Talk:Bronze/Archive 1
![]() | This is an archive of past discussions. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page. |
Archive 1 |
Density of Bronze
What is the density of bronze? Thanks, --81.86.68.253 (talk) 18:20, 24 February 2008 (UTC)
- According to this site, the densities for the following types of bronze are:
- Bronze, aluminum: 7.7
- Bronze, 7.9 - 14% Sn: 7.4 - 8.9
- Bronze, phosphor: 8.88
Phosphor bronze
Acoustic guitar strings and electrical components' contacts are often described to be plated with "phosphor bronze". Any information or references about this? --blades 00:05, May 16, 2004 (UTC)
Category
Does this need to be in the 'metals' category? It's already in alloys which is a subcategory of metals. -David 04:50, Oct 21, 2004 (UTC)
Harder vs. durable
Is there a difference between bronze being harder and more durable than stone or is the latter a consequence of the first? MarSch 13:15, 6 Apr 2005 (UTC)
Brass vs. Bronze
The brass article seems to imply that, while some brasses are called "bronze", this is incorrect:
Some types of brass are called bronzes, despite their high zinc content.
On the other hand, this article indicates that "bronze" is a general term for copper alloys, and therefore includes brass:
brass, a subset of the bronze alloys in which zinc is the principal additive
I am not qualified to judge which of these is correct, but they seem to contradict each other.
Similar comment posted on Talk:Brass.
— Nowhither 00:20, 25 August 2005 (UTC)
- I guess its a wide/narrow use of the word. The narrow definition is bronze=Copper+tin+(impurities). The wide definition is of Copper+something. dic def Zeimusu | Talk page 13:18, 2005 August 25 (UTC)
In France you may call your casting bronze as long as it has a 60% copper content. They tend to call this artisan bronze in the UK as it is more brassy in colour, although not quite as yellow as brass. It is true that English bronze is much darker in colour. The reason for the difference between the English and French bronze is that the French would and still do in some cases, chisel, or chase the hardware, etching in the details that traditional sand casting would lose. Lost wax casting tends to mend the loss in detail, although, the chasing adds to the allure as it is handmade, and the imperfections are apparent and appreciated. Superfinicky —Preceding undated comment was added at 21:19, 19 January 2009 (UTC).
There is some good info here: http://www.metalcastingdesign.com/content/view/108/203/ For example: Bronzes "Bronze is an imprecise term. It originally referred to alloys in which tin was the major alloying element. Under the UNS system, the term bronze (C86100 to 87800, C90200 to C95900) applies to a broad class of alloys in which the principal alloying element is neither zinc nor nickel. Nevertheless, bronze is the common name for a number of alloys that contain little, if any, tin." —Preceding unsigned comment added by 74.237.247.85 (talk) 01:31, 2 May 2009 (UTC)
Bronze vs. Iron
I thought bronze is weaker than iron. What causes this difference? 66.195.132.2 13:06, 18 October 2005 UTC
- To make it easier for others to follow you, please sign your comments with four tildes: ~~~~ Thanks.
- Bronze is stronger than simple iron, but weaker than carburized iron. In the ancient period, therefore, bronze was stronger but more expensive than iron. As ironworking techniques improved, iron took over bronze, being both cheaper and stronger. Also, unless I'm mistaken, bronze has a lower melting point than iron and is therefore easier to cast, but harder to forge due to its greater hardness. —Simetrical (talk) 20:47, 18 November 2005 (UTC)
- Regarding:
- Bronze was also stronger than iron, another common metal of the era,...
- This does not sound right to me - to which era is the article refering? I guess that there might have been a period in the late bronze age when small amounts of iron were being used and this iron may been weak due to impurities etc. I would like see some cites for this. Bronze has a much lower melting point than iron and it was quite impossible for the ancients to cast iron. Bronze is far more maleable that iron and bronze artifacts sometimes have beaten details that could never have been achieved in iron. See Yetholm-type shields for example.
- Regarding the statement:
- As an example, Roman officers were equipped with bronze swords while foot soldiers had to make do with iron blades.
