Jump to content

User:Curtius/Ancient Technology of Coinage

From Wikipedia, the free encyclopedia

The production of coins in the ancient world required a number of technologies be in place. These are discussed below.

Metals used and their sources

[edit]

Gold is found in veins in quartz rock, pyrites, and arseno-pyrites. The weathering of these materials can lead to the gold being washed away by streams, usually being deposited in alluvial gravels in these rivers (placer deposits). Placer gold can be easily extracted via panning or the use of greasy sheepskins placed in the river or later is sluices; this is the probable origin of the legend of Jason and the Golden Fleece.

The most famous source of alluvial gold in the ancient world was Sardis which had placer deposits in the rivers Pactolus and Hermus (the modern Gediz River) nearby and also in the regions of Magnesia and Nymphaea, within a day's journey.[1] These were the source of King Croesus's wealth.[2] Mainland Greece had small amounts of gold in Macedon/Thrace. Production was very significantly increased when Philip II of Macedon took control of a number sites, especially Potidaea near Mt. Pangeaum, which he renamed Philippi. Diodorus wrote that the revenue from this source alone was 1000 talents per year.[3]

Direct mining of veins of gold is also attested; at Dolaucothi, North Wales extensive mining is seen from Roman times with some evidence of prehistoric mining as well.[4] Diodorus also described mining of gold in veins of quartz by prisoners in Egypt.[5]

Pliny knew that silver appears in gold ores naturally[6] and Herodotus used the term "white gold" to refer to the metal produced by smelting such ores to distinguish between it and refined ("cooked") gold.[7] When the concentration of gold and silver are manipulated to some standard, the mixture can be called electrum.[8]

In addition to the silver found in gold ores, silver is also found in argentiferous lead ores. The famous Athenian-controlled mines at Laurion[9] are examples of this. Silver was also found in Spain, Macedonia/Thrace, Siphnos, Stageira, Melos, Lesbos and Sardinia in classical times. It has proven possible to identify the site of the ore production of much archaic greek silver coinage by looking at the lead isotopes found in the trace amount of lead remaining in these coins and by examining the gold, bismuth and tin content.[10][11] This showed that most archaic coins were produced from the Laurion and Siphnos mines with some additional coinage coming from a third, as yet unidentified site. This type of analysis is no longer possible for later coinages as they are often produced by re-melting of earlier coinages.

The silver mining of Spain was greatly increased by the Carthaginians under Hamilcar Barca. Further increases in output were made by the Romans at New Carthage, Tuditania, Ilipa, Castulo and Rio Tinto.

Bronze is an alloy of copper and tin. Copper was mined by 8th millennium B.C. Malachite and azurite are strikingly coloured ores (green and blue respectively) and this, along with the plant species that grow abundantly in copper enriched soils may have been an aid in prehistoric "prospecting". Bronze is harder than copper and tin lowers the melting point, acting as a degassing agent so that castings tend to be more successful. A crucible containing tin from the Göltepe site in Anatolia has been dated to the late fifth to early third millennium B.C. After about 2000 BC, lead was sometimes also added; this increased the fluidity of the alloy and made casting easier.[12]

Copper was mined at Chalkis in Greece, Macedonia and Cyprus. In Roman times, copper mining in Spain was greatly expanded from very low earlier levels. Tin was mined in Brittany and the "Casserides" (tin islands), probably Cornwall and other sites from ca 500 B.C. Lead was mined at Laurion and on Sardinia and Ceos by the Greeks. The Romans also mined lead in Spain at Baetica (the Salutariensian and Antonian mines in this region were rented out for 255,000 denarii per year),[13] Cantabria, New Carthage and especially Linares, and in Sicily at Iglesias.[14] Under the Romans, lead production was very large, evidence of lead pollution from Roman industrial activities has been observed in the ice of Greenland's glaciers.[15]

Orichalcum (brass)

[edit]

Brass is an alloy of copper and zinc. It, like bronze is harder than copper but has a colour more similar to gold. Brass was first produced in Assyria in the late second millennium B.C. Brass coinage with 20% zinc first appeared in Bythinia and Phrygia during the first century B.C. Zinc was mined in Laurion. The emperor Augustus introduced orichalcum coinage in 23 B.C.

