Jump to content

Talk:Gas constant/Archive 1

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia
Archive 1

Move entry to Gas constant

This entry should be moved to Gas constant or even Universal gas constant and it is the Molar gas constant that should be REDIR-ed. Whatever you do with the units etc. it does not change the sense - is there any other (universal) gas constant? Its sense lies in its molar nature and you do not need to do is again (buttery butter). If it is not molar, then it has its own name and it is Boltzmann constant, k (same but per molecule), and R = NAk. If you need sth more like specific heat (J /g K)it stops being constant ...

I know that some sources use this molar adjective - even Encycl. Britannica - but if you check sth more serious like P.W. Atkins "Physical Chemistry" (4th ed., Oxford 2000), IUPAC's Goldbook http://goldbook.iupac.org/goldbook/G02579.html , Gas constant is all you get and it is all you need.

AWM~ads 21:47, 11 Mar 2005 (UTC)

An IUPAC convention is most certainly a convincing argument. However, another serious source CODATA does use the molar adjective. See also "CODATA recommended values of the fundamental physical constants, 1998", Rev. Mod. Phys., vol. 72, No. 2, 2000. So, the issue seems debatable and at least not very urgent.
That being said, your arguments are sound and IUPAC deals more with naming conventions than CODATA. Therefore, I support the move.
Jan van Male 09:36, 12 Mar 2005 (UTC)
I like your attitude. I suggest similar move for Avogadro's number which is not a number but an Avogadro's constant. AWM~ads 22:50, 25 Mar 2005 (UTC)
I don't think a similar name for Avagadro's number would be fitting, as in my experience someone involved in the field is more likely to call it Avagadro's Number than Avagadro's constant. On the other hand, the gas constant does simply get called the gas constant, with some adjective infront of gas.EagleFalconn 19:11, 22 Apr 2005 (UTC)

Specific gas constant

This page (gas constant) should not talk about the universal gas constant exclusively. Dividing the universal gas constant by the molar mass of a gas results in a new gas constant (specific to the gas). There was already some confusion on speed of sound where the text linked to gas constant explicitely claiming that was in fact the universal gas constant which it clearly isn't.

gas constant should either be a disambiguation page for universal gas constant and specific gas constant or discuss both concepts on this page. Algae 20:41, 1 January 2006 (UTC)

I added a page on the specific gas constant. Feel free to review it, and make it more useful. KMossey 05:44, 8 June 2006 (UTC)

Answering Seth Ilys

The article said: The Boltzmann constant is conversion factor between gas units. It tells how many joules per kelvin make a molecule. Seth Ilys deletes it saying: I have no idea what that sentence actually means, let alone what it's supposed to mean. Well, if N is the number of molecules then Nk=PV/T is the amount of gas measured in joule per kelvin, so k is the amount of gas of a single molecule. Bo Jacoby 05:12, 31 January 2006 (UTC)

Answering 203.220.11.220

You write: Because the gas laws are so inexact for real gases, the gas constant is not known as accurately as most other fundamental constants of physics. This is not true. 6 significant digits is not bad, and in the low pressure limit the ideal gas law is precise. Bo Jacoby 09:07, 2 February 2006 (UTC)

Agreed. 6 significant digits seems pretty good compared to other constants. The gravitational constant has fewer. I wouldn't mind having list of physical constants, though, Category:Physical constants is not a great substitute. Algae 09:42, 2 February 2006 (UTC)
See Physical constant. Bo Jacoby 10:16, 2 February 2006 (UTC)
Thank you. Algae 11:35, 2 February 2006 (UTC)

k *is* the Boltzmann Constant

for the same reason. It's just usually expressed in liter-atmospheres (a unit of energy) per degree Kelvin (a unit of temperature) mole (unitless), rather than in Joules per Kelvin. Check it yourself -- when you convert the units, 0.08206 liter atmospheres per kelvin mole is 1.38e-23 J/K.

The reason for the similarity is that the pressure of an ideal monatomic gas is the same as its internal energy density, according to the kinetic theory of gas.

So, er, I'm sticking Boltzmann constant back in (it was recently diked out) zowie 15:18, 31 March 2006 (UTC)

2/3 cut - ref please

Removed the following:

If we define the temperature of a gas as the average kinetic energy of its molecules then the constant simplifies further when the units are standardized. Instead of measuring energy sometimes in Kelvin and sometimes in Joules, the same unit could be used for both measurements. Instead of the gas constant being in Joules per Kelvin, the constant would then be dimensionless and reflect simply the physics of the gas law and not the conversion between different units. The true value of the gas constant can then be seen to be simply 2/3.
PV represents a double counting of the proportion of kinetic energy in a gas in one direction, eg up-down, left-right, or backwards-forwards. The double counting comes from calculating m*v*v whereas kinetic energy is 1/2*m*v*v. If molecules hit something and stop, one would be measuring 1/2*m*v*v. If they hit something and bounce back, then we are measuring m*v*v.
nT represents the total kinetic energy in a gas in all three dimensions and not just perpendicular to a plane. 1/3 of the energy is in each direction, up-down, left-right, or backwards-forwards.
PV/2 = nT/3
The Universal gas constant therefore has a value of 2/3.
Physicists usually don't explain that as they don't really understand it themselves.
Ivan Urwin