- To what period of Roman history does that apply?
- Another questionable statement:
- Bronze also has very little metal-on-metal friction, which made it invaluable for the building of cannon where iron cannonballs would otherwise stick in the barrel.
- Bronze is often used for bearings, but I don't think that has anything to do with cannons. Early cannons did not fire tight-fitting balls which were, in any case, often made of stone. If the above is true, why arn't modern guns which do have tigh-fitting ammunition, made of bronze? My understanding is that early cannons were made of bronze because of the adaptation of bell casting techniques were the only practical method available.
- Methinks this article needs some work... Gaius Cornelius 01:08, 23 November 2005 (UTC).
- I agree with Gaius Cornelius. Although I found evidence that when lubricated, brass has a lower coefficient of friction (in contact with steel) (see http://www.carbidedepot.com/formulas-frictioncoefficient.htm) when clean, cast iron has a lower coefficient of friction (in contact with cast iron) (see http://www.engineeringtoolbox.com/friction-coefficients-d_778.html) Kiujhytg2 —Preceding undated comment was added at 18:01, 6 October 2008 (UTC).
- Methinks this article needs some work... Gaius Cornelius 01:08, 23 November 2005 (UTC).
This says that "Iron is not superior to bronze for tools. Wrought iron, the form first encountered by Near Eastern smelters, is roughly equivalent in hardness to annealed 10% tin bronze, and inferior to all cold-worked tin bronzes. It is only when carbon dissolves into the iron (carburization) and the artisan quenches the resulting steel that ferrous metals have a definite hardness advantage over bronze." No mention of when carburization was discovered, though, do you know? Partial carburization was certainly possible during early-mid Roman times, but I don't know at what point iron surpassed bronze in price or strength. —Simetrical (talk) 02:27, 23 November 2005 (UTC)
Well, when you take into account that the period where 90% of the tools were iron was in the 10th century BC, I think we can safely say that bronze was surpassed by iron in terms of cost at that point, and hardness equality would follow. This is long before even the beginnings of a Roman Senate, so I seriously doubt that Roman officers (Centurions or whathaveyou) were equipped with bronze weapons when the Romans did have access to steel, and used it in their swords. It is also my opinion (and only that) that (HC) steel is a superior sword material because once properly tempered it has good edge retention but is still nice and springy.
As far as cold-working bronze vs iron goes, I can safely assume that would create alot of stresses in the metal (it does so for iron or steel, anyway), making it very hard, yes, but very brittle too. That is not the sort of thing you want in a tool like a scratchplough or a nail. Instead, toughness is much preferred. Alej
- Wrought iron is weaker than bronze, but bronze is weaker than steel (which is an alloy of iron with between 0.02% and 1.7% carbon). People often get this confused, because they don't distinguish between wrought iron and steel (they just refer to both as iron). I have made changes to this article and several others to avoid confusion on this subject. Note that people made tools from bronze before they figured out how to make them from iron because iron's melting point is higher than that of bronze or its components, which makes it more difficult to make tools from iron. Then eventually they switched from the bronze age to the iron age, in which most things were made from wrought iron, despite the fact that it was weaker than bronze. But they only switched because iron was more common and cheaper, and even after they switched, the best things were still made out of bronze (or better yet, steel, although steel was difficult to produce with the methods available at the time). - Shaheenjim 19:11, 14 June 2007 (UTC)
Regarding the statement that "bronze is stronger (harder)[2] than wrought iron", where reference [2] is a link to this PDF: I believe the document in question does not support that claim. It appears to state that, aside from the inferior early "unintentionally alloyed" bronzes, wrought iron and "highly alloyed" bronze were roughly similar in terms of hardness (see figure 2). I'm not disputing the claim, merely suggesting that the reference is incorrect. I'll replace it with a 'citation needed' tag. — Wisq (talk) 20:28, 6 February 2008 (UTC)
Composition
This article does not contain the usual composition of bronze, which a quick google:define turns up as 60% copper to 40% tin. I'll pop this up.