Mining & Metallurgy

[edit]

Mining

[edit]

The use of shaft mining, horizontal galleries with supported roofs and ventilation techniques dates to the bronze age.[16] Mining proceeded using iron hammers, primarily by slaves - Xenophon describes how individuals owned a thousand slaves in the mines and leased them out for a fixed daily rate.[17] The life of a miner was harsh - "Indeed on account of the magnitude of suffering, death to them is preferable to life."[18] They often did not have long to wait, even with the ventilation shafts,[19] the use of extension chimneys on shafts or air heating within shafts,[20] and the use of linen cloth fans to circulate the air,[21] miners often died from fumes.[22] Others died from roof collapse or rock falls[23] even though roofs were supported by wooden beams or arches.[24] Sometimes the losses of slaves were so large as to make an entire mine uneconomic.[25]

The actual work was done with heat and acid (fires and vinegar), battering rams weighing up to 150 pounds, iron hammers, and wedges.[26] Water was removed from mine shafts via Archimedean screws[27] and water wheels. In the Rio Tinto mines, at least eight levels of wheels are known, each wheel raising the water 3 to 4 meters.[28]

Mineral Separation

[edit]

When alluvial deposits were exploited, the separation of the mineral from the burden occurs as part of the panning/sluicing operations; the same process was often applied to the ores mined from other deposits. In this case it's necessary at first to crush and sieve the ore in water.[29] The crushing of ore to a powder was performed first by heavy iron pestles in stone mortars followed by grinding mills with a vertical axis by the Roman times.[30] The Laurion mines used a system in which the powdered ore was spread over a large, plastered, slightly inclined table surrounded by water channels. Water played over this (and recycled!) could be used to partially separate the metal from the ore.[31][32] In the Roman period, alluvial deposits were excavated using large volumes of water - as much as 34 million litres per day provided by multiple aqueducts at a single site.[33] The water could be delivered as a continuous stream or in waves to help remove unwanted components of the ore.[34]

Smelting

[edit]

Refining

[edit]

The separation of base and precious metals was done by a process called cupellation. The metal to be purified was mixed with lead, heated to 1100C under a blast of air. In those conditions, lead oxidises to PbO (called litharge) and absorbs all the base metals, leaving gold and silver as a separable mass.

Gold and silver could be separated ("parted") by a process called salt cementation. In ancient times cementation required that gold be beaten into thin sheets and placed in a coarse earthenware container with salt (sodium chloride), heated between 600 and 800C for a few days. On heating, the salt evolves chlorine gas and HCl. The latter reacts with water vapour from the wood fire and ferric oxides found in the earthenware container to produce FeCl. The various chlorine compounds react with the silver, particularly along grain boundaries in the metal to produce AgCl which is volatile. The silver in the bulk of the grain diffuses to the boundaries and also reacts, the gold remains. The silver contaminates the container and the furnace from which it can be recovered by cupellation. The parting process is still the standard assay process; when the result of parting is no decrease in the weight of gold, the gold is pure.

Excavations and their analysis have identified a gold refining operation There is much direct evidence including fragments of gold leaf, earthenware shards with traces of gold drops and characteristic dis-coloration due to heating and silver chloride contamination, cupellation sites used in the silver recovery process, litharge from these sites complete with the impression of the resulting button of purified silver.[35]

The parting process was used at least as early as the third millenium BC at Ur to remove silver from the surface layer of gold-silver alloyed objects. This made the object golden on the surface while preserving its weight. The process of separating the two does not seem to have been commonly done before the introduction of gold coinage and it has been shown that there are marked differences in the composition of gold objects made by those who produced a gold coinage and those who did not.[36][37]

