Jump to content

Stevens Boys Rifles

From Wikipedia, the free encyclopedia

Stevens Boys Rifles
TypeSingle-shot
Place of originUnited States
Production history
DesignedPrior to 1890
ManufacturerStevens Arms
Unit cost
$2.25 (in 1902) equivalent to $80 in 2020 (Crack Shot).
$4.00 (in 1902) equivalent to $140 in 2020 (Favorite).
$7.00 (in 1902) equivalent to $250 in 2020 (Ideal).[1]
Produced1890–1943[2]
No. built~250,000[3]
VariantsSee Variants
Specifications
Mass3.35 lb (1.52 kg) (Crack Shot, 20 in barrel)[4]
Barrel length20 in (508.0 mm) Round barrel (Crack Shot)
24 in (609.6 mm) 13 Octagon barrel (Favorite)[4]

Cartridge.22 Short (Favorite)
.22 Long Rifle (Crack Shot, Favorite)
.25 Rimfire, (Favorite)
.32 Rimfire (Favorite)
ActionFalling-block action[4]
SightsOpen front and rear sights, non-adjustable (Crack Shot, Favorite)
Rear peep and globe front sights (Favorite)[4]

The Stevens Boys Rifles were a series of single-shot takedown rifles produced by Stevens Arms from 1890 until 1943. The rifles used a falling-block action (sometimes called a tilting-block, dropping-block, or drop-block) and were chambered in a variety of rimfire calibers, such as .22 Short, .22 Long Rifle, .25 Rimfire, and .32 Rimfire.[2][4]

History

[edit]
Patent No. 1,059,477 illustrating the lever mechanism used on Stevens Boys Rifles after 1912.

In 1890, Stevens Arms released its first "Boys Rifle" (a term referring to an inexpensive rifle marketed towards children) known as the Crack Shot. This rifle would undergo at least two revisions during its production lifespan. At its introduction, the breechblock was actuated with a lever found on the side of the rifle, a system that would remain on the Crack Shot until 1912. At this point, a new version of the Crack Shot (designated the No. 26) was produced, featuring both a redesigned action and the familiar under-lever.[5] The Crack Shot would remain unchanged until produced ceased in 1939, with the exception of a brief production run of a modified Crack Shot in 1943.[6]

In 1902, Stevens Arms filed a patent for the takedown mechanism that would be used on the Boys Rifles.[7]

The No. 14 Little Scout was produced from 1906 to 1910,[8] during which time one shortcoming of the Boys Rifle design was addressed: the rifles were only initially equipped with an extractor, but no ejector. This meant that a casing would be partially removed from the chamber upon actuation of the lever, but would not be ejected out of the chamber and away from the rifle. Instead, the user was required to remove the casing from the chamber with their fingers. In 1909, a patent from Stevens Arms sought to remedy this with the inclusion of an ejector proper which would quickly and sharply snap rearwards to throw an empty cartridge out of the chamber.[9]

Design

[edit]
Patent drawing of the takedown mechanism used on Stevens Arms Boys Rifles.

The Stevens Boys Rifles were all similar in that they were single-shot rimfire rifles with falling-block actions and could be easily taken down into two-halves with the removal of a knurled thumb screw on the bottom of the receiver.[6] The rifles were equipped with an oval-shape walnut or walnut-varnished stock and steel butt plate.[10]

Models

[edit]

A wide number of different models and variations of Boys Rifles were produced over their production lifespan.

Model Name Available caliber(s) Barrel Length Twist Rate Notes Production Date
No. 12 Marksman .22LR, .25 Rimfire, .32 Rimfire 22 in (558.8 mm) barrel[8] 1:25" [11] (.22LR)
No. 14 Little Scout .22RF 18 in (457.2 mm) round barrel " One-piece slab stock 1906 to 1910[8]
Little Scout No. 1412 " 18 in (457.2 mm) or 20 in (508.0 mm) barrel " Open rear sight with front blade sight. Forearm is small and tapered.
Crack Shot .22LR, .32 Rimfire 20 in (508.0 mm) round barrel " Early model that actuates the falling-block by means of a side-lever instead of an under lever.[6] 1890–1912[6]
Crack Shot No. 26 .22LR, .32 Rimfire 18 in (457.2 mm) or 22 in (558.8 mm) barrel. " Later model of the Crack Shot that uses the under lever that would be ubiquitous on all subsequent Stevens Boys Rifles.[6] 1912–1943[6]
Crack Shot No. 2612 .22LR Shot Cartridges, .32 Rimfire Shot Cartridges " N/A Same as Crack Shot No. 26 but with a smoothbore barrel. Intended for shot cartridges.
Favorite No. 17 .22LR Shot Cartridges, .32 Rimfire Shot Cartridges 24 in (609.6 mm) round barrel 1:25"[11](.22LR) Open rear sight, Rocky Mountain front sight. Plain stock with straight-grip. Forearm is small and tapered. 1894–1935[12]
Favorite No. 18 " " " Same as Model 17, but sights consist of a Vernier peep sight, leaf middle sight, and Beach combination front sight.[13]
Favorite No. 19 " " " Same as Model 17, but sights consist of a Lyman combination rear sight, leaf middle sight, and Lyman front sight.
No. 20 Favorite " " N/A Same as Model 17, but featured a smoothbore barrel.
No. 27 Favorite " 24 in (609.6 mm) octagon barrel 1:25"[11] (.22LR) Same as Model 17, but with an octagon barrel.
No. 28 Favorite " " " Same as Model 18, but with an octagon barrel.
No. 29 Favorite " " " Same as Model 18, but with an octagon barrel.
No. 71 Favorite .22LR 22 in (558.8 mm) full octagon barrel[4] " Open rear sight, brass front blade sight. Straight-grip stock with Schnabel forend and commemorative brass medallion inlaid in the stock. Brass crescent-shaped buttplate.[12]