80.2.26.219 20:29, 18 November 2005 (UTC)
- That sounds like far too much tin. Anything around 10% tin would be considered a high-tin bronze. 62.239.24.22 13:16, 24 November 2005 (UTC)
That composition would be Speculum which was used for coin making in Roman times (in Gaul and Britain anyway)
--Nomiro 11:25, 9 November 2006 (UTC)
40% is way too high. The (approx.) 23% tin of the bronze used in Indonesian gamelan and the similar tin content of bell metal are the highest tin contents in regular use, apart from speculum metal. In engineering applications, 18% tin is around the upper limit for a high-tin bronze. 40% tin is therefore not 'typical'. There is really too much variation among bronzes for any 'usual composition' or 'typical' figure to be given. And brasses and bronzes are two separate families of copper alloys. EEye 12:04, 27 March 2007 (UTC)
Surely, both the ancients and moderns used lead along with the well known copper tin-alloy. Lead makes for easier casting and in modern times, easier machining. 10% seems common, more or less is less common.--Alphasierra (talk) 22:28, 13 September 2008 (UTC)
[random Wikipedia user]: What I'm really missing in this article is details about what composition refers to: 88% copper + 12% tin (for instance) doesn't mean jack s**t unless you know what the unit is. Are we talking specific weight, volume, molarity or what? Not to put Wikipedia to shame, I can't find this information readily available anywhere else either so it may well be lack of basic education on my part, still useful information though. 87.96.196.64 (talk) 18:54, 19 May 2010 (UTC)
- Please see alloy. It's usually measured in percent mass. Wizard191 (talk) 18:37, 20 May 2010 (UTC)
Patina vs. oxidation
I am quite sure that the patina of bronze is formed by oxidation, so the statement "While bronze forms a patina, it does not oxidize" is incorrect. Will someone else confirm this?
- Patination composition varies with the reacted elements and will determine the color of the patina. Exposure to chlorides leads to green, while sulpher compounds (such has "liver of sulpher") tend to brown. Patination is deliberately accellerated by heat. Colors range from matte sandstone yellow to deep blues, reds and various blacks, sometimes with the surface sheen enhanced by waxing for artwork displayed indoors. - Leonard G. 18:44, 31 December 2006 (UTC)
Patinating bronze is a process of heating the bronze up and applying a patina which is absorbed by the porosity of the metal, which once cooled down, fuses with the surface, thereby accelerating what would be a natural process. There are some who apply oil based patinas without heating the metal, which leaves a patinated look, without the oxidization. This is more of a superficial attempt at antiquing a casting. Another way would be to drop the piece in acid and let the acid eat away, oxidizing the surface. This may leave a greyish hue on the surface which can be degraded using steel wool. You will still need to heat the castings in order for the surface oxidization to fuse with the metal. This further changes the colour, and brings you back to a more brownish bronze. Superfinicky —Preceding undated comment was added at 21:26, 19 January 2009 (UTC).
Expanding slightly just before they set?
"Common bronze alloys often have the unusual and very desirable property of expanding slightly just before they set, thus filling in the finest details of a mould"
I don't think this is true. Has anyone a source? As far as I know, liquid to solid shrinkage of about 5% occurs with copper and most of it's alloys. This can be offset by regulating the oxygen content which will allow microscopic bubbles to form, which will offset some of the shrinkage. But I don't think you can get it to expand....
