Jump to content

Odor: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Reverted 2 edits by Drobbere; Rv link promotion. (TW)
Drobbere (talk | contribs)
promotional material removed
Line 192: Line 192:


Currently there is no regulation of the use of scent in product design. The FDA has no say as to what items are used to create a scent. If ingredients are listed on a product, the term fragrance can be used in a general sense. The National Academy of Sciences (NAS) reports that “95 percent of the ingredients used to create fragrances today are synthetic compounds derived from petroleum, including benzene derivatives, aldehydes, and many other known toxins and sensitizers. Many of these substances have been linked to cancer, birth defects, central nervous system disorders, and allergic reactions.” <ref>Sverdlove, Jill. “ Stop Making Scents The hidden hazards of synthetic fragrances.” Natural Solutions. http://www.naturalsolutionsmag.com/article-display/13404/subTopicID/150/Stop-Making-Scents Web. April 1, 2007</ref>
Currently there is no regulation of the use of scent in product design. The FDA has no say as to what items are used to create a scent. If ingredients are listed on a product, the term fragrance can be used in a general sense. The National Academy of Sciences (NAS) reports that “95 percent of the ingredients used to create fragrances today are synthetic compounds derived from petroleum, including benzene derivatives, aldehydes, and many other known toxins and sensitizers. Many of these substances have been linked to cancer, birth defects, central nervous system disorders, and allergic reactions.” <ref>Sverdlove, Jill. “ Stop Making Scents The hidden hazards of synthetic fragrances.” Natural Solutions. http://www.naturalsolutionsmag.com/article-display/13404/subTopicID/150/Stop-Making-Scents Web. April 1, 2007</ref>

==Odor and Gastronomy==
Odor is one of the most important [[sense|organoleptic properties]] of [[food]]. It is the main part of the [[flavor]] of a [[food]] product. In a food context, one usually speaks about [[aroma]], which is the same as odor. [[Chefs]], [[food engineers]] and scientists are conducting a never ending quest to improve [[flavor]] and to find new and innovative food combinations.

This quest has lead to the creation of the [[foodpairing]] theory. With this theory, one is able to identify which food products combine well with one another. [[Foodpairing]] provides potential [[food]] and [[beverage]] combinations, based on their [[flavor]] profile and common flavours. The [[foodpairing]] method is designed to inspire [[chefs]], [[mixologists]], [[foodies]], home cooks and [[food engineers]], it aids [[recipe]] design and provides new possible [[food]] combinations.


==See also==
==See also==

Revision as of 15:47, 18 August 2010

Odor receptors on the antennae of a Luna moth

An odor or odour is caused by one or more volatilized chemical compounds, generally at a very low concentration, that humans or other animals perceive by the sense of olfaction. Odors are also called scents, which can refer to both pleasant and unpleasant odors. The terms fragrance, scent, and aroma are used primarily by the food and cosmetic industry to describe a pleasant odor, and are sometimes used to refer to perfumes. In contrast, malodor, stench, reek, and stink are used specifically to describe unpleasant odors.

Terminology

In the United Kingdom, "odour" refers to scents in general. In the US, "odor" has a more negative connotation, such as "stench" or "stink"; "scent" or "aroma" are used for pleasant smells.

Basics

The widest range of odors consists of organic compounds, although some inorganic substances, such as hydrogen sulfide and ammonia, are also odorants. The perception of an odor effect is a two-step process. First, there is the physiological part; the detection of stimuli by receptors in the nose. The stimuli are processed by the region of the human brain which is responsible for olfaction. Because of this, an objective and analytical measure of odor is impossible. While odor feelings are very personal perceptions, individual reactions are related to gender, age, state of health, and private affectations. Common odors that people are used to, such as their own body odor, are less noticeable to individuals than external or uncommon odors.

For most people, the process of smelling gives little information concerning the ingredients of a substance. It only offers information related to the emotional impact. Experienced people, however, such as flavorists and perfumers, can pick out individual chemicals in complex mixes through smell alone.

Odor analysis

In Germany, the concentrations of odorants have since the 1870s been defined by the “Olfaktometrie”, which helps to analyze the human sense of smell using the following parameters: odor substance concentration, intensity of odor, and hedonic assessment.

