Jump to content

ISO/IEC 80000

From Wikipedia, the free encyclopedia
(Redirected from Kibihertz)

ISO/IEC 80000, Quantities and units, is an international standard describing the International System of Quantities (ISQ). It was developed and promulgated jointly by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It serves as a style guide for using physical quantities and units of measurement, formulas involving them, and their corresponding units, in scientific and educational documents for worldwide use. The ISO/IEC 80000 family of standards was completed with the publication of the first edition of Part 1 in November 2009.[1][2]

Overview

[edit]

By 2021, ISO/IEC 80000 comprised 13 parts, two of which (parts 6 and 13) were developed by IEC and the remaining 11 were developed by ISO, with a further three parts (15, 16 and, 17) under development. Part 14 was withdrawn.

Part Year Name Replaces Status
ISO 80000-1[3] 2022 General ISO 31-0, IEC 60027-1, and IEC 60027-3 published
ISO 80000-2[4] 2019 Mathematics ISO 31-11 and IEC 60027-1 published
ISO 80000-3[5] 2019 Space and time ISO 31-1 and ISO 31-2 published
ISO 80000-4[6] 2019 Mechanics ISO 31-3 published
ISO 80000-5[7] 2019 Thermo­dynamics ISO 31-4 published
IEC 80000-6[8] 2022 Electro­magnetism ISO 31-5 published
ISO 80000-7[9] 2019 Light and radiation ISO 31-6 published
ISO 80000-8[10] 2020 Acoustics ISO 31-7 published
ISO 80000-9[11] 2019 Physical chemistry and molecular physics ISO 31-8 published
ISO 80000-10[12] 2019 Atomic and nuclear physics ISO 31-9 and ISO 31-10 published
ISO 80000-11[13] 2019 Characteristic numbers ISO 31-12 published
ISO 80000-12[14] 2019 Condensed matter physics ISO 31-13 published
IEC 80000-13[15] 2008 Information science and technology sub­clauses 3.8 and 3.9 of IEC 60027-2:2005 published
IEC 80000-14[16] 2008 Telebiometrics related to human physiology IEC 60027-7 withdrawn
IEC 80000-15[17] Logarithmic and related quantities under develop­ment
IEC 80000-16[18] Printing and writing rules under develop­ment
IEC 80000-17[19] Time dependency under develop­ment

Subject areas

[edit]

By 2021 the 80000 standard had 13 published parts. A description of each part is available online, with the complete parts for sale.[20][21]

Part 1: General

[edit]

ISO 80000-1:2022 revised ISO 80000-1:2009, which replaced ISO 31-0:1992 and ISO 1000:1992.[22] This document gives general information and definitions concerning quantities, systems of quantities, units, quantity and unit symbols, and coherent unit systems, especially the International System of Quantities (ISQ).[3] The descriptive text of this part is available online.[23][24]

Part 2: Mathematics

[edit]

ISO 80000-2:2019 revised ISO 80000-2:2009,[4] which superseded ISO 31-11.[25] It specifies mathematical symbols, explains their meanings, and gives verbal equivalents and applications. The descriptive text of this part is available online.[26]

Part 3: Space and time

[edit]

ISO 80000-3:2019 revised ISO 80000-3:2006,[5] which supersedes ISO 31-1 and ISO 31-2.[27] It gives names, symbols, definitions and units for quantities of space and time. The descriptive text of this part is available online.[28]

A definition of the decibel, included in the original 2006 publication, was omitted in the 2019 revision, leaving ISO/IEC 80000 without a definition of this unit; a new part of the standard, IEC 80000-15 (Logarithmic and related quantities), is under development.