--Nomiro 11:15, 9 November 2006 (UTC)
The addition of Bismuth to the bronze will produce an alloy that will expand upon cooling, as that is one of the properties of Bismuth. Like water, Bismuth is one of the few known substances which is more dense in its liquid state than solid. There is evidence of a bronze with 18% Bismuth content cast by the Incans for just that purpose, a handle secondarily cast onto a dagger. [1]Bg2 (talk) 02:18, 11 January 2009 (UTC)BG2
A list of civilizations
It would be good to list civilizations and their usage of bronze.--HalaTruth(ሀላካሕ) 08:25, 31 December 2006 (UTC)
Etymology
The etymology of "Britain" here given seems spurious - the cited page makes no mention, and the only other references I can find on the 'net (don't have any books handy) are mirrors of Wikipedia. Identical line in Brython, removing both. - Somnior 21:21, 30 January 2007 (UTC)
Proposed project
There is evidently no extant WikiProject which deals with articles concerning alloys and other chemical compounds. This could be a problem, as many of these articles deal with what are considered to be generally important topics. To correct this situation, I have proposed a project to deal with these articles at Wikipedia:WikiProject Council/Proposals#Chemical compounds and mixtures. Anyone interested in contributing to such a project should indicate as much there. Thank you for your attention. John Carter 20:35, 28 April 2007 (UTC)
Roll back of precision
My correction to one part of this article was rolled back on the grounds that the original was more precise and still true. I have read through all these comments and find that arguements against many of the things I pointed to exist here. My change was more precise and included a citation and the editor said he did not understand why I did it when it was explicitly stated in the remark: Every single following paragraph contradicted the summary statement at the beginning. After my experience with a Glass posting where a totally wrong statement was preserved by some vulture watching it, I am certainly not going to waste my time on this. One of the reasons the 1911 Encyclopedia Britanica is famous is becouse the articles were written by people who did the original research. Yet Wiki has no mechanism for publication by authorities who must be published elsewhere and hopefully referenced here, if not taken off. Silly. Mike1942f 01:49, 1 July 2007 (UTC)
- For other people, note that the thing he changed, which I reverted, said, "With the exception of steel, bronze is superior to iron in nearly every application." I don't see which of the things in the following paragraphs he thinks contradict that. The following paragraphs don't even mention iron again, except for one time. And that's only to say that iron doesn't make for good cannonballs. That supports the thing he changed, it doesn't contradict it. - Shaheenjim 09:40, 1 July 2007 (UTC)
Information Taken From Bronze-Statues.us
I've found that much of the info in the 'Properties' section of this page comes from the following webpage:
http://www.bronze-statues.us/bronze_q.html
Ought this to be removed? Much of it seems to be questionable/unsourced. Markekeller (talk) 03:34, 15 May 2008 (UTC)
- Ummm, that page is very obviously an automatically-generated spamfarm. Chris Cunningham (not at work) - talk 18:43, 21 December 2008 (UTC)
External links removed as spam
I'm all for removing clear spamlinks, but I think that two of the links recently removed by Vsmith provide solid "for further reading" information. I propose to bring back 19th-century bronze sculpture sand casting because it provides many interesting tidbits that don't necessarily belong in the main WP article, and "Flash animation of the lost-wax casting process". James Peniston Sculpture. {{cite web}}
: Cite has empty unknown parameters: |1=
and |coauthors=
(help), which offers a good animated primer on casting bronze. I'd also delete "Lost Wax, Found Bronze": lost-wax casting explained as redundant and not terribly well done. PRRfan (talk) 14:50, 31 December 2008 (UTC)
- Bronze.galleries.com and the James Peniston sites are commercial sites selling statues and books - promotional. The wildlifeart.org is a noncommercial site. Please see WP:EL. Vsmith (talk) 00:27, 1 January 2009 (UTC)
- As you no doubt know, WP:EL has no blanket prohibition on links to commercial sites; instead, the guidelines are more subtle. They allow, for example, links to unique content that cannot (for copyright or other reasons) be replicated on WP. The James Peniston animation is such a piece of content. I don't know of any site, commercial or otherwise, that offers such a clear explanation of the casting of bronze. The argument for bronze-gallery.com may be a bit weaker; to paraphrase WP:EL, much of its content could appear in the Bronze article if it were expanded to Featured Article quality. But it also contains plenty of facts about bronzework that are likely too picayune for WP, yet potentially of interest to those who visit the article. PRRfan (talk) 01:25, 1 January 2009 (UTC)
- The animation is linked at Bronze sculpture where it is more relevant than this general bronze article. If others feel the gallery site is needed here - OK (also more relevant on the sculpture article), I'm wary of commercial promotion links and tend to reject sites that hawk their products - even if otherwise informative. Vsmith (talk) 01:46, 1 January 2009 (UTC)
Source found, sortof, for Bronze being harder than Wrought Iron.