To establish the odor concentration, an olfactometer is used which employs a panel of human noses as sensors. In the olfactometry testing procedure, a diluted odorous mixture and an odor-free gas (as a reference) are presented separately from sniffing ports to a group of panelists, which are housed in an odor neutral room. They are asked to compare the gases emitted from each sniffing port, after which the panelists are asked to report the presence of odor together with a confidence level such as guessing, inkling, or certainty of their assessment. The gas-diluting ratio is then decreased by a factor of two (i.e. chemical concentration is increased by a factor of two). The panelists are asked to repeat their judgment. This continues for a number of dilution levels. The responses of the panelists over a range of dilution settings are used to calculate the concentration of the odor in terms of European Odor Units (ouE/m³). The main panel calibration gas used is Butan-1-ol., which at a certain diluting gives 1 ouE/m³.

General survey

The analytic methods could be subdivided into the physical, the gas chromatographical, and the chemosensory method.

When measuring odor, there is a difference between emission and immission measurements. Emission measurement can be conducted by olfactometry using an olfactometer to dilute the odor sample. On the contrary, olfactometry is rarely used for immission measurement because of the low odor concentrations. The same measuring principals are used, but the judgment of the air assay happens without diluting the samples.

Measurement

Different aspects of odor can be measured through a number of quantitative methods, such as assessing concentration or apparent intensity.

Measuring Odor concentration

The measurement of odor concentration is the most widespread method to quantify odors. It is standardized in CEN EN 13725:2003[1]. The method is based on dilution of an odor sample to the odor threshold (the point at which the odor is only just detectable to 50 % of the test panel). The numerical value of the odor concentration is equal to the dilution factor that is necessary to reach the odor threshold. Its unit is the European Odor Unit, OUE. Therefore, the odor concentration at the odor threshold is 1 OUE by definition.

To establish the odor concentration, an olfactometer is used which employs a group of panelists. A diluted odorous mixture and an odor-free gas (as a reference) are presented from sniffing ports to a group of panelists. In comparing the odor emitted from each port, the panelists are asked to report if they can detect a difference between the ports. The gas-diluting ratio is then decreased by a factor of 1.4 or two (i.e. the concentration is increased accordingly). The panelists are asked to repeat their judgment. This continues until the panelists respond certain and correct twice in a row. These responses used to calculate the concentration of the odor in terms of European Odor Units (OUE/m3).

The test persons must fulfill certain requirements, for example regarding their sensitivity of odor perception. The main panel calibration gas to verify this requirement used is n-Butanol (as 1 OUE/m3≡40 ppb/v n-butanol)[2].

To collect an odor sample, the samples must be collected using specialized sample bags, which are made from an odor free material e.g. Teflon. The most accepted technique for collecting odor samples is the lung technique, where the sample bag is placed in a sealed drum, and a vacuum is placed on the drum, which fills the sample bag as the bag expands, and draws the sample from the source into the bag. Critically, all components which touch the odor sample, must be odor free, which includes sample lines and fittings.

There are a number of issues which have to be overcome with sampling, these include: - If the source is under vacuum - if the source is at a high temperature - If the source has high humidity

Issues such as temperature and humidity are best overcome using either pre-dilution or dynamic dilution techniques.

Odor intensity

Odor intensity can be divided into the following categories according to intensity:

0 - no odor
1 - very weak (odor threshold)
2 - weak
3 - distinct
4 - strong
5 - very strong
6 - intolerable

This method is applied by in the laboratory and is done so by a series of suitably trained panelists/observers who have been trained to appropriately define intensity.

Hedonic Tone Assessment

Hedonic assessment is the process of scaling odors on a scale ranging from extremely unpleasant via neutral up to extremely pleasant. It is important to note that intensity and hedonic tone, whilst similar, refer to different things. That is, the strength of the odor (intensity) and the pleasantness of an odor (hedonic tone). Moreover, it is important to note that perception of an odor may change from pleasant to unpleasant with increasing concentration and intensity.

Odor Character

The character of an odor is a critical element is assessing an odor. Most commonly, a set of standard descriptors is used, which may range from fragrant to sewer odor[3]. Although the methods is fairly simplistic, it is important for the FIDOL factors to be understood by the person recording the character. This method is most commonly used to define the character of an odor which can then be compared to other odors. It is common for olfactometry laboratories to report character as an addition factor post sample analysis.