Part 4: Mechanics

[edit]

ISO 80000-4:2019 revised ISO 80000-4:2006,[6] which superseded ISO 31-3.[29] It gives names, symbols, definitions and units for quantities of mechanics. The descriptive text of this part is available online.[30]

Part 5: Thermodynamics

[edit]

ISO 80000-5:2019 revised ISO 80000-5:2007,[7] which superseded ISO 31-4.[31] It gives names, symbols, definitions and units for quantities of thermodynamics. The descriptive text of this part is available online.[32]

Part 6: Electromagnetism

[edit]

IEC 80000-6:2022 revised IEC 80000-6:2008,[8] which superseded ISO 31-5[33] as well as IEC 60027-1. It gives names, symbols, and definitions for quantities and units of electromagnetism. The descriptive text of this part is available online.[34]

Part 7: Light and radiation

[edit]

ISO 80000-7:2019 revised ISO 80000-7:2008,[9] which superseded ISO 31-6.[35] It gives names, symbols, definitions and units for quantities used for light and optical radiation in the wavelength range of approximately 1 nm to 1 mm. The descriptive text of this part is available online.[36]

Part 8: Acoustics

[edit]

ISO 80000-8:2020 revised ISO 80000-8:2007,[37] which revised ISO 31-7:1992.[38] It gives names, symbols, definitions, and units for quantities of acoustics. The descriptive text of this part is available online.[39]

It has a foreword, scope introduction, scope, normative references (of which there are none), as well as terms, and definitions. It includes definitions of sound pressure, sound power, and sound exposure, and their corresponding levels: sound pressure level, sound power level, and sound exposure level. It includes definitions of the following quantities:

Part 13: Information science and technology

[edit]

IEC 80000-13:2008 was reviewed and confirmed in 2022 and published in 2008, and replaced subclauses 3.8 and 3.9 of IEC 60027-2:2005 and IEC 60027-3.[15] It defines quantities and units used in information science and information technology, and specifies names and symbols for these quantities and units. It has a scope; normative references; names, definitions, and symbols; and prefixes for binary multiples.

Quantities defined in this standard are:

  • traffic intensity [A]: number of simultaneously busy resources in a particular pool of resources
  • traffic offered intensity [A0]: traffic intensity ... of the traffic that would have been generated by the users of a pool of resources if their use had not been limited by the size of the pool
  • traffic carried intensity [Y]: traffic intensity ... of the traffic served by a particular pool of resources
  • mean queue length [L, (Ω)]: time average of queue length
  • loss probability [B]: probability for losing a call attempt
  • waiting probability [W]: probability for waiting for a resource
  • call intensity, calling rate [λ]: number of call attempts over a specified time interval divided by the duration of this interval
  • completed call intensity [μ]: call intensity ... for the call attempts that result in the transmission of an answer signal
  • storage capacity, storage size [M]
  • equivalent binary storage capacity [Me]
  • transfer rate [r, (ν)]
  • period of data elements [T]
  • binary digit rate, bit rate [rb, rbit (νb, νbit)]
  • period of binary digits, bit period [Tb, Tbit]
  • equivalent binary digit rate, equivalent bit rate [re, (νe)]
  • modulation rate, line digit rate [rm, u]
  • quantizing distortion power [TQ]
  • carrier power [Pc, C]
  • signal energy per binary digit [Eb, Ebit]
  • error probability [P]
  • Hamming distance [dn]
  • clock frequency, clock rate [fcl]
  • decision content [Da]
  • information content [I(x)]
  • entropy [H]
  • maximum entropy [H0, (Hmax)]
  • relative entropy [Hr]
  • redundancy [R]
  • relative redundancy [r]
  • joint information content [I(x, y)]
  • conditional information content [I(x|y)]
  • conditional entropy, mean conditional information content, average conditional information content [H(X|Y)]
  • equivocation [H(X|Y)]
  • irrelevance [C]
  • transinformation content [T(x, y)]
  • mean transinformation content [T]
  • character mean entropy [H′]
  • average information rate [H*]
  • character mean transinformation content [T′]
  • average transinformation rate [T*]
  • channel capacity per character; channel capacity [C′]
  • channel time capacity; channel capacity [C*]

The standard also includes definitions for units relating to information technology, such as the erlang (E), bit (bit), octet (o), byte (B), baud (Bd), shannon (Sh), hartley (Hart), and the natural unit of information (nat).

