Module:Buffer/sandbox
![]() | This is the module sandbox page for Module:Buffer (diff). |
![]() | This module is rated as ready for general use. It has reached a mature form and is thought to be relatively bug-free and ready for use wherever appropriate. It is ready to mention on help pages and other Wikipedia resources as an option for new users to learn. To reduce server load and bad output, it should be improved by sandbox testing rather than repeated trial-and-error editing. |
![]() | This Lua module is used on 2,390,000+ pages, or roughly 4% of all pages. To avoid major disruption and server load, any changes should be tested in the module's /sandbox or /testcases subpages, or in your own module sandbox. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them. |
![]() | This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing. |
This was originally developed to optimize string concatenation as a helper method within Module:Asbox, but has been generalized for all modules.
The interface for Module:Buffer objects is similar to that of mw.html
objects in that you may build complex strings with independent child nodes. In most cases, you may use Buffer objects like a normal string, including using ..
operator. See also: #String, mw.ustring, and mw.text libraries
Additionally, there are several specialized forms and extended objects, described further in their respective sections:
Last but not least, this module has an ordered __pairs which can be more thorough than ipairs and pairs. (Even reads nil keys!) The logical uniqueness of this iterator may be reason enough to assimilate Module:Buffer.
Usage
[edit]
require'Module:Buffer'
[edit]require'Module:Buffer'
( ... )
require'Module:Buffer'
( _G, name, ... )
Creates a new Module:Buffer object when the module returned by require is called as a function—i.e., there is no 'main'.
Because public methods with useless parenthesis are a pet peeve of this developer, this forwards arguments to
Buffer:_
; if that op is not desired, you may chain a Buffer object function directly to the module and the self-action will be redirected to a new Buffer object—i.e require'Module:Buffer':_inHTML'table'
is equivalent to require'Module:Buffer'():_inHTML'table'
.[note 1]
The global variable
_G
is "magic" when passed as the first arg. Such enables the global functions and, if followed by a name
string, will declare the new Buffer with that name in the global scope. If the argument following name is a table with no metatable, it and any other
varargs are forwarded to
Buffer:_all
; otherwise, as long as the first vararg is not nil or false, this passes them to
Buffer:_
.[note 2] The _G passed may also gain a __call metamethod (details at _G object).
As a final note, if you
require text from a module which returns a Buffer object, it may be more efficient to create a new Buffer via chaining
after a require statement for the other module and use :_in
()
Buffer:_parent
()
at the point where you would append the required text. (Best add
--:_in == indirect require Module:Buffer
so future editors won't hunt for function ...:_in
at the other module)
Basic functions
[edit]
Buffer object
[edit]Get a Buffer as a
string via a function call on the Buffer object (as opposed to a call on the module). This is basically shorthand for
table.concat
, or, with no args, ( Buffer, sep, i, j )
tostring
. However, if this Buffer is in raw mode[note 3] or contains at least one non-sequential index, this reconstructs the Buffer by creating a new table, coercing it contents to strings and appending them sequentially to the temporary "buffer" via ( Buffer )
new-
Buffer:_all( Buffer )
Unconventionally, any
string-type position passed as i
or j
are treated as relative to length; that is,
Buffer
( '-', -1, '-3' )
is equivalent to
Buffer
( '-', -1, #Buffer - 3 )
(which obviates the need to declare a local Buffer just to use the length operator). Moreover, unlike table.concat, this automatically adjusts numerical[note 4] positions to be within the range of the lowest and greatest indicies.
Note you may append a Buffer object without tostring coercion to an mw.html object via
mw.html:node
(though not mw.html:wikitext because of type checking).
Buffer.last_concat
[edit]When strung without a (valid) sep
, the result is cached at Buffer.last_concat
. Until purged, future calls to return that Buffer as a string will return this index instead.[note 5]
This should clear automatically whenever a Buffer object function changes the contents of a Buffer. You may manually purge the cache by setting this key to nil, as well as by passing nothing to
Buffer:_cc
()
Buffer:_
[edit]Appends a value to the Buffer. In rough terms, Buffer:_'string1':_'string2'
is the same as Buffer = Buffer..'string1'..'string2'
. (It may help to imagine :_
as a ..
that has stood up and is now casting a shadow.)
If passed an invalid value
listed below, this is a no-op:
- boolean
- nil
- empty
string, or any table such that
tostring
returns an empty string (or nil/false)( table )
-
table without a __tostring metamethod and which
table[1]
is nil or false
A table with no __tostring will pass through
table.concat
before insertion. An
error may be thrown if the table would cause table.concat to error. (Use
Buffer:_all
instead for such tables.)
When passed pos
of type
number, the argument is identical to pos for
table.insert
. In fact, assuming a valid value, ( table, pos, value )
Buffer:_
( 'string', 1 )
is exactly the same as
table.insert
.
( Buffer, 1, 'string' )
Just like with the position arguments of Buffer(), any pos of type string would be treated as relative to length.
Set raw
to true to force append a value without tostring coercion, including invalid values. If given only two (non-self) arguments with the second being a boolean, then the second is read as raw instead.
Buffer:_nil
[edit]
Buffer:_nil
( pos, replacement )
Removes the value buffered at pos
. As with
Buffer:_
, a string pos string is treated as #Buffer + pos
.
If a non-boolean replacement
is provided, then it will replace the value indexed at pos. Passing a boolean as the second argument is a no-op.
When replacement is nil, the op is basically
table.remove
. As with the positional arguments of other Buffer methods, any numerical string pos is added to length, such that ( Buffer, pos )
Buffer:_nil'0'
removes the last item. Note the only type check on replacement is a direct comparison to both booleans (nil is implied). Any other type, including strings, sets the Buffer to raw mode.
A pos that is omitted, nil, or false has the same effect as though '0'
(or
) were passed. Given only one non-numerical argument which evaluates true but
tonumber would return it as nil, this treats it as though it were passed as the second. If passed a non-numerical pos with any other argument, including nil, this is effectively a no op (though may still purge the cache).
#
Buffer
Buffer:_all
[edit]
Buffer:_all
( { ..., value = pos, functionName = args, ... }, nanKeys )
Takes a table value
, iterates through all number keys in order, appending each valid value to the end of the Buffer. In contrast to
ipairs
, this starts at the most negative key (down to -inf) and ends at the most positive index, continuing through any nil keys and includes non-integer number keys.
A table value that has no metatable will have its contents iterated by this function before moving on to the next value. All other data types are processed by
Buffer:_
.
By default, this ignores non-number keys unless nanKeys
evaluates true. If so, non-number keys are processed after number keys. Keep in mind such keys are iterated in no particular order, though an order may be imposed by wrapping each pair in a table indexed at a number key.
If given a value = pos
pair, defined as a number or number string indexed at a non-number key, then they will be passed as the value
and pos
arguments for
Buffer:_. Thus,
Buffer:_all({1,2,3,'... done',[3.5]=variable and 4 or {four='1',zero=1}},true)
produces the same result as:
Buffer:_(1):_(2):_(3)
if variable then
Buffer:_(4)
else
Buffer:_'four':_('zero',1)--vs :_all{four='1',zero=1}; less redundant would be
end -- :_all{'four',zero=1}, but that doesn't demo string numbers
Buffer:_'... done'
--returns "1234... done" if variable evaluates true or "zero123four... done" if false
If a non-number key points to a value that cannot be coerced into a coerced into a number then the pair may be treated as functionName = args
, when functionName matches a Buffer object function and args is not boolean. If args is such that value[1]
evaluates true, then this will pass the return of
unpack
to the named function; otherwise, the value is passed as is.[note 6]
( value, 1, table.maxn(value) )
Buffer:_in
[edit]
Buffer:_in
( _G, name, save, ... )
Passes any arguments to Module:Buffer to create a new Buffer object, sets an external reference to the parent Buffer and returns the child.[note 7]
This does not append the child to the parent. (See Buffer:_out)
Also, be aware that Buffer parent references are weak. Thus, if you were to (re-)set a local variable that is currently set to the parent, such could trigger immediate garbage collection on the parent.
Buffer:_out
[edit]
Buffer:_out
( ops, sep–list, { default–sep, ..., [#] = sep } )
Joins a Buffer with sep
and appends result to its parent, which is returned. If no parent is found, this is a no-op and returns the same Buffer.
When given two or more arguments, this reads the first as ops
—the number of :_out() operations to perform.[note 8] This applies the first sep in sep-list
for the current Buffer, the second for its parent, the third for its grandparent, and so on.
If the last item is a
table, then any nil in sep-list default to table[1]
; any false mean "no-sep".[note 9] The table may be the second arg (i.e. sep-list may be omitted). If it has other keys, then table[n] would apply instead of table[1], making these synonymous:
Buffer:_out
( 4, nil, nil, nil, ' and ', {', '} )
and
Buffer:_out
( 4, {', ', [4] = ' and '} )
The number 0
is "magic" when passed as the first arg (even by itself), joining and appending to the same Buffer after it has been emptied. This is the only method by which a Buffer in raw mode may lose that status. Parent references are preserved.
Buffer:_str
[edit]
Buffer:_str
( ops, sep–list, { default–sep, ..., [#] = sep } )
Joins a Buffer with sep
and returns the string.
This uses the same helper method as
Buffer:_out
to handle multiple arguments, with which, if provided, this creates a new temporary Buffer to which this appends the results of the number of generations specified by ops
, with each ancestor in front of its descendants. This then performs one additional concat op using the sep at ops + 1
and returns the result. If a parent-less Buffer is reached before ops, then the sep that follows its op number will separate the generations.
When no valid sep is given, this returns a string identical to what would append to the next ancestor, if those arguments were passed to Buffer:_out instead and one additional :_out() op performed.
However, because this does not actually append child Buffers to their parent, the result may differ where this would insert the sep at ops + 1 and Buffer:_out would place the parent's sep between it and its child instead.
Buffer:_cc
[edit]
Buffer:_cc
( clear, copy, meta )
Nils all keys of the table referenced by clear
and unsets its metatable. If clear evaluates false, this simply purges the cache at
Buffer.last_concat
.
If given a table to copy
, this will duplicate all key-value pairs of copy into clear, cloning any table value recursively via Buffer:_cc(0, value)
. This returns the Buffer unless passed the number 0
as clear, which causes this to create a new table and return that instead. Passing true
as copy is equivalent to passing the Buffer itself. If copy is not a table, then it will be set as the first item in clear as long as it is not false.
While this may resemble
mw.clone
, there are several differences, namely that this:
- Gives clear the same metatable as copy (or sets
meta
, if given) as opposed to a "clone" of the metatable. - Conserves Length attribute (though empty strings may replace some nil keys[note 10])
- Rawsets values and iterates without invoking any __pairs metamethod.
- Includes Buffer parent and raw attributes (stored externally)
To obtain the key-value pairs left as empty strings in the previous copy op in a table, simply call this again such with value such that rawequal(clear, copy)
is true; call :getParent() on this table returns clear (useful after leeaving the local scope which referenced clear).
Buffer:_parent
[edit]
Buffer:_parent
( ops, sep–list, { default–sep, ..., [#] = sep } )
Resembling the reverse of
Buffer:_out
, this calls
Buffer:_str
on the Buffer's parent with the arguments given and appends the strung ancestor(s) to the current Buffer, which is returned.
The parent is unaffected by this operation and may still be retrieved via
Buffer:_out
or re-appended again with this function.
Buffer:getParent
[edit]
Buffer:getParent
( functionName, ... )
Returns parent Buffer, or, if none exists, creates a new Buffer and returns it as the adopted parent. As with
Buffer:_in
, this does not automatically append the adoptive child to the new parent.
