Talk:HIsarna ironmaking process

Pig iron pellets

The "pellets" refer to an intermediate product of the steelmaking process used by Tata IJmuiden and other ULCOS partners. Before introducing iron to the blast furnace, they process raw ore into pig-iron/coal pellets. These pellets are very porous, which creates a large reactant surface of pig iron and coal for the hot air in the blast furnace. This has the effect of lowering the amount of energy needed to process a given weight of iron, because it will melt and react more rapidly.

The point of HIsarna is that you don't need the preprocessing step anymore; HIsarna improves the reaction efficiency for powder ore and coal and avoids the downsides of powdered coal from the regular process. -- BenTels (talk) 21:33, 15 July 2012 (UTC)

Maintenance banner removed

The following maintenance banner was removed: {{multiple issues|
{{cleanup|reason = Appears to contain an incorrect understanding of steelmaking - what are the "pig iron pellets" referred to, appears to describe production of iron droplets from oxygen and iron ore|date=July 2012}}
{{expert needed|date=July 2012}}
}}
The issues identified have been addressed in the article. Vyvyanbstrd (talk) 21:17, 26 June 2018 (UTC)

The Clarification Requested

(Mkhomo (talk))The article as written jumps into one specific variant of Direct reduced iron (DRI) in an idiosyncratic context. There are many DRI processes that have been developed over almost 50 years. The original goal was to produce direct reduced iron (in solid state).

1. The SLRN Process : In 1965 the very first DRI developed was the Outokumpu Process by a consortium including STELCO of Canada, Lurgi, Republic Steel (USA) and National Lead, which caused the process to also be commonly known as SLRN. This process adapted the conventional limestone-to-lime converting kiln into an iron ore and coal fines iron reduction kiln which produced sponge iron which was 'refined' by magnetic separation of iron from gangue (aluminium silicates), ash and unburnt coal. The process had high effluent of pollutants and low throughput, but was seen to be effective with a 95% yield . Further DRI Process Improvements included:
2. Kobe Steel's ITmk3 (Iron Technology Mark III) direct reduction process which improved throughput (but not the other drawbacks) by using a rotary hearth semi-fluidised bed furnace operating at 1500 Celcius. Iron nuggets had to still be magnetically separated from slag with size screening.
3. Kobe Steel's MIDREX shaft furnace process operating at higher temperature using hydrocarbon (natural) gas in place of solid coal and producing hot iron briquettes which were cleaner. Its disadvantage was fuel losses due to incomplete combustion of hydrocarbons.
4. FINEX process by Siemens VAI and RIIST (Research Institute of Iron and Steel Technology) and POSCO of Korea which instead continued using coal fines in a fully fluidised bed reactor and used the effluent hydrocarbon gas to smelt the iron for a fluid iron / slag separation in a second stage. Although high in throughput the high abrasion wear of the reactors became a disadvantage.
5. Originally developed by VOEST-ALPINE , a more commercially successful COREX process now owned by Siemens VAI used a pre-fluxed and coal impregnated iron ore pellet as charge for the vertical shaft reduction reactor. Reaction mass transfer relied on high porosity of the pellet charge. COREX included a second stage smelting and liquid iron / slag separation. A number of COREX plants are commercially operational. Its drawback remains the high level of combustible effluent gas which is usually exported to an electricity generation plant to make the overall process economically viable. (Incidentally, The ~EX for extraction trade names allude to a process feature so they may serve as mnemonics, with MIDREX referring to Methane Iron Extraction, FINEX for Fluidised Iron Extraction and COREX for COAL ORE Extraction respectively).
6. The ROMELT hearth furnace by Moscow Institute of Steel and Alloys which employs two simple principles of an active bath reactor akin to an open hearth steel furnace, except that it is sealed and with injections of oxygen and other ore fines coal and flux charge reactants; and a boiler / steam turbine electric re-generator for export gas energy recovery. ROMELT has been assessed to be versatile with respect to coal and ore charge quality, but since it has no commercial installation, is considered largely experimental but the process has been tested at the large pilot-industrial plant of Novolipetsky Steel Works (NLMK).
7. Similar to ROMELT, but more a mutation of a Blast Furnace and Basic Oxygen Furnace (BOF) vessel is HISMELT developed by a Rio Tinto Group subsidiary (also named HISMELT ). A conventional Blast furnace relies on a vertical shaft down which charge descends while combustibles and hot heat transfer gases ascend, with hot air entering the furnace from tuyeres located at the lower section above the hearth. The migration of melting and reducing charge above is intermediated by a matrix of coke which remains solid and combusts partially into reducing CO which exits at the top as spent reduction product CO2. HISMELT reverses this flow configuration by top-blowing oxygen enriched pre-heated air blast as per BOF and also injecting fluxes, coal and ore fines per BOF/EAF steel making refining lances located below as per blast furnace tuyere locations, into the molten charge in the hearth. The downward top blast is also guided into a vortex flow to further enhance agitation of the gaseous eruptions that rise from the bath. The partially oxidised rising bath effluents get fully oxidised as they encounter the oxygen enriched top blast and the hydrocarbons in off-gas generated exit in a top flue more spent than in other DRI processes, although amenable to further combustion for complete energy recovery. HISMELT is an acronym for High intensity Iron Smelting.
8. Finally according to this present article is the HISARNA process, an apparent hybrid variant of HISMELT, retrofitted from a earlier Tata Steel ULCOS[[7]] DRI process which was most likely of the COREX genre (hence 'pig iron pellet'). Specifically this prior installation was referred to at ULCOS as an experimental blast furnace using a COREX-like iron ore pellet charge.

