Rodríguez Ballón International Airport

Rodríguez Ballón International Airport Aeropuerto Internacional Rodríguez Ballón
IATA: AQP ICAO: SPQU
Summary
Airport type	Public
Owner	CORPAC
Operator	Aeropuertos Andinos del Perú
Serves	Arequipa
Opened	15 August 1979 (1979-08-15)
Hub for	JetSmart Perú
Focus city for	LATAM Perú
Elevation AMSL	8,400 ft / 2,560 m
Coordinates	16°20′25″S 71°34′00″W
Map
AQP Location of the airport in Peru
Runways
Direction Length Surface m ft 09/27 2,980 9,777 Asphalt
Statistics (2023)
Passengers 1,980,498
Source: Corporación Peruana de Aeropuertos y Aviación Comercial

Rodríguez Ballón International Airport (Spanish: Aeropuerto Internacional Rodríguez Ballón, IATA: AQP, ICAO: SPQU) is an airport serving Arequipa, the capital of Arequipa Region and Peru's second largest city. This airport and Cusco's Alejandro Velasco Astete International Airport are the main air hubs in southern Peru. It is named for early Peruvian aviator Alfredo Rodríguez Ballón. It is the third most busiest airport in Peru.

It is the main air gateway for tourists visiting the city of Arequipa, nearby ruins, and the Colca Canyon, the world's second deepest canyon (only behind Cotahuasi Canyon, also in Arequipa). The airport's passenger traffic has grown very rapidly since the airport was granted in concession as part of 6 airports in the southern part of Peru to Aeropuertos Andinos del Perú. As of the end of 2017 passenger traffic was 1,689,921 as reported by CORPAC, Peru's national airport corporation. The current terminal has already excedeed its planned capacity (around 1.5 million passengers) and it is expected that the airport will reach 2 million passengers on or before the year 2020 and is to be expanded.

The runway is paved its entire length, which includes a 440 metres (1,440 ft) displaced threshold on Runway 28. The airport is currently operated by the consortium "Aeropuertos Andinos", who reshuffled and modernized the existing facilities. The installation of two boarding jetbridges and the expansion of the main hall, are among the work carried out by the consortium. The hall and the first jetbridge entered in operation on 20 September 2013. The airport currently handles domestic flights from Cusco, and Lima along with Guayaquil and Cartagena via Lima. It's a secondary base for airline JetSmart Perú.

History

LATAM Perú Airbus A320 in its former livery at the airport near Misti volcano

Rodríguez Ballón International Airport was opened in August 1979 and named after Peruvian aviator, Alfredo Rodríguez Ballón, who is famous in Arequipa for crossing the Andes Mountains from Mendoza, Argentina to Santiago in Chile in 1932. He would later be killed in a plane crash during the Colombia–Peru War. The airport quickly became one of the largest and busiest airports in Peru, even surpassing Cusco's Alejandro Velasco Astete International Airport for a few years. It was built with a maximum capacity for 500,000 passengers. It is owned by CORPAC S.A (Corporación Peruana de Aeropuertos y Aviación Comercial S.A.), the Peruvian Corporation of Comercial Airports and Aviation, the largest airport corporation in Peru.

Large airlines such as former flag carrier Aeroperú, Faucett Perú and Nuevo Continente dominated the airport, having international destinations to Bolivia and Chile along with many other airports in Peru but were all declared bankrupt in the 1990s and 2000s, with foreign owned airlines such as LATAM Airlines Perú taking control of the market. In March 1983, a Douglas C-47 of the Peruvian Air Force arrived at the airport damaged after an accident. In 1996, Faucett Perú Flight 251 was approaching Arequipa from Lima on its way to Coronel FAP Carlos Ciriani Santa Rosa International Airport in Tacna. Unable to see the runway midst a thunderstorm. The aircraft crashed when it attempted to land, killing all 123 people onboard. It is considered the deadliest Peruvian aviation accident in history.

The airport was given in concession to Aeropuertos Andinos del Perú (AAP) for 25 years in 2011, even at that time the main terminal was operating at more than twice its planned capacity, the infrastructure was obsolete and neglected, part of the concession agreement required the airport operator to upgrade and expand the facilities. Over one million passengers flew through the airport which prompted the airport to be expanded and remodeled. In 2013, construction of two jet bridge's, expansion of the terminal and a new modern exterior work began and was completed that same year. By then, passenger traffic at the airport was growing by 11% and the airport was in need of another expansion.

In 2023, Aeropuertos Andinos del Perú (AAP) announced another expansion and modernization of the airport with a planned investment of $26 million. The new expanded terminal is set to have a capacity of 2 million passengers every year. The airports expansion plan was accepted in 2024 and construction is planned to begin that same year. The new terminal is set to be completed in January 2026 and allow access to other countries such as Argentina, Bolivia and Chile.

