Jump to content

User:Ben banet/sandbox

From Wikipedia, the free encyclopedia

Issues-

The examples and perspective in this article deal primarily with the United States and do not represent aworldwide view of the subject(December 2010)
This article needs additional citations for verification(February 2012)

Dam removal

[edit]

Dam removal is the process of removing dams from river systems. Dams are typically removed for one or more of the following reasons: environmental damage, the risk of dam failure, or economic reasons.

All dams negatively affect the aquatic environments of rivers that they are located on, but those effects are often negated by the stated purpose of the dam whether it hydroelectric power, flood control, or some other reason. When the negative environmental effects outweigh the benefits, a dam may be considered for removal. This happened on the Elwha River in Olympic National Park in Washington when extraordinarily rich salmon habitat was being disrupted by an out-dated hydroelectric plant.

Dam failure is another threat that can lead to the removal of dams. Sometimes the fear of failure is due to seismic activity or the placement of the dam. Additionally, the older the dam is, the more likely it is to fail. Around the world, a growing number of 20th-century dam construction projects are reaching the end of their design lives: as of 1996, 5,000 large dams around the world were more than 50 years old.[1]  By 2020, in the United States alone, 85% percent of the country’s dams will have exceeded that 50 year threshold.[1]

Finally, economic reasons often provide a convincing reason to remove a dam. The cost of keeping outdated hydroelectric equipment running decades after it was installed or upgrading dam safety systems may not be worth it. Additionally, population centers and industrial facilities that demanded hydropower decades ago can move and leave the dam without a purpose.

Since around 2000, most major dam removal projects, and the largest single project, the $350M removal of two Olympic Peninsula dams as part of the Elwha Ecosystem Restoration, have been driven by restoration of river habitat and fish passages. Inspired by the Elwha project, a French group called SOS Loire Vivante successfully lobbied for the removal of two dams in the Upper Loire Valley, and the re-engineering of a 1941 hydroelectric dam on the Allier River to restore habitat for Atlantic salmon. [2]

In the United States roughly 900 dams were removed between 1990 and 2015, with another 50 to 60 more every year. [3] France and Canada have also completed significant removal projects,[4] and Japan's first removal, of the Arase Dam on the Kuma River, began in 2012 and is scheduled to complete in 2018. [5]

Contents[edit]

  • 1 Purposes and effects of dams
  • 2 Benefits of Dam Removal
  • 3 Methods of Dam Removal
    • 3.1 Notch/ release approach
    • 3.2 Rapid release approach
    • 3.3 Dig and dewater approach
    • 3.4 Retained sediment approach
  • 4 Alternatives to Dam Removal
  • 5 Dam removal projects in the United States
  • 6 Dams being considered for removal
  • 7 See also
  • 8 References
  • 9 External links
  1. Purposes and effects of dams[edit]

Many of the dams in the eastern United States were built for water diversion, agriculture, factory watermills, and other purposes that are no longer useful. Because of the age of these dams, over time the risk for catastrophic failure increases. In addition, many of these dams block anadromous fish runs, such as Atlantic salmon and American shad, and prevent important sediments from reaching estuaries.

Many dams in the western United States were built for agricultural water diversion in the arid country, with hydroelectric power generation being a very significant side benefit. Among the largest of these water diversion projects is the Columbia Basin Project, which diverts water at the Grand Coulee Dam. The Bureau of Reclamation manages many of these water diversion projects.

Some dams in the Pacific Northwest and California block passage for anadromous fish species such as Pacific Salmon and steelhead. Fish ladders and other passage facilities have been largely ineffective in mitigating the negative effects on salmon populations. Bonneville Power Administration manages electricity on 11 dams on the Columbia River and 4 on the Snake River, which were built by the Army Corps of Engineers.

