Talk:Hot tub

This is the talk page for discussing improvements to the Hot tub article.
This is not a forum for general discussion of the article's subject.

Put new text under old text. Click here to start a new topic.
New to Wikipedia? Welcome! Learn to edit; get help.

Article policies

Find sources: Google (books · news · scholar · free images · WP refs) · FENS · JSTOR · TWL

Untitled

Would a hot tub be able to function in space? Would centrifugal force be enough or would the lessened gravity be a problem with the bubbles? 67.53.75.42 17:50, 16 February 2006 (UTC)[reply]

A hot tub would not function in a zero-G environment. But as you know, artificial gravity caused by acceleration (including so-called centrifugal force) is indistinguishable from real gravity, so a hot tub on a 2001-like centrifuge (and in normal atmospheric pressure) would work fine. Well, so long as the diameter of the centrifuge were large enough to not noticeably curve the surface of the water; that is, the surface of the water would conform to the local curvature of the centrifuge so if the centrifuge curved "up" several inches in the width of the hot tub, so would the water!

HAL, more bubbles, please!

Atlant 18:03, 16 February 2006 (UTC)[reply]

Hot, hot, hot, but how hot?

Not one mention of how hot the water typically is in a hot tub? Maybe a range? —Preceding unsigned comment added by 69.137.99.1 (talk) 00:50, 21 June 2008 (UTC)[reply]

I have a hot tub at 104 F. This is hot but does not burn by any means and it considered ideal. 102 is much safer, but obv not as hot. 102 is more like a warm bath. 104 is more like WOW thats hot (but feels good at the same time). Tdinatale (talk) 00:58, 29 August 2009 (UTC)[reply]

That's about 38c to anyone who's not American. Can we use Celsius measurements for temperature please because every country in the world except for the USA, Canada and Burma use this system whereas Fahrenheit is barely used except in the US, Canada and by old biddies in the UK. Similarly all measurements given in English Wikipedia should use metric units for the same reason. Or maybe your hot tub really is 104 but if that were the case I doubt you'd be living.--Xania

^talk 00:26, 4 January 2010 (UTC)[reply]

In Canada and the United States since 1980 the maximum temperature for a hot tub/spa is 40C/104F.^[1] Most people set it to the maximum and historically higher temperatures were the norm. 40C/104F gives an initial feeling of being very warm or hot but after a couple minutes just feels like a nice bath temperature. Natural hot springs can be significantly higher and people enjoy them at 50C/122F ^[2] or more but this temperature is definitely very hot when you get in and stays feeling hot. Temperatures over 41C/106F have been demonstrated to increase your risk of stroke ^[3]which is why the maximum is 40C/104F. — Preceding unsigned comment added by Madmanpierre (talk • contribs) 23:31, 15 March 2012 (UTC)[reply]

Interesting, since the temperature causes vasodilation, hence would lower blood pressure.Wzrd1 (talk) 12:06, 4 October 2013 (UTC)[reply]

Info on Temperature

It seems the current temp limit is 104F (40C) as it shows up in multiple owners guides. I believe it is a law but could not track it down. I did find some earlier info on settings which said in essence that if the temp control is manually set above 104 it must automaticlly revert to 104 when turned off. The following NSF standard is 4 years old. Some diligent researcher will surely run down a later version.

Page 1 of 9 This document is the property of NSF International (NSF) and is for NSF Committee purpose(s) only. Unless given prior approval from NSF, it shall not be reproduced, circulated, or quoted, in whole or in part, outside of NSF.

NSF/ANSI 50

Equipment for Swimming Pools, Spas, Hot Tubs and other Recreational Water Facilities

19.9 Temperature control systems

19.9.1 Temperature control

Each spa shall have a temperature-regulating control that is in conformance with ANSI/UL 1563 Standard for Electric Hot Tubs, Spas, and Associated Equipment, including requirements for:

− Maximum set point corresponding to a water temperature of 40 ° C (104° F) in the tub; and − Tolerance at the maximum temperature setting of not more than ± 3 ° C (± 5 ° F).