Airlines and destinations

Airlines	Destinations
JetSmart Perú	Cusco, Lima
LATAM Perú	Cusco, Lima
Sky Airline Peru	Cusco (begins 10 March 2025), Lima

Passenger traffic information

Year	2019	2018	2017	2016	2015	2014	2013	2012	2011	2010
Passenger Traffic	1'990,820	1'921,316	1'689,921	1'634,090	1'492,423	1'351,182	1'282,504	1'148,438	1'025,476	939,397
YoY% Growth	3.62%	13.75%	3.42%	9.5%	10.45%	5.35%	11.67%	11.99%	9.16%	N/A

Airport expansion

Phase 1 upgrade and expansion

By 2011 the original airport terminal area was around 4,000 sq meters (42,000 sq ft) and the airport had already exceeded over one million passengers per year (twice its planned capacity), the airport's infrastructure looked old and was inadequate for the needs of the city. During 2013 the airport was expanded and remodeled in order to accommodate increased passenger traffic and to provide better services to passengers. The main goals for this expansion consisted in building a perimeter wall to improve security, the construction of 2 departure gates and installation of 2 jetbridges in the second floor of the airport, some aesthetic improvements (new facade), handicap access, and other minor improvements. In order to alleviate passenger congestion as well as to provide a more modern and secure infrastructure, the airport terminal area was very rapidly increased by more than 50% the original design (6,500 sq mt/70,000 sq ft) at an estimated cost of US$10 Million. Passenger airport capacity was tripled very rapidly in 2013 to around 1.5 million passengers/year which was expected to be reached by the end 2018. In the meanwhile a long term master plan for the airport has been developed that would further expand and remodel the airport.

Phase 2 expansion

Due to increased tourism and overall improvement of the economy by 2015 (only 2 years after the first phase expansion) the airport had once again reached the planned capacity for the Phase 1 expansion, 3

years ahead of schedule, causing passenger congestion, airplane delays and reducing overall operational efficiency, as a result some airlines decided to stop or reduce service to the city, even with the improvements made on Phase 1, the airport today still lacks many services that a more modern airport provides such as shopping areas, food court, business area, VIP Salon, hotels etc.

A second expansion and remodeling is needed, and as per the master plan, the second phase of the airport expansion will include:

1. Removing the main runway's displaced threshold by correcting the runway's slope, thus allowing larger aircraft to land in the airport and use the whole length of the main runway (3,000 meters), the removal of the displaced threshold will make Arequipa's airport a true International airport as it will allow for the landing of longer haul aircraft. Runway and installations currently only allows for landing of airplanes as large as Boeing 737-200/Airbus 320, today in case of an extreme emergency the airport would only be able handle a plane as large 747 type aircraft using the whole length of the runway.
2. Improvement and extension of existing taxiways, construction of a waiting area for departing airplanes.
3. Construction of at least 2 additional departure gates (3,000 sq meters or 33,000 sq ft),
4. Addition of 2 or more jetbridges,
5. Increasing the area of existing terminal by 20,000 sq mt or 240,000 sq ft
6. Increasing and improving the existing airplane platform, counter, bag reception and parking areas.

This second airport expansion will increase the total airport terminal area to around 27,000 sq mt (almost 7 times the original terminal area and more than 4.5 times the current terminal area), it will double the

A possible front view design for a new terminal

amount of counter and ticketing space, thus allowing more airline companies in the airport, it will add more organized and diverse airport services, it will increase airplane departing and parking areas, and it will also add additional automobile parking spaces. This second phase expansion will translate into a maximum airport capacity of around 4.0 million passengers per year. Once construction is completed Arequipa's Airport will be the second largest airport in Peru in terms of terminal area and passenger capacity (at least temporarily until Cuzco's airport is moved to its new location in the Chincheros district).

Construction and remodeling was expected to start in 2019 and conclude sometime in 2020, (plans for the expansion of the existing terminal apparently have been put

Possible boarding area for a new terminal

on hold as the possibility of a new terminal is analyzed). The total cost of the second phase expansion is expected to be between US$40-$60 million, depending on the final goals and requirements of the project.

Phase 3 expansion

Phase 3 expansion is expected to start once airport capacity exceeds 4 million passengers at that time the airport terminal area will be once again doubled to 60,000 sq mt and the main runway will be extended in order to accommodate even larger planes, permitting direct flights to/from North America, Asia and Europe, as a result and once construction is completed, it is expected that the maximum airport passenger capacity will be around 8 million passengers per year, this maximum capacity is expected to be reached on in the future.

Accidents and incidents

• On 18 March 1983, Douglas C-47E FAP-356 of the Fuerza Aérea del Perú was damaged beyond repair in an accident at Arequipa Airport.
• On 29 February 1996, Faucett Perú Flight 251 was flying a stopover in Arequipa to Tacna and crashed while approaching the airport. All 123 passengers and crew died. It is the deadliest Peruvian aviation accident.

See also

• Transport in Peru
• List of airports in Peru

External links

• Aeropuertos Andinos del Perú
• Rodríguez Ballón International Airport at OurAirports
• Aeronautical chart and airport information for Aeropuerto Internacional Rodríguez Ballón at SkyVector
• Accident history for Rodríguez Ballón Airport at Aviation Safety Network