Template:Infobox protected area/doc

This template can be used to generate an infobox for a protected area. It is part of the Protected areas WikiProject.

Usage

The "basic usage" templates includes selected parameters which can be used to form a completely functional infobox. The "full usage" template includes all of the extra parameters which may be added. Either can be pasted into a new article. See below for working examples.

{{{name}}}
{{{alt_name}}}
An unknown IUCN category was entered.
[[File:{{{logo}}}|frameless|alt={{{logo_alt}}}|upright={{{logo_upright}}}]] {{{logo_caption}}}
[[File:{{{photo}}}|{{{photo_width}}}|alt={{{photo_alt}}}]] {{{photo_caption}}}
{{{map_caption}}}
Location	{{{location}}}
Nearest city	{{{nearest_city}}}
Coordinates	0°N 0°E / 0; 0{{{coords_ref}}}
Length	{{{length}}}
Width	{{{width}}}
Area	{{{area}}}{{{area_ref}}}
Elevation	{{{elevation}}} or {{{elevation_avg}}}, {{{elevation_min}}}, {{{elevation_max}}}
Dimensions	{{{dimensions}}}
Designation	{{{designation}}}
Authorized	{{{authorized}}}
Disestablished	{{{disestablished}}}
Named for	{{{named_for}}}
Visitors	{{{visitation_num}}} (in {{{visitation_year}}}){{{visitation_ref}}}
Governing body	{{{governing_body}}}
World Heritage site	{{{world_heritage_site}}}
Website	{{{website}}}
{{{embedded}}}
{{{embedded2}}}

Basic usage

Full usage

{{Infobox protected area | name = | alt_name = | iucn_category = | iucn_ref = | logo = | logo_alt = | logo_upright = | logo_caption = | photo = | photo_width = | photo_alt = | photo_caption = | map = <!-- or | map_image = --> | map_width = | map_alt = | map_caption = | relief = | label = | label_position = | mark = | marker_size = | mapframe = <!-- "yes" to show an interactive map --> | location = | nearest_city = | coordinates = | coords_ref = | area_ha = | designation = | authorized = | created = | designated = | established = | disestablished = | visitation_num = | visitation_year = | visitation_ref = | governing_body = | administrator = | operator = | owner = | world_heritage_site = | website = | url = | child = | embedded = }}

{{Infobox protected area |name = |alt_name = |iucn_category = |iucn_ref = |logo = |logo_alt = |logo_upright = |logo_caption = |photo = |photo_width = |photo_alt = |photo_caption = |map = <!-- or |map_image = --> |map_width = |map_alt = |map_caption = |AlternativeMap = |relief = |label = |label_position = |mark = |marker_size = | mapframe = <!-- "yes" to show an interactive map --> |location = |nearest_city = |nearest_town = |coordinates = |coords_ref = |length = |length_mi = |length_km = |width = |width_mi = |width_km = |area = |area_ha = |area_acre = |area_km2 = |area_sqmi = |area_ref = |elevation = |elevation_avg = |elevation_min = |elevation_max = |dimensions = |designation = |authorized = |created = |designated = |established = |disestablished = |named_for = |visitation_num = |visitation_year = |visitation_ref = |governing_body = |administrator = |operator = |owner = |world_heritage_site = |website = |url = |child = |embedded = |embedded1 = |embedded2 = }}

Parameter descriptions

This table describes all parameters which can be used in building infoboxes. Only the name parameter must be assigned a value.