19.9.2 Temperature limits

Each spa shall have a temperature-limiting control that is in conformance with ANSI/UL 1563 Standard for Electric Hot Tubs, Spas, and Associated Equipment, including requirements for:

− Limiting the water at the inlet to the tub to a maximum temperature of 50 ° C (122 ° F); and − Tolerance at the maximum temperature setting of not more than ± 3 ° C (± 5 °F).

19.9.3 Temperature display

Each spa shall have a display in one degree increments (Fahrenheit or Celsius) reflecting the spa water temperature. This display shall be located on the top surface or side of the spa and shall be readily visible to persons prior to entry.

19.9.4 Heater

The heater shall be stable and stationary after plumbing and electrical connections are completed. The minimum clearances to combustible materials, as specified by the heater manufacturer, shall be maintained. Electric heaters shall meet the requirements of ANSI/UL 1261 Electric Water Heaters for Pools and Tubs. MisterHOP (talk) 07:09, 4 October 2013 (UTC)[reply]

References

bathtubs

I don't think a bathtub should be included in the definition of a hot tub. I think what defines a hot tub is that it may be kept hot for an extended period of time, through many uses.

A home bathtub, even if it has a jet, is not a hot tub because it lacks both sanitizing capability, as well as heating ability. Building codes have separate regulations for bath tubs with jets (hydrotherapy), and pool/spa building requirements. Pro crast in a tor 19:03, 27 June 2006 (UTC)[reply]

introductory paragraph

I removed the references to reading and meditation, as I think they fall under the term "relaxation". The first paragraph should be short and to the point, and having 6 usage entries seems too long. Pro crast in a tor 19:38, 27 June 2006 (UTC)[reply]

"According to Lucite International, of the 130-odd manufacturers in North America, in 2005 the top twenty each produced more than 7,000 spas annually.[citation needed]"

I don't know how to put in the citation for this more accurate material:

Chrisanti, John, 2005 Spa Industry Analysis. Sun Valley, CA: Lucite International, Feb. 23, 2005, p. 17.

--Greybeard2ca 15:27, 31 July 2007 (UTC)[reply]

Media attention

Not sure of the template, but this article was referenced in the Times (of London) today. Skittle 10:43, 12 September 2006 (UTC)[reply]

You may want to put a link at Wikipedia:Press coverage.

Atlant 13:35, 12 September 2006 (UTC)[reply]

For anyone interested, the article is at http://www.timesonline.co.uk/article/0,,20910-2353078.html Pro crast in a tor 04:35, 15 September 2006 (UTC)[reply]

Thanks! As the author of that lede sentence, I guess I'm now sort of hemi-demi-semi-famous, ehh? ;-)

Atlant 17:49, 15 September 2006 (UTC)[reply]

Hey, it's collaborative editing, as I know I touched that line, too. :) It's certainly a good sign that the page is worth citing. Nice job, everyone! Pro crast in a tor 18:51, 19 September 2006 (UTC)[reply]

"Barkeep, drinks all around!" ;-)

Atlant 19:17, 19 September 2006 (UTC)[reply]

Heights

"They are almost always shallower than wooden tubs, being less than 32" high so they will fit through a standard United States doorway."

This is no longer true; most current models are 36", 38", or even deeper. Tom G, Communications Officer, Arctic Spas.

Thanks Tom G, duly noted in the article. Pro crast in a tor 16:51, 19 December 2006 (UTC)[reply]

Generic Brands

I am unable to document the use of arctic spa as a generic brand in the UK, though I have found jacuzzi. I have removed that part until I can cite a reference. It was suggested to me that the other brand names be removed as well. ArcticSpasCO 22:51, 20 December 2006 (UTC)[reply]

