Isotta Fraschini Asso 750
| Asso 750 | |
|---|---|
| |
| Preserved Asso 750 | |
| Type | W 18 piston engine |
| National origin | Italy |
| Manufacturer | Isotta Fraschini |
| First run | 1934 |
The Isotta Fraschini Asso 750 was an Italian W 18 water-cooled aircraft engine of the 1930s. Produced by Isotta Fraschini the engine displaced just under 48 L (2,900 cu in) and produced up to 940 hp (700 kW). Together with the Asso 200 and the Asso 500 the Asso 750 was part of a family of modular engines, that used common and interchangeable components to lower production costs.
Technical description
[edit]The W-18 Asso 750 had three six-cylinder in-line banks made of chrome-manganese steel, each joined by a single cast aluminum head for each bank of cylinders.
Operational history
[edit]A version with an effective power of 940 hp (700 kW) was optimized for the Savoia-Marchetti S.55X used for the trans-Atlantic flight of Italo Balbo.
Variants
[edit]- Asso 750
- Direct-drive, unsupercharged.
- Asso 750 R.
- Development with modified crankcase and crankshaft, fitted with a 0.658:1 reduction gear. Maximum power output 940 hp (700 kW).
- Asso 750 R.C.
- Asso 750 R.C.35
- The 750 R. fitted with a supercharger, rated altitude of 3,500 m (11,500 ft).
- Asso 750 M
- A 57.25 L (3,494 cu in) racing development with 150 mm (5.9 in) bore and 180 mm (7.1 in) stroke, for the Macchi M.67, re-designated Asso 1000 Ri.
Applications
[edit]- CANT Z.501 (early versions)
- Caproni Ca.111
- Macchi M.C.77
- Savoia-Marchetti S.55
- Savoia-Marchetti S.62
- Savoia-Marchetti S.78
Engines on display
[edit]At the Italian Air Force Museum two Isotta Fraschini Asso 750 are exhibited: A direct-drive Asso 750 and an Asso 750 R.C.35 with reduction gear and supercharger.
Specifications (Asso 750)
[edit]
Data from Il motore Isotta Fraschini Asso 750 [1][2]
General characteristics
- Type: W-18 liquid/water-cooled
- Bore: 140 mm (5.5 in)
- Stroke: 170 mm (6.7 in)
- Displacement: 47.6 L (2,900 cu in)
- Length: 2,196 mm (86.5 in)
- Width: 1,060 mm (42 in)
- Height: 1,060 mm (42 in)
- Dry weight: 630 kg (1,390 lb)
Components
- Valvetrain: Overhead valves 2x inlet and 2x exhaust per cylinder
- Supercharger: No supercharger fitted to this variant: supercharger available in other variants - (R.C.35 rated to 3,500 m (11,500 ft)).
- Fuel type: Gasoline 87 Octane
- Oil system: pressure
- Cooling system: Liquid/water
- Reduction gear: Not fitted to this variant: reduction geared variants available (0.658:1 R. and R.C.35).
Performance
- Power output: Normal 800 hp (600 kW) at 1700 rpm; Take-off 850 hp (630 kW) at 1750 rpm; Max 900 hp (670 kW) at 1900 rpm
- Compression ratio: 5.6:1
- Specific fuel consumption: 0.295 kg/kWh (0.485 lb/(hp⋅h))
- Oil consumption: 0.00114 kg/kWh (0.00187 lb/(hp⋅h))
- Power-to-weight ratio: Normal 0.95 kW/kg (0.58 hp/lb) max 1.129 kW/kg (0.687 hp/lb)
See also
[edit]Related lists
References
[edit]- ^ "Il motore Isotta Fraschini Asso 750" (PDF) (in Italian): 655–657. Archived from the original on November 6, 2018. Retrieved 6 November 2018.
{{cite journal}}: Cite journal requires|journal=(help)CS1 maint: unfit URL (link) - ^ "Aero Engine Data Sheets:Mechanical Data tables:Italian Aero Engines". oldengine.org. Archived from the original on 8 August 2007. Retrieved 7 November 2018.
Further reading
[edit]
- Cei, Leoniero; Fiore, Amedeo (1934). Il motorista d'aviazione (in Italian). Milan: Ulrico Hoepli.
- "Jotti da Badia Polesine". Annuario dell'Aeronautica Italiana. Milan.: Libreria Aeronautica: 222. 1934.
- "Foreign Aero Engines at Olympia". Flight. XXI No. 30 (1074): 761–778. 25 July 1929. Retrieved 8 November 2018.
- Vicenzi, Ugo (October 2021). "Aces High: Isotta Franchini's "Asso" Powerplant Series". The Aviation Historian (37): 42–51. ISSN 2051-1930.