the Standard Color Card of America, "White", "Old Glory Red", and "Old Glory Blue" were, respectively, Cable No. 70001, Cable No. 70180, and Cable No. 70075. The Munsell renotation coordinates for these were taken directly from the Reimann et al. paper, the CIELAB D65 coordinates were found by converting the xyY values in that paper to be relative to CIE Illuminant D65 from Illuminant C using the CAT02 chromatic adaptation transform, and relative to a perfect diffuse reflector as white. The "relative" values in the table were found by taking Cable No. 70001's luminosity to be that of the white point and were converted to D65 or D50 also using the CAT02 transformation. The values for CMYK were found by converting from the CIELAB D50 values using the Adobe CMM and the GRACoL 2006 ICC profile in Adobe Photoshop.
  31. ^ Helen Taylor, Lucille Knoche, and Walter Granville, eds. (1950), Descriptive Color Names Dictionary. Container Corporation of America.
  32. ^ In 1998, "U.S. Flag Facts"at the website of the U.S. embassy in London listed the colors red PMS 193 and blue PMS 282 (presumably PMS solid coated colors). , these had changed to red PMS 193 and blue PMS 281. These latter PMS equivalents are listed on many websites including various other U.S. Government organizations, such as the Millennium Challenge Corporation's website Archived May 22, 2010, at the Wayback Machine. See also "United States of America" Archived July 13, 2010, at the Wayback Machine, Flags of the World.
    The website of the U.S. Embassy in Stockholm instead lists PMS 186 and PMS 288 as the colors specified by the U.S. Government Printing Office: "Colors of the U.S. Flag". United States Embassy Stockholm. November 2001.
    The Military Department of the State of California suggested PMS 200 for red in a 2002 document, "Flags over California, a history and guide" Archived June 13, 2011, at the Wayback Machine.
  33. ^ The Government Code; Title 11. State Symbols and Honors; Subtitle A; Chapter 3100 Archived July 26, 2010, at the Wayback Machine. Statutes.legis.state.tx.us. Retrieved on May 27, 2011.
Retrieved from "https://wiki.riteme.site/w/index.php?title=User:Jacobolus/Sandbox/flag&oldid=1135136619"