Provide a ref. Ivan or it stays out :-) Vsmith 18:03, 6 May 2006 (UTC)


What do you have a problem with? RHS: nT/3 - one third total kinetic energy - that only a third of the kinetic energy would be perpendicular to a given plane? LHS: PV/2 - Or that the m*v*v in pressure calculations double counts kinetic energy of 1/2*m*v*v perpendicular to a plane? Moles are dimensionless, just like a dozen is 12. You just need a calulator and to convert between Kelvin and Joules to verify it. You could call the gas constant 8 inchs per foot if you want! Of course if physicists want to put it in ergs per dozen electron volts or BTUs per mega barrel of oil equivalent or Joules per mole Kelvin instead of getting their calculators out: fine! That won't stop the fundamental physics of the gas equation saying its 2/3.

=

Here, not rigorous physics, but enough that people can see for themselves that the gas constant is 2/3 when coherent units for energy are used.

Take a particle of mass m going at velocity v, and to simplfy calculations imagine it in a sphere of radius v. Time taken from centre to perimeter is then 1 second, and time back to the centre is another second. Exchange of momentum is then 2mv in 2 seconds, and rate of change of momentum is what some guy called Newton called force. So the force is mv, and the pressure on the sphere is mv/A where A is the area. Volume in three dimensions is 1/3*base*height, so the volume of the sphere is (1/3)*v*A.

PV = (mv/A) * (1/3)*v*A = (1/3)*m*v*v = (2/3)*(1/2)*m*v*v = (2/3)*T

Sum over n particles ... The gas law is PV = n*(2/3)*T Call the constant R. R=2/3. Change the units of measurement 2/3 is 4.01E26/kmol (in the same way that 2/3 is 67 per cent) 2/3 is then 8310 J/Kelvin/kmol (in the same way that 2/3 is 8 inches per foot) R=8310 J/Kelvin/kmol

OK, we have a particle with velocity v bouncing around in a sphere of radius v to simplify calculations...and this is published in ??? Vsmith 00:19, 7 May 2006 (UTC)

The constant only has a different value if you measure the heat applied in Joules or BTUs and the temperature rise in Fahrenheit or Kelvin, etc. The mental problem people have is in switching between units: You can measure a tank's fuel efficiency in gallons per mile and the area of a field in acres. Somebody that understands what they are doing can cope with measuing areas in gallons per mile, or measuing a tank's fuel efficiency in acres or square metres. For some people tax is 20 cents in the dollar. Other people manage to cancel the two different units of currency and just specify the tax rate as a dimensionless 1/5.

Take a monatomic gas and heat it. All (ie. 100%, 1) of the heat causes a temperature change, rather than causing the molecules to spin or vibrate.

3/2R = 1.

Therefore R=2/3.

Do I have a reference for 3/2R when heating monatomic gases? No!

Physicists understand this better than you think. The ideal gas law, PV=nRT, can be shown to be equivalent to PV=NkT, where k is Boltzmann's constant, which serves the role of converting temperature to equivalent energy units. It's also a well-known result that the kinetic energy per molecule is (1/2)kT per degree of freedom. Atoms in a monatomic gas have three degrees of freedom, so the kinetic energy per atom in that case is (3/2)kT. None of this has anything to do with the gas constant, though, and nobody would claim R=2/3 in any units. SimpsonDG (talk) 01:07, 27 September 2017 (UTC)

R=2 (2/1), R=1 (2/2) or R=2/3?

Anybody who has seen Newton's cradle - the swinging balls on strings - will know that if a particle hit another and transferred all its kinetic energy, then it comes to a stop. This is obvious anyway, without any kinetic energy, something cannot be moving. When we measure PV, (pressure times volume,) we are looking at a state where molecules collide with the surface they exert a pressure on, and bounce back. We are therefore measuring something based on twice (2!) the kinetic energy perpendicular to the surface. Assuming the kinetic energy is equally partitioned in three dimensions, that is equivalent to saying that PV measures the translational kinetic energy in two dimensions, since twice the energy in one ddimension equals the energy in two dimensions.

Bolzmann's constant (k) in the gas law does two things. It partly converts units, between joules and Kelvin say (for example) and it partly fills the role of the gas constant, which has a value telling us that PV is measuring the kinetic energy of the gas in two of the three dimensions of space, or equivalently, twice the portion of kinetic energy in one dimension, namely twice that perpendicular to the surface the pressure acts on.