Searching for a source on bronze being stronger than wrought iron, I came across this article: Ancient Blacksmiths, the Iron Age, Damascus Steels, and Modern Metallurgy. It includes a chart (figure 2, at the end of the pdf) that demonstrates that lists Cold or Warm forged bronze is better than annealed iron, but that's not quite the same thing as saying "bronze" as a whole, is "better (harder) than iron". I'm not a metalurgist or a historian myself, so I don't fully understand the timeline of metal quality given here. Could someone help out a bit here? Fieari (talk) 02:00, 2 January 2009 (UTC)
Spotted weasel word
Under "Properties", it reads that "Bronze can be superior to iron in many applications". It's not specified, though, what "many" includes - it looks to me like a weasel word. Since I'm not an expert on the subject, I'm hesitant to edit it myself...does anyone else have an opinion on the matter? 76.71.34.180 (talk) 00:37, 1 June 2009 (UTC)
- Hmm. Different metals have different useful properties, it's true. Sintered bronze roller bearings can absorb lubricants and release them under pressure, for instance. But iron makes much better magnets. Blanket statements that material X is "superior" to material Y are not useful if we do not know the intended use, in my opinion.
Copper Dispute?
Found a comment in the article: "<!-- Disputed - Copper? => (of which Ötzi the Iceman's axe is an example)-->". I thought he was accepted to be simply chalcolithic/copper age. Is this actually disputed? My first thought was to remove it, but I didn't want to interfere in a dispute. ― Darekun (talk) 21:21, 15 July 2009 (UTC)
Nickel in stainless steel?
From the main article:
"The cost of copper-base alloys is generally higher than that of steels but lower than that of nickel-base alloys such as stainless steel."
Perhaps there is something I have failed to understand, but I was under the distinct impression that stainless steel, when we view this alloy family in the aggregate, is primarily iron, containing perhaps 10%, more or less, chromium. How many stainless steel alloys in common use contain nickel at all? How is stainless steel a "nickel-base alloy?"
- Quite right. I've removed the stainless steel example. Wizard191 (talk) 16:05, 16 November 2009 (UTC)
Brown
Is bronze always brown? This article, strangely enough, makes no mention of what bronze looks like, but the bronze I've seen has always been varying shades of brown (unless it is corroded). How do the different alloying elements (tin, bismuth, arsenic, etc.) affect the color of the bronze? Stonemason89 (talk) 18:32, 14 December 2009 (UTC)
Materials infobox
I'd like to see something along the lines of a materials info box for bronze. I realize there is no one exact "bronze", but perhaps some properties such as melting point, boiling point, color/appearance, density, hardness, friction, electrical/thermal conductivity, etc for a variety of different compositions would be nice. Kaldosh (talk) 11:30, 2 March 2010 (UTC)
- That's not really possible because there is a HUGE range of properties available for different bronzes. To pick just one would be very misleading for other types. Wizard191 (talk) 13:56, 2 March 2010 (UTC)
Zildjian? Really?
Can we lose the crap about the Zildjian legend? It's obviously nonsense since further down the page they mention that the Indonesians had been building bronze percussion instruments for over 2000 years? 99.34.228.199 (talk) 18:35, 7 May 2010 (UTC)
- I removed it. Wizard191 (talk) 19:30, 7 May 2010 (UTC)
Arsenic
I've removed the implication that arsenic bronzes are necessarily naturally occurring - it's highly contentious, and outside of Mesopotamia (e.g. in Pre-Colombian America), almost certainly untrue. -Spikeyi
Does Bronze oxidize
This article indicates that Bronze does not oxidize, which, according to the Historical Preservation Technical Procedures index (http://w3.gsa.gov/web/p/hptp.nsf/035c614b995c0406852565d1006211b3/6c8c800d5618e023852565c50054b2c6?OpenDocument), is not true. The patina that bronze develops is part of the oxidization and sulphurization process--not a replacement of it.