In the Desert Southwest, dams can change the nature of the river ecosystem. In the particular case of the Glen Canyon Dam, the originally warm, sediment-filled, muddy water, instead runs cold and clear through the Grand Canyon, which has significant impacts on the downstream ecosystems. Three native fish species have become extinct in the Grand Canyon and others are endangered since the dam was completed, including humpback chub and razorback sucker.

Some dam projects, such as those on the Salt River Project in Arizona, eliminate the flow of the river downstream, by diverting the flow into the Arizona Canal system for use in agriculture and urban usage, such that only a dry channel or arroyo heads out across the desert.

So much water is taken out of the Colorado River for agriculture, urban use, and evaporation behind the dams, that the river no longer flows into the Gulf of California.

While the need for clean, alternative energy sources are important, with so many considerations involved, sometimes it makes sense to evaluate whether the benefits of dams outweigh the costs of safety concerns, ecosystem functions, and management expenses.

2.  Benefits of Dam Removal

3. Methods of Dam Removal

There are severals ways dams can be removed and the chosen method will depend on many factors. The size and type of the dam, the amount of sediment behind the dam, the aquatic environment below the dam, who owns the dam and what their priorities are, and the timeframe of dam removal are all factors that affect how the dam will be removed. Removal is costly no matter what and expenses typically rise when greater weight is given to environmental concerns. Fortunately, the cost of dam removal is usually shared by multiple stakeholders such as the dam owner and either the federal, state or local government. Four of the most common dam removal methods are described below.

Sediment management is a driving force in all of them. A common problem for dams is how sediment carried naturally by the river is deposited in the reservoir and eventually fills it up with silt. This excess sediment reduces the hydroelectric generating capacity of a reservoir, changes the river channel downstream, traps nutrient-rich sediment behind the dam, and can put a dangerous amount of pressure on the dam itself. Oftentimes the sediment stored in a reservoir is good for the riparian corridor below the dam, can rebuild fish habitat, provide nutrients, and add onto a beach or estuary. Other times, the sediment can increase the turbidity of the river harming fish, scour the landscape, and bury infrastructure.

Sediment should always be tested before it is released to determine if it will be harmful or not to the landscape below the dam. Dam removal can have disastrous consequences if this is not done. When the Fort Edward Dam on the Hudson River was removed in the 1970’s, PCB toxins in the sediment had devastating effects on human and wildlife health downstream.

    • 3.1 Notch and release approach

The notch and release approach

The notch and release approach is commonly used because of its ecological benefits. It is a slow method in which the reservoir is drained through notches cut into the dam. New notches are cut in so the water drains out of the reservoir at a consistent flow. The sediment trapped behind the dam flows downstream in a fixed rate that allows the ecosystem to adjust to the changes. This method can takes months or even over a year, but has proven success with restoring fish species to rivers. The Elwha and Glines Canyon dam removal project used the notch and release approach to great success.

    • 3.2 Rapid release approach

Rapid release approach

The rapid release approach is both the quickest and least expensive way to remove a dam, but comes with significant drawbacks. In this approach, a large tunnel is dug through the base of the dam and then connected to the reservoir. The entire body of water will drain through this tunnel in a matter of minutes or hours and the massive release of water and sediment can cause severe flooding and erosion along the river downstream for miles. This can devastate the riparian ecosystem along the river as well as dangerously scour bridge pilings, buried pipes, levees, and other infrastructure. However, if the reservoir held back by the dam is relatively small and quickly drains into a larger river or lake, this approach can be carried out with minimal impact on either the ecosystem or human infrastructure.

    • 3.3 Dig and dewater approach

The dig and dewater approach is typically the most expensive dam removal method, but is necessary in some cases. It entails emptying the entire reservoir, allowing the sediment to dry, and then transporting it to a safe location for disposal. It is costly and slow, but if the reservoir is located very near hydroelectric generating facilities that would be greatly impacted by released sediments, it may be necessary. Another situation is if the sediments behind the dam contain toxins. Hauling them away and disposing of them safely is important for the ecological health of the river.

