Nickel silicide
Identifiers | |
---|---|
3D model (JSmol)
|
|
ChemSpider | |
EC Number |
|
PubChem CID
|
|
| |
| |
Properties | |
Ni2Si | |
Molar mass | 145.473 g/mol[1] |
Density | 7.40 g/cm3[1] |
Melting point | 1,255 °C (2,291 °F; 1,528 K)[1] |
Structure[2] | |
Orthorhombic, oP12 | |
Pnma, No. 62 | |
a = 0.502 nm, b = 0.374 nm, c = 0.708 nm
| |
Formula units (Z)
|
4 |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Identifiers | |
---|---|
3D model (JSmol)
|
|
ChemSpider | |
PubChem CID
|
|
| |
| |
Properties | |
NiSi | |
Molar mass | 86.778 g/mol |
Structure[3] | |
Orthorphomic, oP8 | |
Pnma, No. 62 | |
a = 0.519 nm, b = 0.333 nm, c = 0.5628 nm
| |
Formula units (Z)
|
4 |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Identifiers | |
---|---|
3D model (JSmol)
|
|
PubChem CID
|
|
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
NiSi2 | |
Molar mass | 114.864 g/mol[1] |
Density | 7.83 g/cm3[1] |
Melting point | 993 °C (1,819 °F; 1,266 K)[1] |
Structure[4] | |
Cubic, cF12 | |
Fm3m, No. 225 | |
a = 0.5406 nm
| |
Formula units (Z)
|
4 |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Nickel silicides include several intermetallic compounds of nickel and silicon. Nickel silicides are important in microelectronics as they form at junctions of nickel and silicon. Additionally thin layers of nickel silicides may have application in imparting surface resistance to nickel alloys.
Compounds
[edit]Nickel silicides include Ni3Si, Ni31Si12, Ni2Si, Ni3Si2, NiSi and NiSi2.[5] Ni31Si12, Ni2Si, and NiSi have congruent melting points; the others form via a peritectic transformation.[citation needed] The silicides can be made via fusion or solid state reaction between the elements, diffusion at a junction of the two elements, and other methods including ion beam mixing.[citation needed]
Properties
[edit]Nickel silicides are generally chemically and thermally stable.[citation needed] They have low electrical resistivity; with NiSi 10.5–18 μΩ·cm, Ni2Si 24–30 μΩ·cm, NiSi2 34–50 μΩ·cm; nickel-rich silicides have higher resistivity rising to 90–150 μΩ·cm in Ni31Si12.[citation needed]
Uses
[edit]Microelectronics
[edit]Nickel silicides are important in microelectronic devices – specific silicides are good conductors, with NiSi having a conductivity approaching that of elemental nickel.[citation needed] With silicon carbide as the semiconductor nickel reacts at elevated temperatures to form nickel silicides and carbon.[citation needed]
Other
[edit]Nickel silicides have potential as coatings for nickel-based superalloys and stainless steel, due to their corrosion, oxidation, and wear resistance.[citation needed] NiSi has been investigated as a hydrogenation catalyst for unsaturated hydrocarbons.[6] Nickel silicide nanoparticles supported on silica support have been suggested as an alternative catalyst to widely used pyrophoric Raney nickel.[7]
See also
[edit]- J. Marvin Herndon, who promoted a theory that the Earth's core is nickel silicide
- Titanium disilicide, also used in microelectronics
- Salicide, self-aligned silicides
References
[edit]- ^ a b c d e f Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). CRC Press. p. 4.77. ISBN 978-1439855119.
- ^ El Boragy M., Rajasekharan T.P., Schubert K. (1982). Z. Metallkd., 73, 193–197
- ^ Wopersnow W., Schubert K. (1976) Z. Metallkd., 67, 807–810
- ^ Beck, U.; Neumann, H.-G.; Becherer, G. (1973). "Phasenbildung in Ni/Si-Schichten". Kristall und Technik. 8 (10): 1125–1129. doi:10.1002/crat.19730081005.
- ^ Dahal, Ashutosh; Gunasekera, Jagath; Harringer, Leland; Singh, Deepak K.; Singh, David J. (July 2016), "Metallic nickel silicides: Experiments and theory for NiSi and first principles calculations for other phases", Journal of Alloys and Compounds, 672: 110–116, arXiv:1602.05840, doi:10.1016/j.jallcom.2016.02.133, S2CID 55434466
- ^ Itahara, Hiroshi; Simanullang, Wiyanti F.; Takahashi, Naoko; Kosaka, Satoru; Furukawa, Shinya (2019), "Na-Melt Synthesis of Fine Ni3Si Powders as a Hydrogenation Catalyst", Inorganic Chemistry, 58 (9): 5406–5409, doi:10.1021/acs.inorgchem.9b00521, PMID 30983337, S2CID 115204460
- ^ P. Ryabchuk, G. Agostini, M.-M. Pohl, H. Lund, A. Agapova, H. Junge, K. Junge and M. Beller, Sci. Adv., 2018, 4, eaat0761 https://doi.org/10.1126/sciadv.aat0761
Further reading
[edit]- Lavoie, C.; d’Heurle, F.M.; Detavernier, C.; Cabral, C. (Nov 2003), "Towards implementation of a nickel silicide process for CMOS technologies", Microelectronic Engineering, 70 (2–4): 144–157, doi:10.1016/S0167-9317(03)00380-0