Pass a non-false value
and this performs an op on the parent object.
If passed anything other than value (including nil), this requires that value names a function available to the parent object, which this calls and forwards the additional varargs.
Pass only a table value which has no metatable and this forwards value to the parent which calls
Buffer:_all
( value )
Given only a string starting with _
and naming a parent function, this calls it on the parent without arguments. Any other valid singular argument appends to the end of the parent Buffer.[note 11]
Buffer:killParent
[edit]Unsets Buffer parent reference.
If passed any args, they are forwarded to the current parent, if one exists, via Buffer:getParent as a "parting gift". In either case, returns the current Buffer.
This is not necessary for
garbage collection since Buffer parent references are weak. Rather, use this when it is desirable to assign a new parent via Buffer:getParent or, for example, to prevent the inclusion of an ancestor when passing
math.huge
as ops for functions such as
Buffer:_out (more useful when recycling Module:Buffer from another Module).
Stream mode
[edit]Buffer:stream
[edit]Switches a Buffer to stream mode. While streaming, the __call metamethod will append values to the end of the Buffer instead of the usual op.
Aside from that, there is only one other function:
. Any args passed to Buffer:stream are forwarded to that function for a reason that should be evident when you finish reading this very short section.
Stream–
Buffer:each
No special action is needed to exit this mode. The normal call to string op is restored upon the use of any regular Buffer function or any operation which coerces the Buffer into a string (e.g. the ..
operator).
Stream-Buffer object
[edit]Stream-Buffer objects accept only one argument which they append if valid. That is, the op is a streamlined version of
Buffer:_
sans the pos and raw args.
This also exploits the syntactic sugar of function calls to append a series of string literals (and tables) with nothing between them (or only ASCII space chars if desired).
For example, both A and B will produce identical strings:
local A = require'Module:Buffer':stream'A string of text may flow''with nothing between each string' 'or perhaps only a space'
'or even tab and line-break characters''and continue to append individually''for use with a joiner'
local B = require'Module:Buffer':_'A string of text may flow':_'with nothing between each string' :_ 'or perhaps only a space'
:_'or even tab and line-break characters':_'and continue to append individually':_'for use with a joiner'
mw.log(A==B, A:_str' ')
true A string of text may flow with nothing between each string or perhaps only a space or even tab and line-break characters and continue to append individually for use with a joiner
Stream-Buffer:each
[edit]Appends an undetermined number of valid values to the Buffer object.[note 12]
If the above line gives you Déjà vu, that is because it is drawn from mw.html:wikitext. However, unlike mw.html:wikitext, this does not stop at the first nil value.[note 13]
HTML library extension
[edit]Upon the first call to
Buffer:_inHTML
, Module:Buffer clones the mw.html object metatable, adding Module:Buffer's __eq and __concat metamethods along with a few additional functions.
Objects with this modified metatable are referred to as Buffer-HTML objects. Yet, though dressed in bells and whistles, they are only named with Buffer as an adverb since they lack most Buffer object functions.
In contrast, the Element-Buffer (returned by the function call on a Buffer-HTML object) is a true Buffer object with specialized "tricks" allowing complex structures to be built via both mw.html and Buffer object methods as well as through a builder that perhaps marries the best of both worlds.
Buffer functions for HTML
[edit]Buffer:_inHTML
[edit]
Buffer:_inHTML
( tagName, args )
Accepts the same parameters as
mw.html.create to create and return a modified mw.html object. As with
Buffer:_in
, this does not append the child object to the parent Buffer and instead sets a Buffer-style parent reference.
An exception to the above is when chaining this to an Element-Buffer and such produces a selfClosing tag; when both conditions are met, this appends the tag and returns to the same Buffer.[note 14]
Unlike mw.html.create, if args
has keys other than args.parent
and args.selfClosing
, it will pass for further processing through Element-BufferBuffer:_add (a cousin of
Buffer:_all that handles mw.html functions). Moreover, if passed a table where mw.html.create expects tagName, this treats it as args instead.
Finally, this does not automatically set the mw.html.parent
reference, making this an alternative to mw.html:tag
Buffer:getHTML
[edit]
Buffer:getHTML
( functionName, ... )
Available only after
Buffer:_inHTML
is used the first time.
Accepts the same arguments as
Buffer:getParent
, however this instead return the last Buffer-HTML object ("lastHTML") created, or, if available, the lastHTML passed to any of the following functions:
Buffer-HTML:_out (except when passed 0
)
Buffer:_html
[edit]Available only after
Buffer:_inHTML
is used the first time.
This (re-)appends the last Buffer-HTML object to the current Buffer object. The raw
and pos
args are generally the same as those in
Buffer:_
.
When called with no arguments on an Element-Buffer, this appends lastHTML without string coercion. Be warned however that if the Element-Buffer belongs to lastHTML or one of its tags, such will cause an infinite loop, which can be avoided by passing an explicit nil to append lastHTML as a string.[note 15]
HTML object functions
[edit]Buffer-HTML objects may be used like any mw.html object. (In fact, merely replacing mw.html.create
with require'Module:Buffer':_inHTML
in an existing Module should produce the same output.)
Most mw.html functions are unchanged, except
:tag
,
:done
, and
:allDone
are embedded in a wrapper function that checks whether they return a normal mw.html object. If so, switches the metatable to convert it to a Buffer-HTML object and sets a parent reference. [note 16]
As a side bonus, the ..
may be used on Buffer-mw.html objects directly (no
tostring
needed).
Buffer-HTML object
[edit]Call this object as a function to return its .nodes
index[note 17], which this converts to an Element-Buffer object, granting it the same metatable as regular Module:Buffer objects (as well as several additional "tricks") and assigning the Buffer-HTML as its parent Buffer.[note 18]
This takes one argument which is forwarded to its Element-Buffer. Tables pass to the specialized HTML builder
. All other #valid values are appended to its Element-Buffer via Element-
Buffer:_add
Buffer:_
.
You cannot chain call regular Buffer functions on a Buffer-HTML object; however, since mw.html functions cannot read Buffer-style parent references, modified versions of methods that return the parent Buffer are available to Buffer-HTML without having to call into the Element-Buffer. For convenience,
mw.html:allDone
is called automatically prior to the op, though after the lastHTML
reference has been set for
Buffer:getHTML
.[note 19]
0 if passed 0
as the first argument, these do not redirect the self-action via :allDone()
, however, these always return a Buffer-HTML object (think Element-Buffer:done(0)
). For :_out only, the "magic" number zero permanently consolidates
Buffer-HTML.nodes
(whether or not converted) just like :_out(0)
on a normal Buffer except it would not unset raw mode on an Element-Buffer.
$ When passed a valid sep for the first op, these temporarily[0] switch the Element-Buffer (or unconverted .nodes) with a table containing only the concatenated string before stringing the Buffer-HTML in the first op. As with the non-HTML versions, only :_out appends the string to the parent Buffer.
^ This takes arguments for
Buffer:_str
and calls it on the parent Buffer of the HTML tree, returning and appending the result to the same Buffer-HTML object. In other words, the "auto-allDone" doesn't really apply here, or at least not in the same sense as with the other functions. (As a reminder, Buffer:_inHTML does not append to the parent Buffer those Buffer-HTML objects which it returns.)
In addition to the above, global functions may be available to Buffer-HTML if enabled; these functions are the same for all Module:Buffer objects—i.e. the self action is never redirected.
Element-Buffer functions
[edit]
Element-Buffer object
[edit]Sharing the same metatable as with regular Buffer objects, Element-Buffers concatenate the same way when called to produce a string analogous to the JavaScript DOM "innerHTML" property. In other words, when strung, it is generally the contents of the Buffer-HTML object without the "outerHTML" or tag.
There are exceptions to this "innerHTML" behavior. For instance, as appended to another object via
mw.html:node
, an Element-Buffer and its Buffer-HTML are interchangeable (though appending the former via
Buffer:_
only includes the inner result).
Also, using the concatenation operator ..
on an Element-Buffer includes its tag in a manner depending on if it is selfClosing:
- For most tags, the conjoined string is placed inside the tag, e.g.
Buffer:_inHTML'p' 'inner text' .. 1
returns'<p>inner text1</p>'
. - For selfClosers, the
..
op redirects to its Buffer-HTML, e.g. insert:_add{selfClosing=true}
in the above example before.. 1
to produce'<p />1'
.
You may use most Buffer object functions normally, however if there is a Buffer-HTML version, it instead behaves as though chained on the outer HTML object.[note 20] You may also chain any mw.html object function. Unless otherwise indicated, such returns a wrapper method that merely redirects the self-action to the outside Buffer-HTML.[note 21]
As a final note, Element-Buffers are in permanent raw mode since it is expected that some mw.html method (e.g. :tag and :node) may or will append non-string elements.
Element-Buffer:done
[edit]When passed nothing, this should behave just like
mw.html:done
as called the "outer" HTML object—returning Buffer-HTML.parent
, if available, or Buffer-HTML if not.
However, this has been re-designed to accept ops
, the number of :done() operations to perform. Thus, Element–Buffer:done(4)
is equivalent to Buffer–HTML:done():done():done():done()
.
Pass 0
(zero) as dones to return to the Element-Buffer's direct HTML container.
Finally, keep in mind that Buffer-HTML objects use the original mw.html:done (albeit in a light wrapper).
Element-Buffer:tag
[edit]Element-
Buffer:tag( tagName, args )
Element-
Buffer:tag{ args–list }
This uses the same helper method as Buffer:_inHTML to handle arguments and produce new Buffer-HTML objects, selectively passing args to Buffer:_add when it contains keys not used by mw.html.create.
As may be expected, this differs from Buffer:_inHTML in that this actually appends the tag and will set a mw.html-style parent reference. This also lacks the other function's "auto-done" feature for selfClosing tags.
As with the other Element-Buffer remake of an mw.html method, the features described here do not apply to the version used by Buffer-HTML objects.
Element-Buffer:_add
[edit]Element-
Buffer:_add{ wikitext–list, { args–list }, ..., arg = value, functionName = args }
Takes a table as its only argument. This then thoroughly iterates all number keys from lowest† to highest using this module's custom __pairs method. Most values append as wikitext if valid. If a table is indexed at a number key, this recursively iterates the table before moving on to the next key.
After processing all number key-value pairs, this then iterates the other (non-number) keys. For those naming a core Buffer object function, this selectively unpacks args
in a manner described at
Buffer:_all
when that function is passed the nanKey parameter (excepting that this does not read numbers as pos, i.e. treats them the same way as strings).
This also accepts keys naming HTML and global functions as well as mw.html arguments. Thus, Element–Buffer:_add{ tag = 'br', 'text'}
appends a BR tag after the text and Element–Buffer:_add{ {tag = 'br' }, 'text'}
appends the BR before the text. Note however that how this handles args for such keys depends on the particular function or argument named:
args.argName
[edit]Element–Buffer:_add{ arg = value }
The effect of passing args with keys such as args.selfClosing
and args.parent
is the same as though args were passed to
mw.html.create
. This also takes one additional arg, i.e. args.tagName
, which value replaces the original tagName of the HTML object (or, if false, removes the tag).
Note that these are the only keys for which a boolean arg would result in an op. (For Buffer object functions that do not no-op when passed only a boolean, place the boolean in an args table for unpacking.)
args.cssName
[edit]Element–Buffer:_add{ cssName = cssValue }
A non-number key and value pair may default as the cssName
and cssValue
parameters for
mw.html:css
when the key matches none of the three argName keys nor the name of any available function for Buffer and mw.html objects.
