Jump to content

Fiat Tipo Due platform

From Wikipedia, the free encyclopedia
Tipo Due platform
Overview
ManufacturerFiat Group
Also calledTipo 2
type two
Production1988–2003
Body and chassis
ClassCompact car platform
LayoutFront-engine, front-wheel drive
VehiclesAlfa Romeo 145
Alfa Romeo 146
Alfa Romeo Spider
Alfa Romeo GTV
Fiat Tipo
Fiat Coupé
Lancia Delta
Dimensions
Wheelbase2,540 mm (100.0 in)
Chronology
SuccessorFiat C-platform

The Tipo Due platform (type two) was a front wheel drive platform designed by the Italian Fiat Group and used during the late 1980s, 1990s and early 2000s for a range of Alfa Romeo, Fiat and Lancia models. It introduced the concept of a "modular" platform, albeit not as modular as current platforms are, allowing the group to assemble various models, also with some special modifications, from the same floorpan. It uses four-wheel independent suspension, composed of MacPherson struts at the front and trailing arms at the rear, with Alfa Romeo Spider and GTV using a multilink setup rather than trailing arms.

The first generation Fiat C-platform was directly derived from this platform: it has only minor differences, and is also called "Type Two rev. 2".[1] The Alfa Romeo 156 and Lancia Lybra platform is also derived from the Type Two rev. 2 platform and called "Type Two rev. 3", with stretched wheelbase and different suspension setups: MacPherson struts at the front and GLA (standing for "Guided Longitudinal Arms", "Bracci Longitudinali Guidati" in Italian) at the rear for the Lybra, double wishbones at the front and MacPherson struts at the rear for the Alfa.

The Type Three platform was merely a stretched version of the Type Two platform, intended for Fiat Group's saloons such as the Fiat Tempra, with an all-wheel drive system available.

Models

[edit]

References

[edit]
  1. ^ Ciferri, Luca (2005-12-13). "Fiat to use five different platform types". Automotive News Europe. Archived from the original on 2022-04-29.