Jump to content

Talk:Electron-beam additive manufacturing

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Wrong terminology

[edit]

This article is written about EBM which is a powder bed fusion process using an electron beam and pre-placed powder. Electron beam addidive manufacturing (EBAM) however is a directed energy deposition process using an electron beam and wire. There should definately be two separate articles with the correct terminology.

Untitled

[edit]

there are two different pages on th topic 'Electron Beam Melting' both referrin to one and th same technique. difference in th title is the case, th othr one goes 'Electron beam welding'

-> the difference is effectively quite small. Electron beam welding refers to the "traditional" welding process and electron beam melting is proper to additive manufacturing and rapid prototyping (Arcam). — Preceding unsigned comment added by 213.224.27.206 (talk) 09:56, 29 July 2011 (UTC)[reply]

-> I cannot agree on that. Electron beam melting has been used for many years for casting ingots of titanium and other high melting point metals. The article's title should be changed into "Electron beam additive manufacturing", and a link to article "Electron beam technology" should be added. Alternately, the text of this page should be included in the article "Electron beam technology" itself, or in the article "Additive manufacturing". Lmdarius (talk) 14:21, 2 June 2013 (UTC)[reply]

-> Where's the source for the EBM turbine blades? y-TiAl page talks about casting. — Preceding unsigned comment added by 95.95.98.163 (talk) 03:14, 1 November 2013 (UTC)[reply]

[edit]

I'm collecting the 3D printing articles for electron beam processes into this article. There were three such articles, and each was basically an ad for one vendor's process. Collecting them up is more encyclopedic, allows a compare-and-contrast approach, and the applications are about the same. So, unless someone objects, Electron beam freeform fabrication will be merged into here. Electron beam melting and Electron beam direct manufacturing have already been merged. John Nagle (talk) 04:41, 16 October 2015 (UTC)[reply]

Electron Beam Melting and Electron Beam Freeform fabrication are fundamentally different

[edit]

EBM uses an electron beam to melt a powder bed of materials. EBFF uses a wire feed that is melted. They are in different ASTM classes of AM methods, and deserve their own pages. EBFF is more similar to Electron Beam Direct Manufacturing in that the objects being created do not have to adhere to the layer constraints of powder bed processes, and they both fall under the Directed Energy Deposition section of ASTM terminology. It would be more appropriate to merge those two articles than the former. [1] Sonicinema (talk) 22:55, 4 May 2016 (UTC)[reply]

References

  1. ^ http://www.astm.org/FULL_TEXT/F2792/HTML/F2792.htm
[edit]

Hello fellow Wikipedians,

I have just modified one external link on Electron beam additive manufacturing. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 07:22, 22 December 2016 (UTC)[reply]

[edit]

Hello fellow Wikipedians,

I have just modified 4 external links on Electron-beam additive manufacturing. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 03:34, 19 September 2017 (UTC)[reply]

System for recovering metal powders used in EBM additive manufacturing

[edit]

lol It's a repurposed sand blasting cabinet.

Retrieved from "https://wiki.riteme.site/w/index.php?title=Talk:Electron-beam_additive_manufacturing&oldid=1196693644"