Talk:Fletcher–Munson curves
![]() | This redirect does not require a rating on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||||||
|
![]() | The contents of the Fletcher–Munson curves page were merged into Equal-loudness contour on 2019-05-21 and it now redirects there. For the contribution history and old versions of the merged article please see its history. |
Red and blue curves
[edit]What is the reason for the difference between the red and blue curves?--Light current 23:38, 2 April 2006 (UTC)
- Basically, experimental error. This is a difficult thing to measure. I give my own suggested reasons for the difference at Robinson-Dadson curves and Equal-loudness curves, but I have found no official speculation on the reasons. I have now copied across the reason from R-D curves.
Recording techniques
[edit]I am not happy with the section that was added on recording techniques, firstly because it does not belong here, on a page specifically about the F M curves, and secondly because it is wrong. The aim of the sound recording is primarily to recreate the original sound, and that means at the original level. While it has in the past been difficult or impractical to reproduce music at original levels, this is no longer the case, and if recordings were made with the intention that they were to be played back at low levels only, then they would sound harsh and bass-heavy when played in disco's or on top-quality audio installations, or even on iPods which tend to be used at high level. It is true that some engineers like to listen on monitor speakers that emulate typical low-end home systems, but they tend to do this as a secondary check that their balance sounds acceptable on such systems. The use of heavy compression also forms part of the commercial battle to get a 'punchy' sound, but many engineers condemn this trend, and aim to produce a recording that is as far as possible an unprocessed version of the original. In any case, this is about poor speakers, not low listening levels. Some domestic hi-fi systems, and car players have long incorporated a 'loudness' control, or option, which boosts bass and treble when the volume is turned down, and this it obviously the way to compensate without ruining the actual recording. The use of cardiod mics close up is also a technique to be condemned, as most cardiod mics have poor bass response and using them close up only produces an unquantifiable response which is likely to have 'boom' but still lack true low frequencies. The use of an omni with a flat response to 20Hz gives far better results, and tiny electret mics are ideal for use on bass-drums. --Lindosland 13:03, 15 September 2007 (UTC)
merge into equal-loudness contour
[edit]This stub-page could be merged into the main article (either as a subsection, or just slightly fleshing out the existing paragraphs of historical backgroun). This would assist navigation (since fewer readers would be exposed only to either one POVfork) and consolidate editing efforts. Cesiumfrog (talk) 00:52, 23 July 2014 (UTC)
I added merge proposal tags to the tops of the articles. I say go for it. X-Fi6 (talk) 21:22, 15 May 2018 (UTC)
Done ~Kvng (talk) 15:24, 21 May 2019 (UTC)
External links modified
[edit]Hello fellow Wikipedians,
I have just modified 2 external links on Fletcher–Munson curves. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20070927210848/http://www.nedo.go.jp/itd/grant-e/report/00pdf/is-01e.pdf to http://www.nedo.go.jp/itd/grant-e/report/00pdf/is-01e.pdf
- Added archive https://web.archive.org/web/20070927210848/http://www.nedo.go.jp/itd/grant-e/report/00pdf/is-01e.pdf to http://www.nedo.go.jp/itd/grant-e/report/00pdf/is-01e.pdf
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
An editor has reviewed this edit and fixed any errors that were found.
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 16:44, 1 January 2017 (UTC)
1933 vs 1937
[edit]The article says that Fletcher and Munson created the first equal-loudness curves in 1937, referencing a web page that references this wikipedia article (citogenesis?). The Fletcher-Munson curves are clearly part of their 1933 article (specifically, Figure 4). 193.171.142.149 (talk) 16:28, 8 March 2017 (UTC)
- I have removed the 1937 statement and its potentially circular reference. ~Kvng (talk) 13:53, 13 March 2017 (UTC)
External links modified
[edit]Hello fellow Wikipedians,
I have just modified one external link on Fletcher–Munson curves. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20060115001541/http://www.aist.go.jp/aist_e/latest_research/2003/20031114/20031114.html to http://www.aist.go.jp/aist_e/latest_research/2003/20031114/20031114.html
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 07:38, 2 October 2017 (UTC)