Field name	Description
name	Required. The official name of the protected area. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Mount Washington (New Hampshire) then name=Mount Washington.
alt_name	If there is a common English name for the area use for the name parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
iucn_category	Strongly recommended. The IUCN category associated with the protected area. Valid values are Ia, Ib, II, III, IV, V, or VI. See IUCN Categories.
iucn_ref	A reference for the iucn_category.
logo	The logo of the area.
logo_upright	The upright value of the logo.
logo_alt	The logo alt text. See WP:ALT.
logo_caption	The caption that will appear below the logo.
photo	The name of an image file to be displayed. No special formatting is needed.
photo_width	Can be used to change the display width the image. The default and maximum value is 284px. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180px or 220px. For example photo_width=200 and not photo_width=200px.
photo_alt	Alt text for the photo, for visually impaired readers. See WP:ALT.
photo_caption	The caption which will appear below the image if one is required.
map	The name of the location map to be displayed. See Map display methods. To use a static image, use |map_image=
map_image	The file name of a static map image to be displayed. To use a location map, use |map=.
map_width	Width to display the map image in pixels. The default and maximum is 284, but usually the map should be much smaller. For example: map_width=200 (not map_width=200px). If a location map template is used the map size might be scaled automatically if no width is specified.
map_alt	Alternative text for the map image, see WP:ALT.
map_caption	Text to be displayed below the map image, if required.
AlternativeMap	Use an alternative map for the location map, where available. For additional information, see Template:Location map#AlternativeMap parameter.
relief	When the geographical coordinates method is used (see Map display methods), any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
label	A text message that will be displayed next to the marker. Works with label_position below.
label_position	Specifies the position of a label with respect to the marker. This is not functional when using the XY method for map display. It must be assigned a value or no label will not display. Valid values are left, right, top and bottom. See label above.
mark	The image to use for the marker. The default is Red pog.svg, unless map=us locator blank.svg in which case the default is Green pog.svg. See Template:Location map for more information.
marker_size	The display width of the marker image in pixels. The default value is 8.
mapframe	Add a {{infobox mapframe}} map. See the documentation below in #Mapframe maps for more details on usage.
location	The location of the protected area. Don't be too precise. County, state and country are good in the USA. If the area is within a city specify the city, state and country. If the area is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
nearest_city nearest_town	Recommended if the area is not within a city or town. It could be a city with a major airport or a large gateway town where supplies and lodging are available. Use the most appropriate parameter.
coordinates coords	For the {{coord}} template. The parameters |format=dms and |display=inline,title are recommended. Its coordinates can be used with the location map. (Unless a value for type: is provided, the template will automatically use type:landmark, or something that is set as geohack-type. See the {{Coord}} page for more info.)
coords_ref	Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using <ref>...</ref> tags.
geohack-type	Set the geohack type parameter for use with coordinates and mapframes. Defaults to 'landmark'. See Template:Coord#type:T for more information.
length	Length of protected area, e.g., length of a trail. The {{Convert}} template should be used.
length_km length_mi	Length of protected area, with automatic conversion to metric/imperial units.
width	Width of protected area. Can be used with |length= to describe rough shape. The {{Convert}} template should be used.
width_km width_mi	Width of protected area, with automatic conversion to metric/imperial units.
area	Area of the protected area. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{Convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
area_km2 area_sqmi area_acre area_ha	Area of the protected area, with automatic conversion to metric/imperial units. Preferred to using bare |area=
area_ref	Reference to reliable source for area value.
elevation	Elevation of the protected area.
dimensions	Dimensions of the protected area.
designation	The legal protection offered to the park.
authorized created designated established	The date the protected area was created. See below. Use {{Start date}}. For example, for Yosemite National Park, use {{Start date|1890|10|1}}.
disestablished	The date when the area became no longer protected, if any.
named_for
visitation_num	The number of visitors in a recent year if known.
visitation_year	The year during which the number of visitors was counted.
visitation_ref	Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using <ref>...</ref> tags.
governing_body administrator operator owner	The agency or organization which controls or owns the protected area. See below.
world_heritage_site	The year the protected area was designated a World Heritage Site. Few areas have this designation. If the article uses {{Infobox World Heritage Site}} then this parameter should not be used.
website url	The full URL of the official website with no formatting. For example: http://www.example.org/. Use |website= to display it with the label "Website" or use |url= to display it with no label.
child	Set to "yes" if this infobox is embedded inside another infobox.
embedded embedded1	Another infobox to place within this infobox. It will show up at the bottom. It needs to have its "embed" or "child" parameter set to 1 or yes, as appropriate.
embedded2	A second embedded infobox.