Clause 4 of the standard defines standard binary prefixes used to denote powers of 1024 as 10241 (kibi-), 10242 (mebi-), 10243 (gibi-), 10244 (tebi-), 10245 (pebi-), 10246 (exbi-), 10247 (zebi-), and 10248 (yobi-).

International System of Quantities

[edit]
Main article: International System of Quantities

Part 1 of ISO 80000 introduces the International System of Quantities and describes its relationship with the International System of Units (SI). Specifically, its introduction states "The system of quantities, including the relations among the quantities used as the basis of the units of the SI, is named the International System of Quantities, denoted 'ISQ', in all languages." It further clarifies that "ISQ is simply a convenient notation to assign to the essentially infinite and continually evolving and expanding system of quantities and equations on which all of modern science and technology rests. ISQ is a shorthand notation for the 'system of quantities on which the SI is based'."

Units of the ISO and IEC 80000 series

[edit]

The standard includes all SI units but is not limited to only SI units. Units that form part of the standard but not the SI include the units of information storage (bit and byte), units of entropy (shannon, natural unit of information and hartley), and the erlang (a unit of traffic intensity).

The standard includes all SI prefixes as well as the binary prefixes kibi-, mebi-, gibi-, etc., originally introduced by the International Electrotechnical Commission to standardise binary multiples of byte such as mebibyte (MiB), for 10242 bytes, to distinguish them from their decimal counterparts such as megabyte (MB), for precisely 1 million (10002) bytes. In the standard, the application of the binary prefixes is not limited to units of information storage. For example, a frequency 10 octaves above 1 hertz, i.e., 210 Hz (1024 Hz), is 1 kibihertz (1 KiHz).[40] These binary prefixes were standardized first in a 1999 addendum to IEC 60027-2. The harmonized IEC 80000-13:2008 standard cancels and replaces subclauses 3.8 and 3.9 of IEC 60027-2:2005, which had defined the prefixes for binary multiples. The only significant change in IEC 80000-13 is the addition of explicit definitions for some quantities.

See also

[edit]