This sends non-boolean cssValue though tostring prior to forwarding it to mw.html:css. Because this is the default, any typoed key goes to mw.html:css as cssName. Names of functions not yet loaded also end up there.
For convenience, any _
character in the key string is automatically substituted with the -
character; thus border_bottom_style =
is equivalent to ['border-bottom-style'] =
.
The form Element-Buffer:_add{ css = { cssName = cssValue } }
also works (or to clear a previously set value; see example at args.htmlFunction for more details).
Element–Buffer:_add{ tag = tagName }
Element–Buffer:_add{ tag = { tagName, args–list } }
Set the key args.tag
to a string and this calls
mw.html.create with it as the tagName argument. This then raw inserts the returned mw.html object ("tag"), emulating the effect of
mw.html:tag minus parent references, which are unnecessary.
Pair the args.tag key with a table value and this calls mw.html.create with table[1]
as tagName (or nil if #invalid), appending it as described above for string values, but also pointing tag.parent
to the Element-Buffer's parent as well as temporarily setting the tag as the parent Buffer of tag.nodes
. This then treats tag.nodes as a pseudo-Element-Buffer, recursing tag.nodes as "self" and the table as args, though only iterating keys not equal to 1
(or less).[*]
Note this appends normal mw.html objects. That said, most Buffer functions named in args-list should still work as though the tag and tag.nodes
were Buffer objects.[note 22]
Upon completing a recursive iteration for args.tag, this checks if the tag is selfClosing, in which case, this sets tag.nodes to nil. Likewise, if its tagName property evaluates false, this nils tag.styles and tag.attributes. Such presumes those properties will not be modified afterwards, so use mw.html:tag outside of Element-Buffer:_add if such is not the case.
Element–Buffer:_add{ done = wikitext }
Element–Buffer:_add{ done = { ops, args–list } }
Similar to args.tag, this treats the first index of the table as the ops argument of
. After calling that function, this then iterates all subsequent keys in a recursive call on the Element-Buffer of the Buffer-HTML object returned.
Element-
Buffer:done
args.allDone
[edit]Element–Buffer:_add{ allDone = wikitext }
Element–Buffer:_add{ allDone = { args–list } }
Similar to the previous two, except that the first index is not used as an argument; thus, the entire table is iterated.
Element–Buffer:_add{ globalFunction = name }
Element–Buffer:_add{ globalFunction = { name, save, args–list } }
Element–Buffer:_add{ _B = { var, args–list } }
If the global functions have been loaded and a key matches one, this calls the function with the first two arguments
unpacked from the paired args-list table. This then recursively iterates the list, excluding keys less than or equal to 2
, with whatever object is returned as self. However, if the returned object has a metatable and object.nodes
exists, the self will be object.nodes instead.
Because
Buffer:_B
takes only one argument, args._B only unpacks the first index and starts the iteration after that key.
If neither of the first two keys evaluate true, this assumes the paired value is a string for use as the name argument for the function matching its key.[note 23] In that case, the current call stack's self (an Element-Buffer or tag.nodes if this was called indirectly) is self for the global function.
args.htmlFunction
[edit]Element–Buffer:_add{ htmlFunction = object }
Element–Buffer:_add{ htmlFunction = { arg-list, name = value } }
If args.key matches an mw.html object function that does not have its own args section, this checks if the associated object is table. If not a table, or if object.nodes
evaluates true, this calls the mw.html function with the object as the only argument.
For table objects without an object.nodes, this iterates the table (non-recursively), repeatedly calling the named mw.html function with one or two arguments depending on key's type in each loop. Non-number key-value pairs are both passed as arguments. For numeric indices, only the value is passed. Boolean values are a no-op.
Unlike with most implementions of Module:Buffer's __pairs, this first loops through non-number keys, followed by number keys (still ordered from lowest to highest). Thus, something like Element–Buffer:_add{ attr = { 'width', width = 20 } }
is equivalent to Element–Buffer:attr( 'width', 20 ):attr( 'width' )()
, setting then unsetting the width attribute and returning the Element-Buffer for a net no-op (though the practical purpose of such is a mystery for this developer).
For args.css
only, this auto-replaces underscores with hypens for string keys—i.e., you may save four keystrokes/pair by typing css_property =
instead of ["css-property"] =
. This does not apply to strings indexed at number keys.
† Unlike with tables passed directly, recursive iterations for functions marked with † start at the smallest number greater than 1
instead of negative infinity.
‡ The iteration may start after 2
for some global functions.
Loadable convenience extensions
[edit]The methods here are loaded on demand or depend on subroutines which need initialization.
These methods can greatly simplify the structure of the modules which employ them by doing, in a fluent manner, many tasks which may otherwise force an awkward interruption in Buffer call chains.
Global functions
[edit]Methods such as
mw.html:done
and
Buffer:getParent
traverse a node tree in only one direction. While fine for returning to an ancestor, they do not provide navigation to a non-ancestor (often necessary for templates with co-dependent parameters). Yet, repeated breaks in call chains to set local variables for several nodes of the same branch can look choppy if not confusing for nodes many generations removed from its declaration statement.[note 24]
Templates with several conditionally-appended nodes with similar, but not identical, parts may present another conundrum for coders who must decide between having awkward call chain interruptions to store potentially repeated components as local variables or constructing a somewhat redundant module that is more susceptible to maintenance errors by future editors who may patch one code segment but miss the sibling buried within a convoluted nesting of logical operators.
This module's global functions and added syntactic sugar for the _G object were formulated to simplify such node trees with multi-conditional or repeating structures by providing concise in-chain variable declaration. The extension is enabled by passing your global table to the module—either in the initial call to require'Module:Buffer' (more instructions in that section) or to
Buffer:_in
which forwards arguments to Module:Buffer.[note 25]
Buffer:_G
[edit]Pass name
and save
to assign the object passed as save to a global variable via
rawset
.[note 26]
( _G, name, save )
Pass only name and this substitutes self for save to assign the Buffer object to _G[name]
instead. Give an explicit nil as save to unset a global. This returns the Buffer object as well as any argument given after name.
This is a no-op when name is nil or a boolean, or, when save (eventually) evaluates true and
rawequal
also returns true.
( save, rawget(new_G, name) )
If the named global already exists, this "backs up" the old value by moving it to the meta __index of the global table, setting a new metatable if none exists.[note 27] Retrieving the old value requires unsetting the new one via
Buffer:_R
(more details in that section). If overwritten a third time, the first value is discarded and the second takes its place in the back up.
If a metaglobal variable exists but the global is nil, this sets the global without unsetting the metaglobal (i.e. does not back up a nil global). An exception is when this is given an explicit nil as save and only the metaglobal exists; thus, passing nil twice for the same name, unsets the key in both the global table and its metaindex.
Buffer:_R
[edit]
Buffer:_R
( 'new_G', var, metaindex )
This
rawset with the global table as the first argument and name
and save
as the second and third, respectively, returning the Buffer object for call chaining.[example 1] This is a no-op if name is nil or a boolean.
Note that Buffer methods use a local variable new_G
as a proxy for the global table _G; though not a global index, the string 'new_G'
is a "magic word" that changes the destination for future save for this and Buffer:_G.
Pass a table as var
(same place as save) to set as the new new_G. Any table such that var._G == _G
is treated as a (former) new_G object. This gets the metatable of former proxies and sets a new table with the
_G object __call method on non-new_G tables. Then, this, if third parameter metaindex
equals:
- nil — backs up the current proxy as the metaindex of the next (though this no-ops if var equals new_G to avoid cyclical indexing).
- false — leaves the metaindex intact (replacing the current proxy without back-up)
- true — unsets the metaindex of the next proxy
- any other value — sets that value as the metaindex of the next proxy. (Note new_G._G is not set until it is returned by
To omit or to pass nil/false as var has the same effect as
Buffer:_R
( 'new_G', {} )
. Pass true instead and this treats it as though passed as metaindex, creating a new proxy without backing up the incumbent.
Buffer:_2
[edit]This returns the value indexed at key name
in the global table. If it does not exist, this forwards both arguments to
Buffer:_G
and returns the saved value (which may be itself).
In other words,
Buffer:_2
( name, save )
is roughly equivalent to
_G[name] = _G[name] or save or save==nil and Buffer
.
The string 'new_G'
will return the Module:Buffer local variable new_G
, used as a proxy for the global variable _G. Given more than one argument, this forwards arguments to
Buffer:_R
to assign another proxy global before returning the (newly-deposed) proxy. This then sets new_G._G
to the original _G object for call chaining. (See § chain call in _G object).
Buffer:_B
[edit]Takes only one argument and returns that argument.
Assuming the only X declared is _G.X
and new_G equals _G, then
Buffer:_B
(X)
and
Buffer:_2
'X'
are equivalent.[note 28]
When passed a variable that does not exist, this returns the Buffer nil object:
Buffer-nil object
[edit]
Buffer-nil:anyName
():_B( var )
The Buffer-nil object is unique. Calling this as a function returns nothing (in contrast, calling an empty Buffer object returns an empty string). This does however have the Module:Buffer __concat metamethod, which treats this the same way as any invalid object (i.e. ignores it).
Appending this via
mw.html:node
or
Buffer:_
has the same effect as appending nil. Passing this to
tostring returns nil instead of the string 'nil'.
The only real Buffer method in its meta __index is
Buffer:_B
, however, any non-numerical key string retrieves a function that only returns the Buffer nil object for call chaining. In a sense, you can think of Buffer:_B(var):...
as an if var~=nil then var:...
block around the following chain that ends in the next :_B().
If cloned, the clone will be a normal Buffer object.
_G object
[edit]The first _G variable passed to this module is given a __call metamethod that self- rawsets and returns in a manner that depends on whether it was called directly or from a chain.[example 2] This module conserves any pre-existing metatable and alters no metamethod other than __call.
direct call
[edit]_G( k, v )
_G'string'
When called, the _G object self-sets any string passed as k
with whatever is passed as v
. This returns v, or nil if omitted (unlike with rawset, an explicit nil is not necessary to unset a variable with direct calls).
Note that k must be a string to declare or unset a global in this op. Tables passed as the first argument are treated as though this were executed via a call chain (discussed shortly). Passing k which is not one of those two types will throw an error.
chain call
[edit]chained-object:_G( k, v )
chained-object:_G'string'
When used in a call chain, this rawsets the key-value pair in the chained object and returns that object. The _G object may chain itself when returning _G is desired for another op instead of v.
In contrast to the direct op, the in-chain op will index non-string k values. Moreover, this only unsets object[k] when passed an explicitly nil v.
If v is omitted in-chain, this uses the chained object as the missing argument; thus, (chained) object:_G'string'
has identical effect and return to _G('string', object)
.
The same __call method is given to new_G objects created by Buffer:_R, however the direct call only works if its metaindex is the _G object. Any table such that table._G
points to the _G object may chain save to itself regardless of metaindex.
Though the behavior of the chain op when v is omitted may be a dead ringer to that of Buffer:_G when save is omitted and new_G is the chained object, mind that the Buffer object function sets keys in new_G variable rather than the chained (Buffer) object; in other words, this is unaffected by Buffer:_R reassigning new_G to another table. Also, this does not have the back up behavior of Buffer:_G.