Alternate parameters

A few cells allow alternate parameter names which can be used to generate an appropriate label. Editors should probably not be overly concerned with using the correct label unless using the wrong label would be a blatant error.

Authorized	authorized

Created	created

Designated	designated

Established	established

Protected areas are often created as the result of a governmental procedure. For example, in the United States, national parks are established by an act of congress, National Monuments are usually created by presidential proclamation, and wilderness areas are designated by an act of congress. National Park Service Affiliated Areas are authorized.

authorized → Authorized

created → Created

designated → Designated

established → Established

Governing body	governing_body

Administrator	administrator

Operator	operator

Owner	owner

Some areas are privately owned, and it might be inappropriate to use the label Governing body. For example, the Aleutian World War II National Historic Area is affiliated with the National Park Service but is owned by the Ounalashka Corporation. Chimney Rock National Historic Site is operated by the Nebraska State Historical Society.

governing_body → Governing body

administrator → Administrator

operator → Operator

owner → Owner

Website	website

url

The website can be displayed with or without a label.

website → Website

url → (no label)

IUCN Categories

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the IUCN protected area categories article. If you cannot find the correct code in a reliable source, leave blank.

IUCN category Ia (strict nature reserve)

IUCN category Ib (wilderness area)

IUCN category II (national park)

IUCN category III (natural monument or feature)

IUCN category IV (habitat/species management area)

IUCN category V (protected landscape/seascape)

IUCN category VI (protected area with sustainable use of natural resources)

Mapframe maps

• Basic parameters:
  • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: Enabled (onByDefault) if none of the other map parameters are present: |map=, |image_map=, |map_image=
  • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
  • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
  • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
  • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
  • mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
• Customise which features are displayed:
  • mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
  • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
  • mapframe-line – Turn off display of line feature by setting to none. Default: not specified
  • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country (P17), P131 for located in the administrative territorial entity (P131)). Default: not specified
  • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
    • auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
    • geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
    • zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
• Other optional parameters:
  • mapframe-frame-width or mapframe-width – Frame width. Default: 270
  • mapframe-frame-height or mapframe-height – Frame height. Default: 200
  • mapframe-shape-fill – Color used to fill shape features. Default: #606060
  • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
  • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
  • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
  • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: natural
    • Can also be set to blank to override any default marker symbol
  • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
  • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
  • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
  • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
  • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
  • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: Determined using {{map zoom}} based on any of the parameters: |geohack-type=, |area_sqmi=, |area_km2=, |area_ha=, |area_acre=, |length_km=, |length_mi=, |width_km=, |width_mi=
  • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
  • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Examples

With map only

Ku-ring-gai Chase National Park
IUCN category II (national park)
Location	New South Wales, Australia
Nearest city	Sydney
Coordinates	33°39′3.6″S 151°12′3.6″E
Area	154 km2 (59 sq mi)
Established	October 1, 1967 (1967-10-01)
Visitors	2 million (in 2001)
Governing body	NSW National Parks & Wildlife Service

{{Infobox protected area
| name = Ku-ring-gai Chase National Park
| iucn_category = II
| map = Australia
| relief = yes
| map_width = 200
| map_alt = A map showing the location of the park on the east coast of Australia
| location = [[New South Wales]], Australia
| nearest_city = [[Sydney]]
| coordinates = {{coord|33|39|3.6|S|151|12|3.6|E|region:AU|display=inline}}
| area_km2 = 154
| established = {{start date|1967|10|1}}
| visitation_num = 2 million
| visitation_year = 2001
| governing_body = [[NSW National Parks & Wildlife Service]]
}}