This means that we can convert between temperature energy and other energy, kelvin and joules (for example), but only once we decide on a definition for temperature. Different definitions of temperature will result in different values of the gas constant and different values of the conversion constant. If I use strange units to measure circles, then you can calculate and convert satifactorily once you measure a circle for yourself and compare with my figures. However the 'universal' constant you use includes no knowledge of whether I am measuring a radius or a diameter. Only when you understand what my measurement really means can you determine a proper constant value for converting units, and assign another constant to account for measuring different features of the circle, eg radius, diameter or even circumference.

If I measure diameter and you measure radius, then a factor of two in your universal constant will result from the physics of what is going on, and the rest will be units conversion. The conversion factor might be so many weirdo units per dozen inches. Somebody else might think 'dozen inches' is a bit strange and come up with a different constant in weirdo units per inch. This is what has happened with the gas constant in joules per mol kelvin, or joules per kelvin.

(A) If we define temperature as the energy per degree of freedom, (the kinetic energy in one dimension) then the gas constant is R=2 and the conversion between joules and kelvin is with a constant k/2.

(B) If we define temperature as twice the energy per degree of freedom, then the gas constant is 1 and the conversion between joules and kelvin is with a constant k. This I believe is an unnatural choice. It is however what happens when people take the Bolzmann constant as being simply a conversion factor and forget about the gas law.

(C) If we define temperature as three times the one dimensional kinetic energy, (ie the kinetic energy in three dimensions - the total translational kinetic energy), then the gas constant is 2/3 and conversion between joules and kelvin is with a constant 3k/2.

The first choice (A) is not a bad choice to make. For example we read for diatomic gases around room temerature that Cv~=(5/2)*R. With R=2 this becomes Cv=5. This is obvious; the total energy required to heat something with energy equally split between 5 degrees of freedom is simply five times the energy required per degree of freedom.

Poor students are then being confused by people teaching this stuff that do not understand it themselves. To elimintate the conversion constants it becomes necessary to take a ratio of two values that both include the conversion constant, eg a Cp and a Cv, and call this gamma; and then, to manipulate this to come up with stuff like (gamma-1)/gamma to get to something which should be fundamentally simple to start with.

Take a diatomic gas around room temperture and use definition A for temperature. Cv ~= 5, Cp~=7, since (PV stuff again) it takes the energy equivalent of a couple of degrees of freedom to push back the environment.

Gamma = Cp/Cv = 7/5

Gamma-1 = 2/5

(Gamma-1) / gamma = (2/5)/(7/5) = 2/7.

We are back to a simple ratio of counting a few degrees of freedom, and the clarity of this is completely remove from the students mind by doing calculations in joules per mole kelvin with figures only suitable for calculators, etc.

Merge specific gas constant

It will be useful to merge the article on specific gas constant here. I guess many readers will be interested in knowing about both the terms and it would be better to have them on one page. -Myth (Talk) 17:54, 27 February 2007 (UTC)

Merger completed. -- Myth (Talk) 12:34, 19 March 2007 (UTC)

8.314472 or 8.314482?

Slight inconsistancy in the statement of the value of the Universal Gas Constant. In the table it says 8.314482. I assume this is just a misspelling but I'm not confident enough to correct it myself so thought I'd make sure.

130.88.186.123 16:28, 17 April 2007 (UTC)

This is my first post on this page: 8.314472(15) J K−1 mol−1 is the only unit from reference #1, the rest are derived mathematically, perhaps the note should be moved to reflect this.

Secondly the units in atmospheres are derived from the joule unit above by the relation 101325 Pa = 1 atm exactly. Thus these units are correct: 8.205746×10−5 m3 atm K−1 mol−1, 82.05746 cm3 atm K−1 mol−1, This unit is wrong: 0.0821(14) L atm K−1 mol−1, Maybe it is from an earlier source or there was a math error, but it should be fixed. the correct value is: 0.08205746(02) cm3 atm K−1 mol−1, The (02) could also be added to the other atm units.Rgbutler (talk) 14:22, 16 April 2010 (UTC)


      • Check some of the values displayed on the page. In the main text 8.3154621(75) is nowhere close!

Mschaffer (talk) 18:11, 16 July 2013 (UTC)

Reversion of edit from 128.252.173.197

I went and reversed a change made by 128.252.173.197. It had been changed from the proper value in terms of (L*atm)/(K*mol) (0.0820574587) to 82.0574587, which is the same value, but in terms of mL. Liter is the standard measure for gases, so that (0.082...) is the proper figure to keep.

R = 8.314472(15) J · K-1 · mol-1

In the formular, J is not denoted. —The preceding unsigned comment was added by Natasha2006 (talkcontribs) 14:48, 7 May 2007 (UTC).

