Jump to content

User:Girolamo Savonarola/test

From Wikipedia, the free encyclopedia
Girolamo Savonarola/test
An SR-3 fitted with a 400 foot camera magazine, on-board battery, extension eyepiece, and work light.
ManufacturerArri
Introduced1975 (SR-1), 1979, (SR-1 HS), 1982 (all SR-2 models), 1992 (SR-3 and SR-3 HS), 1999 (SR-3A and SR-3A HS)
Gauge16 mm
Weight4.99 kg/11.02 lbs (SR-1 and SR-2), with empty magazine and without lens; 7 kg/15.4 lbs (all SR-3 models), with loaded magazine and on-board battery.
MovementCompensating link with registration pin and fixed-gap film channel. SR-3A models also have sapphire rollers in film guide to enhance steadiness and reduce emulsion dust.
SpeedCrystal-accurate at 24 and 25 fps (SR-1 and SR-2). Also crystal-accurate at 30 fps in late SR-2 models. 5-75 fps with external variable speed control (SR-1 and SR-2). 10-150 fps with external variable speed control (all HS models). Crystal-accurate 5-75 fps programmable up to 0.001 increments (SR-3 and SR-3A). Crystal-accurate 10-150 fps programmable up to 0.001 increments between 10 and 99.999 fps and 0.1 increments between 100 and 150 fps (SR-3 HS and SR-3A HS).
Aperture size0.484" x 0.295" (Super 16) or 0.405" x 0.295" (Normal 16). All SR-3 models have a Universal Film Gate which can be switched between the two.
Aperture plateFixed (SR1 and SR-2). Universal Film Gate (see above; all SR-3 models).
Motor12V DC motor (SR1 and SR-2); 24V DC motor (all SR-3 models).
Operating noise level22 dB ±2 dB (SR-1 and SR-2); 28 dB ±2 dB (SR-1 HS and all SR-2 HS models); 20 dB ±2 dB (SR-3 and SR-3A); 27 dB ±2 dB (SR-3 HS and SR-3A HS).
Indicatorsfootage remaining, footage shot (SR-1 and SR-2); speed, run, counter (ft or m), shutter angle, time code (user bit and sensitivity level), voltage, incorrect movement, asynchronous speed, low battery, film end (all SR-3 models).
Lens mountArri bayonet (SR-1 and SR-2); Arri PL (later SR-2 models and all SR-3 models)
Lens controlArri-style follow focus.
ShutterReflex mirror. 180° (SR-1 and SR-2); 172.8° (Super 16 SR-1 and SR-2); manually variable with stops at 90°, 135°, 144°, 172.8° and 180° (SR-3 and SR-3 HS); additional 45° stop on SR-3A and SR-3A HS.
Viewfindercovers Super 35, rotates 360° and to left or right of camera with upright image continuously, can be used with either eye. Cross-compatible with Arriflex 535 viewfinder. Anamorphic switch available. Standard 80/20 beamsplitter, but entire viewfinder and beamsplitter can be replaced with 100% video tap for Steadicam or remote rigging.
Video assistIntegrated Video System (IVS) or IVS-2 standard; 0.5 inch CCD camera mountable through C-mount
Ground glassinterchangeable, includes Arriglow
Magazinestop-mounted, available in 400 ft (122 m), 1000 ft (300 m), and 400 ft Steadicam sizes. 1000 ft mag has torque motor. Older fixed-loop mags from Arri III and Arri II can be used, but won't be able to record time code
Magazine loadingfixed-loop displacement mags, takes up emulsion in (9P design)
Film coresstandard cores
Matte boxesArriflex MB or LMB models, 19 mm rods
Electronic accessories24 V, 3/5 A and 12 V, 3/5 A ports; shutter timing shift box (TSB), handcrank extension (HC), external display (EXD), zoom control (ZMU), wireless remote system (WRS), wireless remote control (WRC), remote control unit (RCU), universal motor controller (UMC), lens data archive (LDA), heated eyepiece (HE), lens data mount (LDM), integrated video system (IVS), Varicon flashing unit, rain deflector, Arrimotion data box, external sync unit (ESU), cine tape measure, accessory power box (APB), remote switch (RS), onboard video monitor, functional expansion module (FEM), motion control interface (MCI), CHS module for 130+ fps, lens data display (LDD)
Optical accessoriesshift and tilt lens system, eyepiece leveller, pentafinder, wide angle eyepiece
Other accessorieslightweight follow focus (LFF), lightweight support rods, third party accessories
Batteries24V
Environment protectionthird party covers and housings, rain deflector
Camera supportArrihead, bridge plate, handgrip, shoulder set, shoulder cushion, underslung bracket for Steadicam

The Arriflex SR is a 16 mm movie camera product line created by Arri in 1975 to replace the Arri 16BL line. The SR stands for silent reflex, which means that it is a quiet sync-sound camera with a reflex shutter. The full official name is Arriflex 16SR; however, the lack of a camera designated Arriflex 35SR (unlike the 16BL and 35BL lines) has led to the camera usually referred to only by the SR designation. Its most similar 35 mm line is the Arriflex 535, which debuted in 1990. It is currently considered to be the most popular 16 mm movie camera in usage, due to its wide range of wide range of features, intuitive design, high reliability, modularity, and widespread availability for rental or sale. As such, it is considered the 16 mm industry standard, although Aaton's XTR series also commands a considerable percentage of professional usage. Arri has since debuted the Arriflex 416 in 2006 which is incompatible with the SR series, and may very likely begin to supercede the SR line in the next few years.

Models and technical data

[edit]

(Most of the specifications noted apply forward to all successive models unless noted otherwise.)

435 and 435ES

[edit]

Arri debuted two models of the 435 in 1995: the 435 and 435ES. The latter is suffixed ES to denote electronic shutter capabilities; this means that the shutter angle is able to be continuously electronically adjusted, even while the camera is running, and set to any angle within a specific range (11.2° to 180°) to a great deal of precision (0.1°). Otherwise, they are identical in all other respects. These include a standard Arri PL mount; compatability with Super 35; frame rates adjustable both in forward and reverse between 1 and 150 frames per second, accurate to .001 frames per second; fixed-loop magazines and backwards compatibility with older Arri magazines; full compatibility with Arriflex 535 accessories; timecode capability; and a highly flexible viewfinder and video-tap system which could be switched out with other video tap options.

Other accessories and capabilities were modularly added in successive years, including Steadicam magazines (1996), an integrated video assist (1997), 1000 foot magazines and single frame control (1998), and 3-perf movement (2000).

435 Advanced

[edit]

The 435 Advanced was unveiled in 2001 and was the result of several years of feedback from users of the 435 system. While not only making standard some of the improved accessories made available in the interim, the 435 Advanced added more features to increase the versatility of the camera. These included a lower minimum frame rate of 0.1 frames per second, motion control integration with Arrimotion, and LDS (Lens Data System) lens recognition capability through electronic sensors.

435 Xtreme

[edit]

A new FEM (Functional Expansion Module) was added in 2003 to increase the camera's electronic feature set. Arri integrated this into the new 435 Xtreme, which was released in 2004. The new functions included faster ramping speed capability, a wider ramping range which could go down to 0.1 frames per second, further motion control interface abilities, integrated lens electronics, and integrated wireless radio signalling.

Three more accessories were released in 2005, exclusively for the 435 Advanced and 435 Xtreme: a hand-crank extension, a timing shift box to offset the phasing, and a remote LCD control panel designed for use on the "dumb side" of the camera.

References

[edit]
[edit]

[[Category:Movie cameras]]