English
"Bronze" is English, but not that anciently. I've modified the statement.
Origins
The Bronze Age article states that bronze was developed by the Maykops (see Maykop culture). Is there a reason why this article states differently? --Brunnock 14:05, 2 February 2006 (UTC)
The article says - Phoenician traders visited Great Britain to trade goods from the Mediterranean for tin.[citation needed]- Quite right, a citation is needed and some evidence that the Phoenicians did any such thing. --Alphasierra (talk) 22:38, 13 September 2008 (UTC)
I shifted my remarks upon "History" here because it addresses the same topics:
Up to now, it is in fact in no way proven that Phoenicians ever visited Cornwall for trading tin. HJJHolm (talk) 16:37, 9 August 2009 (UTC)
Further, we urgently need serious attestations for the dates of earliest use. HJJHolm (talk) 07:16, 20 September 2010 (UTC)
Romans did not use bronze swords. [2] Perhaps that is why no citation has turned up? However, in republican times the romans still used bronze helmets [3] — Preceding unsigned comment added by 93.104.78.10 (talk) 15:48, 24 June 2013 (UTC)
Bronze in piano strings
According to the piano article of Wikipedia bass strings are wrapped with copper. That is what I though but I'm not confident enough to edit this. —Preceding unsigned comment added by 80.100.243.19 (talk) 12:40, 18 October 2010 (UTC)
Musical Instruments: timbre of cymbals and bells - deletion recommended.
I think the line: As the tin content in a bell or cymbal rises, the timbre drops.[11]" could be deleted as it doesn't make sense to me. Timbre is the characteristic of a sound which makes it distinct from other sounds: it is not something that rises or drops. —Preceding unsigned comment added by 121.223.162.32 (talk) 03:04, 13 August 2010 (UTC)
Seconded. Total garbage.208.89.21.34 (talk) 15:26, 1 November 2010 (UTC)
Zinc
There's a lot of zinc in the bronze on this page. Shouldn't that be tin? As far as I know, zinc-copper alloys are called brass, not the same at all. Andi d (talk) 16:41, 2 September 2012 (UTC)
Cannon
Historically, a lot of bronze has been made into cannon. I think this should be mentioned. J S Ayer (talk) 01:14, 9 April 2013 (UTC)
Assessment comment
The comment(s) below were originally left at Talk:Bronze/Comments, and are posted here for posterity. Following several discussions in past years, these subpages are now deprecated. The comments may be irrelevant or outdated; if so, please feel free to remove this section.
I have a cuestion to the experts:
I would like to know if during the Old Kingdom, in the life of Keophe, the egiptyan workers used bronze levers Thanks in advance My name is José Miguel de Prada, Full professor in the Escuela Superior de Arquitectura de la Universidad Politécnica de Madrid My email adress is josemiguel.deprada@gmail.com |
Last edited at 14:08, 25 August 2008 (UTC). Substituted at 14:26, 1 May 2016 (UTC)
Latten is: what ?
Introduction: 1st para, last sentence: "Historically the term latten was used for such alloys." Which alloys ? The context leaves it unclear whether latten refers to bronze or copper alloys. Please would someone knowledgeable correct this ? Thanks. Darkman101 (talk) 05:46, 17 December 2013 (UTC)
Bronze Statues
The subsection on bronze statues contains the following sentence:
Bronze sculptures, although known for their longevity, still undergo microbial degradation; such as from certain species of yeasts.
Following the link that was provided and searching the article on the other end, the only reference that I could find was a species of yeast that grows on modern plastic coatings put protectively on ancient bronze statues. There is nothing about the yeast attacking the bronze itself. I propose that this sentence and the accompanying reference be totally removed, since the statement is fictional and the linked article contains absolutely no information about bronze itself. — Preceding unsigned comment added by Lakewind Writing (talk • contribs) 18:07, 1 February 2014 (UTC)
Nitpick: Serbo-Croatian name for bronze
As it currently stands in the article:
early Persian birinj, biranj (برنج) "brass" (modern berenj), piring (پرنگ) "copper",[4] from which also came Serbo-Croatian pìrinač "brass",[5] Georgian brinǰao "bronze", Armenian płinj "copper".
