Transistor diode model
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
In a diode model two diodes are connected back-to-back to make a PNP or NPN bipolar junction transistor (BJT) equivalent. This model is theoretical and qualitative.
Examples
[edit]
PNP transistor
[edit]To make a PNP transistor, the cathodes of both diodes are back-to-back connected to form a large N type base region.[1]
NPN transistor
[edit]To make an NPN transistor, the anodes of both diodes are back-to-back connected to form a large P type base region.[1]
Base biasing
[edit]As the base region is a combination of two anodes or two cathodes, and is not lightly doped, more base biasing is required for making this model operational.[citation needed]
References
[edit]External links
[edit]- https://en.wikiversity.org/wiki/Electronic_Circuits/Introduction_to_the_simple_diode_npn_model
- https://www.st-andrews.ac.uk/~www_pa/Scots_Guide/info/comp/active/BiPolar/dtob.gif
 | This electronics-related article is a stub. You can help Wikipedia by expanding it. |