Chemcatcher
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
Chemcatcher is a passive sampling device for monitoring a variety of pollutants (including trace metals, polycyclic aromatic hydrocarbons, pesticides and pharmaceutical residues) in water.[1] It is a reusable three component, water-tight PTFE body. Two different designs are available to accommodate different types of commercially available 47 mm diameter receiving phase disks.
Background
[edit]Most monitoring programmes involve the periodic collection of low volume spot samples (bottle or grab) of water, which is challenging, particularly where levels fluctuate over time and when chemicals are only present at trace, yet toxicologically relevant concentrations. Chemcatcher is used to measure time-weighted average (TWA) or equilibrium concentrations of a wide range of pollutants in water. This allows the end user to obtain a more representative picture of the chemicals that may be present in the aquatic environment.
Development
[edit]The Chemcatcher concept was developed[2][3] by Professors Richard Greenwood and Graham Mills at the University of Portsmouth, together with colleagues from Chalmers University of Technology, Sweden. The device is patented[4][5] in a number of countries and the name is a registered trademark in Ireland and the United Kingdom.[6]
T.E. Laboratories (TelLab), based in Tullow, Ireland, holds the global licence to manufacture and sell Chemcatcher.
Use
[edit]The sampler can be deployed in the field for extended periods of time ranging from days to weeks. The specific pollutants of interest are sequestered by the samplers and these are retained on the receiving phase disk. After retrieval from the environment the pollutants are eluted from the disk and analysed in the laboratory using conventional instrumental methods. In order to obtain TWA concentrations the sampler must first be calibrated in the laboratory so as to ascertain the uptake rate (usually measured as the volume of water cleared per unit time i.e. L/h for the analyte) of the pollutant of interest. Chemcatcher has been used in a range of aquatic environments; however, most work to date has been in monitoring the TWA concentrations of priority and emerging pollutants in surface waters.[7][8][9]
The use of passive sampling devices,[10][11] such as Chemcatcher or polar organic chemical integrative sampler (POCIS), has a number of advantages over the use of spot or bottle sampling for monitoring pollutants in the aquatic environment. The latter technique gives only an instantaneous concentration of the pollutant as the specific time of sampling. Passive samplers, depending on their mode of use, can give either the TWA or equilibrium concentration of the pollutant over the deployment period. The measurement of TWA concentrations can give a better indication of the long-term environmental conditions and enables improved risk assessment. Chemcatcher can be used to monitor both polar and non-polar compounds.
References
[edit]- ^ Adeline Charriau; Sophie Lissalde; Gaëlle Poulier; Nicolas Mazzella; Rémy Buzier; Gilles Guibaud (2016). "Overview of the Chemcatcher® for the passive sampling of various pollutants in aquatic environments Part A: Principles, calibration, preparation and analysis of the sampler". Talanta. 148: 556–571. doi:10.1016/j.talanta.2015.06.064. ISSN 0039-9140.
- ^ Kingston J, Greenwood R, Mills GA, Morrison GM, Björklund-Persson L (2000). "Development of a novel passive sampling system for the timed-averaged measurement of a range of organic pollutants in aquatic environments". J Environ Monit. 2 (5): 487–495. doi:10.1039/b003532g. PMID 11254055.
- ^ Björklund L, Morrison GM, Friemann JU, Kingston J, Mills GA, Greenwood R (2001). "Diffusional behaviour of metals in a passive sampling system for monitoring aquatic pollution". J Environ Monit. 3 (6): 639–645. doi:10.1039/b107959j. PMID 11785639.
- ^ Greenwood, R; Kingston J; Mills GA; Morrison G; Björklund-Persson L. "Design and application of passive sampling device for the timed-average measurement of organic compounds in the aquatic environment". UK Patent No 2353860: Granted February 2004.
- ^ Greenwood, R; Kingston J; Mills GA; Morrison G; Björklund-Persson L. "Design and application of passive sampling device for the timed-average measurement of organic compounds in the aquatic environment". US Patent Application No. 10/069351: Granted June 2006.
- ^ Intellectual Property Office. "Case details for Trade Mark 2450451". Retrieved 21 September 2011.
- ^ Allan, IJ; Knutsson J; Guigues N; Mills GA; Fouillac A-M; Greenwood R (2008). "Chemcatcher and DGT passive sampling devices for regulatory monitoring of trace metals in surface water". J Environ Monit. 10 (7): 821–829. doi:10.1039/b802581a. PMID 18688449.
- ^ Vrana, B; Mills GA; Leonards PEG; Kotterman M; Weideborg M; Hajslova J; Kocourek V; Tomaniova M; Pulkrabova J; Suchanova M; Hajkova K; Herve S; Ahkola H; Greenwood R (2010). "Field performance of the Chemcatcher passive sampler for monitoring hydrophobic organic pollutants in surface water". J Environ Monit. 12 (4): 863–872. doi:10.1039/b923073d. PMID 20383367.
- ^ Allan, IJ; Booij K; Paschke A; Vrana B; Mills GA; Greenwood R (2009). "Field performance of seven passive sampling devices for monitoring of hydrophobic substances". Environ Sci Technol. 43 (14): 5383–5390. doi:10.1021/es900608w. PMID 19708370.
- ^ Greenwood, R; Mills, G; Vrana, B, eds. (2007). Passive sampling techniques in environmental monitoring (Comprehensive Analytical Chemistry series, D Barcelo (series ed.). Amsterdam: Elsevier. pp. 453. ISBN 978-0-444-52225-2. Archived from the original on 2012-10-14. Retrieved 2011-09-21.
{{cite book}}: CS1 maint: bot: original URL status unknown (link)Archived 2012-10-14 at the Wayback Machine - ^ Vrana, B; et al. (2005). "Passive sampling techniques for monitoring of pollutants in water (Review Article)". TrAC Trends in Analytical Chemistry. 24 (10): 845–868. doi:10.1016/j.trac.2005.06.006.