Airbus Mobile
Airbus U.S. Manufacturing Facility | |
---|---|
Built | April 8, 2013 |
Operated | September 14, 2015 | –Present
Location | 320 Airbus Way Mobile, Alabama United States |
Coordinates | 30°38′04″N 88°04′16″W / 30.63451203°N 88.07118242°W |
Industry | Aerospace |
Products | |
Employees | 2,200[1] |
Address | airbusalabama.com |
Owner(s) | Airbus |
The Airbus U.S. Manufacturing Facility is an assembly site for Airbus's Commercial Airplanes division, located at the Mobile Aeroplex at Brookley in Mobile, Alabama, United States. The plant is an assembly and delivery site for Airbus commercial aircraft in the United States and one of the largest employment centers in the state. The site is one of four final assembly and delivery points for the Airbus A320neo family[a] and one of two final assembly and delivery points for the Airbus A220.[b]
History
[edit]The European Aeronautic Defence and Space Company (EADS), the predecessor to the modern Airbus SE, announced in June 2005 that it selected Mobile, Alabama for an aircraft manufacturing facility. The company felt that a U.S. manufacturing facility would help it better compete for military aircraft contracts. EADS said that it had picked Mobile for its nearby deep-water port off the Gulf of Mexico, an abundance of industrial space available within the Mobile Aeroplex at Brookley, the site of the former Brookley Air Force Base, and access to the uncongested Mobile Downtown Airport. EADS also built an engineering office at the site, which opened in 2006.[2]
In 2008, EADS launched a joint bid with Northrop Grumman to supply aerial refueling tankers to the United States Air Force. As part of the bid, EADS planned to assemble the basic Airbus A330 airframe in Mobile before delivering it to a neighboring facility to be operated by Northrop Grumman, where it would be converted into the KC-45 tanker. EADS also announced plans to have its Airbus subsidiary shift Airbus A330 commercial freighter assembly to Alabama.[3] In total, Northrop Grumman and EADS planned to invest approximately US$600 million in their assembly plants in Alabama. However, EADS and Northrop Grumman lost the contract.
However, Airbus remained interested in opening a U.S. manufacturing facility in Mobile. In June 2012, it was announced that Airbus had decided to open the facility to assemble the Airbus A320 family (A319, A320 and A321) of airliners.[4][5][6] The announced plans included a $600 million factory at the Brookley Aeroplex for the assembly of the aircraft, employing up to 1,000 full-time workers when at full capacity. Construction was scheduled to begin in 2013, with it becoming operable by 2015 and intending to produce 40 to 50 aircraft per year by 2017.[6] The plan was formally announced by Airbus CEO Fabrice Brégier from the Mobile Convention Center on 2 July 2012.[7][8] A groundbreaking ceremony for the factory was held on 8 April 2013.[9] On 14 September 2015, Airbus officially opened the Mobile assembly line.[10]
Aircraft in production
[edit]Airbus A320
[edit]The Mobile plant is a final assembly line for the Airbus A320neo family of narrow-body aircraft and previously the Airbus A320 family. Aircraft assembled in Mobile are destined for airlines based in North America. On 21 June 2015, the main fuselage components for the first aircraft built in Mobile arrived at the plant. The first aircraft, an A321, was delivered to JetBlue on 25 April 2016.[11]
The major components of the aircraft, such as the wings and fuselage, are built in factories across Europe and sent to Saint-Nazaire, France, where four aircraft worth of parts on truck trailers are loaded onto a barge. After a trans-Atlantic crossing, the parts are off-loaded at the Port of Mobile, and trucked final mile to the factory for assembly.[12][13]
As of 2021[update], the site has the capacity to assemble seven A320 family aircraft every month.[14] The company plans to add a second A320 family assembly line to increase production to 20 aircraft every month.[15]
Airbus A220
[edit]The Mobile plant has also been used as a final assembly line for Airbus A220 narrow-body aircraft since August 2019. The first aircraft from the new line, an A220-300, was delivered to Delta in October 2020.[16] Airbus plans to ramp production in Alabama up to four A220 aircraft each month by 2025.[17]
Airbus acquired a majority stake in the Bombardier CSeries programme in October 2017, renaming the aircraft the A220.[18][19] While manufacturing of the A220 was already under construction at facilities in the province of Quebec, formerly owned by Bombardier, the aircraft was potentially facing steep tariffs for Canadian-made planes being purchased by U.S. airlines. Airbus announced that to avoid the possible tariffs, it would set up a second assembly line for the A220 at the Airbus Mobile factory.[20][21][22] The United States International Trade Commission ruled three months later that the Canadian-made planes did not threaten the U.S. airplane industry and no duty orders would be issued.[23]
See also
[edit]- Boeing Renton Factory – A competing narrow-body aircraft manufacturing facility in the United States
Notes
[edit]- ^ The other sites are in Toulouse, France, Hamburg, Germany, and Tianjin, China.