Agreed, I removed the reference to Jacuzzi. Seems a bit outdated now, rather like how people talk about the copy machine rather than the Xerox machine nowadays. Also, ArcticSpasCO, your most recent edit to this article was marked "minor", but it was not a minor edit. Please review the wikipedia policy on minor editing at http://wiki.riteme.site/wiki/Help:Minor_edit , it should only be used for superficial things like punctuation, spelling, and the like. Thanks! Pro crast in a tor 03:30, 21 December 2006 (UTC)[reply]

Both Jacuzzi and Whirlpool are still there!? Can't figure out how to see in the history just what I edited, but I've checked the minor edit policy and will take note of that for the future.Greybeard2ca 20:26, 10 January 2007 (UTC)[reply]

Hi Greybeard2ca, there was a separate mention about Jacuzzi in the article. To view the change, go to the main article, click on the "history" tab, then compare the last two versions to see what change I made. Best, Pro crast in a tor 16:37, 12 January 2007 (UTC)[reply]

External links to the hot tub rotomoulding site (and more generally, corporate sites)

Hi [User:81.77.109.247|81.77.109.247], there's no requirement for supporting evidence that rotomoulding is, in fact, used in the manufacturing of hot tubs as this is not a contentious issue (see WP:REF), so there's no need for the reference. Though the site is interesting, it is too much like an ad, with the most egregious sentence being "It is only then that the tub is worthy of a laser cut HotTubs2Buy plaque, wrapped in a protective plastic cover and delivered to the customer in perfect working order." Egads, that's marketing-speak, and has no place as a link from wikipedia.

If there is a similar page that discussed the equipment but didn't have the marketing speak, I'd be all for adding in the link. But, as the link is, I think that it should not be linked to. There's also an interesting link I found about acrylic vacuum forming of bathtubs, but it, too, was full of marketing speak, so I couldn't link to it, either. Pro crast in a tor 10:05, 2 February 2007 (UTC)[reply]

Pro crast in a tor, forgive me if I am wrong but when you lift infomation from another website it should be sited as your source. I believe although this page contains marketing speak does add value to wikipedia users looking to further investigate the rotational molding process.

Hello [user:84.64.83.165|84.64.83.165], it's not a contentious issue that rotomolding is used for hot tubs, so a citation is not necessary: it's common knowledge. Just type in "rotomolded hot tub" into google, and you'll see a bunch. If the reader want to learn more about rotational molding, they can click on the rotational molding link, which is provided in the text. Again, the marketing speak aka ad of that article makes it unusable as a wikipedia reference: see wp:ref and wp:ads for more on this subject (sorry, I included broken reference before, now fixed)

Also, you can sign your name or IP address by placing four tildes ("~") at the end of your comment, it makes it easier to figure out whom is talking to whom. Thanks. Pro crast in a tor 21:55, 4 February 2007 (UTC)[reply]

Procrast in a tor, the online artical at hot tubs 2 buy has now been edited to exclude marketing speak. Let me know if i have missed any. I do now believe that this merits an external link for anyone looking for further infomation on the construction specifically of rotational molded hot tubs.

Hi [User:84.66.164.45|84.66.164.45], the text is still not that great in my opinion. "Now that the hot tub is visually complete all that is left to do is install the heart, lungs and brain of the hot tub (Pump, Air Blower and Control panel). This is done by a electrical engineer and then tested toughly using state of the art computer testing equipment." Do you really use an EE to do product testing? That seems highly unlikely when you could have an EE set up the system, then pay someone minimum wage to operate the tester. "State of the art" is also marketing-speak, as it means nothing (just think of text written in the 60's using that term). "Thoroughly" is also misspelled (by no less than 3 letters, I might add), and there are a number of other misspellings, too. 5 clicks to read what could be a one-page article. Even with the most egregious marketing-speak removed, it still is not a high quality article, and I don't think it should be linked to.

We also have a conflict of interest, as the goal should not to make a page that's acceptable to wikipedia, and add it to boost your search rankings or sales, but instead, for wikipedia editors to find pages of interest and add it. See WP:COI for more about Wikipedia guidelines on conflict of interest. Personally, if I ran across your article in some fashion, I'd find it interesting, but I don't think it would be noteworthy to most hot tub readers. Combine this with it being a poorly written article, and I'm sure I wouldn't add it.