Note that Pirinač means "rice" in Serbian. The correct word is "bronca" in Croatian, and "Bronza"/" Бронза " in Serbian.
See: http://hr.wikipedia.org/wiki/Bronca , http://sr.wikipedia.org/wiki/Бронза
--93.139.154.157 (talk) 08:59, 22 April 2014 (UTC)
Properties
The statement "Bronze is considerably less brittle than iron." was nonsensical. I have deleted it. Pure iron is extremely flexible and ductile. However, this leaves the article without a coherent description of the mechanical properties of bronze, which were life-changing and of major importance for human cultural and economic development. Bronze Age refers. Can anyone contribute factually accurate information here?? Plantsurfer (talk) 23:03, 9 November 2012 (UTC)
- The metallurgy of iron and steel is quite complex and outside the scope of this article, but the above deleted statement was more or less correct. While pure elemental Fe is technically called "iron" and is, as you stated, quite soft and ductile, few people outside of a metallurgy or chemistry lab are referring to pure elemental Fe when they talk about "iron". When people speak of "iron", the material they are most often referring to is actually "cast iron" or "pig iron", which is an alloy of Fe with at least 2.1% carbon. Elemental Fe with between 0.002% and 2.1% carbon is referred to as "carbon steel". Once the carbon content goes over 2.1% the alloy is no longer referred to as steel, and it is again referred to as some kind of iron. Cast iron and pig iron are very brittle. A more syntactically correct statement would be that "Bronze is considerably less brittle than cast iron". I have restored a more informative version of the above deleted statement using "cast iron" rather than just "iron".Gcronau (talk) 07:29, 19 August 2015 (UTC)
The wording about bronze being harder than wrought iron is wrong. Better source here. Arlosuave (talk) 04:21, 1 May 2013 (UTC)
Wikipedia technical problem: location of photographs
The problem apparently is general. Specifically, the photos for the "Musical instruments" subsection, in the editing layout of the text, are placed right below the subsection title. However, in the published text, they are located very clumsilly in the "See also" section. I tried to 're-set' the layout (by removing, then re-inserting the photos), but that simple fix didn't work. Elfelix (talk) 19:40, 24 October 2015 (UTC)
- Too many photos, especially tall ones. but I have squeezed them in. Johnbod (talk) 20:02, 24 October 2015 (UTC)
External links modified
Hello fellow Wikipedians,
I have just modified one external link on Bronze. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20140811002147/http://www.sax.co.uk/signature-custom-alto-sax-phosphor-bronze-big-bell.ir to http://www.sax.co.uk/signature-custom-alto-sax-phosphor-bronze-big-bell.ir
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 22:09, 12 June 2017 (UTC)
External links modified
Hello fellow Wikipedians,
I have just modified 2 external links on Bronze. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20150402174311/http://m.friendfeed-media.com/450c6f3cdc92be9e19ecd285bd7f809a9ae1d4d5 to http://m.friendfeed-media.com/450c6f3cdc92be9e19ecd285bd7f809a9ae1d4d5
- Added archive https://web.archive.org/web/20061216180940/http://www.msm.cam.ac.uk/phase-trans/2005/bell/bell.html to http://www.msm.cam.ac.uk/phase-trans/2005/bell/bell.html
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 13:57, 2 August 2017 (UTC)
Is bronze a periodic table element or compound metal?
Bronze is an element replacing copper, per IUPAC. — Preceding unsigned comment added by 2601:241:200:5F55:91A0:3A63:9505:B99A (talk) 20:26, 5 June 2017 (UTC)
Umm, this section doesn't make sense, bronze is an alloy not an element. DaveShack (talk) 22:29, 15 September 2018 (UTC)
- ^ Gordon, Robert.B.,and Rutledge, John W. "Bismuth Bronze from Machu Picchu, Peru"
- ^ http://wiki.riteme.site/wiki/Gladius
- ^ http://wiki.riteme.site/wiki/Montefortino_helmet