Buffer-variable object
[edit]Buffer:_var
[edit]Raw appends a Buffer-variable object, which may appear as a different value each time the object (or its container) is converted to a string.[example 3]
Initialize a Buffer-variable object by passing as var
a:
- number - which, when strung the first time, appears as that number and reappears as
var + change
the next time it is strung. - string - that transforms into the next ASCII character via
string.char
.( var:byte() + change )
- table - to return the first (non-nil) item, then the second, and so on as determined by
next
, looping back to the first item after reaching the last. (Note the change argument does not apply to table-based Buffer-variables.)( table )
- custom function - to be set as the _build and __tostring method of a variable-object, though instructions for coding such functions are beyond the scope of this manual.
Re-append the same variable object by passing true
as the only argument. For non-table-based variables, you may specify change to append a sister object which transforms the value at the rate specified. Changes are cumulative. Thus, if the original is re-strung after a sister, its value will differ from that of its last appearance by the sum of the original and sister rates and vice versa.
Apply a change without appending a new variable object to the Buffer by passing false
. The shift is effective immediately and may affect previously appended variable objects not yet finalized. Pass only false (i.e., omit change) to produce the same effect as stringing the original once. Note that the false-change is the only change table-based Buffer variables will honor.[note 29]
Pass nothing to append a version which simply repeats the result of the last stringing. While generally identical in effect to the object generated by :_var(true, 0)
, the Buffer-variable will return nothing if strung before any of its sisters.
If passed an explicit nil as the first argument, this is no-op. If passed a boolean before any Buffer-variable has been initialized, this is also a no-op. Note that any op disables future caching at Buffer.last_concat for all Buffer objects in your module (and in any module which may require it).
String, mw.ustring, and mw.text libraries
[edit]Basic usage
[edit]Buffer:functionName( ... )
You may directly chain any function from the following libraries on Buffer objects:
Functions from these libraries added to the Module:Buffer metatable on-demand and placed within a wrapper method that strings the Buffer object for the first argument and then forwards the remaining arguments.
Thus, the following are equivalent: Buffer:nowiki( ... )
and
mw.text.nowiki
( tostring(Buffer), ... )
If a name exists in both the string and mw.ustring libraries, the string version takes precedence. You may prefix the letter u on any mw.ustring function—e.g. Buffer:ulen returns the number of unicode characters and Buffer:len returns the number of bytes.
Buffer:gsub and Buffer:ugsub have a slightly different wrapper which substitutes the repl
argument of
string.gsub and
mw.ustring.gsub when it evaluates false or is omitted with an empty string (otherwise the originals would throw an error). This saves a few keystrokes when removing characters via Buffer:gsub'[pattern]'
as opposed to Buffer:gsub( '[pattern]', '' )
. All other arguments are handled the same as with the other on-demand methods.
Library functions which take a non-string as the first argument are not supported.
Empty Buffer interface
[edit]
Buffer:_in
():functionName( ... )
To obtain the first return value as a Buffer object (as opposed to whatever type the original normally returns), simply chain the imported method immediately after creating the new Buffer via Buffer:_in. Only empty Buffer objects which have a parent object will append the result of their parent in this manner.
This syntactic sugar allows two things:
- For appending additional objects after the op via Buffer object methods.
- For chaining multiple Scribunto methods not chainable to strings—e.g., this:
Buffer:_in():uformat( ... ):_in():toNFD():encode'[<>#]':match'^(.-)==='
- vs. the following which has the same order of operations albeit harder to see:
mw.text.encode( mw.ustring.toNFD( Buffer:uformat( ... ) ), '[<>#]' ):match'^(.-)==='
Special case: Element-Buffer
[edit]empty–Element–Buffer:functionName( ... )
Element–Buffer:_in():functionName( ... )
The 'empty' behavior is different when chained to empty Element-Buffer or an empty child Buffer of an Element-Buffer.
Library methods chained to an empty Buffer which parent is an Element-Buffer object will instead string the grandparent Buffer-HTML object for use as the first argument before appending the result to the new Buffer. This interface is provided because Buffer-HTML objects, which are not true Buffer objects, are unable to load these functions, making this the only chainable option for Scribunto methods that includes the outer tag of non-empty Element-Buffers.
Chained on an empty Element-Buffer, these methods will string the Buffer object which created its HTML tree via
Buffer:_inHTML
[note 30] and append the result to the Element-Buffer.[example 4]
Modified ..
operator
[edit]All "true" Buffer objects—e.g., the regular, stream, and element varieties—share the same __concat metamethod. Some Buffer-like classes, namely Buffer-HTML objects and the Buffer-nil object, also have this same metamethod.
The extended ..
operator does not append to Buffer objects. In other words, Buffers generally remain the same as before the op excepting those effects that apply whenever Buffers are strung (See
Buffer.last_concat,
stream mode, and
Buffer-variable).
with non-tables
[edit]Buffer .. value
value .. Buffer
Any non-table value
may be joined a Buffer object with the concatenation operator ..
without error.
With the exception of Element-Buffers (which are a special case), the op passes each object, ordered left-to-right, to
Buffer:_
which inserts validated items in a new table, which this returns through
table.concat.
Concatenating an invalid value and a Buffer has generally the same effect as
tostring
unless such involves:
( Buffer )
- the Buffer-nil object — which produces an empty string (instead of nil)
- Element-Buffer objects — which returns the string of the parent Buffer-HTML
with tables
[edit]Buffer .. table
table .. Buffer
The same general operation applies for tables as with non-tables—i.e., validated values are inserted left-to-right into a new table to be joined by table.concat. In fact, tables which have a metatable (including Buffer objects which are not an Element-Buffer) are forwarded to Buffer:_ and processed the same way as non-tables.
Given a table
for which
getmetatable returns nil or false, this instead forwards the table to
Buffer:_all
, which iterates every value indexed at a number key in sequential order, inserting those which are valid in the new table.
As a reminder, Buffer:_ validates tables with metatables that lack a __tostring method through table.concat, which throws an error on sequences containing one or more value that is neither a string nor a number. Such accounts for nearly all cases of breaking errors involving this op.
Note that the valKey parameter of Buffer:_all is not triggered.
for Element-Buffers
[edit]Element-Buffer .. value
value .. Element-Buffer
Element-Buffer .. Element-Buffer
To recap and expand upon § Element-Buffer-object, the behavior of this op depends on whether its parent Buffer-HTML is selfClosing or if the other value is also an Element-Buffer. Also, the final result always includes the outer HTML object (i.e., the tag) in some manner.
For Element-Buffers of "open" tags, this op creates a table with a metaindex that references the parent of the Element-Buffer. The table is then effectively a "mirror" of the parent Buffer-HTML object except that it contains an empty table at table.nodes
— the index of the Element-Buffer within its parent. This then populates the mirror's inner table with the string of the Element-Buffer and the other value, validated left-to-right, in a manner not unlike what this does with the temporary table it creates when concatenating non-element Buffers to another value. This then returns the mirror table through the __tostring metamethod of the mw.html library, yielding a string which resembles that of the parent tag but with value inserted in front of or behind the original inner text depending on whether value was to the left or right of the ..
operator, respectively.
When the selfClosing property of the parent evaluates true, this operates on the parent instead of the Element-Buffer—i.e., the resulting string will have value on the outside as opposed to within the tag (placing it inside would be pointless since selfClosing tags do not show inner contents).
If both operated objects are Element-Buffers, this mirrors the parent of the first. The inner table of the mirror is then populated by inserting the string of the first Element-Buffer followed by the string the parent Buffer-HMTL of the second. The resulting string would be as though the parent of the second were the last node of the first parent. Note that this Element-to-Element rule does not apply when the first Buffer belongs to a selfClosing tag (in which case, this behaves as though the selfClosing parent were to the left of the operator, returning a string with the selfClosing tag inside the tag of the second Element-Buffer in front the latter's inner contents.)
Finally, this combines an Element-Buffer and a table value which has no metatable by passing the table as args for
with the mirror of the Element-Buffer as the "self". This avoids permanently changing the parent Buffer-HTML by setting a new table at Element-
Buffer:_addtable.attributes
or table.styles
in the mirror the first time methods such as
mw.html:css,
mw.html:attr,
mw.html:addClass, etc. attempt to access those tables, copying the original's via the recursive form of
Buffer:_cc
. Note however that permanent changes may be made to other objects whenever methods such as via
args.done
or
args.globalFunction
are keyed to navigate beyond the mirror or "sandbox".
require'Module:Buffer'.__pairs
[edit]require'Module:Buffer'.__pairs( table, flag, ext )
Returns two values: an iterator function and the table
. This is intended for use in the iterator form of for
.
One distinctive feature of this pairs method is that it splits keys into two groups:
numbers and non-numbers. This indexes each group of keys in its own "map" object, traversed by its own iterator function—i.e, iterating both sets of keys requires two separate for loops. Numeric keys are served in an orderly fashion as with
ipairs
except that those which are negative, non-consecutive, and non-integer may be included. Moreover, this can find some keys paired with explicitly nil values.[example 5]
The flag
argument selects the iterator method returned for that loop. When flag is an explicit nil or omitted, this returns an iterator for number keys. If given any non-nil flag (i.e., false or any value that evaluates true), this returns a method for looping non-numeric keys. Because both sets are mapped at the same time, you may avoid a redundant mapping op in a subsequent loop by passing an explicit nil or false as flag—i.e., omitting flag or passing true indicate that re-mapping is desired.
This automatically selects certain tables for "mapless" iteration. Typically, mapless differs from mapped only in that it uses fewer server resources, though, as explained in the next section on mapping, it may "miss" keys in some cases.
Mapping behavior may be modified or extended by ext
. To disable mapless iteration for the table, you may pass false as ext. If not nil or false, ext must be a pairs method that takes the table as its only argument and returns a function that may iterate its keys for mapping purposes. Note that re-mapping avoidance via flag does not apply if ext is explicitly given, though a nil ext does not disqualify a table from mapless iteration.
Mapping process
[edit]Tables are mapped in two stages.
The initial stage is a numerical for loop which inserts integers between 1
and #table
in the number key map. Because nothing is checked in this step, this may map keys which the numeric map iterator would pair with nil values or with values from the table's meta __index.
The second stage explores the table's keys with an iterative for loop and next, table
as the default expression-list, or, if ext evaluates true, the expression returned by ext( table )
. This ignores keys already mapped in the first stage and checks if any unmapped key is a number before indexing it in the appropriate map group. Upon completion, if any new number key were found in the second stage, this runs the numeric map through
table.sort. No order is imposed on the non-numeric map.
Alternatively, a table may qualify for "mapless" iteration if
rawget
is not nil, and ( table, 1 )
next
returns nil. If either flag or ext are not nil, or if the table was previously mapped, such permanently disqualifies a table for mapless processing.
( table, #table )
As a side note, if mapless numeric iteration occurs, this returns iterator, table, nil
. In other words, you may use
select
to confirm that the table qualifies for mapless iteration when it has a third explicit return (for debugging).
Iterators
[edit]One of four functions may be provided in the expression-list returned by this pairs method, depending on which group of keys (numeric or non-numeric) and which iteration process (map-based or mapless) is indicated.
When key
is nil or unspecified, map iterators will return the key object referenced by the first index of the relevant map along with the value it indexes. If passed the first mapped key, these iterators then return the second index mapped, which if passed in turn may retrieve the third and so on until the last mapped key has been served.
For numeric iteration, the mapless method returns 1, table[1]
when key is unspecified. If a key is given, it returns key + 1, table[ key + 1 ]
unless key is greater or equal to the length of the table, upon which it returns nil. For non-numeric keys, the mapless "iterator" is actually a no-op (empty) function which takes nothing, does nothing, and returns nothing—provided only to prevent an error when the for loop expects a function.