The mercury amalgamation process was also used in ancient times.[38] This come into use after the method of extracting mercury from cinnabar ore mentioned by Theophrastus[39] was developed in Spain around the end of the first century BC.[40]

Assaying

[edit]

There were three main methods available for assaying precious metals in antiquity.[41]

  • The measurement of specific gravity is famously ascribed to Archimedes.[42] This technique is practical for large objects, but surface tension effects make it extremely inaccurate for smaller objects.
  • The term "Fire assay" refers to re-refining the material and comparing the refined weight with the original. This technique is accurate (especially if repeated until the weight no longer changes) but destructive.
  • Touchstones were stones with uniform, dense, matte surfaces; the gold was rubbed on them and the streak was compared to streaks created from materials of known composition. Mt Tmolus, from which the rivers Pactolus and Hermus ran, was a source of such stones.[43]

Minting

[edit]

The minting process for ancient coinage was as follows

  • A blank was produced of the appropriate weight of the chosen metal.
  • This blank was heated and placed between two dies containing the negative of the impression to be created.
  • The upper (reverse) die was struck with a hammer and the metal was stamped by it and the lower (obverse) die resting on an anvil.

The operation of the mint thus required three separate products, dies, blanks, and coins.

Die Production

[edit]

Blank Production

[edit]

Coin Production

[edit]

Evidence

[edit]

experiments

[edit]

[50][51][52]

Minting Errors

[edit]

Casting

[edit]

Some ancient coins were cast rather than minted. In this case

Quality Control

[edit]
  • "Lydian electrum royal coinage has been shown to be of very consistent composition."[54]
  • [55]
  • Mint Marks
  • Control Marks
  • Gouging: [56]
  • Serration #249

Gilding, Plating & Fourees

[edit]
  • [57]
  • [58]
  • [59]
  • [60]
  • Pászthory[61] identifies both an electrum plated lead-core and an electrum plated silver core coin.

Volume of production

[edit]

Modern Evidence

[edit]
  • Lead analysis:
  • metallography [66]
  • Platinum-group inclusions in Celtic coinages indicate contact with the Mediterranean.[67]
  • Celtic Gold Coin Production techniques.[68]
  • electrum and inclusions[69]


See also

[edit]

Notes

[edit]
  1. ^ Healy, ibid
  2. ^ Ramage 2000
  3. ^ Diodorus Siculus 16.8.3
  4. ^ Burnham 2004
  5. ^ Diodorus Siculus 3.12-13.1
  6. ^ Pliny xxxiii, 80
  7. ^ Herodotus i,94, 1.
  8. ^ Healy 1980
  9. ^ Talbot 2000:59:D4
  10. ^ Gale 1980
  11. ^ Price 1980
  12. ^ Henderson 2000:213
  13. ^ Pliny 34.165
  14. ^ White 1984:239
  15. ^ Hong 1994
  16. ^ White 1984:34
  17. ^ Xenophon 4.14-4.17
  18. ^ Diodorus Siculus 5.38
  19. ^ Theophrastus a 24
  20. ^ Calhoun 1926:144
  21. ^ Pliny 31.49
  22. ^ Lucretius 6.808-815
  23. ^ Statius 6.880-885
  24. ^ Pliny 33.67-8
  25. ^ Strabo 12.3.40
  26. ^ Pliny 33.69
  27. ^ Diodorus Siculus 5.37
  28. ^ Henderson 2000:218
  29. ^ Strabo III.2.10
  30. ^ White 1984:35,120-121
  31. ^ Calhoun 1926:147-152
  32. ^ White 1984:35,120-121
  33. ^ White 1984:116-119
  34. ^ Pliny 33.66-78
  35. ^ Ramage 2000
  36. ^ Craddock 2000a
  37. ^ Craddock 2000b
  38. ^ Vitruvius 7.8.4
  39. ^ Theophrastus b 60
  40. ^ White 1984:124
  41. ^ Craddock 2000d
  42. ^ Vitruvius 9.9-12
  43. ^ Theophrastus b 45-47
  44. ^ Gerin 1993
  45. ^ Hill 1922
  46. ^ Healy 1993
  47. ^ Schwabacher 1966
  48. ^ Paz 1986
  49. ^ Hill 1922
  50. ^ Beer Tobey 1993
  51. ^ Hill 1922
  52. ^ Sellwood 1963
  53. ^ Goddard 1993
  54. ^ Cowell 1998
  55. ^ Varoufakis 1998
  56. ^ Stannard 1993
  57. ^ Cradduck 2000a
  58. ^ La Niece 1993
  59. ^ Oddy 1993
  60. ^ Anheuser 1998
  61. ^ Pászthory 1980
  62. ^ Craddock 1998
  63. ^ Stos-Gale 1998
  64. ^ Hardwick 1998
  65. ^ Beer-Tobey 1998
  66. ^ La Niece 1998
  67. ^ Steffgen 1998
  68. ^ Gebhard 1998
  69. ^ Craddock 2000c