Anyone else have an opinion on this topic? Pro crast in a tor 11:29, 6 February 2007 (UTC)[reply]

This is one of those topics where essentially all external links are just spam, and ought to be routinely deleted.

Atlant 14:23, 6 February 2007 (UTC)[reply]

Thanks for the feedback, I guess I'm being a bit light where I should be heavy-handed, as it is pretty clearly spam. Pro crast in a tor 00:54, 7 February 2007 (UTC)[reply]

Hmm, looks like the page sprouted a "manufacturers" list, less unsightly than the above but still spam. I removed it: wikipedia is not a directory: WP:NOT#DIR, and the manufacturers list seems to fall under the "links normally to be avoided" list in WP:EL, as well as ads WP:ADS.

Energy Efficiency

"Both the California Energy Commission and National Resources Canada have taken an interest in the energy efficiency of portable spas (late 2006)."

I can obtain online references to the California Energy Commission and both online and print references to the Natural Resources Canada material on energy efficiency of hot tubs if this will be helpful. I'll have to look up how to do the citations...

Barnsley, David, Energy Efficiency Regulations: Reducing Greenhouse Gases. NRCan to include residential hot tubs in Amendment 12. Pool & Spa Marketing, Summer 2007, p. 30

www.energy.ca.gov/appliances/2003rulemaking/documents/case_studies/CASE_Portable_Spa.pdf

The above is the case study the CEC used in deriving their standard.

Navigant Consulting of Washington DC was commissioned by NRCan to perform a similar study using additional data, including the study on Energy Efficiency of Hot Tubs done by the Alberta Research Council, and to focus on Canadian market and weather conditions.

--Greybeard2ca 15:05, 31 July 2007 (UTC)[reply]

Biguanide Sanitizers

Edits need to be made to the Hot Tub page to include Biguanide Sanitizing. Biguanide Sanitizers are not chlorine or bromine based, they fight bacteria by breaking down the cell walls. Anybody with knowledge of this subject should expand on the sanitizing section.

Thanks, Clifsportland (talk) 19:00, 14 December 2007 (UTC)[reply]

History of Jacuzzi

http://www.jacuzzihottubs.com/about/timeline.html Jacuzzi History may help for deleted; The concept of the Hot Tub as we know it today was largely due to the work of Roy Jacuzzi.--Namazu-tron (talk) 09:16, 2 February 2008 (UTC)[reply]

Is there an independent source to support the claim? The brochure on this page is a publicity document for the Jacuzzi brand, so it can't be considered neutral or authoritative. Bonhomie (talk) 14:09, 2 February 2008 (UTC)[reply]

In long long human history, there are many people, who is not called great though, and his/her inventions, it may not considered to be great in general, however, the personal or private museum and/or personal company publications (registered company under law) and their web site displays, describes and demonstrate its stories. As far as it describes its context and his/her name and with or without photo, we should understand or take it without　doubt that it is well evidenced, not only we believe on such information by big well known companies such as http://www.sony.net/SonyInfo/CorporateInfo/History/history.html or http://www.gm.com/corporate/about/history/ but also small companies, unless you have negating evidenced source.--Namazu-tron (talk) 00:24, 3 February 2008 (UTC)[reply]

I'm not saying that the Jacuzzi brochure is lying, of course! The Jacuzzi brochure could be a reasonable source for facts that are relevant to the article, but this claim was an opinion, and something about which reasonable people could disagree: "the concept of the hot tub as we know it today was largely due to the work of Roy Jacuzzi". I don't think this type of statement belongs in an encyclopedia unless it is backed by independent sources. Bonhomie (talk) 01:24, 3 February 2008 (UTC)[reply]

Well. why Don't you polish article because you say, you used to work in hot tab industry. My en-2 is too tough to do it. I hope more active edit Wikipedia. Tks.--Namazu-tron (talk) 02:19, 3 February 2008 (UTC)[reply]

material needed

This article certainly needs material on social aspects, cultural references, and related topics. Not my field, but I hope someone here is interested. DGG (talk) 11:23, 14 September 2008 (UTC)[reply]

There's a bunch of info here: Swimming_pool#Hot_tubs_and_spa_pools

Troubling photo?