    • 3.4 Retained sediment approach

The retained sediment approach is the final commonly used approach and involves leaving the sediment behind where it is. To do this, the river or creek must be rerouted around the damsite which can prove expensive and challenging. This may be carried out in places where the dig and dewater approach makes sense, but are too remote to be cost-effective.

4. Alternatives to Dam Removal

While less than 1% of United States dams are being considered for removal, there has been a push in recent years to address the deficiencies in existing dams without removing them[2]. These goals include maximizing the efficiency of existing dams and minimizing their environmental impact. Updating equipment and acknowledging that dams have a limited life span are two ways to achieve those goals. As part of them, a plan for decommissioning the dam and restoring the river should be drawn up long before the dam exceeds its design life. One part of river restoration that does not have to wait until the dam is removed is introducing environmental flow. Having variable amounts of water flow through the dam at different seasons mimics natural seasonal variations in water level from winter and spring storms. Additionally, fish ladders can be added to dams to increase the connectivity of a river and allow fish to reach their spawning grounds. There’s debate about the effectiveness of fish ladders, but generally some fish will make it through as opposed to zero fish spawning in their traditional location.

Dam removal projects in the United States

[edit]
  • 1973 - Lewiston Dam, South Fork Clearwater River, Idaho – The 39 ft (12 m) dam was built in 1927 as a hydroelectric facility, but lacked fish ladders. Upon completion of the Lower Granite Dam and its reservoir, the lack of gradient on the river made it obsolete. Its removal improved salmon runs on the river.
  • 1997 - Marie Dorian Dam, Walla Walla River, Oregon – The 8 ft (2.4 m) dam blocked passage to Pacific Salmon andsteelhead into the Blue Mountains from the Columbia Basin.
  • 1999 - Edwards Dam, Kennebec River, Maine – Built in 1837, the 24 ft (7.3 m) dam blocked access to Atlantic Salmonand American Shad. This was a landmark case in which a U.S. federal agency, the Federal Energy Regulatory Commission, required the decommissioning and removal of a dam against the operator's wishes.
  • 2004 - Embrey Dam, Rappahannock River, Virginia - The 22-foot-tall, 770-foot-long, 1910 hydroelectric Embrey Dam was blown up with 600 lbs of explosives by the U.S. Army Dive team out of Ft. Eustis, VA on February 23, 2004.[1] The aim of removal was to re-open miles of spawning grounds to aid populations of American Shad, herring, catadromous American eel, and other species.[2] The historical character of the Ambursen-type reinforced concrete structure required a parallel documentation and (partial) preservation project by industrial archeologists.[3] In 2008 longtime U.S. Senator from Virginia John Warner described the removal of Embrey Dam as the "proudest achievement in his legislative career."[4]
  • 2004 - Cuddebackville Dam, Neversink River, New York - Built in two portions dating from the 1820s (for water diversion into a canal) and 1915 (for hydroelectric power), the dam had been abandoned since 1945. The dam was removed in October 2004 by the U.S. Army Corps of Engineers, in a novel partnership with theNature Conservancy, to benefit the aquatic life in the area, specifically the Dwarf Wedge Mussel and the American Shad.
  • 2007 - Marmot Dam, Sandy River, Oregon – The removal of this 50 ft (15 m) dam by Portland General Electric has been extremely successful at improving access forPacific Salmon and steelhead to the upper Sandy River watershed up into the Mount Hood Wilderness.
  • 2008 - Milltown Dam, Missoula, Montana - Dam held startling levels of toxic sediments from 100 years of mining and logging. Removal improved water quality, trout habitat, and the general ecological condition of the watershed.
  • 2009 - Savage Rapids Dam, Rogue River, Oregon – Built for agricultural water diversion, it was removed by the Bureau of Reclamation due to its out-dated facilities and non-functioning fish ladders that prevented fish migration past the dam.
  • 2011 - Condit Dam, White Salmon River, Washington – The 123 ft (37 m) dam blocked access for Pacific Salmon and steelhead runs on 33 miles (53 km) of river.PacifiCorp proposed to remove the dam, rather than paying for fish passage upgrades. Removal was proposed in 2006, but actions from Skamania and Klickitatcounties held up the process. In fall 2008, salmon were trucked up above to dam to allow them to spawn higher up the river. In October 2011, PacifiCorp contractors used explosives to blow a 15-foot (4.6 m) hole in the dam to drain its reservoir and allow young salmon to enter the Columbia River and head to sea.
  • 2012 - Elwha and Glines Canyon Dams, Elwha River, Washington – The largest dam removal project in history is the Elwha Ecosystem Restoration project on theOlympic Peninsula of Washington. Starting in 2012, and finishing in 2014, the 108 ft (33 m) Elwha Dam and the 210 ft (64 m) Glines Canyon Dam were removed to restore stocks of Pacific Salmon and trout species to the Elwha River watershed. The removal of these blockades allows migratory salmon to travel past the dam sites and upriver, an event that has not occurred since the dams' creation in 1913. After spawning there, the salmon die and their carcasses decompose, releasing marine nutrients laid down in their bodies as they fed in the open ocean. This reintroduction provides a valuable research opportunity for interested parties.[5] Since the dam removal, reservoir beds that looked like moonscapes have returned to vibrant rich habitat. Within a year of the Elwha Dam removal, an increase in salmon-derived nutrients was documented in the American dipper [6]