Added a note on three of the constants in the table

Three of the values for the universal gas constant contained in the table are for air only. Since these three are mass-based vs. molar based constants, they can only describe a substance with a certain molar weight, which is in this case air. I added a note mentioning this, as there did not seem to be anything already in the article noting this fact. —Preceding unsigned comment added by 98.25.180.184 (talk) 03:35, 7 April 2008 (UTC) Note on the definition of the Kelvin scale : The definition of the Kelvin is : 0 deg C = 273.15 K not 273.16 273.16 is the defined temperature of the tripple point of water, 0.01 K above 0 C, where ice, water and vapor are in thermal equilibrium at a pressure of 6.108 hectopascals, way below atmospheric pressure 101.164.87.62 (talk) 01:03, 21 November 2016 (UTC)

Too many units

Do we really need that huge table of the gas constant in different units? For example, who uses slugs? Why are there so many versions that seem to be in terms of mass? I think we need to trim the list a bit. Mathfan (talk) 17:56, 2 May 2008 (UTC)

Also, the first couple units are missing units of pressure. If nothing else, that should be fixed. 207.233.109.120 (talk) 16:41, 12 March 2009 (UTC)

Mathfan: don't be an elitist. For reasons you may not understand, Engineers use several dozen sets of units. Why the fuck did you get rid of that table? That table has helped me for the past few months and now I'm having trouble finding R at the esoteric units that I need.

Seriously? I didn't realize those units were actually helping anyone. What's your job? Also, what elitism? Mathfan (talk) 11:35, 15 May 2008 (UTC)

the table with many units is very useful as a quick reference and in no way detracts from the quality of the article. —Preceding unsigned comment added by 192.5.109.49 (talk) 20:36, 24 October 2009 (UTC)

I also do not understand why we should delete values in a reference table just because the SI-nazis frown upon them. Welcome to the real world, where people in different professions use different units. -134.84.3.102 (talk) 02:11, 9 April 2010 (UTC)

I am concerned about the table simply because I don't know the source of most of the data. If you check the given reference, it cites only the very first value in the table. All those other table entries are coming from other unknown sources. I have no idea whether they are reliable! —Preceding unsigned comment added by Dcbrc2 (talkcontribs) 20:39, 10 August 2010 (UTC)

Do not delete the table. When referencing old engineering journals, despite my displeasure, they often use these units. —Preceding unsigned comment added by 76.113.118.85 (talk) 20:32, 14 January 2011 (UTC)

Came here to figure out why the american units have been deleted. That was a poor edit. Many, many people, inside of the U.S. and out, have to use American Engineering units. I have talked to people far and wide about the utility of this page, because I reference it a lot, and the feedback indicates it is probably one of the most used wikipedia pages in science and engineering. The list before was acceptable, and even that I had to do some conversions on at times. With regard to being unsure of sources: they are simply unit conversions. You don't really need to cite them because we know unit conversions out to infinite sig figs, you just need to cite the source of the original measurement. Bring back the units. Expand them. I will even help with the conversions if you like. — Preceding unsigned comment added by 2601:602:8C00:7EEA:28EF:F5E4:4CF1:126A (talk) 16:56, 17 October 2015 (UTC)

The other units have been deleted from the table because the value of R has been updated within the last year. It isn't a simple matter of unit conversions, since the precision of R in different units will also change due to uncertainties in conversion factors. As I mention in a discussion below, while I appreciate that Wikipedia is a phenomenal resource for learning about a wide range of topics and as a launching ground toward more in-depth information, I find it extremely worrisome that professional scientists and engineers would use this page as a source of reference data. Professionals should be referring to the official values as published by appropriate governing bodies. JCMPC (talk) 02:12, 11 December 2015 (UTC)
English units are still standard practice in chemical engineering -- one of the fields where R is likely to be most used. SimpsonDG (talk) 01:11, 27 September 2017 (UTC)

Can someone please put back the version of the gas constant using ergs? Biochemists need this if they are manually processing sedimentation equilibrium profiles. — Preceding unsigned comment added by 209.129.115.6 (talk) 20:24, 9 April 2019 (UTC)

Entropy and R: units

I just wanted to ask if anyone knew actually why the units are the same. Why is R a measure of entropy?

I don't know if this is just a stupid question or not, but my chemistry teacher didn't know and asked me, and said to tell her when I found out.

Please help!

I have a keen interest in chemistry and physics and stuff, so don't worry about it being over my head!

Sorry if this is the wrong place to write this. —Preceding unsigned comment added by Debzer (talkcontribs) 10:15, 13 February 2009 (UTC) !

