Talk:SPARC/Archives/2012
![]() | This is an archive of past discussions. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page. |
Inaccurate, false, incomplete
1. The article doesn't distinguish between an instruction set architecture and a particular implementation of the architecture. SPARC is an ISA specification. and UltraSPARCs are particular implementations. You can design and manufacture SPARC compatible processors, but you can't do that with x86. That's why SPARC is called open.
- Please explain. AMD makes x86 compatible chips. What is it you're saying?—Preceding unsigned comment added by 64.165.203.115 (talk • contribs) 01:58, January 24, 2005
- I think it means that with SPARC there's no need for sneakiness, no reverse-engineering, no Silicon Valley virginity test. - Robert X. Cringely—Preceding unsigned comment added by 69.113.104.47 (talk • contribs) 07:47, October 10, 2005
- I think it is that I, as an individual or small company, can go to SPARC International and pay for a license for the SPARC. There exists no agency to approach for such a license for x86. In addition, SPARC's licensing terms are incredibly open, not requiring big patent payoffs such as with MIPS or ARM. Downix —Preceding unsigned comment added by 65.169.195.238 (talk) 11:13, 25 August 2008 (UTC)
- There is no doubt that SPARC is an open instruction set architecture. The "price" of the SPARC instruction set architecture specification is for covering the cost of redistributing the material, not for the licensing of. Also, consider the fact that Intel tried very hard back in the day to stop other companies from developing x86 compatible implementations. As far as I know, Sun never went after other companies making SPARC implementations and back in the late 1980s and early 1990s, there were quite a few companies in the business of SPARC microprocessors. The mere fact that AMD makes x86 compatible processors is not an indication that x86 is open. Rilak (talk) 11:24, 25 August 2008 (UTC)
2. It's ridiculous to imply that the original design favored register window *instead of* pipelining since the first SPARC was pipelined. Ever wondered why the delay slot was invented in the first place ? To fill the pipeline bubble after the branch in the early RISC designs.
3. UltraSPARC series are not a "standard" but just particular implementations.
4. In v9, there are 32 double precision (64bit) floating point registers
- and half of them (16) can be used as 32 single precision floating point registers. These 32 double precision registers can be used as 16 quad precision registers also.—Preceding unsigned comment added by 34.244.154.182 (talk • contribs) 02:24September 10, 2004
5. There's 8 global registers which are always available but no mention of it - the article implies there's only 24 general purpose registers available.
6. If a delay slot makes coding awkward, try hand-coding IA-64.
7. The article was apparently written by some open source zealot, but obviously the zealot had no clue on processors like Leon which is a particular implementation of SPARC and is open source (as the core design VHDL is under GPL). Have you ever seen an x86 design under GPL ? No, since that's impossible unless Intel allows. That's why SPARC is an open architecture.
I'll try to write a fair and accurate article on SPARC if I have some time, but if there's anybody with enough time to do so, take a look at http://www3.sk.sympatico.ca/jbayko/cpu.html before writing anything to get some clue. —Preceding unsigned comment added by 192.18.42.10 (talk • contribs) 16:30, April 8, 2004
http://www3.sk.sympatico.ca/jbayko/cpu.html dead link
What are you getting at in #6 ?—Preceding unsigned comment added by 64.165.203.115 (talk • contribs) 01:55, January 24, 2005
link active as of 20050812: http://www.sasktelwebsite.net/jbayko/cpu.html—Preceding unsigned comment added by 209.220.128.245 (talk • contribs) 18:51, August 12, 2005
Solaris "designed for SPARC" ?
Is Solaris really "designed for SPARC"? Or what did the old 68000-based Sun3 machines run?—Preceding unsigned comment added by Krille (talk • contribs) 05:23, April 29, 2005
- sun1, sun2, sun3, sun4, sun3x, sun4c and early sun4m machines shipped with SunOS witch was based on BSD UNIX.—Preceding unsigned comment added by 69.237.78.106 (talk • contribs) 08:03, August 21, 2005
Ross Technology
There's no mention of Ross Technology, which made the HyperSPARC processors and closed in 1998 [1]. However, I'm unclear on whether they would have actually licensed SPARC from SPARC International, so I'm not sure how to add this. StuartBrady 15:37, 12 January 2006 (UTC)
- Ross were spun off from Cypress, who were the builders of the first full-custom SPARC processors (the 7C601, or whatever the number was), and who were "licensed" for SPARC before SI existed; presumably they inherited whatever "license" they had from Cypress. Guy Harris 18:37, 12 January 2006 (UTC)
Tagged Instructions
Currently, the last paragraph under SPARC#Features is slightly incorrect.
- Tagged add and subtract instructions perform adds and subtracts on values assuming that the bottom two bits do not participate in the computation. This can be useful in the implementation of the run time for ML, Lisp, and similar languages that might use a tagged integer format.
The tagged instructions were added for the sake of Smalltalk, Lisp and other dynamically-typed languages, but Urs Hölzle and David Ungar report little benefit, at least for the Self programming language (see Do object-oriented languages need special hardware support?, ECOOP 1995). So I suggest changing the second sentence to (say)
- They were added for the sake of dynamically-typed languages such as Smalltalk, Lisp and ML that might use a tagged integer format.
If anyone can point to a system which does gain some real benefit from those instructions, I'd love to know about it. (When I first read about TADDcc and TSUBcc, I thought they were a wonderful idea. When I read that paper I was quite suprised. It would greatly please me to find about that TADDcc & TSUBcc are useful after all.)
Table of Processors
The table which shows details about the SPACR Processor is quite unreadable, is there any tutorial which tell me to add another headings in the row so that it could be quite readable ?—Preceding unsigned comment added by Mmansoor (talk • contribs) 23:19, May 4, 2006
SPARC64 is not T1
Sparc64 is not the T1 (Niagara) as implied by the article. —The preceding unsigned comment was added by 12.35.167.242 (talk • contribs) 11:26, 5 May 2006 (UTC).