Interpreting Dispersion Modelling

In many countries odor modeling is used to determine the extent of an impact from an odor source.

These are a function of modeled concentration, averaging time (over what time period the model steps are run over (typically hourly)) and a percentile. Percentiles refer to a statistical representation of how many hours per year, the concentration C may be exceeded based on the averaging period.

Sampling From area sources

There are two main odor sampling techniques, the direct odor sampling and the indirect odor sampling technique.

Indirect refers to collecting samples from the air stream which has already passed over the emitting surface.

Direct Sampling

Direct refers to the placement of a enclosure on an emitting surface from which samples are collected, and an odor emission rate is determined.

The most commonly used direct methods include the Flux Chamber and wind tunnels which include the UNSW Wind tunnel. There are many other available techniques, and consideration should be given to a number of factors before selecting a suitable method.

A source which has implications for this method are sources such as bark bed biofilters, which have a vertical velocity component. For such sources, consideration needs to be given as to the most appropriate method. A commonly used technique is to measure the odor concentration at the emitting surface, and combine this with the volumetric flow rate of air entering the biofilter to produce an emission rate.

Indirect odor sampling

Indirect sampling is often referred to as back calculation. It involves the use of a mathematical formula to predict an emission rate.

Many methods are used, but all make use of the same inputs which include - Surface roughness - Upwind and down wind concentrations - Stability class (or other similar factor) - Wind speed and direction

Legislative provisions associated with odors

While developing environmental legislation in Germany, it was noted that there was a need for a method with which to accurately measure odor. Since that time, the following laws have been made:

  1. “refinery guideline” (early 1970s)
  2. federal emission protection law (1974)
  3. technical guideline to keep the air fresh
  4. olfactory emission guideline (early 1980s until 1998)

Controls at the point of the emission, like plural vitrification against aircraft noise, drop out. Terms of transmission could be marginally changed by establishing ramparts, plantings and so on, but the objective efficiency of those controls is likely minimal. But the subjective efficiency of a plantings is remarkable.

The choice of the location is the most important control. This involves keeping an adequate distance from the nearest receptor and paying attention to the meteorological conditions; e.g., prevailing wind direction. Reducing the concentraion of an odor (emission), by diluting a small emission with a large air flow, could be an effective and economic alternative to reducing the emission with different controls. Encapsulating of olfactory relevant asset areas is the best known method to reduce the emission, but it is not the most suitable one. Different matters need to be considered by encapsulation. Within an enclosure a damp and oppressive atmosphere can arise, so that the inner materials of the capsule produce a high degree of mechanical stress. Not to let the explosion hazard slide.

For encapsulation to be viable, there must be some way to exhaust the spent air. When emission is avoided through capsuling, odorants remain inside the medium and tend to leak at the next suitable spot. In any case, capsuling is never really gas-proof, and at some spots substances may leak out at considerably higher concentrations.

There are three different ways exhausted air may be treated:

  • chemical treatment
  • physical treatment
  • biological treatment

Adsorption as separating process

Adsorption is a thermo separation process, which is characterized by the removal of molecules out of a fluid phase at a solid surface. Molecules of a gas- or fluid mixture are taken up by a solid with a porous interface surface. The solid matter is called the adsorbant, the adsorbed fluid is called the adsorbate. There are two types of adsorption, physisorption and chemisorption. The type of force driving the adsorption process is different between the two.

Physisorption

A special type of adsorption is physisorption. The difference between physisorption and chemisorption is that the adsorbed molecule is tied up with the substrate by physical forces, defined here as forces which do not cause chemical bonds. Such interactions are mostly unfocused in contrast to chemical bonds. “Van-Der-Waals” – forces are a special type of such physical forces. These forces are characterized by electrostatic interactions between induced, fluctuating dipoles. To be more specific you have to call those forces “London's Dispersal forces.” A so called dipole moment occurs because of fluctuations in the distribution of electrons around individual atoms. The temporary mean value of this force is however zero. Even though it’s only a mere transient dipole moment, this moment can cause a nonparallel dipole moment in an adjacent molecule. Operating forces of this nature are in inverse proportion to the sixth power of the distance between those molecules. These forces occur in almost every chemical system, but are relatively weak.