As mentioned (using different words), key-value pairs are served independently of whether or not table[key]
exists and retrieved without using
rawget
.
For example, take a look at table x as declared in the following statement: {{{1}}}
. Table x has a length equal to 8. With ipairs, the for loop stops after the first pair. In contrast, this module's __pairs method will loop all 8 keys declared—i.e., (1, 1), (2, nil), ... (7, nil), (8, 8). That said, this only iterates two keys if table x were declared as {{{1}}}
instead even though such is indistinguishable to Finally, the loop would continue to include any keys set to nil after the mapping process.</ref>
You may assign these iterators to a local variable to use them directly. If an unmapped table is given to a map iterator, it will forward the table to this pairs method for immediate mapping. Though no map table is produced for the mapless iteration, the pairs method does cache the length of the table at a map reference, which the iterator compares against key to determine when to stop. Unlike the map methods, the mapless iterator does not call the pairs method when such has been bypassed and instead compares key to the value returned by the length operator, which may be unstable if the loop includes code that sets or unsets indicies within the table. Also, the mapless method will throw an error if given a table that has been mapped (when it attempts to compare key to a map object).
Appendix
[edit]
Tips and style recommendations
[edit]- If joining Buffer with a string immediately after
:_'text'
, place a space between 'string' and the separator and use double/single quote marks to . (i.e.:_'text' " "
instead of:_'text'' '
or:_'text'(' ')
) - Saving Module:Buffer locally, e.g.
local Buffer = require'Module:Buffer'
, though fine, is often unnecessary since all Buffer objects can create new buffers via
For
Buffer:_
- Treat
:_
as though it were a..
op. Wrapping strings with unnecessary()
is akin to( 'string1' ) .. ( 'string2' ) .. ( 'string3' )
. - To insert an empty string as a placeholder for a separator without setting
raw
, pass a table containing only an empty string, like so:
Buffer:_{''}
- Raw appending a non-table is pointless since no other Scribunto type can tostring differently afterwards. However, this developer believes you are smart enough that
raw and type(v)=='table'
is a waste of server resources. (Such checks are why mw.html:wikitext takes twice as much time to append a list of strings as Stream-Buffer:each despite their near-identical roles in an Element-Stream-Buffer).
For
Buffer:_out
and
Buffer:_str
- Something like
Buffer_str(2, false, A, false, {C, B})
will use variableA
as the parent's separator, orB
instead if A is nil, orC
if both A and B are nil.
For
Buffer:_all
- Appending values in multiple locations is one of the primary reasons why the nanKeys argument exists. While passing a boolean directly will cause an error, you can do something like...
- this:
Buffer:_all({condition and {_nil={'0', 'replacement'},Front=1,getParent='from child'}}}, true)
- versus:
Buffer:_nil('0', condition and 'replacement' or false):_(condition and 'Front', 1):getParent(condition and 'from child'):_B(child)
.
- this:
For
Buffer:_cc
- If the table reference passed as
clear
was appended raw in multiple positions, this is akin to performing
Buffer:_nil
at all positions simultaneously. (May be easier than trying to come up with a
string.gsub
pattern)
- Inserting a named empty table is raw as a placeholder to be populated later via this function may be easier than calculating pos argument of
Examples
[edit]- ^ The following demonstrates how, by combining Buffer:_R and Buffer:_G, the global variable v can be declared, backed-up and replaced, replaced without back-up, restored from back-up, and removed completely:
require'Module:Buffer' (_G,'v') -- call module with global functions enabled and declare new buffer as v :_'A' -- append 'A' to the returned buffer :_G('v', 1):_(v) -- _G.v = 1, shift old value (the buffer) to metaglobal.__index :_R('v', 2):_(v) -- _G.v = 2, discard old value (1) without back-up :_R'v':_(v) -- unset _G.v, which now defaults to metaglobal.__index.v (the buffer) :_G('v', nil)", " -- remove back-up and join the buffer with a separator ..' and '..tostring(v)-- returns 'A, 1, 2, A12 and nil'
- ^ Saving a new_G object globally via a chain call can prevent conflict. The follow example has a hypothetical "Module:X" that may overwrite globals declared by your module or unwittingly discard your new_G when it passes _G to Module:Buffer (passing _G to this module resets new_G to the global table even when the global functions are already enabled):
return require'Module:Buffer'(_G)--Return before require to show intent to return a Buffer object; chain cannot be broken :_R(frame.args.title and --store values outside global scope if invoked with title parameter 'new_G') :_G'myBuff' --save current Buffer in new_G :_2'new_G' --retrieve new_G :_G'my_G' --save new_G as global my_G :_G('t', --save title object as my_G.t for later re-use mw.title.new(frame.args.title or frame.args.page) ).myBuff --go to my_G.myBuff (my_G lacks the Buffer:_2 method, but doesn't need it) :stream(my_G.t.exists --just arbitrary code to show how in-line storage may be used without breaking the chain or warning(my_G.t), --local function warning() declared before return require'Module:X'.main(my_G.t), my_G.t.isSubpage and subpage(my_G.t), ... ) :_R('new_G', my_G) --set my_G as new_G again and have the new_G from Module:X as its metaindex :_(frame.args.detail and my_G.info :_(frame.args.detail)--append Buffer object from Module:X's new_G.info if args.details and it exists; append detail param to result or my_G.summary) --just append summary from Module:X if not invoked with detail param. :_B(t and --use global t as a shorthand for "if not frame.args.title then" (t only declared a global in line 2 if no title given) myBuff :stream(frame.args.page, frame.args.details2, mw.html.create'br', require'Module:Y'.main(frame)) or my_G.myBuff --place results in a table if invoked with title param (alternative chain call branches within Buffer:_B) :_inHTML'table'(_addArgs) :_parent() )
- ^ The following contrived example demonstrates most features of
Buffer:_var:
local H, sep = require'Module:Buffer':_inHTML('div',{'Heading ',_var={nil,'odd','even'},color='blue',['text-decoration']='underline'}) :_out():_html(true):_html(true):_html(true) sep = H:_in'This is ':_var():_' - ':_var'A':_var(3,-1):_'\n' return H:_in(H(sep)):_(sep) :_'math:':_var():_'+ 5 =':_var(true,5):_';':_var():_out(0,' '):_var(false):_' - 1 = ':_var() --[[ produces: <div style="color:blue;text-decoration:underline">Heading odd</div>This is odd - A3 <div style="color:blue;text-decoration:underline">Heading even</div>This is even - B2 <div style="color:blue;text-decoration:underline">Heading odd</div>This is odd - C1 <div style="color:blue;text-decoration:underline">Heading even</div> This is even - D0 math: 0 + 5 = 5 ; 5 - 1 = 4 --]]
- ^ Compare the comment and source:
--[[--= Result: ===> This is just a quick example to demonstrate a neat concept: <div>Notice how the same object is strung which allows you to recycle boilerplate text. <p>3 is 1 added to 2.</p> <span>Though this is not really realistic to be fair... Edit: not realistic at all</span> I hope such is much to your liking.</div> --]]--= Source: ===> require'Module:Buffer' '%s is %s to %s.'--A :_inHTML'div'():format('Notice how the same object', 'strung which allows you', 'recycle boilerplate text') :tag'p'():format(3, '1 added', 2) :done() :tag'span'():format('Though this', 'not really realistic', 'be fair..') :_in():sub(21, 29) :_('\nEdit:', 1) :_'istic at all' :_out() :done() :_parent()--B :_out'\n' :format('This', 'just a quick example', 'demonstrate a neat trick',--A 'I hope such', 'much', 'your liking')--B :gsub('trick.', 'concept:\n')
- ^ Take a moment to look at the following tables X and Y:
local X = { [5] = 5 } local Y = { nil, nil, nil, nil, 5 }
These tables are indistinguishable to
ipairs
andpairs
(ipairs iterates nothing and pairs yields only one key-value pair for either table).While this module's __pairs method also gives only one pair for table X, it loops all five explicitly declared indicies for table Y, as shown in the console input below with Module:Buffer as p:
for k, v in p.__pairs{ [5] = 5 } do mw.log(k, v) end 5 5 for k, v in p.__pairs{ nil, nil, nil, nil, 5 } do mw.log(k, v) end 1 nil 2 nil 3 nil 4 nil 5 5
Notes
[edit]Non-literal interpretations of the source code (that is, more opinion than fact) are provided here to offer additional clarity. Overly technical details may be found here as well when including such caveats appears more likely to confuse than help those advanced-but-not-quite-fluent in Lua.
- ^ For your convenience, the self operator
:
and.
are interchangeable when used on the Module directly, though the self-op is required for nearly all other interactions with objects created by the Module. - ^ Passing arguments after name is primary used when
Buffer:_in
is indirectly called byBuffer:_all
or
. For example:Element-
Buffer:_addrequire'Module:Buffer'(_G,'arg'):_all({'arg',arg and {' was saved:' ,_in={_G, 't', ' awesome'}}}, true):_(t and {t(), t..'r', t..'st'})
produces:arg was saved: awesome awesomer awesomest
- ^ Cite error: The named reference
raw
was invoked but never defined (see the help page). - ^ Later sections may describe values as being numerical or numeric. Though perfect synonyms in normal usage, these adjectives are not interchangeable here. For the purposes of documenting Module:Buffer, numerical includes both actual number values and string values which
tonumber
does not return nil (and often involves Buffer-style length relativity); numeric describes values of number type only.( value )
- ^ Using Buffer:_var prevents future caching on all Buffers, though Buffers which already unmodified Buffers will continue to return their cached version
- ^ In other words, if args is a string or a table without [1] set, it will be passed as the only argument. Further note it is not possible to pass a
functionName = args
pair where args is numerical since such would be read asvalue = pos
. Finally, passing a function type as args will throw an error message. - ^ a b There is no 'getChild' method. If a child needed after returning to the parent, set it locally or use
Buffer:_G
prior to returning or it may become irretrievable. (No, Codehydro did not get lazy. Rather, this allows garbage collection on children with no further purpose.) - ^ The first arg is not type checked but read as ops only when multiple args are present (or if it is the number 0); i.e.,
Buffer:_out(2)
uses2
as a separator. To append to the Nth ancestor with no separator, useBuffer:_outs(N, nil)
. - ^ Empty strings would produce the same output as false, however, Lua string literals create objects that take up memory until garbage collected.
