Iron and steel industry in the United States
 | Parts of this article (those related to 2018 tariffs) need to be updated. (November 2018) |
| This article is part of a series on the |
| Economy of the United States |
|---|
 |
In 2022, the U.S. was the third-largest producer of raw steel worldwide, after China and India, and ranked sixth in pig iron production. By November 2024, the industry produced over 74 million net tons annually.
The industry produced over 74 million net tons per year as of November 2024.[1] Most iron and steel in the United States is now made from iron and steel scrap, rather than iron ore. The United States is also a major importer of iron and steel, as well as iron and steel products.
Employment as of 2014 was 149,000 people employed in iron and steel mills, and 69,000 in foundries. The value of iron and steel produced in 2014 was $113 billion.[2] About 0.3% of the US population is employed by the steel industry.[3]
As of 2022, major steel-makers in the United States included Cleveland-Cliffs, Carpenter Technology, Commercial Metals Company, Nucor, Steel Dynamics, and U.S. Steel.[4]
Types of steel mills
[edit]Steel mills in the U.S. fall into two categories: traditional integrated mills that process iron ore into steel and mini-mills that melt steel scrap to produce new steel. Mini-mills now dominate U.S. steel production.
Integrated steel mills
[edit]In 2017, there were 9 operating integrated steel mills in the United States (plus one idled), down from 13 in 2000. Integrated mills produced 31% of the steel produced in the US.
In an integrated steel mill, iron ore is reduced to metallic iron. In the US, this is done in blast furnaces and since 2014 again using direct reduced iron furnaces in Nucor's plant in Louisiana as well as another DRI plant (producing a compactified version of DRI called hot briquetted iron, or HBI) in Texas by Voestalpine. Some of the iron from the blast furnaces is converted to steel; today this is done in basic oxygen furnaces. Iron ore, coke, and flux are fed into the blast furnace and heated. The coke reduces the iron oxide in the ore to metallic iron, and the molten mass separates into slag and iron. Some of the iron from the blast furnace is cooled, and marketed as pig iron; the rest flows into basic oxygen furnaces, where it is converted into steel. Iron and steel scrap may be added to both the blast furnace and the basic iron furnace.
US Steel operates a number of integrated steel mills, including the Gary Works in Gary, Indiana. They also operate the Edgar Thomson Works, which is the iron- and steel-making unit of the Mon Valley Works, which includes three other related plants. The company operates the Great Lakes Works,[5] and Granite City Works.[6]
Cleveland-Cliffs operates every integrated steel mill: in East Chicago, Indiana, Burns Harbor, Indiana, and Cleveland, Ohio.[7]
In 2020, Cleveland Cliffs acquired AK Steel Corporation along with its three integrated steel mills, one in Middletown, Ohio, Dearborn, Michigan and the other in Ashland, Kentucky. The Ashland Works is no longer active and has been demolished.
Current integrated steel mills in the US
| Name | Location | Owner | Status and Date |
|---|---|---|---|
| Gary Works | Gary, Indiana | US Steel | Operating, February 2015[8] |
| Mon Valley Works - Irvin Plant, Edgar Thomson Steel Works | North Braddock, Pennsylvania | US Steel | |
| Indiana Harbor Works | East Chicago, Indiana | Cleveland-Cliffs | |
| Burns Harbor Works | Burns Harbor, Indiana | Cleveland-Cliffs | |
| Middletown Works | Middletown, Ohio | Cleveland-Cliffs | |
| Cleveland Works | Cleveland, Ohio | Cleveland-Cliffs | |
| Dearborn Works | Dearborn, Michigan | Cleveland-Cliffs | One operating blast furnace ("A")
Formerly Severstal Dearborn (2004–2014) Previously Rouge Steel (1989–2004) Previously Ford Rouge Plant (1910–1989) |
| Great Lakes Works | River Rouge and Ecorse, Michigan | US Steel | idled 2019 December[5] |
| Granite City Works | Granite City, Illinois | US Steel | Resumed operation 2018 [9]
Idled in 2023.[10] |
| Fairfield Works | Fairfield, Alabama | US Steel | closed permanently 2015 August [11] |
Specialty steel mills / minimills
[edit]There were about 112 minimills or specialty mills in the US, which in 2013 produced 59% of US total steel production. The specialty mills use iron and steel scrap, rather than iron ore, as feedstock, and melt the scrap in electric furnaces.