Rio Tinto distinguishes HISARNA in the DRI evolution of HISMELT as having added the ability to capture and store CO2 directly without separate CO2 scrubbing . But this feature is not DRI per se but a separate vacuum-pressure swing adsorption VPSA gas separation technology for removing CO2, leaving off-gases that may then be reused to reduce CO2 effluents. HISARNA therefore is not actually a DRI technology distinct from HISMELT but rather a supporting unit process. As an example a DRI input unit process enhancement such as the SASOL-LURGI coal gasifier allows the use high ash coals in the DRI chain by pre-gasification and exporting the gas to a MIDREX type reactor. But implementing a such chain does not amount to an improvement of MIDREX. HISARNA is therefore largely a marketing trade name for a specific implementation of a HISMELT DRI process chain.

Given that background, the article confuses the readership with the term Pig Iron Pellet to refer to COREX (process (5) above) iron ore pellet charge used by HISARNA's predecessor plant at Corus, with perhaps a solid sponge iron product of say SLRN (process (1) above), or the powdered iron product of ITmk3 (process (2) above), or the hot briquette iron of MIDREX (process (3) above), or possibly a hot iron briquette produced at the ULCOS experimental blast furnace. This confusion is corroborated in BenTels above posting. I suspect it is the peculiarities of the ULCOS installation and the history that causes the author's terminology to ignore other meanings.

With HISMELT for example, a founding consortium member Nucor sought just the pig iron product, which had to be cooled from the HISMELT process, from liquid hot metal to solid pig iron proper. Pig iron is a historical term referring to the carbon-saturated solidified blast furnace hot metal. In the beginings of HISMELT development, the solidified product (per Nucor) is referred to as pig iron; but it is common in industry for identifying descriptors to cross contextual boundaries, hence the use of the term pig iron pellets when actually referring to COREX premixed charge pellets. Pig iron pellets should actually only best refer to the MIDREX hot iron briquettes although these are not legally a pig but metallic sinter. The pig in pig iron was originally the pig-like lump that medieval foundry workers recovered from their then small iron furnace casts. Pig iron is the carbon saturated metal solidified from a blast furnace cast. Blast furnace lore maintains that it was 'pig' due to the occasional squeal as the solidifying melt blocked further escape of gasses from the solidifying cast. The article can be minimally clarified by altering 'Pig Iron Pellet' to 'Iron Ore Pellet' and by distinguishing the unit processes in the various ULCOS projects and by not giving the impression that HISMELT has been improved upon by UCLOS but rather that the ULCOS proving prototype has migrated from COREX DRI to HISMELT DRI. It may also help if the ULCOS writers are clear as to whether their HISARNA experiment actually includes BOF refinement into steel !within the HISMELT vessel! for if not, they should limit their description to Ironmaking and not Steelmaking.

On looking into this last observation, the article as written also contains historical inaccuracies, especially with the consistent use of the term 'steelmaking' where 'ironmaking' would have served better. The history section gives the impression that the HISARNA DRI concept originated with the Hoogovens Cyclone Converter Furnace. But the article history repeatedly indicates that all the Hoogoven research efforts came to naught. The proper history of 'HIRSANA', which should be better known as HISMELT DRI process lies with the unique Klockner Werke bottom blown basic oxygen steelmaking process used at their now defunct Maxhutte Steel Works of Bavaria Germany and which works lent its name to process (OBM) 'Oxygen Blown Maxhutte' steel or KOBM 'Klockner OBM' steelmaking process for reducing, say, unwanted vanadium from molten steel.