- Where does the current version of the article (after my changes to make the article no longer refer to SPARC64 as "the latest multi-core processor of Sun") imply that? Guy Harris 18:59, 5 May 2006 (UTC)
- Well, it still said "It has eight cores with a clock speed of 1.2 GHz per core. Each core is capable of running four threads simultaneously." That's true of the UltraSPARC T1, but not of any SPARC64 processor, as far as I can tell. I've removed that sentence for now. --StuartBrady 23:14, 5 May 2006 (UTC)
Multi-core/multi-thread SPARC64
The slide show from October 2005 at http://primeserver.fujitsu.com/primepower/event/report/pf-2005/pdf/mpf2005scr.pdf says that SPARC64 VI is intended to be dual-core with each core supporting two "strands". It doesn't indicate that any current SPARC64 is either multi-core or multi-threaded. Guy Harris 21:18, 5 May 2006 (UTC)
ERC32
The article barely mentions SPARC V7 revision, in which the ERC32 processor is based on.—Preceding unsigned comment added by MLange (talk • contribs) 09:32, June 25, 2006
Superscalar/In-order, etc ?
The article doesn't even mention wether versions of Sparc are superscalar, our of order, in order, how wide, etc. I'd say that this is at least as important and interesting (if not more) as cache size.—Preceding unsigned comment added by 67.188.167.73 (talk • contribs) 12:09, October 25, 2006
- How wide is said by the revision (SPARC v7 + v8 are 32-bit, v9 is 64-bit). —Preceding unsigned comment added by 65.169.195.238 (talk) 14:58, 18 September 2008 (UTC)
SPARCLite?
What is SPARCLite? My Fujitsu MB86833 66MHz that lives inside of my laser appears to be one, judging from http://www.fujitsu.com/downloads/MICRO/fmal/gdc/DS-MB86291-e4311021.pdf, page 5. From http://www.sparc.org/chips.shtml, I see that it is V8 arch. Thanks. - MSTCrow 15:32, 11 February 2007 (UTC)
"UA" and "JPS1" ?
These appear as modifiers to V9 under "Architecture Version" in the specifications table. The positioning implies that "JPS1" is specific to SPARC64, and "UA" to CMT processors—but what are they? This would seem like a worthy addition to the article.
On a related subject, especially since there seem to be a flurry of recent edits around it: should the table show what version of VIS is present (if any) for each processor?--NapoliRoma (talk) 17:58, 12 December 2007 (UTC)
Categorization?
This article is currently a part of "Category:Lists of microprocessors", but it is not a "List of..."-type article, which is what all entries (except for this one) in the category contains. Should this article be removed from this category? Rilak (talk) 13:04, 25 October 2008 (UTC)
- Well spotted! Yes, this doesn't belong in that category. Letdorf (talk) 16:20, 25 October 2008 (UTC).
- I have fixed it. Rilak (talk) 04:07, 26 October 2008 (UTC)
SPARC64 III
I have a HAL document (SPARC64 III Product Overview, 29 April 1999) which says, "SPARC64 III (also called SPARC64 GP)..." (Emphasis mine). The table in this article describes the SPARC64 GP as a 0.18 micron microprocessor, whereas the HAL document claims that the two names refers to the same design - a 0.25 micron chip. Am I missing something? Rilak (talk) 03:36, 10 March 2009 (UTC)
SPARC clones
Hello, I have been looking on informations about various sparc vendors other than SUN, and the list of clones found at http://openbsd.org/sparc.html, for exemple, does not appear to be mentioned somewhere on wikipedia. Can anyone write something about it ? Is it worthwhile to include them in the History section ? Thank you, Comte0 (talk) 14:42, 21 July 2010 (UTC)
- More generally, maybe there should be a "SPARC-based systems" section, like in the DEC Alpha article (but hopefully with more citations), mentioning Sun, Solbourne, Tadpole, RDI, SPARCstation clone vendors, Cray (CS6400), Meiko etc? Letdorf (talk) 22:33, 21 July 2010 (UTC).
- I think we need to discuss the relevance of including information about vendors of systems using SPARC uPs in an article about the SPARC ISA. It concerns me that articles about ISAs are more about the implementations of the ISA, and where those implementations have been used, than the ISA itself. We need to consider just what constitutes as an ISA's history. In my view, the history of an ISA involves discussing the various versions of the ISA and what CPUs have implemented the ISA. I think it is irrelevant to have any more information than this. Usage of specific CPUs by vendors of note (to minimize cruft—look at ARM architecture for an example of where-ARM-has-been-used cruft) should be in an article about the relevant CPU, not the ISA—a system does not "use" an ISA, it uses a CPU that implements an ISA. Putting information about who used specific SPARC uPs in the articles about those uPs is possible, since Wikipedia has articles about most SPARC uPs. What do you guys think? Rilak (talk) 06:44, 22 July 2010 (UTC)
- The ARM architecture article says :
- The ARM is a 32-bit reduced instruction set computer (RISC) instruction set architecture (ISA) developed by ARM Holdings.
- This article says:
- SPARC is a registered trademark of SPARC International, Inc., an organization established in 1989 to promote the SPARC architecture and to provide conformance testing.
- The ARM architecture article says :
- I thought about creating a SPARC clones article, but at the very least, an article SPARC International, Inc. is needed. Regards, Comte0 (talk) 06:59, 28 July 2010 (UTC)
"SPARC"
FYI, the usage of the title "SPARC" is under discussion at Talk:SPARC (disambiguation) -- 70.24.247.127 (talk) 22:28, 18 December 2012 (UTC)