CMD RAMLink

The RAMLink is one of several RAM expansion products that was made by Creative Micro Designs (CMD) for Commodore's C64/128 home computers. The RAMLink was intended as a third-party alternative, successor and optionally companion to Commodore's own 17xx-series REU RAM expansion cartridges.

Unlike the REU, the RAMLink is externally powered and designed from the ground-up to act as a RAM disk.

Features

Allows up to 16 MB of expansion RAM. The expansion memory can be provided by a combination of 30-pin SIMM RAM on an internal card, a Commodore 17xx-series REU (or a clone) plugged into the RAM Port, or a GeoRAM.
Provides its own copy of JiffyDOS, allowing accelerated operation with any other Jiffy DOS-equipped disk device, as well as shorthand commands (DOS Wedge) to conveniently access any other connected storage devices.
Full set of partitioning tools and DOS commands.
Commodore 1541, 1571 and 1581 disk-layout emulation modes
One partition type provides Direct-access REU-like capability
Secondary power socket and on-board charging circuit to accept a 6-volt "sealed" lead acid backup battery.
Battery-backed real time clock for time and date stamping of files, if the internal RAM card is present.
Includes drivers to allow GEOS to use its memory as either a replacement for swap space, or as a regular 'disk' drive.
Custom parallel connection for the CMD HD Series line of hard drives.
Pass-through expansion port for standard cartridges (e.g. Action Replay, Super Snapshot)
On-device buttons to swap device numbers with other drives, switches to disable 17xx-series REUs or change their handling.

Creative Micro Designs (1990). CMD RAMLink User's Manual, third edition. (supplied with the hardware)

"CMD - RAMLink". Archived from the original on 8 March 2012. Retrieved 22 March 2012. Technical info, Games & Utilities

This computer hardware article is a stub. You can help Wikipedia by expanding it.

This microcomputer- or microprocessor-related article is a stub. You can help Wikipedia by expanding it.