R is not a measure of entropy. The units of entropy are actually kind of arbitrary. R (gas constant) and k (Boltzmann's constant) are related by k = R/Na, where Na is Avogadro's number. Entropy is generally defined by S = k*log(W), with W being the multiplicity. It could just as easily been defined S = log(W), S = W, or many other ways, and still largely encode the same information about systems. k or R are used as conversion factors to make it both have useful units in terms of other thermodynamic properties and not have a ridiculously large value, and thereby be a little more manageable mathematically.

So in summary, R (and thereby k) are just arbitrary but usefully chosen factors which make the concept of entropy easier to wrangle mathematically. — Preceding unsigned comment added by 2601:602:8C00:7EEA:28EF:F5E4:4CF1:126A (talk) 21:14, 17 October 2015 (UTC)

Numeric representation - the parentheses are confusing

The article says R=8.314 472(15) SI units. It turns out the 15 in parentheses is actually the standard deviation in the last two digits.

Parentheses in math usually denote something else completely. The usual meaning of 8.314 472(15) would be 8.314 472 times 15.

This use is non-standard. It is highly confusing. Can it be replaced with a more standard notation?

-Splitpeasoup (talk) 00:06, 28 October 2009 (UTC)

Erm, it is standard notation for representing the standard uncertainty in the least significant figures. Physchim62 (talk) 00:34, 28 October 2009 (UTC)

Decimal Places or Multiplication

The use of (15) after the constants is not universally know. I assume its number of decimals. The parantheses could be confused with multiplication. Maybe we want to consider a more common way of representing ongoing digits. —Preceding unsigned comment added by Russot1 (talkcontribs) 02:33, 12 February 2010 (UTC)

I don't understand it, and it sounds like you weren't the one who made it. If we could get something I've been taught is a standard (Confidence interval, significance level), that'd be great. Once I understand it I'll try and edit it. Someone seems to have just copied it from a huge table with a special notation to save space. Inthend9 (talk) 18:57, 1 March 2010 (UTC)

It seems fine to me. That is how it's presented in the reference, and the article explains what it means. After a quick search through WP, it seems that most other physical constants are presented the same way. Djd sd (talk) 06:41, 4 March 2010 (UTC)

The numbers in parentheses are the additional decimal points which have been measured but lie outside the accuracy of the measurement process. This means the values in the parentheses eg (15) could be used for the purpose of calculation, but any value that results from such a calculation would not be more accurate than the number of significant figures if those in parentheses were not considered. In other words, the values in parentheses are there to help avoid rounding errors if you’re trying to work to the limit of accuracy of the gas constant. I agree that this is not commonly known, and only confuses the issue. I would recommend removing it. —Preceding unsigned comment added by 213.146.172.146 (talk) 13:08, 25 May 2010 (UTC)

No, that's not what it means. The numbers in parentheses give the uncertainty, in "concise" notation. The notation is explained at this NIST site: http://physics.nist.gov/cgi-bin/cuu/Info/Constants/definitions.html SimpsonDG (talk) 03:11, 18 January 2015 (UTC)

Energy per kelvin per mole

The intro said that R is energy per kelvin per mole, but that's inconsistent - energy is a quantity, and kelvin is a unit. I changed it to energy per temperature increment per mole; I considered energy per temperature per mole, but that sounded awkward to me. As for mole, I left it in as is, because it's the only thing that distinguishes R from k. (Related discussion here: http://wiki.riteme.site/wiki/Talk:Ideal_gas_law#n_.3D_number_of_moles.3F ) Khakiandmauve (talk) 16:25, 8 March 2011 (UTC)

Rbar

User:68.232.114.179's edit to the equations in the specific gas constant section suggests that Rbar is used for the specific gas constant. I haven't seen that usage. I'm reverting the edit, as I see the equations as distinguishing the specific gas constant from the universal constant. Different notation conventions are discussed in the text below. If anybody is familiar with the use of Rbar for specific gas constant, I request that you add it there, preferably with a source. Khakiandmauve (talk) 19:51, 30 March 2011 (UTC)

Constant Verification

My first edit on Wikipedia, so I thought I would give it some background.

The specific gas constant of air, Rair, provided in the Society of Flight Test Engineers Reference Handbook - 2007 (page 01-43) is given in (ft*lb)/(lbm*degR) - degR = degree Rankine. A more convenient unit mix for my application was (ft*lb)/(slub*degR). The calculation: Rair = 53.35 (ft*lb)/(lbm*degR) = 1716.49 (ft*lb)/(lbm*degR).

Therefore I changed the specific gas constant given in the table from 1716.59 (ft*lb)/(lbm*degR) to 1716.49 (ft*lb)/(lbm*degR). A small change, but it was significant in my calculations. — Preceding unsigned comment added by Dbruce.ae05 (talkcontribs) 19:15, 22 November 2011 (UTC)

Which calories?

