Block Error Rate
 | This article relies largely or entirely on a single source. (January 2024) |
Block Error Rate (BLER) is a ratio of the number of erroneous blocks to the total number of blocks ansmitted on a digital circuit.
It is used in measuring the error rate when extracting data frames from a Compact Disc (CD). The BLER measurement is often used as a quality control measure with regards to how well audio is retained on a compact disc over time.
BLER is also used for W-CDMA performance requirements tests (demodulation tests in multipath conditions, etc.). BLER is measured after channel de-interleaving and decoding by evaluating the Cyclic Redundancy Check (CRC) on each transport block.
Block Error Rate (BLER) is used in LTE/4G technology to determine the in-sync or out-of-sync indication during radio link monitoring (RLM). Normal BLER is 2% for an in-sync condition and 10% for an out-of-sync condition.[1]8ballPool
References
[edit]- ^ "Block Error Ratio (BLER) Measurement Description". February 28, 2014. Retrieved 23 December 2015.