References

[edit]
  • Anheuser, Kilian (1998), Silver-plated-on-iron Roman coins in Oddy 1998
  • Archibald, M.M. & Cowell, M.R. (1993). eds, Metallurgy in Numismatics, Volume 3, Royal Numismatic Society Special Publication No. 24, London. ISBN 0-901405-29-9
  • Beer-Tobey, Leslie & Tobey, A.G. (1993), Experiments to simulate ancient Greek coins, in Archibald 1993.
  • Beer-Tobey, L. & Gale, N.H. & Kim H.S. and Stos-Gale Z.A. (1998), Lead isotope analysis of four late archaic silver ingots from the Selinus hoard, in Oddy 1998.
  • Burnett, A.M. and Hook, D.R. (1993), Early Roman coin production, in Archibald 1993.
  • Burnham, Barry and Helen, (2004). Dolaucothi-Pumsaint: Survey and Excavation at a Roman gold-mining complex 1987-1999, Oxbow Books.
  • Calhoun, George M. (1926). The Business Life of Ancient Athens, University of Chicago Press.
  • Craddock, Paul T. & Burnett, A.M. (1998), The composition of Etruscan and Umbrian copper alloy coinage in Oddy 1998.
  • Craddock, P.T. (2000a). Historical Survey of Gold Refining I: Surface Treatments and Refining Worldwide, and in Europe prior to AD 1500. in Ramage 2000.
  • Craddock, P.T. (2000b). Reconstruction of the Salt Cementation Process at the Sardis Refinery. in Ramage 2000.
  • Craddock, P.T. (2000c). The Platinum Group Element Inclusions in Ramage 2000.
  • Craddock, P.T. (2000d). Assaying in Antiquity in Ramage 2000.
  • Cowell, M.R.; Hyne, K.; Meeks, N.D.; Cradduck, P.T. (1998) Analyses of the Lydian Electrum, Gold and Silver Coinages in Oddy 1998.
  • Diodorus Siculus (60 BC) Historical Library.
  • Gale, N.H & Gentner, W. & Wagner, G.A. (1980). Mineralogical and Geographical Silver Sources of Archaic Greek Coinage in Metcalf 1980.
  • Gebhard, R.; Lehrberger, G.; Morteani, G.; Raub, Ch.; Steffgen, U.; Wagner, U. (1998) Melting and Alloying Techniques of Celtic Gold Coins in Central Europe in Oddy 1998.
  • Gerin, Dominique (1993) Techniques in die-engraving: some reflexions on obols of the Arcadian League in the 3rd century BC, in Archibald 1993.
  • Goddard, John P. (1993), Roman brockages: a preliminary survey by their frequency and type. in Archibald 1993.
  • Hardwick, Nicholas & Stos-Gale, Zofia & Cowell, Michael, (1998) Lead isotope analysis of Greek coins of Chios from the sixth to the fourth century BC in Oddy 1998.
  • Healy, J.F. (1978), Mining and Metallurgy in the Greek and Roman World, London. ISBN 0-500400-35-0
  • Healy, John F. (1980), Greek white gold and electrum coin series in Metcalf 1980.
  • Healy, John F. (1993), Mint practice at Mytilene: evidence for the use of hubs, in Archibald 1993.
  • Henderson, Julian (2000). The Science and Archaeology of Materials : An Investigation of Inorganic Materials, Routledge. ISBN 0-415-19934-4