The table entries in calories don't say which kind of calorie they are using. It seems that it is the International Steam Table calorie, which is equal to 4.1868 J. But everybody knows that the One True Calorie is the thermochemical calorie, which is 4.184 J! :-) --Itub (talk) 18:46, 26 October 2012 (UTC)

I'll remember that when next I'm standing in a buffet line, scooping my calories up off a steam table. They're a little bigger than I thought... To bad the difference doesn't explain the problem the user above has, since it's too large by an order of magnitude to explain the difference between 1716.59 and 1716.49. SBHarris 01:18, 27 October 2012 (UTC)

I'm a chemical engineer who practices in Europe and the USA. Many journals use a "international" Joule based upon a thermochemical calorie. Thus the gas constant for most energy calculations is 8.3130 instead of the 8.3144. See for example page 1-18 Perry's Chemical Engineer's Handbook, 7th Edition. This allows for valid energy balance calculations in engineering. There should be some discussion of this here. — Preceding unsigned comment added by 66.167.75.42 (talk) 21:39, 4 December 2013 (UTC)

It looks to me like the value used for R here is consistent with the thermochemical calorie of 4.184 J. SimpsonDG (talk) 17:17, 13 January 2015 (UTC)

Mendeleev

I don’t read Russian, but I take it the references User:Watergrain adduced in support of the term “Mendeleev’s constant” show that Dmitri Mendeleev did important or pioneering work in defining or measuring the constant we now know as R. That’s all well and good, but the man’s own work can’t possibly support the claim that R is named after him in the literature, which is what “known as“ implies. Unless secondary sources—which in this case could include other scientists’ research papers–can be found to show that the term has any currency, or even historical presence in writing about the topic, its mention should be removed as WP:OR. There may be something worth summarizing in those references, however, to go elsewhere in the article. Any Russian-speakers who can summarize the relevant parts here?—Odysseus1479 05:26, 19 May 2013 (UTC)

Very helpful

For what it's worth, the section "dimensional analysis" clarified for me the meaning of the ideal gas law. PV is simply some molecules at some temperature (average kinetic energy), and the gas constant is just a tool for calculation. I don't know what the average non-expert reader wants from an article - but this is exactly what I look for. ---lifeform (talk) 23:02, 24 October 2014 (UTC)

Error in one of the R Values

I've independently double-checked all of the R values given in the table. They all appear to be correct, except for the one listed as "amu (km/s)2 K-1". The units should instead be amu (km/s)2 K-1 mol-1. Also, the value shown for this entry is incorrect. I would fix this myself, but I've found that anytime I make any change to any Wikipedia article, the edit is immediately deleted, and I get nothing but threats from bullying admins of "I'll have you blocked!" and "I'll have you banned!" and so forth. Nowadays when I find errors in a WP articles like this, I just leave the errors in place and don't bother fixing them, but maybe somebody else would be interested in fixing this. SimpsonDG (talk) 17:17, 13 January 2015 (UTC)

We can delete the value. I don't know why somebody would want R in such tiny units. You probably found somebody who had k_B in those units, where it is about 1.66 x 10^4 amu*(m/sec)^2 Kelvin^-1. If you have to divide by N to get an actual R (and yes, that puts a mol^-1) in, then you get a very small number like 2.26 x 10^-20. SBHarris 03:06, 14 January 2015 (UTC)
The correct value in these units should be 5.0070867(45)×1021 amu (km/s)2 K-1 mol-1.SimpsonDG (talk) 20:22, 17 January 2015 (UTC)

Table in "Specific gas constant" section of article

The table in "Specific gas constant" states that RSpecific for dry air is 287.058 J kg-1K-1, using 28.9645 g/mol.

Using RSpecific = R/M = 1000 * 8.3144621 / 28.9645 = 287.056987. From what I've gathered over the course of my life, that would round to 287.057 J kg-1K-1.

So either the table uses a different R than what the top of the article has specified (which would correctly fall within the stated uncertainty), or the number wasn't rounded correctly. For consistency, I would like to propose updating the table value to 287.057, since the article states R = 8.3144621 (and not use some user chosen value that falls within the uncertainty of the stated value). Or, explain why a different value of R was used.

Should we edit this? Using the current value of R = 8.31446261815324 J kg-1K-1 with a molar mas of 28.9645 g/mol makes a RSpecific of 287.0570048905812 or 287.057 to six significant figures.
The current value in the table implies that the R used was around 8.314491441 Jonbesga (talk) 20:00, 4 December 2020 (UTC)

Reason for constant's symbol

It's just a guess but symbols in Clapeyron equation in alphabet can be viewed like this - NoPqRsTuV - it's probably impossible to prove but alphabetic order could be the cause. Mithoron (talk) 18:42, 17 June 2015 (UTC)

CODATA recently updated their recommended values for fundamental physical constants. (http://physics.nist.gov/cuu/Constants/bibliography.html) These values were released by CODATA on June 25, 2015. To my knowledge, they have not yet been released in publication form. Based on prior history of CODATA revisions, the publication form will probably be released sometime in the next year or so.