Dams being considered for removal

[edit]

Lower Snake River Dams

[edit]

The lower four Snake River dams including the 100 ft (30 m) Lower Granite Dam, 98 ft (30 m) Little Goose Dam, 100 ft (30 m)Lower Monumental Dam, and 100 ft (30 m) Ice Harbor Dam. These dams, built by the United States Army Corps of Engineers, serve as hydroelectric power sources as well as ensuring agricultural barge traffic navigation to Lewiston, Idaho.

The lower four dams on the Snake River have collected large amounts of sediment. In fact, 3 million cubic yards of sediments are deposited each year.[7] To combat this trend, cities like Lewiston, Idaho and many others along the Snake River have built a system of levees maintained by the Army Corps of Engineers. The levees in Lewiston were designed to leave five feet between water levels and the top of the levees. Today, there is only up to two feet remaining. As water levels continue to rise, either some of the dams must be removed or dredged, or the levees will continue to grow. The Corps admits that the amount of sediment in the riverbed is too great for dredging to be effective, and Lewiston community leaders are worried that higher levees will further cut the town off from its rivers.[8]

Rindge Dam

[edit]

The 100 ft (30 m) Rindge Dam on Malibu Creek in the Santa Monica Mountains of California was built in 1924 and has been allowed to fill with sediment, making it obsolete. Malibu Creek once supported the southernmost steelhead population in the world. But today, steelhead no longer occupy the creek.

Klamath River Dams

[edit]

Demonstrators calling for removal of dams on the Klamath River in Oregon and California, USA

Four dams on the Klamath River including the John C. Boyle, Copco No. 1, Copco No. 2, and Iron Gate dams. These dams are operated by PacifiCorp and are up for relicensing. In addition to blocking salmon runs, the reservoirs that form behind the dams built up extremely high levels of toxic algal blooms.