- ^ For example, given
{nil, 'string'}
as copy,Buffer:_cc(clear, copy)
makes#clear
equal2
, whereas#mw.clone{nil, 'string'}
equals0
(as of March 2015). This replicates length by filling clear halfway to the length of copy (the minimum needed to 'trick' Lua) and then setting nil every key that would not trigger recalculation. As a result, keys that would resize clear when set nil are left as empty strings. Such should be fairly rare; given tables representing every possible way to position a single nil key for all lengths between 2 and 32 (inclusive), only 8.39 percent of such tables would have its nil copied as an empty string instead.Also note that tables returned fromBuffer:_(0, copy)
have length declared on creation instead, and thus won't have extra strings attached. The odds can be estimated using , where is the upper limit that an arbitrary nil key from copy of length ranging from 1 to is imaged as an empty string. - ^ In other words,
Buffer:getParent
is shorthand for'_nil'
Buffer:getParent
, however,():_nil()
Buffer:getParent
simply appends "match" to the parent. Note that you may still call'match'
on a parent viaBuffer:match
( pattern )
Buffer:getParent
.( 'match', pattern )
- ^ This is no different than calling the Stream-Buffer object directly with each item in the
expression list
; however, after noting how numbers and variables (too shy to skinny dip without parenthesis) could look rather odd swimming fully clothed in a stream of naked strings, this was made for those whose aesthetics prefer
overStream-
Buffer:each('A',arg,'B',arg2)
Stream–Buffer'A'(arg)'B'(arg2)
. - ^ If you want something like
:wikitext('string1', varName, 'string2')
such that varName is shorthand for anif
statement that appends varName and 'string2' when the former is not nil, use:each('string1', {varName, 'string2'})
instead. - ^ That is, Element-Buffer
:_inHTML'br'
may be shorthand for:tag'br':done()()
when planning to continue using Buffer object functions. This "auto-done and back" for selfClosing tags does not apply to non-element Buffers in order not to encourage the use of Buffer:_inHTML for simple tags as per #Tips and style recommendations. - ^
Buffer-HTML:_parent
serves a similar role, but appends Buffer objects rather than HTML objects. Also Buffer-HTML:_parent only appends the string form of its ancestor object(s). - ^ Buffer(-HTML) objects reference their parent differently from mw.html objects. Passing a normal mw.html object to Buffer:_inHTML as
args.parent
and then calling:done
the object created, followed byBuffer:getParent
on the adopted parent, may return the "child." This is a feature rather than a bug. - ^ —the internal table which holds elements appended via mw.html:wikitext, mw.html:tag, and mw.html:node
- ^ Passing arguments for
via the args parameter ofElement-
Buffer:_addBuffer:_inHTML
andBuffer-HTML:tag
during the creation of a new Buffer-HTML object is the only way to use most Buffer object functions on the new HTML object without converting its.nodes
into an Element-Buffer. - ^ That is, Buffer:getHTML may be used to return to the child node, though the trade off is that you may still need to call mw.html:allDone before using these methods in order to append the full HTML tree via Buffer:_html.
- ^ While Buffer-HTML objects may use #global functions, there is no separate Buffer-HTML version. In other words, the self-action of a global function on an Element-Buffer is not redirected.
- ^
mw.html:allDone
is doubly wrapped for Element-Buffers, with the other wrapper setting a Buffer parent reference as described atBuffer:_inHTML
. Furthermore,
andElement-
Buffer:tag
do not call their mw.html namesakes at all, as detailed in their respective sections.Element-
Buffer:done - ^ However, some Buffer methods may not work properly after appending objects via mw.html functions to the pseudo-Buffer.
For example,{ tag = {'div', 'List:', foo1, foo2, foo3, _out = { 0, '\n*' } } }
could produce a div with each foo as bulleted item. But, if foo1 were{ tag = { 'b', 'text' } }
, then Buffer:_out may fail when appending table.concat with the non-string/number element. A workaround is to add the pair_ = {true, true}
to set raw mode on the div's tag.nodes; another is to replace foo1 withmw.html.create'b':wikitext'text'
, which appends in string form. - ^ A caveat of this unconventional type checking is that pairing an args.globalFunction with a number value will throw an error (which shouldn't be a problem since numbers make poor names for global variables).
- ^ i.e., does x, in the following, reference the TD or some other node hidden within an ellipsis?:
local x = mw.html.create():tag ... :tag'td' ... :tag(arg and 'div' or 'p'):wikitext( ... ):tag'br':done():done()
- ^ Global function are not enabled by default for various reasons:
- Most templates are one-dimensional (i.e. contain few if any nested conditional statements) and thus would not benefit from these methods.
- Loading them to the Module:Buffer meta index means more items that must be sifted through each time a specific function has to be retrieved.
- Lua checks the global scope last; thus retrieving values from that scope takes longer than it would if they were stored in the local scope.
- Excess use may clutter the global scope enough to slow access to basic Lua functions (e.g.
type
orpairs
) even after Buffer methods are no longer used.
do ... end
blocks to limit scope size. Yet,Buffer:_
, a core function which has changed little, is only a modest 10 percent faster than itself in the last unscoped version (not published); then again, perhaps the benefit of scope dieting has been masked by much greater total number of variables required by new features? - ^ Actually, the first argument to rawset is a local variable
new_G
which generally equals _G but not always, to be detailed in a later section. - ^ If the meta global has an __index which is a function, the back-up op aborts without throwing an error.
- ^ Dubbing this a "global function" is bit of a misnomer since this never retrieves anything from the global table. While designed for in-chain navigation to Buffer objects that were self-declared as globals, this returns any local reference or literal passed as well (allowing
to execute Buffer methods on non-Buffer objectsElement-
Buffer:_addargs._B
). - ^ False cycles tables based on
# instead of
next
, which may diverge or error if the table contains nil items. - ^ Though this strings the same object returned by
Buffer-HTML:getParent
, that function is not used to avoid setting a "lastHTML" reference.
See also
[edit]- Module:Escape, a lightweight metamodule for customized string character escaping
--[[=============================
This Module was written by Alexander Zhikun He, also known as, User:Codehydro on the English Wikipedia
All methods were developed independently and any resemblance to other string buffer libraries would be coincidental.
Furthermore, many methods will not work when compiled by standard Lua libraries as they depend on behaviors unique to
the MediaMiki Scribunto mod, which, for example, has a getmetatable() method that always returns nil on non-tables.
https://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual
Source code comments may be thin at some points because they are intended to be supplemented by the documentation page:
https://wiki.riteme.site/wiki/Module:Buffer/doc
Licensed under Creative Commons Attribution-ShareAlike 3.0 Unported License
https://wiki.riteme.site/wiki/Wikipedia:Text_of_Creative_Commons_Attribution-ShareAlike_3.0_Unported_License
https://wiki.riteme.site/wiki/Module:Buffer
https://wiki.riteme.site/wiki/User:Codehydro
============================= -- ]]
-- Performs type validation
local function Valid(v)
if v and v ~= true then --reject nil/boolean; faster than 2 type() comparisons
local str = tostring(v) --functions not filtered since unlikely passed by accident (Scribunto does not have userdata/thread types)
--tostring(string-type) returns same ref; same refs compare faster than type()
if str ~= v and str == 'table' then
return rawget(v, 1) and table.concat(v)
end
--numbers are coerced to string per table.concat op; appending in string form saves ops on repeat concat
if str ~= '' then
return str
end
end
end
local MBpairs
local noOp = function() end
do
local iMap, vMap, oMap, pIter, pOther, pFast, Next --Map
local function init() -- init = noOp after first run
function Next(t)
return next, t -- slightly faster to do this than to use select()
end
function pIter(t, k)
-- don't use rawget; accepting unmapped tables does not measurably affect performance.
k = (iMap[t] or MBpairs(t, true) and iMap[t])[not k and 1 or vMap[t][k]]
return k, t[k]
end
function pOther(t, k)
-- comparison to nil because false is a valid key
k = (oMap[t] or MBpairs(t, true) and oMap[t])[nil==k and 1 or vMap[t][k]]
return k, t[k]
end
function pFast(t, k)
-- mapless iterator; almost as fast as native ipairs; slight performance penalty when length not cached
k = not k and 1 or k < (vMap[t] or #t) and k + 1 or nil
return k, t[k]
end
local mk = {__mode = 'k'} -- use mode 'k'; found that mode 'kv' sometimes garbage collects maps mid-loop (may not error because iterators auto re-map, but that's expensive)
init = noOp
iMap = setmetatable({}, mk) -- numeric keys
vMap = setmetatable({}, mk) -- next key
oMap = setmetatable({}, mk) -- non-numeric keys
end
function MBpairs(t, ...) -- pairs always iterates in order
local iter, ex = ...
init()
iter = iter == nil
if iter and not oMap[t] and ex==nil and rawget(t, 1)~=nil and next(t, #t)==nil then--while possible to miss keys, more thorough check would negate the benefit of pFast
vMap[t] = #t return pFast, t, nil
elseif ... or not vMap[t] or select('#', ...) ~= 1 then
local ti, tn, to, n = {}, {}, {}, #t --reduces table lookups
iMap[t], vMap[t], oMap[t] = ti, tn, to
for k = 1, n do
--stage one avoids number type checking op in stage two for most numeric keys
ti[k], tn[k] = k, k + 1
end
for k in (ex or Next)(t) do
if not tn[k] then
table.insert(tonumber(k) ~= k and to or ti, k)
end
end
if #ti ~= n then
table.sort(ti)
for k = 1, #ti do
-- somewhat wasteful, but trying to avoid overwriting can be even more expensive
tn[ti[k]] = k + 1
end
end
for k = 1, #to do
tn[to[k]] = k + 1
end
end
return iter and pIter or oMap[t] and pOther or noOp, t --noOp for mapless
end
end
local parent, rawkey, spec
do
--new scope for variables not reused outside (reduces number of var names that need to checked outside of scope)
--shared meta for Buffer parent property, raw mode, and specialized functions
local mkv = {
__mode = 'kv',
__call = function(t,k,v)
t[k] = v
return k
end
}
--shared meta less memory
parent = setmetatable({}, mkv)
rawkey = setmetatable({}, mkv)
spec = setmetatable({}, mkv)
end
local MB, MBi, MBmix, buffHTML, gfuncs, noCache, Element
do
--minimize number of locals per scope to reduce time spent sifting through irrelevant variable names
local _stream
do
local stream --keep stream near top of scope
local function init(f) --init = noOp after first run
local function each(self, ...)
for k = 1, select('#', ...) do
k = Valid(select(k, ...)) -- slightly faster than table.insert(self, (Valid(select(k, ...))))
if k then
table.insert(self, k)
end
end
return self
end
init = noOp
stream = {
__call = function(t, v)
v = v and Valid(v)
--last_concat cleared before entering stream mode
return v and table.insert(t, v) or t
end,
__index = function(t, i)
--no table look up minimizes resources to retrieve the only stream function
return i == 'each' and each or MB.__index(t, i) and setmetatable(t, MB)[i]
end,
__tostring = function(t)
return setmetatable(t, MB)()
end
}
for k, v in next, MB do
stream[k] = stream[k] or v
end
setmetatable(stream, getmetatable(MB))
end
function _stream(self, ...)
init()
self.last_concat = nil
return setmetatable(self, stream):each(...)
end
end
-- helper for :getParent()-like methods (including getBuffer which does not return a parent)
local function isMBfunc(Buffer, s, ...)
--eventually should figure out to make this work for :getHTML which is very similar
return s and
(
select('#', ...) == 0 and
(
--unprefixed function names append as a string
not rawkey[s] and
tostring(s):match('^_.*') and
MB.__index(Buffer, s) and
MB.__index(Buffer, s)(Buffer) or
MBmix(Buffer, s)
) or assert( --getParent is a one-way trip so one-time assert not expensive
MB.__index(Buffer, s),
('" %s " does not match any available Module:Buffer function'):format(s)
)(Buffer, ...)