With photograph only

Yosemite National Park
IUCN category II (national park)
Yosemite Valley from Tunnel View
Location	California, United States
Nearest city	Mariposa
Coordinates	37°43′44″N 119°35′54″W
Area	761,266 acres (3,080.73 km2)
Established	October 1, 1890 (1890-10-01)
Visitors	3,280,911 (in 2004)
Governing body	National Park Service
World Heritage site	1984
www.nps.gov/yose/

{{Infobox protected area
| name = Yosemite National Park
| iucn_category = II
| photo = Tunnel View, Yosemite Valley, Yosemite NP - Diliff.jpg
| photo_alt = Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
| photo_caption = Yosemite Valley from Tunnel View
| location = [[California]], United States
| nearest_city = [[Mariposa, California|Mariposa]]
| coordinates={{coord|37|43|44|N|119|35|54|W|display = inline <!-- for documentation page only - not general practice -->}}
| scale = 300000
| area_acre = 761266
| established = {{start date|1890|10|1}}
| visitation_num = 3,280,911
| visitation_year = 2004
| governing_body = [[National Park Service]]
| world_heritage_site = 1984
| url = http://www.nps.gov/yose/
}}

With no photograph or map

Harz National Park
Nationalparkverwaltung Harz
IUCN category II (national park)
Location	Lower Saxony and Saxony-Anhalt, Germany
Coordinates	51°47′00″N 10°34′00″E
Area	8,900 ha (34 sq mi)
Established	1990, 1994, 2006
Governing body	Nationalparkverwaltung Harz

{{Infobox protected area
| name            = Harz National Park
| alt_name        = ''Nationalparkverwaltung Harz''
| iucn_category   = II
| location        = [[Lower Saxony]] and [[Saxony-Anhalt]], Germany
| nearest_city    = 
| coordinates     = {{coord|51|47|00|N|10|34|00|E|region:DE_type:landmark|display=inline}}
| area_ha         = 8900
| established     = 1990, 1994, 2006
| visitation_num  = 
| visitation_year = 
| governing_body  = Nationalparkverwaltung Harz
}}

With photograph and map

Dry Island Buffalo Jump Provincial Park
IUCN category III (natural monument or feature)
Panoramic view
Map of Alberta, Canada
Location	Alberta, Canada
Nearest city	Three Hills
Coordinates	51°56′10″N 112°57′41″W
Area	34.5 km2 (13.3 sq mi)
Established	December 15, 1970 (1970-12-15)
Governing body	Alberta Tourism, Parks and Recreation

{{Infobox protected area
| name = Dry Island Buffalo Jump Provincial Park
| photo = Dry Island Provincial Park2.jpg
| photo_alt = A green valley with a river and a road running somewhat parallel to the river
| photo_caption = Panoramic view
| photo_width = 260
| iucn_category = III
| map = Canada Alberta
| map_alt = Location the park in south central Alberta, Canada
| map_caption = Map of Alberta, Canada
| relief = yes 
| map_width = 200
| location = [[Alberta]], Canada
| nearest_city = [[Three Hills, Alberta|Three Hills]]
| coordinates     = {{coord|51|56|10|N|112|57|41|W| display = inline <!-- for documentation page only - not general practice -->}}
| coords_ref = 
| area_km2 = 34.5
| established = {{start date|1970|12|15}}
| governing_body = [[Alberta Tourism, Parks and Recreation]]
}}

With embedded alternate map

Black Forest National Park
IUCN category II (national park)
Location of the Black Forest National Park in the northwestern Black Forest
Location	Baden-Württemberg, Germany
Coordinates	48°33′40″N 8°13′17″E
class=notpageimage| Black Forest National Park in the southwest of the map

{{Infobox protected area
| name = Black Forest National Park
| iucn_category = II
| image_map = Nationalpark-Schwarzwald-Lageplan.png
| map_alt = 
| map_caption = Location of the Black Forest National Park in the northwestern Black Forest
| relief =
| location = [[Baden-Württemberg]], Germany
| coordinates     = {{coord|48|33|40|N|8|13|17|E| display = inline <!-- for documentation page only - not general practice -->}}
| embedded = {{Location map | Germany
 | AlternativeMap = Karte Nationalparks Deutschland high.png
 | caption = Black Forest National Park in the southwest of the map
 | coordinates     = {{coord|48|33|40|N|8|13|17|E}} 
 | border = none
 | width = 300
 }}
}}

Map display methods

Any image of a map showing the location of the protected area can be used.