Physisorption is an exothermic and reversible reaction. Obviously stronger strengths accrue through the interaction between solid dipoles at polar surfaces or reflexive loadings, appearing in electric conductive surfaces. Such interactions could be defined as a chemisorption because of their strength.

Chemisorption

In many reactions, physisorption is a pre-cursor to chemisorption. Compared to physisorption, chemisorption is not reversible and requires a larger activation energy. Usually the bond energy is about 800 kJ/mol. For physisorption the bond energy is only about 80 kJ/mol. A monomolecular layer could be maximally adsorbed. Strong bonds between the adsorbative molecules and the substrate could lead to the point that their intermolecular bonds partly or completely detach. In such a case you have to call this a dissociation. Those molecules are in a highly reactive state. This is the basis of heterogeneous catalysis. The substrate is then called catalytic converter. The differences between Chemisorption and Physisorption extends beyond an increased activation energy. An important criteria for chemisorption is the chemical mutation of the absorbent. Thereby it is possible that you have to deal with a chemisorption in a few combinations with a relatively low bond energy, for example 80 kJ/mol, as a physisorption could be another combination with a bond energy even by 100 kJ/mol. The interaction with different adsorbative molecules is very different. The surface could be taken by substances, which point out a very high bond energy with the substrate, and as a consequence of this the wanted reaction is impossible. Because of that feature those substances are called catalytic converter venom. Heat is released during that process too.

Loading of the adsorben

During the adsorption of a molecule, energy - the heat of adsorption – is released. This energy is the difference of the enthalpy of the adsorben in the fluid or gaseous phase and the its corresponding enthalpy on the surface of the adsorbant. With an increase of the loading on the surface of the adsorbant the bond energy decreases in the area of the monomolecular covering. For higher loading this value approaches zero. This implies that there is a limit for the loading of an adsorbant. The procedure of turning back that process is called desorption. Adsorption as a separating process is a challenging process, in the case of finding the eligible adsorbents, which could link as multilateral as possible.

Types of odors

Some odors such as perfumes and flowers are sought after, elite varieties commanding high prices. Whole industries have developed products to remove unpleasant odors (see deodorant). The perception of odors is also very much dependent upon circumstance and culture. The odor of cooking processes may be pleasurable while cooking but not necessarily after the meal.

The odor molecules transmit messages to the limbic system, the area of the brain that governs emotional responses. Some believe that these messages have the power to alter moods, evoke distant memories, raise their spirits, and boost self-confidence. This belief has led to the concept of “aromatherapy” wherein fragrances are claimed to cure a wide range of psychological and physical problems. Aromatherapy claims fragrances can positively affect sleep, stress, alertness, social interaction, and general feelings of well-being. However, the evidence for the effectiveness of aromatherapy consists mostly of anecdotes and lacks controlled scientific studies to back up its claims.

With some fragrances, such as those found in perfume, scented shampoo, scented deodorant, or similar products, people can be allergic to the ingredients. The reaction, as with other chemical allergies, can be anywhere from a slight headache to anaphylactic shock, which can result in death. [citation needed]

Unpleasant odors can arise from specific industrial processes, adversely affecting workers and even residents downwind of the industry. The most common sources of industrial odor arise from sewage treatment plants, refineries, specific animal rendering plants and industries processing chemicals (such as sulfur) which have odorous characteristics. Sometimes industrial odor sources are the subject of community controversy and scientific analysis.

The study of odors

The study of odors is a growing field but is a complex and difficult one. The human olfactory system can detect many thousands of scents based on only very minute airborne concentrations of a chemical. The sense of smell of many animals is even better. Some fragrant flowers give off odor plumes that move downwind and are detectable by bees more than a kilometer away.

The study of odors can also get complicated because of the complex chemistry taking place at the moment of a smell sensation. For example iron metal objects are perceived to have an odor when touched although iron vapor pressure is negligible. According to a 2006 study[4] this smell is the result of aldehydes (for example nonanal) and ketones (example: 1-octen-3-one) released from the human skin on contact with ferrous ions that are formed in the sweat-mediated corrosion of iron. The same chemicals are also associated with the smell of blood as ferrous iron in blood on skin produces the same reaction.