On September 29, 2009, a tentative agreement was reached to remove the four dams; if the plan proceeds they will be dismantled starting in 2020.[9] As of February 2016, the states of Oregon and California, the dam owners, federal regulators and other parties reached an agreement to remove all four Klamath basin dams by the year 2020, pending approval by the Federal Energy Regulatory Commission.[10]

Glen Canyon Dam

[edit]

Glen Canyon Dam

The 710 ft (220 m) Glen Canyon Dam has been proposed for removal because of the negative effects it has on the water quality and riparian habitat of the Colorado River inGrand Canyon National Park. In addition, the reservoir impounded behind it, Lake Powell has filled all of the canyons for up to 160 miles (260 km) above the dam. This lake, while providing recreational opportunities, has eliminated more than 160 miles (260 km) of habitat for endangered Colorado River fish species. The reservoir also loses more than 6 percent of the total annual flow of the Colorado River to evaporation and seepage.[11] Advocates of dam removal also cite these losses of stored water as reason to decommission the dam. If it were to be removed, it would dwarf any dam removal project in history.

O'Shaughnessy (Hetch Hetchy) Dam

[edit]

O'Shaughnessy Dam in California, United States was completed in 1923 and represented the first great environmental controversy in the US as it was constructed in a national park.[12] The debate over the dam and reservoir continues today. Preservationist groups such as the Sierra Club lobby for the restoration of the valley, while others argue that leaving the dam in place would be the better economic and environmental decision.[13]

Kinnickinnic River Dams - The Upper "Junction Falls" Dam & The Lower "Powell Falls" Dam[edit source | edit]

[edit]
This section may lend undue weight to certain ideas, incidents, or controversies. Please help to create a more balanced presentation. Discuss and resolve this issue before removing this message. (January 2016)
This section may contain an excessive amount of intricate detail that may only interest a specific audience.Please help by spinning off or relocating any relevant information, and removing excessive detail that may be againstWikipedia's inclusion policy. (January 2016)

The Upper "Junction Falls" Dam on the Kinnickinnic River in River Falls, Wisconsin as it appears today. The Historic Junction Falls are obscured by its presence, the lowest ledge of the Junction Falls now sits as the dry ledge below the base of the dam.

The historic Junction Falls of the Kinnickinnic River in River Falls, Wisconsin prior to the construction of any dam in the Kinnickinnic River. This photograph was originally taken by John Carbutt between 1864 - 1865 and published as a stereoview in a set of scenery pictures of "The Upper Mississippi, Minnesota and the Vicinity".[14]

Main article: Kinnickinnic_River_(St._Croix_River)

The two remaining dams on the Kinnickinnic River in River Falls, Wisconsin are being considered for removal in order to completely restore the Kinnickinnic River to its natural state.[15] The Kinnickinnic River, called the Kinni for short, is a 22-mile-long (35 km)[16] river in northwestern Wisconsin in the United States. The Kinni is a cold water fishery supporting a population of native Brook Trout and naturally reproducing Brown Trout. The Kinnickinnic River is officially designated as a Class I trout stream by the WI DNR, indicating it is a "high quality" trout water that has sufficient natural reproduction to sustain populations of wild trout, at or near carrying capacity.[17] The Kinnickinnic is also designated as an Outstanding Resource Water (ORW) by the WI DNR both above State HWY 35, and below the Powell Falls Dam, however, the stretch of the Kinni through the City of River Falls is not included in this designation where the river is impounded into two reservoirs which do not support a fishery. This ORW designation indicates the Kinni provides outstanding recreational opportunities, supports valuable fisheries and wildlife habitat, has good water quality, and is not significantly impacted by human activities.[18] This designation indicates that the State of Wisconsin has determined the Kinnickinnic River warrants additional protection from the effects of pollution. These designations are intended to meet federal Clean Water Act obligations requiring Wisconsin to adopt an “antidegradation” policy that is designed to prevent any lowering of water quality – especially in those waters having significant ecological or cultural value.[18]

Local stakeholder organizations in the FERC relicensing process include the Friends of the Kinni, the Kiap-TU-Wish Chapter of Trout Unlimited, the Kinnickinnic River Land Trust, and the River Alliance of Wisconsin

  1. ^ "Removing Dams and Restoring Rivers". Retrieved 2016-05-14.
  2. ^ "Removing Dams and Restoring Rivers". Retrieved 2016-05-14.