Jump to content

Sodium sulfide

From Wikipedia, the free encyclopedia
(Redirected from Disodium sulphide)
Sodium sulfide
Names
Other names
Disodium sulfide
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.013.829 Edit this at Wikidata
EC Number
  • 215-211-5
RTECS number
  • WE1905000
UNII
UN number 1385 (anhydrous)
1849 (hydrate)
  • InChI=1S/2Na.S/q2*+1;-2 ☒N
    Key: GRVFOGOEDUUMBP-UHFFFAOYSA-N ☒N
  • InChI=1/2Na.S/q2*+1;-2
    Key: GRVFOGOEDUUMBP-UHFFFAOYAP
  • [Na+].[Na+].[S-2]
Properties
Na2S
Molar mass 78.0452 g/mol (anhydrous)
240.18 g/mol (nonahydrate)
Appearance colorless, hygroscopic solid
Odor none
Density 1.856 g/cm3 (anhydrous)
1.58 g/cm3 (pentahydrate)
1.43 g/cm3 (nonohydrate)
Melting point 1,176 °C (2,149 °F; 1,449 K) (anhydrous)
100 °C (pentahydrate)
50 °C (nonahydrate)
12.4 g/100 mL (0 °C)
18.6 g/100 mL (20 °C)
39 g/100 mL (50 °C)
(hydrolyses)
Solubility insoluble in ether
slightly soluble in alcohol[1]
−39.0·10−6 cm3/mol
Structure
Antifluorite (cubic), cF12
Fm3m, No. 225
Tetrahedral (Na+); cubic (S2−)
Hazards
GHS labelling:
GHS05: Corrosive GHS06: Toxic GHS07: Exclamation mark GHS09: Environmental hazard
Danger
H302, H311, H314, H400
P260, P264, P270, P273, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P322, P330, P361, P363, P391, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
3
1
1
> 480 °C (896 °F; 753 K)
Safety data sheet (SDS) ICSC 1047
Related compounds
Other anions
Sodium oxide
Sodium selenide
Sodium telluride
Sodium polonide
Other cations
Lithium sulfide
Potassium sulfide
Rubidium sulfide
Caesium sulfide
Related compounds
Sodium hydrosulfide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Sodium sulfide is a chemical compound with the formula Na2S, or more commonly its hydrate Na2S·9H2O. Both the anhydrous and the hydrated salts in pure crystalline form are colorless solids, although technical grades of sodium sulfide are generally yellow to brick red owing to the presence of polysulfides and commonly supplied as a crystalline mass, in flake form, or as a fused solid. They are water-soluble, giving strongly alkaline solutions. When exposed to moisture, Na2S immediately hydrates to give sodium hydrosulfide.

Some commercial samples are specified as Na2xH2O, where a weight percentage of Na2S is specified. Commonly available grades have around 60% Na2S by weight, which means that x is around 3. These grades of sodium sulfide are often marketed as 'sodium sulfide flakes'. These samples consist of NaSH, NaOH, and water.

Structure

[edit]

The structures of sodium sulfides have been determined by X-ray crystallography. The nonahydrate features S2- hydrogen-bonded to 12 water molecules.[2] The pentahydrate consists of S2- centers bound to Na+ and encased by an array of hydrogen bonds.[3] Anhydrous Na2S, which is rarely encountered, adopts the antifluorite structure,[4][5] which means that the Na+ centers occupy sites of the fluoride in the CaF2 framework, and the larger S2− occupy the sites for Ca2+.

Production

[edit]

Industrially Na2S is produced by carbothermic reduction of sodium sulfate often using coal:[6]

Na2SO4 + 2 C → Na2S + 2 CO2

In the laboratory, the salt can be prepared by reduction of sulfur with sodium in anhydrous ammonia, or by sodium in dry THF with a catalytic amount of naphthalene (forming sodium naphthalenide):[7]

2 Na + S → Na2S

Reactions with inorganic reagents

[edit]

The sulfide ion in sulfide salts such as sodium sulfide can incorporate a proton into the salt by protonation:

S2−
+ H+SH

Because of this capture of the proton (H+), sodium sulfide has basic character. Sodium sulfide is strongly basic, able to absorb two protons. Its conjugate acid is sodium hydrosulfide (SH
). An aqueous solution contains a significant portion of sulfide ions that are singly protonated.

S2−
+ H2O SH
+ OH
SH
+ H2O H2S + OH

Sodium sulfide is unstable in the presence of water due to the gradual loss of hydrogen sulfide into the atmosphere.

When heated with oxygen and carbon dioxide, sodium sulfide can oxidize to sodium carbonate and sulfur dioxide:

2 Na2S + 3 O2 + 2 CO2 → 2 Na2CO3 + 2 SO2

Oxidation with hydrogen peroxide gives sodium sulfate:[8]

Na2S + 4 H2O2 → 4 H2O + Na2SO4

Upon treatment with sulfur, sodium polysulfides are formed:

2 Na2S + S8 → 2 Na2S5

Pulp and paper industry

[edit]

In terms of its dominant use, "sodium sulfide" is primarily used in the kraft process in the pulp and paper industry. It aids in the delignification process, affording cellulose, which is the main component of paper.