Based on this talk page, I am willing to bet that people will be VERY upset that I removed many of the values from the table. To these people, I apologize. I removed any value of R that will need to be recalculated based on ALL of the updated CODATA values. There were simply too many to revise in a single edit, particularly since the uncertainty of each value should also be updated (and these are a bit more involved). I kept only those values that do not need multiplication factors (i.e. they only vary from 8.3144598(48) by a multiple of 10). Any help updating this table will be greatly appreciated; however, it might be easier to wait for a "reliable" reference table of R values to be published first so that we can avoid making unintended conversion errors. Any thoughts? — Preceding unsigned comment added by JCMPC (talkcontribs) 22:19, 16 September 2015 (UTC) JCMPC (talk) 01:00, 25 September 2015 (UTC)

I appreciate the efforts to include up-to-date values, but is it possible to leave the old values until the new ones are published? — Preceding unsigned comment added by Souperman1985 (talkcontribs) 03:43, 17 September 2015 (UTC)


Indeed you are correct in that many people are and will be frustrated by this change. Those constants have been sufficient for academic purposes for a lengthy amount of time. Though the numbers will change with the new data, the order or magnitude in change of these numbers will be inconsequential for the vast majority of users seeking to identify a specific constant. A change such as this should only be done when a full list of calculated values has already been made. By attempting to further the precision and accuracy of these numbers you have retarded the progress of many individuals own work.

As an analogy, say you have a television that was bought in 2004 that is only capable of 720i resolution. You decide an upgrade is necessary and you pre-order a soon-to-be released television that has 4k resolution and all the bells and whistles you could ask for; however, you have must wait two months before it is delivered to your house since the model has yet to be released. Once you pre-order your television, do you then immediately dispose of your old one while you wait for the new one to be delivered? Of course you wouldn't. You wait for the new one to be delivered and then swap units.

I understand your intentions and applaud your efforts, but in the large scheme of things its seems counterproductive at present time.

For those interested in seeing the old listings, you can go to the "edit" tab of the article and click "View History" at the top of the page. Scroll down to the entry dated "00:05, 1 September 2015" and click on "Prev". This page shows the entire table of values prior to their removal. — Preceding unsigned comment added by 216.23.217.186 (talk)

Please keep in mind that I am merely the messenger here. I did not personally change the values; I only updated the values on the page. With that being said, I must admit that I STRONGLY disagree with the above feedback to my changes. Fundamental physical constants are experimental values, which means that they must be periodically updated based on the availability of new data. Insistence that we continue to use old, out-dated values is just bad practice. If we all chose our favorite "vintage" of a particular value, we could never compare data. If the high precision of the CODATA values is unnecessary to a particular application, then the values can be rounded using appropriate rounding conventions. If other dimensions/units are required, then the user should be able to perform the unit conversions on their own and using internationally-accepted conversion factors. To be quite honest, I don't understand why any self-respecting scientist or engineer would ever use Wikipedia as a reference to such values when the internationally-accepted values are so well-publicized by various institutions (CODATA, BIPM, NIST, etc.) and are readily available on the internet (links are even included in this article). While I agree that unit conversions can certainly be tedious and annoying, no one should rely on Wikipedia to do this dirty work for them. JCMPC (talk) 01:00, 25 September 2015 (UTC)
I have to agree, especially with regards to the use of Wikipedia as anything beyond an initial waypoint for work at even undergraduate level and above, but I would contest that the periodic update of experimental values intrinsically dates any work based upon those values, and therefore would mean that data comparison would nonetheless be affected by the updates. One can continue to update their work — especially if one does not expect the rate of change of published physical constants to be especially great relative to the rate of development and publication of research — but any comparison of works across a significant enough time period would require changes to published constants to be taken into account, especially in comparisons in high-precision applications of the constants. Because of this, I would certainly expect good practice to use the latest values (partly to reduce the risk of one's work more rapidly becoming out-of-date), but also to include explicit reference to the source of a value in any work. — Sasuke Sarutobi (talk) 12:09, 3 August 2016 (UTC)
I agree with this sentiment; however, I would argue that the vast number of studies that utilize such constants do not have a high-enough precision for this to matter. For those experiments that are high enough precision, I am willing to bet that the experimenters are well aware of the continual changes to the values and routinely take them into account. This is the precise reason why many physicists and chemists choose to work in atomic units when studying atomic and molecular phenomena. It allows them to make predictions of quantities that are "timeless" since they only rely on integer numbers of relevant quantities like the mass of an electron. This is why many people (including myself) are so excited about the proposed redefinition of SI base units, which should hypothetically be a completely unified system that will never need updating, unless a new, incompatible property is discovered. JCMPC (talk) 18:14, 26 August 2016 (UTC)