Does anybody else find the first photo here--two grown men and a lot of little girls in the hot tub--troubling? It seems to me, there is plenty of illustration in the article without that one picture (and it would surprise me if there weren't plenty more available). So the article wouldn't lose by omitting a questionable photo. 173.79.191.234 (talk) 12:22, 24 January 2012 (UTC)Stephen Kosciesza[reply]

Are you suggesting that families cannot enjoy a hot tub together?Wzrd1 (talk) 16:51, 20 September 2012 (UTC)[reply]

Why do we not assume that the wife took the photo? And the other wife didn't want her picture taken with her hair all frizzy ... MisterHOP (talk) 07:09, 4 October 2013 (UTC)[reply]

Merge request

This article doesn't have a History section. Why is this History_of_the_hot_tub a separate article? I propose a merger. Kortoso (talk)

Supertub 300

Image not found. Please upload it to Wiki commons and reference it from the gallery. Kortoso (talk)

How-to At Bottom of Article

Is not really relevant. Lets get rid of it and then kill that message at the top of the page....unless there are other how-tos on the page that I didn't see. It's just not necessary. If you want that how-to, Google it. Xenosphobos (talk) 16:01, 4 January 2014 (UTC)[reply]

done, anyway that section wasn't about hot tubs but about baths which get new water with each use Cornellier (talk) 17:57, 5 January 2014 (UTC)[reply]

External links modified

Hello fellow Wikipedians,

I have just added archive links to one external link on Hot tub. Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

Added archive http://web.archive.org/web/20120225074401/http://www.energy.ca.gov/appliances/database/excel_based_files/Pool_Products/Portable_Electric_Spas.zip to http://www.energy.ca.gov/appliances/database/excel_based_files/Pool_Products/Portable_Electric_Spas.zip

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—^{cyberbot II}_{Talk to my owner:Online} 05:23, 29 February 2016 (UTC)[reply]

Caldera?

From History section:

The earliest hot tubs were calderas in which hot stones were placed to heat the water.^[1]

What is "caldera" supposed to mean in this context? I removed the Wikilink, as it can't possibly refer to a volcanic depression. The reference is no longer accessible. Dlthewave (talk) 17:07, 20 July 2017 (UTC)[reply]

References

^ Ricker, Rick. "Anthology of the Hot Tub, a Brief History of the SPA". Archived from the original on 11 April 2013. Retrieved 29 November 2012.

External links modified

Hello fellow Wikipedians,

I have just modified 4 external links on Hot tub. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 18:29, 1 January 2018 (UTC)[reply]

Jacuzzi or jacuzzi

I believe the reference to Jacuzzi is misleading because when referring to the genericised trademark as a hot tub it would be written in lowercase. I suggest that the reference to it being a trademark is still highlighted by linking to the trademark.

AussieWikiDan (talk) 00:47, 31 August 2020 (UTC)[reply]

I will edit this page again if there is no objection? AussieWikiDan (talk) 15:31, 6 September 2020 (UTC)[reply]

is not Poeples fraud but media selling me to dead with bossand boy vs to my life boy and boss and their fans 41.116.67.184 (talk) 10:14, 6 September 2023 (UTC)[reply]

all they support poeples not me and my family and they want me to ignore my vision about boss and boy they make v for us 41.116.67.184 (talk) 10:19, 6 September 2023 (UTC)[reply]

[1] ttp://www.rhtubs.com/104f.htm

[2] ttp://bchotsprings.com/

[3] ttp://www.rhtubs.com/104f.htm

[spasandstuff-4] Ricker, Rick. "Anthology of the Hot Tub, a Brief History of the SPA". Archived from the original on 11 April 2013. Retrieved 29 November 2012.

[1]

[2]

[3]

[1]