Safety

[edit]

Use of high-velocity ammunition

[edit]

Because the Stevens Boys Rifles predate modern high-velocity ammunition such as CCI Stingers and Velocitors, it is conceivable that the actions were not designed or intended to be used with any ammunition producing a chamber pressure beyond what was in use at the time of their invention. Using ammunition that produces a higher chamber pressure than an action is capable of withstanding could lead to damage to the firearm, or even a dangerous and catastrophic failure of the action.[citation needed]

Excessive headspace

[edit]

Rifles of this kind (including for example the BSA No. 12/15 and 15) can develop excessive headspace due to gradual wear on the locking shoulders of the breechblock and the locking arms on the finger lever.[14] This results in an action that does not close tightly, therefore failing to support the (typically brass) cartridge case properly. Cases that are unsupported are free to expand beyond their intended dimensional limit, leading to weakened, deformed, or even ruptured casings. The rupturing of an unsupported case releases hot, high pressure gases rearward towards the shooter and bystanders, leading to serious injury or even death.[15]

References

[edit]
  1. ^ "Farm and Fireside". Farm and Fireside. P.M. Mast & Co. 1902. p. 40. Retrieved October 21, 2021.
  2. ^ a b Wilson, Royce. "Boy's own adventure: The Stevens Favourite rifle". Straight Shooting. Archived from the original on October 21, 2021.
  3. ^ De Hass, Frank (December 1983). Mr. Single Shot's Gunsmithing Idea Book. Tab Books. p. 8. ISBN 9780830601110. Retrieved October 22, 2021.
  4. ^ a b c d e f "Charles E. Tisdal Sporting Goods Catalogue". Charles E. Tisdal Sporting Goods Catalogue. 1903. p. 6. Retrieved October 21, 2021.
  5. ^ US 1059477, Lewis, George S., "Firearm", published 1913-04-22, assigned to J. Stevens Arms and Tools Co. 
  6. ^ a b c d e f Wood, J.B (1978). Troubleshooting Your Rifle And Shotgun. pp. 152–155. ISBN 9780695811983.
  7. ^ US 761463, Fay, Charles P., "Breech-loading firearm", published 1904-05-31, assigned to J. Stevens Arms & Tool Co. 
  8. ^ a b c Gun Trader's Guide To Rifles. Skyhorse Publishing, Inc. 2013. p. 174. ISBN 9781626360266. Retrieved October 25, 2021.
  9. ^ US 939142, Lewis, George S., "Firearm", published 1909-11-02, assigned to J. Stevens Arms & Tool Co. 
  10. ^ "Stoeger Arms Catalogue". 1944. {{cite magazine}}: Cite magazine requires |magazine= (help)
  11. ^ a b c Collins, A. Frederick (1917). Shooting For Boys. New York, Moffat, Yard and Company. pp. 70, 197. Retrieved October 22, 2021.
  12. ^ a b Gun Trader's Guide To Rifles. Skyhorse Publishing, Inc. 2013. p. 159. ISBN 9781626360266. Retrieved October 25, 2021.
  13. ^ Gun Trader's Guide To Rifles. Skyhorse Publishing, Inc. 2013. p. 178. ISBN 9781626360266. Retrieved October 25, 2021.
  14. ^ De Hass, Frank (December 1983). Mr. Single Shot's Gunsmithing Idea Book. Tab Books. p. 59. ISBN 9780830601110. Retrieved October 22, 2021.
  15. ^ Davis, William C., Jr. Handloading (1981) National Rifle Association pp.67–69 ISBN 0-935998-34-9