Kerr cell shutter
A Kerr cell shutter is a type of photographic shutter used for very fast shutter speeds down to nanosecond level.
The Kerr Cell consists of a transparent container (A) filled with nitrobenzene[1] (B) with attached electrodes (C and D). A high voltage is passed through the electrodes which causes an electric field perpendicular to the transmitted light beam to be applied.
The cell makes use of the Kerr effect, in which the nitrobenzene becomes birefringent under the influence of the electric field. This allows it to be used as a shutter that can be opened for a very brief amount of time, around 10ns.[2]
Its primary disadvantage was the use of toxic and flammable substances such as nitrobenzene and o-nitrotoluene. These have now largely been replaced by KTN (potassium tantalate niobate) and barium titanate (BaTiO3).
Speed of Light measurement
[edit]The Kerr Cell shutter was used in the 1920-40s to measure the speed of light. A beam of light is timed between an emitter and receiver while passing through a Kerr Cell. When the cell is activated the light beam is diverted and takes a different path to the receiver, this time difference is measured and the speed of light is calculated based on knowledge of the expected return time.[3]
See also
[edit]References
[edit]- ^ "High Speed Photography".
- ^ Michael R. Peres (29 May 2013). The Focal Encyclopedia of Photography. Taylor & Francis. pp. 545–. ISBN 978-1-136-10613-2.
- ^ "O-14 Speed of Light - Physics 6510/4410 Wiki". Archived from the original on 2016-12-20. Retrieved 2016-12-08.
External links
[edit]- Kerr Cell - The birth of optoelectronics (University of Glasgow) at the Wayback Machine (archived October 8, 1999)
 | This photography-related article is a stub. You can help Wikipedia by expanding it. |
 | This optics-related article is a stub. You can help Wikipedia by expanding it. |