Pheromones

Pheromones are odors that are used for communication. A female moth may release a pheromone that can entice a male moth that is several kilometers away. Honeybee queens constantly release pheromones that regulate the activity of the hive. Workers can release such smells to call other bees into an appropriate cavity when a swarm moves in or to "sound" an alarm when the hive is threatened.

Advanced technology

There are hopes that advanced technology could do everything from test perfumes to help detect cancer or explosives by detecting specific scents, but as of yet artificial noses are still problematic. The complex nature of the human nose, its ability to detect even the most subtle of scents, is at the present moment difficult to replicate.

Most artificial or electronic nose instruments work by combining output from an array of non-specific chemical sensors to produce a finger print of whatever volatile chemicals it is exposed to. Most electronic noses need to be "trained" to recognize whatever chemicals are of interest for the application in question before it can be used. The training involves exposure to chemicals with the response being recorded and statistically analyzed, often using multivariate analysis and neural network techniques, to "learn" the chemicals. Many current electronic nose instruments suffer from problems with reproducibility with varying ambient temperature and humidity.

The use of scent in design

The sense of smell is often overlooked as a way of marketing products. The controlled application of scent is used by designers, scientists, artists, perfumers, architects and chefs. Some applications of scents in environments are in casinos, hotels, private clubs and new automobiles. "Technicians at New York City’s Sloan-Kettering Cancer Center disperse vanilla-scented oil into the air to help patients cope with the claustrophobic effects of MRI testing. Scents are used at the Chicago Board of Trade to lower the decibel level on the trading floor." [5]

The new car smell is not intentional by the manufacturer but is the smell “of number of harmful chemicals, including antimony, bromine, chlorine, and lead. Repeated and concentrated exposure to any of these chemicals may contribute to a variety of acute and long-term health issues such as birth defects, impaired learning, liver toxicity, and cancer.” [6]

Currently there is no regulation of the use of scent in product design. The FDA has no say as to what items are used to create a scent. If ingredients are listed on a product, the term fragrance can be used in a general sense. The National Academy of Sciences (NAS) reports that “95 percent of the ingredients used to create fragrances today are synthetic compounds derived from petroleum, including benzene derivatives, aldehydes, and many other known toxins and sensitizers. Many of these substances have been linked to cancer, birth defects, central nervous system disorders, and allergic reactions.” [7]

Odor and Gastronomy

Odor is one of the most important organoleptic properties of food. It is the main part of the flavor of a food product. In a food context, one usually speaks about aroma, which is the same as odor. Chefs, food engineers and scientists are conducting a never ending quest to improve flavor and to find new and innovative food combinations.

This quest has lead to the creation of the foodpairing theory. With this theory, one is able to identify which food products combine well with one another. Foodpairing provides potential food and beverage combinations, based on their flavor profile and common flavours. The foodpairing method is designed to inspire chefs, mixologists, foodies, home cooks and food engineers, it aids recipe design and provides new possible food combinations.

See also

References

  1. ^ CEN EN 13725:2003, Air quality - Determination of odour concentration by dynamic olfactometry.
  2. ^ Van Harreveld, A. P. (1999). "A review of 20 years of standardization of odor concentration measurement by dynamic olfactometry in Europe". Journal of the Air & Waste Management Association. 49 (6): 705–715. {{cite journal}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
  3. ^ http://www.mfe.govt.nz/publications/air/odour-guidelines-jun03/html/page6.html
  4. ^ Communication The Two Odors of Iron when Touched or Pickled: (Skin) Carbonyl Compounds and Organophosphines Dietmar Glindemann, Andrea Dietrich, Hans-Joachim Staerk, Peter Kuschk Angewandte Chemie International Edition web release 2006 doi:10.1002/anie.200602100
  5. ^ Miller, Tabitha M.A. “Smell.” http://www.tabithamiller.com/learning/smell.htm Web.
  6. ^ Seaman, Kirk. “That New-Car Smell. Intoxicating…and Toxic?” http://autos.aol.com/article/toxic-car-interiors/ Web. Jan 24, 2010.
  7. ^ Sverdlove, Jill. “ Stop Making Scents The hidden hazards of synthetic fragrances.” Natural Solutions. http://www.naturalsolutionsmag.com/article-display/13404/subTopicID/150/Stop-Making-Scents Web. April 1, 2007