Notable Specialty and Mini-Mills in the US
| Name | Location | Owner | Status and Date |
|---|---|---|---|
| Brackenridge Works | Brackenridge, Pennsylvania | Allegheny Technologies | |
| former Colorado Fuel and Iron plant | Pueblo, Colorado | Oregon Steel Mills | Former integrated mill |
| Evraz Claymont Steel | Claymont, Delaware | Evraz Group | Closed |
| Mississippi Steel | Flowood, Mississippi | Nucor | |
| Butler Works | Butler, Pennsylvania | Cleveland-Cliffs, Inc. | Grain Oriented Electrical Steel |
Raw materials
[edit]The two main inputs into iron- and steel-making are a source of iron and a source of energy. Additional requirements are a fluxing material to remove the impurities, and alloy metals to give particular properties to the metal.
Raw materials used in US iron and steel production, 2012
| Input | metric tons | Purpose |
|---|---|---|
| Iron ore | 46,900,000 | Iron source |
| Iron and steel scrap | 104,100,000 | Iron source |
| Coke | 9,490,000 | Reducing agent |
| Lime | 5,730,000 | Flux |
| Fluorspar | 47,800 | Flux |
| Manganese | 382,000 | Alloy |
| Chromium | 251,000 | Alloy |
| Nickel | 194,000 | Alloy |
| Molybdenum | 11,800 | Alloy |
| Vanadium | 2,500 | Alloy |
| Tungsten | 123 | Alloy |
| Source: US Geological Survey, Minerals Yearbooks, 2012 and 2013.[12] | ||
Iron ore
[edit]Iron and steel scrap
[edit]Two-thirds of the iron and steel produced in the US is made from recycled scrap, rather than from iron ore. In 2014, 81 million mt of iron and steel were produced from scrap.[13] Most steel from scrap is produced using electric arc furnaces.
Coke
[edit]Coke, derived from coking coal, reduces iron ore (iron oxides) to metallic iron.
Flux
[edit]Flux materials, like lime, are added to the furnace to lower the melting point and remove impurities as slag. Other common fluxes include dolomite, soda ash, and fluorspar.
Alloy metals
[edit]Other metals are commonly added to steel to produce alloy steels of various types. Common alloy metals are manganese, nickel, molybdenum, chromium, and vanadium. Stainless steel commonly contains a minimum of 10.5% chromium, and may also contain significant amounts of nickel or molybdenum.