  • Herodotus (431-425 BC), The Histories.
  • Hill, George F. (1922), Ancient Methods of Coining, Numismatic Chronicle 1922, p1-42, Reprinted by Durst, in 1997. ISBN 0-942666-30-5
  • Hong, Sungmin; Candelone, Jean-Pierre; Patterson, Clair C.; Boutron, Claude F. (1994) "Greenland Ice Evidence of Hemispheric Lead Pollution Two Millennia Ago by Greek and Roman Civilizations", Science, 265(5180) 1841-1843.
  • La Niece, Susan (1993), Technology of silver-plated coin forgeries in Archibald 1993.
  • La Niece, Susan (1998), Metallography in numismatics in Oddy 1998.
  • Lucretius (1st century BC), On the Nature of Things.
  • Metcalf, D.M. & Oddy, W.A. (1980). eds, Metallurgy in Numismatics, Volume 1, Royal Numismatic Society Special Publication No. 13, London. ISBN 0-901405-14-0
  • Pliny (77), Natural History.
  • Oddy, W.A. (1993). The technology of gilded coin forgeries. in Archibald 1993
  • Oddy, Andrew & Cowell, Michael (1998). eds, Metallurgy in Numismatics, Volume 4, Royal Numismatic Society Special Publication No. 30, London. ISBN 0-901405-38-8
  • M. Paz Garcia-Bellido (1986), A Hub From Ancient Spain, Numismatic Chronicle 146, p76.
  • Pászthory, Emmerich Investigations of the early electrum coins of the Alyattes type. in Metcalf 1980.
  • Price, M.J. (1980) The Uses of Metal Analysis in the Study of Archaic Greek Coinage: Some Comments in Metcalf 1980.
  • Ramage, Andrew and Craddock, Paul (2000), King Croesus' Gold; Excavations at Sardis and the History of Gold Refining, Trustees of the British Museum, ISBN 0-7141-0888-X
  • Schwabacher, W. (1966), The production of hubs reconsidered, Numismatic Chronicle Seventh Series, VI, p41.
  • Sellwood, D.G. (1963), Some experiments in Greek minting technique Numismatic Chronicle 1963, p217-231
  • Stannard, Clive (1993), The adjustment al marco of the weight of Roman Republican denarii blanks by gouging. in Archibald 1993.
  • Statius (81-96), Thebaid.
  • Steffgen, U.; Gebhard, R.; Lehrberger, G.; and Morteani, G. (1998) Platinum Group Metal Inclusions in Celtic Gold Coins in Oddy 1998.
  • Stos-Gale, Zofia Anna (1998), 'Lead isotope analysis of coins - a review in Oddy 1998.
  • Strabo (early 1st century A.D.) Geographica.
  • Talbot, Richard J.A. (2000) ed, Barrington Atlas of the Greek and Roman World, Princeton University Press. ISBN 0-691-03169-X
  • Theophrastus a (before 285 BC), On Fire.
  • Theophrastus b (before 285 BC), On Stones.
  • Varoufakis, George J. (1998). Quality control of silver coins in antiquity in Oddy 1998.
  • Vitruvius (27-23 BC),De architectura
  • White, K.D. (1984). Greek and Roman Technology, Cornell University Press. ISBN 0-8014-1439-3
  • Xenophon (before 355 BC) Ways and Means.