References

[edit]
  1. ^ Standards Catalogue TC/12 Quantities and Units
  2. ^ Schirn, Alexandra (9 January 2023). "ISO 80000-1:2022- Quantities And Units – ANSI Blog". The ANSI Blog. Retrieved 16 May 2023.
  3. ^ a b "ISO 80000-1:2022". International Organization for Standardization. Retrieved 2 November 2023.
  4. ^ a b "ISO 80000-2:2019". International Organization for Standardization. Retrieved 15 September 2019.
  5. ^ a b "ISO 80000-3:2019". International Organization for Standardization. Retrieved 23 October 2019.
  6. ^ a b "ISO 80000-4:2019". International Organization for Standardization. Retrieved 15 September 2019.
  7. ^ a b "ISO 80000-5:2019". International Organization for Standardization. Retrieved 15 September 2019.
  8. ^ a b "IEC 80000-6:2022". International Organization for Standardization. Retrieved 20 November 2022.
  9. ^ a b "ISO 80000-7:2019". International Organization for Standardization. Retrieved 23 October 2019.
  10. ^ "ISO 80000-8:2020". International Organization for Standardization. Retrieved 20 March 2020.
  11. ^ "ISO 80000-9:2019". International Organization for Standardization. Retrieved 15 September 2019.
  12. ^ "ISO 80000-10:2019". International Organization for Standardization. Retrieved 15 September 2019.
  13. ^ "ISO 80000-11:2019". International Organization for Standardization. Retrieved 11 February 2020.
  14. ^ "ISO 80000-12:2019". International Organization for Standardization. Retrieved 15 September 2019.
  15. ^ a b "IEC 80000-13:2008". International Organization for Standardization. Retrieved 24 April 2020.
  16. ^ "IEC 80000-14:2008". International Organization for Standardization. Retrieved 15 September 2019.
  17. ^ "IEC/CD 80000-15". International Organization for Standardization. Retrieved 24 April 2022.
  18. ^ "IEC/CD 80000-16". International Organization for Standardization. Retrieved 1 May 2021.
  19. ^ "IEC/CD 80000-17". International Organization for Standardization. Retrieved 1 May 2021.
  20. ^ "International standards for quantities and units are under revision". EE Publishers. 31 January 2017.
  21. ^ "Standards by ISO/TC 12 – Quantities and units". International Organization for Standardization. Retrieved 24 April 2020.
  22. ^ "ISO 80000-1:2009 Quantities and units – Part 1: General". International Organization for Standardization. Retrieved 2 November 2023.
  23. ^ "ISO 80000-1:2022(en) Quantities and units – Part 1: General". International Organization for Standardization. Retrieved 2 November 2023.
  24. ^ "ISO 80000-1:2009(en) Quantities and units – Part 1: General". International Organization for Standardization. Retrieved 2 November 2023.
  25. ^ "ISO 80000-2:2009". International Organization for Standardization. Retrieved 15 September 2019.
  26. ^ "ISO 80000-2:2019(en) Quantities and units – Part 2: Mathematics". International Organization for Standardization. Retrieved 23 October 2019.
  27. ^ "ISO 80000-3:2006". International Organization for Standardization. Retrieved 20 July 2013.
  28. ^ "ISO 80000-3:2019(en) Quantities and units – Part 3: Space and time". International Organization for Standardization. Retrieved 23 October 2019.
  29. ^ "ISO 80000-4:2006". International Organization for Standardization. Retrieved 15 September 2019.
  30. ^ "ISO 80000-4:2019 Quantities and units – Part 4: Mechanics". International Organization for Standardization. Retrieved 23 October 2019.
  31. ^ "ISO 80000-5:2007". International Organization for Standardization. Retrieved 15 September 2019.
  32. ^ "ISO 80000-5:2019(en) Quantities and units – Part 5: Thermodynamics". International Organization for Standardization. Retrieved 23 October 2019.
  33. ^ "IEC 80000-6:2008". International Organization for Standardization. Retrieved 20 November 2022.
  34. ^ "ISO 80000-6:2022(en,fr) Quantities and units – Part 6: Electromagnetism". International Organization for Standardization. Retrieved 21 November 2022.
  35. ^ "ISO 80000-7:2008". International Organization for Standardization. Retrieved 15 September 2019.
  36. ^ "ISO 80000-7:2019(en) Quantities and units – Quantities and units — Part 7: Light and radiation". International Organization for Standardization. Retrieved 25 March 2021.
  37. ^ "ISO 80000-8:2007". International Organization for Standardization. Retrieved 23 April 2020.
  38. ^ "ISO 31-7:1992". International Organization for Standardization. Retrieved 23 April 2020.
  39. ^ "ISO 80000-8:2020(en) Quantities and units – Part 8: Acoustics". International Organization for Standardization. Retrieved 23 April 2020.
  40. ^ Ainslie, Michael A.; Halvorsen, Michele B.; Robinson, Stephen P. (January 2022) [2021-11-09]. "A terminology standard for underwater acoustics and the benefits of international standardization". IEEE Journal of Oceanic Engineering. 47 (1). IEEE: 179–200. Bibcode:2022IJOE...47..179A. doi:10.1109/JOE.2021.3085947. eISSN 1558-1691. ISSN 0364-9059. S2CID 243948953. Retrieved 20 December 2022. [1] (22 pages)
[edit]
Retrieved from "https://wiki.riteme.site/w/index.php?title=ISO/IEC_80000&oldid=1257369140#Units_of_the_ISO_and_IEC_80000_series"