- ^ The other site is Montreal, Canada.
References
[edit]- ^ Underwood, Jerry (9 May 2022). "Airbus Alabama expansion project adding 1,000 jobs in Mobile". Made in Alabama. Retrieved 26 May 2022.
- ^ "Airbus picks Mobile, Ala. for new factory". Associated Press. 22 June 2005. Retrieved 19 March 2024.
- ^ Trimble, Stephen (14 January 2008). "KC-X win would shift A330 Freighter assembly to US". Washington DC: Flightglobal. Retrieved 1 March 2008.
- ^ "AP Source: Airbus plans factory in Alabama". Associated Press. 28 June 2012. Retrieved 30 June 2012.[dead link ]
- ^ "Airbus Is Said to Plan a Factory in Alabama". The New York Times. 27 June 2012. Retrieved 30 June 2012.
- ^ a b "Airbus is coming: Agreement approved for $600 million, 1,000-worker plant in Mobile". Press Register. 30 June 2012. Retrieved 30 June 2012.
- ^ Melissa Nelson-Gabriel (2 July 2012). "Airbus to Build 1st US Assembly Plant in Alabama". Associated Press. Retrieved 2 July 2012.
- ^ "Airbus confirms its first US factory to build A320 jet". BBC News. 2 July 2012. Retrieved 2 July 2012.
- ^ "Biz Bits – HeraldNet.com". HeraldNet.com. 9 August 2015. Retrieved 4 January 2018.
- ^ "Airbus officially opens U.S. Manufacturing Facility". Airbus. Retrieved 4 January 2018.
- ^ "Airbus delivers its first aircraft produced in the USA". www.airbus.com. Airbus. Retrieved 18 December 2016.
- ^ Appelbaum, Binyamin; Payne, Christopher (3 May 2017). "A Look Inside Airbus's Epic Assembly Line". The New York Times Magazine. Retrieved 19 March 2024.
- ^ Nodar, Janet (11 October 2018). "An Airbus cargo shift from lift-on, lift-off to roll-on, roll-off". Journal of Commerce. Retrieved 19 March 2024.
- ^ "Rising to the challenge". Airbus. 2020. Retrieved 19 March 2024.
- ^ Horn, Ashley (10 May 2022). "Airbus to Add Third Final Assembly Line in Mobile as Company Ramps Up Production". Mobile Chamber. Retrieved 19 March 2024.
- ^ Sharp, John (22 October 2020). "Airbus delivers first Mobile-made A220 aircraft". AL.com. Retrieved 28 July 2021.
- ^ "Airbus Canada can still meet its objectives at Mirabel, says boss". CTV News. The Canadian Press. 27 January 2023. Retrieved 19 March 2024.
- ^ Marowits, Ross (16 October 2017). "European giant Airbus to buy a majority stake in Bombardier's CSeries program". Retrieved 17 October 2017 – via Toronto Star.
- ^ "Airbus and Bombardier Announce C Series Partnership – Bombardier". www.bombardier.com. Retrieved 17 October 2017.
- ^ Lampert, Allison; Hepher, Tim (16 October 2017). "Airbus takes control of Bombardier CSeries in rebuff to U.S. threat". Reuters. Retrieved 17 October 2017.
- ^ Aboulafia, Richard (17 October 2017). "Winners And Losers As Airbus Bails Out Bombardier's C-Series". Forbes.com. Retrieved 4 January 2018.
- ^ "Airbus-Bombardier deal: Mobile may get another jet assembly line". Al.com. October 2017. Retrieved 4 January 2018.
- ^ "100- to 150-Seat Large Civil Aircraft from Canada Do Not Injure U.S. Industry, Says USITC" (Press release). United States International Trade Commission. 26 January 2018.