It is used in water treatment as an oxygen scavenger agent and also as a metals precipitant; in chemical photography for toning black and white photographs; in the textile industry as a bleaching agent, for desulfurising and as a dechlorinating agent; and in the leather trade for the sulfitisation of tanning extracts. It is used in chemical manufacturing as a sulfonation and sulfomethylation agent. It is used in the production of rubber chemicals, sulfur dyes and other chemical compounds. It is used in other applications including ore flotation, oil recovery, making dyes, and detergent. It is also used during leather processing, as an unhairing agent in the liming operation.

Reagent in organic chemistry

[edit]

Installation of carbon-sulfur bonds

[edit]

Alkylation of sodium sulfide give thioethers:

Na2S + 2 RX → R2S + 2 NaX

Even aryl halides participate in this reaction.[9] By a broadly similar process sodium sulfide can react with alkenes in the thiol-ene reaction to give thioethers. Sodium sulfide can be used as nucleophile in Sandmeyer type reactions.[10]

Reducing agent

[edit]

Aqueous solution of sodium sulfide will reduce nitro groups to amine. This conversion is applied to production of some azo dyes since other reducible groups, e.g. azo group, remain intact.[11] The reduction of nitro aromatic compounds to amines using sodium sulfide is known as the Zinin reaction in honor of its discoverer.[12] Hydrated sodium sulfide reduces 1,3-dinitrobenzene derivatives to the 3-nitroanilines.[13]

Other reactions

[edit]

Sulfide has also been employed in photocatalytic applications.[14]

Safety

[edit]

Consisting of the equivalent of sodium hydroxide, sodium sulfide is strongly alkaline and can cause chemical burns. It reacts rapidly with acids to produce hydrogen sulfide, which is highly toxic.

References

[edit]
  1. ^ Kurzin, Alexander V.; Evdokimov, Andrey N.; Golikova, Valerija S.; Pavlova, Olesja S. (June 9, 2010). "Solubility of Sodium Sulfide in Alcohols". J. Chem. Eng. Data. 55 (9): 4080–4081. doi:10.1021/je100276c.
  2. ^ Preisinger, A.; Mereiter, K.; Baumgartner, O.; Heger, G.; Mikenda, W.; Steidl, H. (1982). "Hydrogen Bonds in Na2S·9D2O: Neutron Diffraction, X-Ray Diffraction and Vibrational Spectroscopic Studies". Inorganica Chimica Acta. 57: 237–246. doi:10.1016/S0020-1693(00)86975-3.
  3. ^ Mereiter, Kurt; Preisinger, Anton; Zellner, Andrea; Mikenda, Werner; Steidl, Heinz (1984). "Hydrogen Bonds in Na2S·5H2O: X-ray Diffraction and Vibrational Spectroscopic Study". J. Chem. Soc., Dalton Trans. (7): 1275–1277. doi:10.1039/dt9840001275.
  4. ^ Zintl, E; Harder, A; Dauth, B. (1934). "Gitterstruktur der oxyde, sulfide, selenide und telluride des lithiums, natriums und kaliums". Z. Elektrochem. Angew. Phys. Chem. 40: 588–93.
  5. ^ Wells, A.F. (1984) Structural Inorganic Chemistry, Oxford: Clarendon Press. ISBN 0-19-855370-6.
  6. ^ Holleman, A.F.; Wiberg, E. (2001). Inorganic Chemistry. San Diego: Academic Press. ISBN 0-12-352651-5..
  7. ^ So, J.-H; Boudjouk, P; Hong, Harry H.; Weber, William P. (2007). "Hexamethyldisilathiane". Inorg. Synth. 29: 30–32. doi:10.1002/9780470132609.ch11. ISBN 978-0-470-13260-9.
  8. ^ L. Lange, W. Triebel, "Sulfides, Polysulfides, and Sulfanes" in Ullmann's Encyclopedia of Industrial Chemistry 2000, Wiley-VCH, Weinheim. doi:10.1002/14356007.a25_443
  9. ^ Charles C. Price, Gardner W. Stacy "p-Aminophenyldisulfide" Org. Synth. 1948, vol. 28, 14. doi:10.15227/orgsyn.028.0014
  10. ^ Khazaei; et al. (2012). "synthesis of thiophenols". Synthesis Letters. 23 (13): 1893–1896. doi:10.1055/s-0032-1316557. S2CID 196805424.
  11. ^ Yu; et al. (2006). "Syntheses of functionalized azobenzenes". Tetrahedron. 62 (44): 10303–10310. doi:10.1016/j.tet.2006.08.069.
  12. ^ Zinin, N. (1842). "Beschreibung einiger neuer organischer Basen, dargestellt durch die Einwirkung des Schwefelwasserstoffes auf Verbindungen der Kohlenwasserstoffe mit Untersalpetersäure" [Description of some new organic bases, represented by the action of hydrogen sulphide on hydrocarbons with sub-nitric acid]. Journal für Praktische Chemie (in German). 27 (1): 140–153. doi:10.1002/prac.18420270125.
  13. ^ Hartman, W. W.; Silloway, H. L. (1945). "2-Amino-4-nitrophenol". Organic Syntheses. 25: 5. doi:10.15227/orgsyn.025.0005{{cite journal}}: CS1 maint: multiple names: authors list (link).
  14. ^ Savateev, A.; Dontsova, D.; Kurpil, B.; Antonietti, M. (June 2017). "Highly crystalline poly(heptazine imides) by mechanochemical synthesis for photooxidation of various organic substrates using an intriguing electron acceptor – Elemental sulfur". Journal of Catalysis. 350: 203–211. doi:10.1016/j.jcat.2017.02.029.