) or Buffer
end
-- helper for :_out and :_str
local function MBselect(n, ...)
local n, seps = n - 1, {select(2, ...)}
if type(seps[n])=='table' then
if buffHTML and rawget(seps[n], buffHTML) then
return ...
end
setmetatable(seps, {
__index = setmetatable(seps[n], {
__index = function(t)
return rawget(t, 1)
end
})
})[n] = nil
end
return ..., seps
end
local _inHTML
do
local lastBuffer, lastHTML
local function init(...) -- init replaced and new version called on return
local create, mwFunc = mw.html.create
do
local mwHTMLmeta = getmetatable(create())
buffHTML, mwFunc, _inHTML = setmetatable(mw.clone(mwHTMLmeta), getmetatable(MB)), mwHTMLmeta.__index -- buffHTML declared near top of module; remove _inHTML from outer scope
function init(nodes, ...)
local name, args, tag = select(... and type(...) == 'table' and 1 or 2, nil, ...)
tag = create(Valid(name), args)
if nodes then
table.insert(nodes, tag.parent and tag or rawset(tag, 'parent', parent[nodes]))
end
if args then
local a, b = args.selfClosing, args.parent
args.selfClosing, args.parent = nil
if next(args) then
Element._add(parent(tag.nodes, tag), args)
end
args.selfClosing, args.parent = a, b -- in case args is reused
end
return tag
end
for k, v in next, {[mw] = mwHTMLmeta,
__call = function(h, v)
return MBmix(spec[h.nodes] and h.nodes or spec(setmetatable(parent(h.nodes, h), MB), Element), v)
end,
__concat = false, -- false means take from MB
__eq = false
} do
buffHTML[k] = v or MB[k]
end
end
local nonSelf, BHi = {tag = true,done = true,allDone = true}, buffHTML.__index
do
local g
g = {__index = function(t, i)
if gfuncs and gfuncs[i] then
g.__index, gfuncs = gfuncs
return g.__index[i]
end
end}
setmetatable(nonSelf, g)
setmetatable(BHi, g)
end
for k in next, nonSelf do
-- any HTML objects returned by these funcs will be granted Module:Buffer enhancements
local func = mwFunc[k]
BHi[k] = function(t, ...)
local HTML = func(t, ...)
return parent[HTML] and HTML or setmetatable(parent(HTML, t), buffHTML)
end
end
do
local function joinNode(HTML, sep)
local nodes, join = HTML.nodes
if noCache and rawkey[sep] or Valid(sep) then
join, HTML.nodes = tostring(rawset(HTML, 'nodes', {MB.__call(nodes, sep)})), nodes
end
return join or tostring(HTML)
end
for k, v in next, {
getParent = function(HTML, ...)
lastHTML = HTML
return MBi.getParent(HTML:allDone(), ...)
end, -- return to Buffer that created the HTML tree
getBuffer = function(HTML, ...)
lastHTML = HTML
return isMBfunc(lastBuffer, ...)
end, -- return to last used
killParent = function(HTML, ...)
MBi.killParent(HTML:allDone(), ...)
return HTML
end,
_out = function(HTML, ...)
if ... == 0 then
MBi._out(HTML.nodes, ...)
return HTML
end
lastHTML, HTML = HTML, HTML:allDone()
local n, ops, seps = select('#', ...)
if n > 1 then
local ops, seps = MBselect(n, ...)
return parent[HTML]:_in(joinNode(HTML, rawget(seps, 0))):_out(ops, rawset(seps, buffHTML, true))
end
return parent[HTML]:_(joinNode(HTML, ...))
end,
_str = function(HTML, ...)
-- does not set lastHTML
if ... == 0 then
return joinNode(HTML, select(2, ...))
end -- passing 0 strings without calling allDone()
local HTML, n = HTML:allDone(), select('#', ...)
if n > 1 then
local ops, seps = MBselect(n, ...)
return parent[HTML]:_in(joinNode(HTML, rawget(seps, 1))):_str(ops, rawset(seps, buffHTML, true))
end
return joinNode(HTML, ...)
end,
_parent = function(HTML, ...)
table.insert(HTML.nodes, parent[HTML:allDone()]:_str(...))
return HTML
end
} do
BHi[k] = v
end
end
do
local htmlArg, skip, outFuncs = {parent = true,selfClosing = true,tagName = true}, {}
do
local out local function func(nodes, ...)
return out(parent[nodes], ...)
end
outFuncs = setmetatable({
tag = function(nodes, ...)
return parent(setmetatable(init(nodes, ...), buffHTML), parent[nodes])
end,
done = function(b, ops)
b = parent[b]
while b.parent and ops ~= 0 do
b, ops = b.parent, ops and ops - 1 or 0
end
return b
end
}, {__index = function(nodes, i)
if rawget(BHi, i) then
out = BHi[i]
return func
end -- rawget to exclude globals
end})
end
Element = {
_add = function(nodes, t)
for k, v in MBpairs(t), t, skip[t] do
(v ~= true and MBmix or noOp)(nodes, v)
end
local HTML = parent[nodes] for k, v in MBpairs(t, false) do
if htmlArg[k] then
HTML[k] = v
elseif v and v ~= true then
if nonSelf[k] then
if k == 'tag' then
if type(v) == 'table' then
skip[v], k = 1, rawset(create(Valid(v[1])), 'parent', HTML)
Element._add(spec(parent(k.nodes, k, table.insert(nodes, k)), Element), v)
if k.selfClosing then
k.nodes = nil else spec[k.nodes], parent[k.nodes] = nil
end -- free memory/reduce clutter; parent ref will auto-unset when k.nodes is nil
if not k.tagName then
k.styles, k.attributes = nil
end
else table.insert(nodes, create(v))
end
elseif mwFunc[k] then
if k == 'done' and tonumber(v) ~= v and v[1] and tonumber(v[1]) == v[1] then
skip[v] = 1
end
MBmix(outFuncs[k](nodes, skip[v] and v[1]).nodes, v)
elseif v[1] or v[2] then
k = MBi[k](nodes, unpack(v, 1, rawset(skip, v, k == '_B' and 1 or 2)[v]))
Element._add(getmetatable(k) and rawget(k, 'nodes') or k, v) -- if k is not a table, then v should not contain any extra keys or this may error.
else MBi[k](nodes, v)
end -- k probably == '_G' or '_R'
elseif mwFunc[k] then
if type(v) ~= 'table' or rawget(v, 'nodes') then
mwFunc[k](HTML, v)
else
local css = k == 'css'
for x, y in MBpairs(v, true) do
(y and y ~= true and mwFunc[k] or noOp)(HTML, css and x:gsub('_', '-') or x, y)
end -- iterate non-numbers first
for _, y in MBpairs(v, nil) do
(y and y ~= true and mwFunc[k] or noOp)(HTML, y)
end -- don't bother with gsub since text must be quoted anyhow
end
elseif rawget(Element, k) or rawget(MBi, k) then
if tonumber(v) == v or v[1] == nil or getmetatable(v) then
(Element[k] or MBi[k])(nodes, v) -- v is probably string-able object, or a table to be handled by :_all
else (Element[k] or MBi[k])(nodes, unpack(v, 1, table.maxn(v)))
end -- v is definitely a table
else mwFunc.css(HTML, k:gsub('_', '-', 1), tostring(v))
end -- oddly enough, :_add clocked its fastest runtime after adding auto-gsub as a feature
skip[v] = nil
end
end
return nodes
end
}
local tempMeta = {mode = 'v', copy = {styles = true,attributes = true}}
function tempMeta.__index(t, i)
return tempMeta.copy[i] and rawset(t, i, MBi._cc(false, 0, t.orig[i]))[i] or t.orig[i]
end
rawkey[setmetatable(Element, {__index = outFuncs, __concat = function(Element, v)
return setmetatable({nodes = spec({}, Element),orig = parent[v]}, tempMeta)
end})] = math.huge
end
function MBi:getHTML(...)
lastBuffer = self
if ... then
if select('#', ...) == 1 then
return not rawkey[s] and tostring(...):match'^_' and BHi[...] and BHi[...](lastHTML) or lastHTML(...)
else
return assert(BHi[...], ('" %s " does not match any mw.html or Buffer-mw.html function'):format(tostring(...)))(lastHTML, select(2, ...))
end
end
return lastHTML
end
function MBi:_html(...)
return MBi._(self, lastHTML, select(spec[self] == Element and select('#', ...) == 0 and 1 or 2, true, ...))
end
return init(...)
end
function _inHTML(self, ...)
local HTML = init(nil, ...)
if HTML.selfClosing and spec[self] == Element then
self.last_concat = table.insert(self, HTML)
return self
end
lastBuffer, lastHTML = self, setmetatable(parent(HTML, self), buffHTML) -- set after 'args' table processed by :_add
return HTML
end
end
local _var, unbuild do
local prev, rebuild
local function init(...) -- init replaced before return
local function pick(b, v)
return b and table.insert(b, v) or v
end
local function c(a, num)
return rawset(a.a or a, 0, a[0] and a[0] + a.c or num and a[1] or a[1]:byte())[0]
end
local same, build, alt = {__tostring = function(a, b)
return a.a[0] and pick(b, a.a.string and string.char(a.a[0]) or a.a.table and a.a[1][a.a[0]] or a.a[0])
end}, {
__index = {c = 1},
__tostring = function(t)
return t:_build()
end,
table = function(a, b)
local i = next(a[1], a[0]) or a[0] == #a[1] and next(a[1])
return pick(b, rawset(a.a or a, 0, i)[1][i])
end, -- change rate (a.c) ignored since users control the table's contents
number = function(a, b)
return pick(b, c(a, true))
end,
string = function(a, b)
return pick(b, string.char(c(a)))
end
}, {__index = function(a, i)
return a.a[i]
end, __tostring = function(a, b)
return (rawget(a, 0) and a[0] == tostring(a[0]) and rawset(a, 0, a[0]:byte()) or a).a._build(a, b) end}
local function shift(t, c)
t[0] = t[0] and t[0] + c or t:_build() and t[0] - t.c + c
if t.table then
t[0] = (t[0] - 1) % #t[1] + 1
end
end
function rebuild(...)
local v, c = ...
if v or select('#', ...) == 0 then
if v and not c then
return prev
end
local meta, c = select(v and 1 or 3, alt, c, same, 0)
return setmetatable({a = prev, _build = meta.__tostring, c = c}, meta)
elseif v == nil then
-- no-op
elseif c then
shift(prev, c) -- v == false
else prev:_build()
end
end
init, noCache = function(v, c)
prev = setmetatable({v, c = c, _build = build[type(v)] or v, [type(v)] = true, alt = {}}, build)
return prev
end, true
return init(...)
end
function unbuild(sep)
for k, v in MBpairs(sep, nil) do
k = getmetatable(v) if k and (k == build or k == alt) then
shift(v.a or v, -v.c)
end
end
end
function _var(self, ...)
local obj if ... and ... ~= true then
obj = init(...)
elseif prev then
if ... ~= false then
obj = rebuild(...)
else rebuild(...)
end
end
return obj and MBi._(self, obj, nil, true) or self
end
end
local lib; MBi = setmetatable({stream = _stream,
_inHTML = _inHTML,
_var = _var,
_ = function(self, v, ...)
local at, raw = select(select('#', ...) == 1 and ... == true and 1 or 2, nil, ...)
if raw then
rawkey[self] = math.huge else v = Valid(v)
end
if v or raw then
if at or rawkey[self] then
raw = #self
end -- if length increases by more than one after table.insert, then set rawkey[self] = math.huge; rawkey[self] may be equal to a previous 'at'
at, self.last_concat = at and (tonumber(at) ~= at and raw + at or at)
table.insert(self, select(at and 1 or 2, at, v))
if at and at < 0 or raw and #self - raw > 1 then
rawkey[self] = math.huge elseif at and #self == raw then rawkey[self] = rawkey[self] and math.max(rawkey[self], at) or at
end
end -- above line looks bizarre because one table.insert op may make length jump from 0 to 8: local wtf = {[2] = 2,[4] = 4,[8] = 8}mw.log(#wtf,table.insert(wtf,1),#wtf)
return self
end,
_nil = function(self, at, ...)
if ... ~= true and ... ~= false then
-- faster than type(...) ~= 'boolean'
if not at or at == '0' then
self[#self] = ... if ... then
rawkey[self] = math.huge
end
else
local n, v = tonumber(at), ...
