Lung counter
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
A lung counter is a system consisting of a radiation detector, or detectors, and associated electronics that is used to measure radiation emitted from radioactive material that has been inhaled by a person and is sufficiently insoluble as to remain in the lung for weeks, months, or years.[1] They are frequently used in occupations where workers may be exposed to radiation.[2]
The lung counter may be placed on or near the body.[1] These systems are also often housed in a low background counting chamber. Such a chamber may have thick walls made of low-background steel (~20–25 cm thick) and lined with lead, cadmium, tin, or polypropylene, with a final layer of copper.[3] The purpose of the lead, cadmium (or tin), and copper is to reduce the background in the low energy region of a gamma spectrum (typically less than 200 keV).[citation needed]
Calibration
[edit]As a lung counter is primarily measuring radioactive materials that emit low energy gamma rays or x-rays, the phantom used to calibrate the system must be anthropometric.[citation needed] An example of such a phantom is the Lawrence Livermore National Laboratory Torso Phantom.[1]
See also
[edit]References
[edit]- ^ a b c Eckerman, Keith F.; Xu, Xie George, eds. (September 2009). Handbook of Anatomical Models for Radiation Dosimetry. CRS Press. ISBN 9781420059809. Retrieved 26 March 2023.
- ^ Gollnick, Daniel A. (1994). Basic Radiation Protection Technology. Pacific Radiation Corporation. ISBN 9780916339074. Retrieved 26 March 2023.
- ^ Pelled, O.; German, U.; Pollak, G.; Tshuva, A. "MDA improvement technique for Lung Counter measurements of Uranium Workers" (PDF). Nuclear Research Centre Negev. Retrieved 26 March 2023.