Display a marker on a map using a template and geographic coordinates

A marker can be superimposed on a map using one of a set of special map templates. To display a marker, the geographic coordinates must be specified using the {{Coord}} template inside the |coordinates= parameter. See the documentation for {{Location map}}. The parameters for this template map to a subset of the parameters used by {{Location map}}. A map template can be found using these sources:

List of templates – Many of the listed items are redirects and a few templates may not function as expected.

Category:Location map templates - templates sorted by category.

Special:WhatLinksHere/Template:Location map/Info – a search that might help.

Special:PrefixIndex/Module:Location map/data/ – another search that might help.

Special:Prefixindex/Template:Location map – another search that might help.

All of the names begin with the words "Location map" followed by the area covered. The value you need to specify is the area name. The map template for Canada is Location map/data/Canada. In this case specify |map=Canada.

Four Corners, Canada
Example using geographic coordinates
Coordinates	60°N 102°W

{{Infobox protected area
| name = Four Corners, Canada
| map = Canada
| map_caption = Example using geographic coordinates
| coordinates = {{coord|60|N|102|W|display=inline <!-- for documentation page only - not general practice --> }}
}}

By default, {{Coord}} displays in the infobox only in the page title. Parameter |display=inline,title can be added to make the coordinates display at the top of the page as well.