if n ~= at then
if n then
n = #self + at
elseif at ~= true and select('#', ...) == 0 then
v, n = at, #self
end
end
if n then
if v == nil and n > 0 then
table.remove(self, n)
else self[math.floor(n)], rawkey[self] = v, math.huge
end -- floor position for consistency with Table library
end
end
self.last_concat = nil
end
return self
end,
_all = function(self, t, valKey)
for k, v in MBpairs(t) do
MBmix(self, v, valKey)
end
for k, v in valKey and MBpairs(t, false) or noOp, t do
if tonumber(v) then
MBi._(self, k, v) -- self not always a buffer
elseif rawget(MBi, k) and v and v ~= true then
if v[1] == nil or getmetatable(v) then
MBi[k](self, v)
else MBi[k](self, unpack(v, 1, table.maxn(v)))
end
end
end
return self
end,
_str = function(t, ...)
local n = select('#', ...)
if n > 1 then
local k, ops, seps, r = 2, MBselect(n, ...)
r = MB(t(seps[1]))
while parent[t] and ops > 1 and r:_(parent[t](seps[k]), 1) do
t, k, ops = parent[t], k + 1, ops - 1
end
return table.concat(r, seps[k] or nil)
end
return MB.__call(t, ...)
end,
_in = function (self, ...)
return parent(MB(...), self)
end,
_out = function(t, ...)
if ... == 0 then
return parent(t, parent[t], MBi._cc(t, t, MB.__call(t, (select(2, ...))), getmetatable(t)))
end -- love how :_cc needed nothing new to implement this *self pat on back*
local n = select('#', ...)
if n > 1 then
local k, ops, seps = 1, MBselect(n, ...)
while parent[t] and ops > 0 do
t, k, ops = parent[t]:_(t(seps[k])), k + 1, ops - 1
end
elseif parent[t] then
return parent[t]:_(t(...))
end
return t
end,
_cc = function(self, clear, copy, meta)
if clear then
if rawequal(clear, copy) then
return self, spec[MBi._cc] and setmetatable(spec[MBi._cc], MB) -- rawequal to avoid re-string via __eq in case both are different Buffer objects
elseif copy == true then
copy = self
end
if clear ~= 0 then
assert(type(clear) == 'table', debug.traceback('Buffer:_cc can only "clear" tables. Did you forget to call with a colon?', 2)) -- errors can be hard to trace without this
for k in self and next or noOp, clear do
rawset(clear, k, nil)
end
else
return MBi._cc(false, {unpack(copy)}, copy)
end -- copy length w/o empty strings; recursion to avoid self = false causing garbage collection (non-weak child may exist)
if self == false or copy and type(copy) == 'table' then
-- self == false means copy is a table (saves a type op for recursive calls)
meta = meta or getmetatable(copy)
if self and #copy > 1 then
-- preserves length with empty strings; developed from studying http://www.lua.org/source/5.1/ltable.c.html
local n, null, i, e = #copy, {}, math.ldexp(2, select(2, math.frexp(#copy)) - 2)
e, spec[MBi._cc], parent[null] = i - 1, null, clear
for k = 1, e do
table.insert(clear, false)
end
while i <= n do
table.insert(clear, i, '') i, null[i] = i + math.ldexp(2, select(2, math.frexp(n - i)) - 2), ''
end
for k = 1, e do
rawset(clear, k, nil)
end
end
for k, v in next, copy do
rawset(clear, k, type(v) == 'table' and MBi._cc(false, 0, v) or v)
end
elseif copy then
rawset(clear, 1, (Valid(copy)))
end
rawkey[setmetatable(clear, meta)], parent[clear] = rawkey[copy], parent[copy]
end
return self and rawset(self, 'last_concat', nil) or clear
end,
_parent = function(self, ...)
return parent[self] and MBi._(self, parent[self]:_str(...)) or self
end,
getParent = function(self, ...)
return isMBfunc(parent[self] or parent[parent(self, setmetatable({}, MB))], ...)
end,
killParent = function(self, ...)
return parent[self] and isMBfunc(parent[self], ...) and parent(self) or self
end,
_build = function(self, t)
table.insert(t, self())
end, -- for compatibility with mw.html:node()
last_concat = false -- prevent library check
}, {__index = function(t, i)
-- import string, mw.text, and mw.ustring libraries on an as-needed basis
local func = string[i] or mw.text[i] or mw.ustring[i] or type(i) == 'string' and mw.ustring[i:match'^u(.+)'] if func then
lib = lib or function (s, f, ...)
if parent[s] and next(s) == nil then
return s:_((f(tostring(parent[Element and (spec[s] == Element and s:allDone() or spec[parent[s]] == Element and parent[s]) or s]), ...)))
end
return f(tostring(s), ...) -- not using ternary/logical operators here to allow multiple return values
end
return rawset(t, i, i:match'^u?gsub' and function(self, p, r, ...)return lib(self, func, p, r or '', ...)end -- Why are ugsub/gsub special? because empty strings are against my religion!
or function(self, ...)return lib(self, func, ...)end)[i]
end
end})
end
function MBmix(t, v, ...)
return v and ((type(v) ~= 'table' or getmetatable(v)) and MBi._(t, v) or (select('#', ...) == 0 and spec[t] and spec[t]._add or MBi._all)(t, v, ...)) or t
end -- :_all always passes two args
local _G, new_G = _G -- localize _G for console testing (console _G ~= module _G)
return setmetatable({__index = function(t, i)
return spec[t] and spec[t][i] or MBi[i]
end,
__call = function(t, ...)
local rawsep, sep, i, j, raw = noCache and rawkey[...] and ..., ...
if i or j or rawsep or Valid(sep) then
raw, sep, i, j = rawkey[spec[t]] or rawkey[t], rawsep or Valid(sep), i and (i ~= tonumber(i) and i + #t or i), j and (j ~= tonumber(j) and j + #t or j)
if rawsep or raw and (raw >= (j or #t) or i < 1) then
raw, i, j = {}, i and math.floor(i), j and math.floor(j) -- floor for consistency with table.concat(t, sep, i, j), which ignores decimals
raw.lc, t.last_concat = t.last_concat -- temporarily unset last_concat to prevent disqualification from mapless iteration
for k, v in MBpairs(t) do
if raw[1] or not i or k >= i then
if j and k > j then break
end
if raw.s then
raw.s = table.insert(raw, tostring(sep))
end -- if sep contains v and v is a Buffer-variable, sep must be strung before v
k = Valid(v) if k then
raw.s = rawsep or sep and raw[1] and table.insert(raw, sep)
table.insert(raw, k)
end
end
end
if rawsep and not raw.s then
raw[#raw] = unbuild(sep)
end -- unbuild rawsep if final index in t was invalid
t.last_concat = raw.lc
return table.concat(raw)
end
return table.concat(t, sep, i and math.max(i, 1), j and math.min(j, #t))
end
return MB.__tostring(t)
end,
__tostring = function(t)
if t.last_concat then
return t.last_concat
end
local r = rawkey[spec[t]] or rawkey[t]
r = table.concat(r and r >= #t and MBi._all({}, t) or t)
return (noCache or rawset(t, 'last_concat', r)) and r
end,
__concat = function(a, b)
if buffHTML then
for k = 1, 2 do
local v = select(k, a, b) -- faster than for k, v in pairs{a, b} do
if v and spec[v] and spec[v] == Element then
if parent[v].selfClosing then
if rawequal(a, b) then
return (not noCache or parent[v].tagName) and v:_str(0):rep(2) or v:_str(0)..v:_str(0)
end -- rawequal avoids premature tostring of Buffer:_var objects;
b, a = select(k, b, parent[v], a)
else local temp = Element .. v --helper method; returns a mirror of parent[v]
MBmix(MBmix(parent(temp.nodes, temp), a), k == 1 and spec[b] == Element and parent[b] or b)
return buffHTML.__tostring(setmetatable(temp, {__index = parent[v], __mode = 'v'})) -- switch from tempMeta to avoid MBi._cc op of styles/attributes
end
end
end
end
return table.concat(MBmix(MBmix({}, a), b))
end,
__pairs = MBpairs,
__ipairs = MBpairs,
__eq = function(a, b)
return tostring(a) == tostring(b)
end -- avoid a == b in this module; use rawequal(a,b) when they may be different Buffers (premature tostring waste ops and is bad for Buffer:_var)
}, {__tostring = function()return''end,
__call = function(self, ...)
MB = MB or self
if new_G then
if ... and _G and ... == _G then new_G = ...
end
elseif ... and (... == _G or type(...) == 'table' and (...)._G == ...) then
local Nil, mG = {}, (...):getmetatable() or (...):setmetatable{}:getmetatable()
new_G, _G, gfuncs = ..., ..., { -- gfuncs stored for Buffer:_inHTML; new_G is a is a Module:Buffer local declared just before the final return statement.
_G = function(self, i, ...)
local X, save = rawget(new_G, i), select('#', ...) == 0 and self or ...
if i and i ~= true and not (X and save and rawequal(X, save)) and rawset(new_G, i, save) and (X ~= nil or save == nil and new_G[i] ~= nil) then
-- rawequal in case X is another buffer
local mG = getmetatable(new_G) or {__call = mG.__call}
if mG.__index then
pcall(rawset, mG.__index, i, X)
else mG.__index = setmetatable(new_G, mG) and {[i] = X}
end
end
return self, ... -- avoiding __eq with rawequal(self,save) is overkill since buffers can self-save without being passed as save
end,
_R = function(self, i, v, m)
if i ~= 'new_G' then
if i and i ~= true then rawset(new_G, i , v)
end
elseif not v or v == true or v._G ~= _G then
new_G = setmetatable(v ~= true and v or {}, {__call = mG.__call, __index = v ~= true and m ~= true and (m or new_G) or nil})
else new_G, (not m and (m ~= nil or v == new_G) and Nil or getmetatable(v)).__index = v, m ~= true and (m or new_G) or nil
end -- setting Nil.__index is noOp
return self
end,
_2 = function(self, ...)
if new_G[...] ~= nil then
return new_G[...]
end -- higher priority so Buffer:_G('new_G', ...) can prevent an overwrite
if ... == 'new_G' then
return rawset((select('#', ...) ~= 1 and MBi._R(new_G, ...) or new_G), '_G', _G)
end
return select(select('#', ...) == 1 and 1 or 2, self:_G(...)) --return only one value; 'return select(2, self:_G(...)) or self' doesn't work for returning nil
end,
_B = function(self, v)
return v or v == nil and Nil
end
} for k, v in next, gfuncs do
MBi[k] = v
end
setmetatable(Nil,{__concat = MB.__concat,__newindex = noOp,__call = noOp,__tostring = noOp,__metatable = MB,__index = setmetatable({_B = MBi._B,_ = function()return Nil
end,last_concat = ''},
{__index = function(t,i)return (MBi[i] or i and not tonumber(i)) and t._ or nil
end})})
function mG.__call(G, k, ...)
return (k._G or G.type(k) == 'table') and (G.select('#', ...) ~= 1 and G.rawset(k, ...) or G:rawset(..., k) and k) or G:rawset(k, (...)) and ...
end
end
local new = setmetatable({}, self)
if ... and (...) == new_G then
return select(2, ...) and MBmix(new:_G((select(2, ...))), select(3, ...)) or new
end
return ... and MBi._(new, ...) or new
end,
__index = function(t, i)
MB = MB or t
return MBi[i] and function(...)
return MBi[i](setmetatable({}, t), select(... == t and 2 or 1,...))
end
end
})