Slag
[edit]Slag, a byproduct of iron and steel-making composed primarily of highly impure glass, would normally be a waste product. However, it is in demand as an aggregate in concrete, asphalt paving, and construction fill. In 2014, the industry produced and marketed about 16.0 million mt of slag, worth an estimated $270 million.[14]
International trade
[edit]Since the 1960s, the U.S. has been a major importer of steel. In 2014, it exported 11 million tons but imported 39 million tons, with net imports making up 17% of consumption.[15]
| No. | Country | Volume (metric tons) |
Percent | Value (k$) |
Percent |
|---|---|---|---|---|---|
| 1 |  Canada |
5,675,816 | 16% | 5,119,944 | 18% |
| 2 |  Brazil |
4,665,428 | 14% | 2,442,468 | 8% |
| 3 |  South Korea |
3,401,405 | 10% | 2,785,764 | 10% |
| 4 |  Mexico |
3,155,117 | 9% | 2,501,226 | 9% |
| 5 |  Russia |
2,866,695 | 8% | 1,431,273 | 5% |
| 6 |  Turkey |
1,977,866 | 6% | 1,182,998 | 4% |
| 7 |  Japan |
1,727,844 | 5% | 1,657,908 | 6% |
| 8 |  Germany |
1,380,434 | 4% | 1,833,793 | 6% |
| 9 |  Taiwan |
1,128,356 | 3% | 1,261,033 | 4% |
| 10 |  India |
743,021 | 2% | 732,425 | 3% |
| Others | 7,750,525 | 22% | 8,189,503 | 28% | |
| Total | 34,472,507 | 100% | 29,138,335 | 100% | |
Following the 2024 U.S. presidential election, the U.S. steel industry actively advocated for stronger trade protections, including reimposing tariffs on steel imports from the United Kingdom, European Union, and Japan to address trade-distorting practices. The industry argued that steel tariffs imposed in 2018 boosted steel prices, profits, and employment. They have also publicly called for stricter enforcement of trade laws and increased tariffs on steel-intensive products from China and Southeast Asia.[19]
History of US iron- and steel-making
[edit]
The US iron and steel industry has paralleled the industry in other countries in technological developments. In the 1800s, the US switched from charcoal to coke in ore smelting, adopted the Bessemer process, and saw the rise of very large integrated steel mills. In the 20th century, the US industry successively adopted the open hearth process, then the basic oxygen furnace. Since the American industry peaked in the 1940s and 1950s, the US industry has shifted to small mini-mills and specialty mills, using iron and steel scrap as feedstock, rather than iron ore.
See also
[edit]References
[edit]- ^ "Industry Data". American Iron and Steel Institute. Archived from the original on 2024-11-07. Retrieved 2024-11-07.
- ^ Iron and Steel, Mineral Commodities Summaries.
- ^ Rickard, Stephanie J. (2020). "Economic Geography, Politics, and Policy" (PDF). Annual Review of Political Science. 23: 187–202. doi:10.1146/annurev-polisci-050718-033649.
- ^ US Department of Commerce, [ Steel industry executive summary], June 2015.
- ^ a b Deaux, Joe (2019-12-20). "U.S. Steel to cut 1,545 Michigan jobs as weakness overwhelms Trump's protection". Los Angeles Times. Retrieved 2019-12-21.
- ^ US Steel Corp., Facilities Archived 2016-02-16 at the Wayback Machine, accessed 1 August 2015.
- ^ 2014 ArelorMittal USA Factbook Archived 2015-09-15 at the Wayback Machine.
- ^ "US Steel closes Gary Works coke plant," Chicago Tribune, 26 Feb. 2015.
- ^ "USW Welcomes News of Restart at U.S. Steel Granite City Works".
- ^ "U.S. Steel idles steelmaking at Granite City Works indefinitely". fox2news. 2023-11-28. Retrieved 2024-02-01.
- ^ "U.S. Steel to End Operations at Alabama's Fairfield Works Mill". NPR.org.
- ^ US Geological Survey, Minerals Yearbook, 2012 and 2013.
- ^ Michael D. Fenton, Iron and steel scrap, US Geological Survey, Mineral Commodity Summary 2015, Jan. 2015.
- ^ Hendrik G. van Oss, Iron and Steel Slag, US Geological Survey, Mineral Commodity Summaries, Jan. 2015.
- ^ US Geological Survey, [1], 2015.
- ^ "Steel Imports Report: United States" (PDF). International Trade Administration. December 2017.
- ^ "Imports of Steel Products". United States Census Bureau.
- ^ "Exhibit 4. U.S. Imports For Consumption of Steel Products From Selected Countries and Areas" (PDF). United States Census Bureau.
- ^ Tita, Bob (2024-12-02). "Why This U.S. Industry Is Pushing Trump for Even More Tariffs". The Wall Street Journal. Retrieved 2024-12-02.
External links
[edit]- American Iron and Steel Institute
- U.S. Steel Executive Summary (via International Trade Administration)
| Iron production (Ironworks) |
|  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Steelmaking (Steel mill) |
| ||||||||
| Heat treatment methods |
| ||||||||
| Production by country | |||||||||