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:Infobox protected area in articles based on its TemplateData. TemplateData for Infobox protected area No description. Template parameters This template prefers block formatting of parameters. Parameter Description Type Status Name name Name of protected area String required Alternative Name alt_name Common name for the protected area String optional IUCN Category iucn_category IUCN Category associated with the protected area String optional Logo logo The logo of the protected area File optional Logo alt logo_alt The alt text for the logo String optional Logo upright logo_upright The upright value for the logo Example 1.2 Number optional Logo caption logo_caption The caption that goes beneath the logo String optional Photo photo Image for the protected area Page name optional Photo Width photo_width Width of the image given by photo Number optional Photo Alternative Text photo_alt Alternative text to be displayed if image doesn't appear for any reason String optional Photo Caption photo_caption Caption for the photo String optional Map map Location map for the protected area Page name optional Map image map_image Map image for the protected area Page name optional Map Alternative Text map_alt Alternative text to display if the map doesn't display for whatever reasons String optional Map Caption map_caption Caption for the map String optional Map Width map_width Width of the map Number optional Relief relief When the geographical coordinates method is used, any non-blank value will cause the template to display a relief map image String optional Show mapframe map mapframe Specify yes or no to show or hide the map, overriding the default Default no Example yes String suggested Mapframe caption mapframe-caption Caption for the map. If mapframe-geomask is set, then the default is "Location in <<geomask's label>>" String optional Custom mapframe mapframe-custom Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored. Template optional Mapframe Wikidata item mapframe-id id qid Id (Q-number) of Wikidata item to use. Default (item for current page) String optional Mapframe coordinates mapframe-coordinates mapframe-coord coordinates coord Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template. Default (coordinates from Wikidata) Example {{Coord|12.34|N|56.78|E}} Template optional Mapframe shapes from Wikidata mapframe-wikidata et to yes to show shape/line features from the wikidata item, if any, when coordinates are specified by parameter Example yes String optional Mapframe point feature mapframe-point Override display of mapframe point feature. Turn off display of point feature by setting to "none". Force point marker to be displayed by setting to "on" String optional Mapframe shape feature mapframe-shape Override display of mapframe shape feature. Turn off by setting to "none". Use an inverse shape (geomask) instead of a regular shape by setting to "inverse" String optional Mapframe width mapframe-frame-width mapframe-width Frame width in pixels Default 270 Number optional Mapframe height mapframe-frame-height mapframe-height Frame height in pixels Default 200 Number optional Mapframe shape fill mapframe-shape-fill Color used to fill shape features Default #606060 String optional Mapframe shape fill opacity mapframe-shape-fill-opacity Opacity level of shape fill, a number between 0 and 1 Default 0.5 Number optional Mapframe stroke color mapframe-stroke-color mapframe-stroke-colour Color of line features, and outlines of shape features Default #ff0000 String optional Mapframe stroke width mapframe-stroke-width Width of line features, and outlines of shape features Default 5 Number optional Mapframe marker mapframe-marker Marker symbol to use for coordinates; see [[mw:Help:Extension:Kartographer/Icons]] for options Example museum String optional Mapframe marker color mapframe-marker-color mapframe-marker-colour Background color for the marker Default #5E74F3 String optional Mapframe geomask mapframe-geomask Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity) Example Q100 Page name optional Mapframe geomask stroke color mapframe-geomask-stroke-color mapframe-geomask-stroke-colour Color of outline of geomask shape Default #555555 String optional Mapframe geomask stroke width mapframe-geomask-stroke-width Width of outline of geomask shape Default 2 Number optional Mapframe geomask fill mapframe-geomask-fill Color used to fill outside geomask features Default #606060 String optional Mapframe geomask fill opacity mapframe-geomask-fill-opacity Opacity level of fill outside geomask features, a number between 0 and 1 Default 0.5 Number optional Mapframe zoom mapframe-zoom Set the zoom level, from "1" to "18", to used if the zoom level cannot be determined automatically from object length or area Default 10 Example 12 Number optional Mapframe length (km) mapframe-length_km Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area Number optional Mapframe length (mi) mapframe-length_mi Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area Number optional Mapframe area (km^2) mapframe-area_km2 Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area Number optional Mapframe area (mi^2) mapframe-area_mi2 Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area Number optional Mapframe frame coordinates mapframe-frame-coordinates mapframe-frame-coord Alternate latitude and longitude coordinates for initial placement of map, using {{coord}} Example {{Coord|12.35|N|56.71|E}} Template optional Mapframe switcher mapframe-switcher Set to "auto" or "geomasks" or "zooms" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average. String optional mapframe-line mapframe-line no description Unknown optional Location location Location of the protected area String optional Nearest city or town nearest_city nearest_town Nearest city from the protected area String optional Coordinates coordinates coords When this option is used the type, region, scale, source, format and display parameters are not functional but this data can be entered in the {{Coord}} template. String optional Coordinates Reference coords_ref Can be used with either coordinate display method above String optional Length length Length of protected area Number optional Width width Width of protected area Number optional Area area Area covered by protected area Number optional Established established authorized created designated The date on which the protected area was established, authorized, created, or designated Line optional Disestablished disestablished The date on which the protected area became no longer protected Line optional Visitation Number visitation_num Number of visitors in a recent year Line optional Visitation Year visitation_year The year in which visitors were counted Line optional Visitation Reference visitation_ref Reference of visitation data in <ref > </ref> String optional Governing Body governing_body administrator operator owner The agency or organization which controls or owns the protected area String optional World Heritage Site world_heritage_site The year the protected area was designated a World Heritage Site Line optional Website website url The full URL of the official website with no formatting String optional Child child Yes if infobox is embedded inside another infobox String optional Embedded 1 embedded embedded1 Another infobox to place within this infobox String optional Embedded 2 embedded2 Another infobox to place within this infobox String optional elevation elevation no description Unknown optional elevation_avg elevation_avg no description Unknown optional elevation_min elevation_min no description Unknown optional elevation_max elevation_max no description Unknown optional

Microformat

The articles created using this template include an hCard microformat. For more information read this.

Tracking categories

• Category:Pages using infobox protected area with unknown parameters (6)

See also

• {{Infobox park}}