Unit precision

Wondering why L atm/(mol K) and cm^3 atm/(mol K) has less precision than many of the other units. Is getting the greater precision not as simple as plugging the cited values for the gas constant into Wolfram Alpha? If not, the maximum precision could be 0.082057338(47) L atm/(mol K) and 82.057338(47) cm^3 atm/(mol K) respectively.Fletcher Porter (talk) 22:39, 1 November 2015 (UTC)

Can you explain what you mean by "plugging the cited values for the gas constant into Wolfram Alpha?" JCMPC (talk) 01:49, 11 December 2015 (UTC)

R value at SI system

I am tutor of physics quite a long, but with a surprize I see You think that R-8,31 at the SI system. Contrary many old and younger physics textbooks for 11-th grade of college and/or Universities as well teaches that if one uses 8,31 and Kelvins and Pascales=N/m2 and moles, then uneviteable he gets out the mass in GRAMS!!!!!!! Because the Si system rely on Dalton=mole as molar unit in contrast to kilomole, and wikipedia chapter about mole certify that SI system unit iz mole and never kilomole. Then only way to get out the correct measure of mass from Gas-State equation, (what Russians so love to call strange for Mendelyeyev-Clapeyron equation) P*V=M/m*R*T is to set R as 8310 instead of 8,31. Just NIST given value comes out of America what uses half to half Imperial with CGS and 8,31 corresponds to CGS (grams!) The SI system basis is kilogram, thatswhy R=8310. One should explain better this thorn-bushy field here in the main text. — Preceding unsigned comment added by 109.229.204.220 (talk) 10:15, 18 November 2015 (UTC)

No. R=8.31 J/(mol K) in SI units is correct. I'm not sure what you're trying to say here, but perhaps your confusion comes from the fact that the SI "mole" is actually a gram-mole, not a kilogram-mole -- despite the fact that the SI unit of mass is the kilogram. SimpsonDG (talk) 01:20, 27 September 2017 (UTC)

History?

Is there anything relating to the history of the constant's derivation? I can't see much detail beyond the mention of Regnault's work in its early calculations and the constant's occurrence in the ideal gas law, but there's nothing to say about who refined it further and when. — Sasuke Sarutobi (talk) 11:53, 3 August 2016 (UTC)

Boltzmann's Avogadro's Gas Constant

((2.176470e-8 kg *(1.616229e-35 m)^2/(1.416808e+32 K *((5.39116e-44 s)^2) =(1.38064852e-23 m^2 kg s^-2 K^-1)

https://wiki.riteme.site/wiki/Boltzmann_constant


(1 / ((c^3) * ((1.616229e-35 meters) / (pi / (((1 / (2 * pi)) + 1)^0.5))) * ((5.39116e-44 seconds) / (pi / (((1 / (2 * pi)) + 1)^0.5)))))^0.5 = 6.02220471e+26

https://wiki.riteme.site/wiki/Avogadro_constant


((1 / ((c^3) * ((1.616229e-35 meters) / (pi / (((1 / (2 * pi)) + 1)^0.5))) * ((5.39116e-44 seconds) / (pi / (((1 / (2 * pi)) + 1)^0.5)))))^0.5) * 1.38064852e-23 = 8314.54802

https://wiki.riteme.site/wiki/Gas_constant


pi / (1 / (2pi) + 1) = 2.71024393443899972

Fuller.david (talk) 16:32, 25 September 2017 (UTC)

"2019 redefinition of SI base units"

Since the General Conference on Weights and Measures' conclusion to redefine the base units of measurements, I couldn't help but notice that this page hasn't updated the measurements/values to accommodate the new value, or at least mention it.

For those wondering what I'm talking about, the committee has defined fixed values for the Boltzmann constant (1.380649×10−23) and the Avogadro constant (6.02214076×1023) , and with the definition of the Boltzmann constant being "the gas constant divided by the Avogadro constant" , I would figure that the only remaining constant in that formula would also be defined with a fixed value (8.314 462 618 152 34 , if my math serves me right) — Preceding unsigned comment added by 72.238.8.48 (talk) 08:43, 29 November 2018 (UTC)

You have a small error in your number, the correct number value for R after the redefinition of the units is 8.314 462 618 153 24. 195.113.57.221 (talk) 10:43, 13 February 2019 (UTC)
R = 8.314 462 618 153 24 J/(mol K) will be the new correct value. I've just confirmed with NIST that R will be the product of the new defined values of the Boltzmann constant and the Avogadro constant. The change is scheduled to happen on May 20, 2019. I'd come here and make the updates to this article myself on that day, but I don't edit Wikipedia anymore. SimpsonDG (talk) 20:26, 8 April 2019 (UTC)