It so happens that Broken Hill Proprietary's New Zealand (BHP NZ) operations at Glenbrook New Zealand found KOBM to be useful at treating their high titanium dioxide iron ores, hence adapted KOBM into their operations. It is possible that this awareness of BHPNZ crossed over to neighbouring Australia where a then Australian division of Rio Tinto's, viz. Rio Tinto Australia (CRA) aggressively pursued this technology by entering into a development joint venture with Klocker Werke to adapt KOBM to smelting iron ore. CRA which later became a group member of Rio Tinto Group persisted in this effort even after Klocker dropped out, and finally succeeded in issuing forth what is now celebrated as HISMELT. The upside of this article's faux pas to me though is the realisation that HISMELT can actually be developed further to combine iron and steelmaking in closely coupled unit processes if not in a merged vessel.

I'm posting this for others to use in responding to the clean-up post as I have no inclination to retrofit the author's writings, given the original intention to post on ULCOS' HISARNA but neither on DRI evolution nor on HISMELT, which the UCLOS author only mentions in passing.(Mkhomo (talk) 11:04, 22 October 2012 (UTC))

In acceptance of my 'talk' contributions I believe the only remaining issue is in the 'Process' article section that indicates that HISARNA is a Steel-making process rather than Iron-making! SARN-Folk, Water is to Ice as Iron is to Steel. Thanks. — Preceding unsigned comment added by Mkhomo (talk • contribs) 10:02, 2 November 2012 (UTC)

HIsarna Ironmaking Process

As already mentioned in a talk contribution below HIsarna is not a steelmaking process, but an ironmaking process. This ironmaking process produces liquid iron with a high carbon content, which can be refined to steel through e.g. the BOF steelmaking process. Is it possible to change the page title? Or otherwise, start a new page called HIsarna Ironmaking and refer to that from the current page?

Further to that, the text contains various technical mistakes and misinterpretations. It refers to pig-iron pellets, where iron-ore pellets are meant. The description of the process steps from ore and oxygen injection into the cyclone to the injection of carbon into the slag layer is not fully correct.

Finally, the technology development has made quite a bit of progress since construction of the pilot plant, with four campaigns on the pilot facility completedJvB 20:18, 17 March 2016 (UTC).

— Preceding unsigned comment added by Jvanboggelen (talk • contribs) 20:05, 17 March 2016 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified one external link on HIsarna ironmaking process. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20150403111257/http://www.tatasteel.nl/news-and-media/archief/Nieuws-2010/belangrijke-stap-in-corus-co2-project-hisarna.html to http://www.tatasteel.nl/news-and-media/archief/Nieuws-2010/belangrijke-stap-in-corus-co2-project-hisarna.html

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 07:45, 27 October 2017 (UTC)

Historical Cyclosteel process

Direct reduction with a cyclonic reactor is not a very new idea. Can somebody explain the link and the differneces with the Cyclosteel process developed by the British Iron and Steel Research Association in the 1950s ? See here, p. 631 to have a citation. Borvan53 (talk) 21:40, 4 March 2019 (UTC)

The American Metals Market Mineral Commodities Trends citation points to British Iron and Steel Research Association (BISRA) 1956 Vols 169 & 170 mention of a novel Cyclosteel process to be piloted. I could not find immediate references to the pilot itself or reports about it. The earliest and nearest BISRSA publication catalogued for the broad steelmaking subject is dated 1959 and not immediately accessible. So it is not possible to decide if BISRA reported Cyclosteel any further.

The concept aligns with the idea of concurrent iron reduction and steel making, which would be revolutionary thinking for the time. The Basic Oxygen Furnace (BOF) process had only started replacing the acid open hearth, and I suspect that the metallurgy of oxygen blowing had by then not yet become well determined. I would guess that the effort came to naught for a number of probable reasons. The cited document indicates a process design which entails preheating fine ore in a fluidized bed driven by reductive gases from the reduction reactor, blowing the partially reduced iron ore into the reduction chamber cyclone along with pulverized coal, enabling the charge to circulate and reduce into iron while descending down the reactor shaft in spiral fashion. Then the final part is the injection of oxygen to remove excess carbon in BOF fashion. This final stage must have posed insurmountable difficulties for that time, and have only resolved in the HISMELT design of four decades decades later, of oxygen blowing under harsh hearth abrasion temperature and pressure conditions, where the oxygen lance has essentially has acquired the resilience of a blast furnace tuyere.

Had the cyclosteel process pilot succeeded in any form, it would certainly be better known today, as it would have reduced steel making cost by orders of magnitude. HISMELT is closest to the Cyclosteel technology concept. Of existing DRI integrated into steelmaking one finds dual processes, an ambient pressure kiln fired DRI unit with a separate steel alloying stage, frequently driven by electric arc rather than Oxygen lance which would have certainly blown out the entire cyclone column if the shaft were ever connected to the hearth. The dual steelmaking is employed in high vanadium ores where the electric arc hearth removes Vanadium into slag in the same fashion as in HISMELT precursor technologies(Mkhomo (talk) 20:12, 15 November 2020 (UTC)).