PNA Thompson (GC-26)

History
(Prefectura Naval Argentina)Argentina
Name	Thompson
Namesake	Martín Jacobo Thompson
Builder	Empresa Nacional Bazán, El Ferrol, Spain
Laid down	1981
Launched	1981
Completed	1983
Commissioned	1983
Homeport	Buenos Aires
Identification	MMSI number: 701537000 Callsign: L2AC
Status	In service as of 2016
General characteristics
Class and type	Mantilla-class patrol boat
Type	Offshore Patrol Boat
Displacement	900 tons
Length	65 m (213.3 ft)
Beam	10.5 m (34.4 ft)
Draft	3.2 m (10 ft)
Installed power	5,000 ihp (3,700 kW)
Propulsion	2-shaft, 2 × Bazán-MTU 16V-956 marine diesel engines
Speed	max 21.5 knots (24.7 mph; 39.8 km/h)
Range	5,000 nautical miles
Complement	38
Armament	1 × 40 mm (1.6 in) L/70 Bofors AA gun
Notes	Career and characteristics data from “Histarmar” website.

PNA Thompson (GC-26) is a Mantilla-class patrol boat of the Argentine Naval Prefecture, built at the Empresa Nacional Bazán shipyards and commissioned in 1983. The vessel is named after Martín Jacobo Thompson, an Argentine naval officer during the Independence War, and first Harbourmaster of Buenos Aires; she is the first PNA ship with this name.

Design

Thompson is one of five Mantilla-class patrol boats ordered by the Argentine Naval Prefecture (PNA) in 1981, corresponding to the coast guard cutter “Halcon II” type, designed and build by the Spanish Empresa Nacional Bazán shipyard. The design is optimised for long range open seas patrols, for prolonged periods of time away from port.

Thompson has a steel hull and superstructure, with a single mast atop, behind the bridge. She is powered by two Bazán-MTU 16V-956-TB91 marine diesel engines of 2500 kW each (maximum intermittent power 3000 kW) totalling to 7,500 horsepower, driving two Variable-pitch propellers; with a maximum speed of 21.5kn. The design has a maximum range of 5,000 nautical miles at a cruise speed of 16kn.

She has three electrical generators of 185Kva each, powering a varied array of systems: controls and communications system that integrates with other PNA air and surface assets; navigation radar; echosound; direction finder; and helicopter navigation control. Thompson is equipped with two water cannons for firefighting, anti-contamination gear, active stabilizers and a retractable hangar and landing pad with support facilities for an Alouette-sized helicopter. She is armed with a single 40mm L/70 Bofors dual-purpose autocannon in a position at the front of the bridge.

History

Thompson was ordered by the Argentine Naval Prefecture (PNA) in 1980 as part of the five-ship Mantilla-class, designed to fill Argentina's need for a deep water coast guard. composed by the patrol boats GC-24 to GC-28. She was built in 1981-83 by the Spanish Empresa Nacional Bazán shipyard. She was launched in December 1981, completed in June 1983, and left El Ferrol, Spain, on 18 August 1983, arriving in Buenos Aires later that month. She was commissioned on 26 August 1983 and assigned to the Coast Guard Service ((in Spanish) Servicio de Buques Guardacostas}).

In 1986 she was assigned to the “Prefectura de Mar del Plata” based in Mar del Plata.

Service

On 14 June 2002, the patrol ship Thompson shot three times without warning at a Russian fishing vessel Odoevsk. Argentines claimed that Russians were fishing squid in the economic zone of this country.

See also

• Z-28 class patrol boat

References

Other sources

• "Guardacostas Marítimo Clase Halcón II "THOMPSON" GC-26". Histarmar - Historia y Arqueología Marítima (in Spanish). Argentina: Fundación Histarmar. Retrieved 2016-11-26.

Further reading

• Faulkner, K. (1999). Jane's Warship Recognition Guide (2nd ed.). London, UK: Harper Collins Publishers.
• Wertheim, E. (2007). Naval Institute Guide to Combat Fleets of the World: Their Ships, Aircraft, and Systems (15th ed.). Annapolis, MD: Naval Institute Press.

External links

• (in Spanish) - Servicio de Buques Guardacostas – Prefectura Naval Argentina, oficial website (accessed 2016-11-26)