Wood: Difference between revisions
mNo edit summary |
Corrected most of this articles spelling issues |
||
Line 1: | Line 1: | ||
{{Mergefrom|Sapwood|date=July 2008}} |
{{Mergefrom|Sapwood|date=July 2008}} |
||
{{Refimprove|date= |
{{Refimprove|date=Septembree 2008}} |
||
{{otheruses}} |
{{otheruses}} |
||
{{redirect|Wooden}} |
{{redirect|Wooden}} |
||
```Wood``` be hard, fibrous, [[lignin|lignified]] structural tissue produced as secondary [[xylem]] in th' stems o' [[woody plant]]s, notably trees but also shrubs. In a livin' tree 't conducts water an' nutrients t' th' leaves an' other growin' tissues, an' has a support function, enablin' plants t' reach large sizes. Wood may also refer t' other plant materials an' tissues wi' comparable properties. |
|||
Swabbies be havin' used wood fer millennia fer many purposes, primarily as a [[construction]] material, fer makin' [[tool]]s, [[weapon]]s, [[furniture]], packagin', artworks, [[paper]], an' as a [[fuel]]. Wood can be [[Dendrochronology|dated]] t' make inferences about when a wooden object be created an' th' climate at that time. |
|||
==Formation== |
==Formation== |
||
A tree increases in [[diameter]] by |
A tree increases in [[diameter]] by th' formation, between th' old wood an' th' inner [[bark]], o' new woody layers which envelop th' entire stem, livin' branches, an' roots. 'ere thar be clear seasons, this can happen in a discrete pattern, leadin' t' what be known as [[Dendrochronology|growth rings]], as can be seen on th' end o' a log. If these seasons be annual these growth rings be annual rings. 'ere thar be nay seasonal difference growth rings be likely t' be indistinct or absent. |
||
Within a growth |
Within a growth rin' 't may be possible t' be seein' two parts. Th' part nearest th' center o' th' tree be more open [[texture]]d an' almost invariably lighter in colour than that near th' outer portion o' th' rin'. Th' inner portion be formed early in th' season, when growth be comparatively rapid; 'tis known as early wood or sprin' wood. Th' outer portion be th' late wood or summer wood, bein' produced in th' summer.[http://www.farmforestline.com.au/pages/2.1.2.1_wood.html Wood growth an' structure] www.farmforestline.com.au In [[Pinus classification|white pine]]s thar be nay much contrast in th' different parts o' th' rin', an' as a result th' wood be very uniform in texture an' be easy t' work. In [[Pinus classification|hard pines]], on th' other hand, th' late wood be very dense an' be deep-colored, presentin' a very decided contrast t' th' soft, straw-colored early wood. In ring-porous woods each season`s growth be always well defined, on accoun' o' th' large pores o' th' sprin' abut on th' denser tissue o' th' fall before. In th' diffuse-porous woods, th' demarcation between rings be nay always so clear an' in some cases be almost (if nay entirely) invisible t' th' unaided eye. |
||
===Knots=== |
===Knots=== |
||
[[Image:TreeKnot.jpg|thumb|240px|A knot on a tree at |
[[Image:TreeKnot.jpg|thumb|240px|A knot on a tree at th' [[Garden o' th' Gods]] public park in [[Colorado Springs, Colorado|Colorado Springs]], [[Colorado]] (Octobree 2006).]] |
||
A knot |
A knot be a particular type o' imperfection in a piece o' timber, which reduces its strength, but which may be exploited fer artistic effect. In a longitudinally-sawn plank, a knot will appear as a roughly circular "solid" (usually darker) piece o' wood around which th' roughly parallel fibres ([[Wood grain|grain]]) o' th' rest o' th' "flows" (parts an' rejoins). |
||
A knot |
A knot be actually a portion o' a side [[branch]] (or a dormant bud) included in th' wood o' th' stem or larger branch. Th' included portion be irregularly conical in shape (hence th' roughly circular cross-section) wi' th' tip at th' point in stem diameter at which th' plant`s [[cambium]] be located when th' branch formed as a bud. Within a knot, th' fibre direction (grain) be up t' 90 degrees different from th' fibres o' th' stem, thus producin' local cross grain. |
||
Durin' th' development o' a tree, th' lower limbs often sink t'Davy Jones' locker, but may persist fer a time, sometimes voyages. Subsequent layers o' growth o' th' attachin' stem be nay longer intimately joined wi' th' dead limb, but be grown around 't. Hence, dead branches produce knots which be nay attached, an' likely t' drop ou' after th' tree be sawn into boards. |
|||
In |
In gradin' lumber an' structural timber, knots be classified accordin' t' the'r form, size, soundness, an' th' firmness wi' which they be held in place. This firmness be affected by, among other factors, th' length o' time fer which th' branch be dead while th' attachin' stem continued t' grow. |
||
Knots materially affect |
Knots materially affect crackin' (known in th' industry as checking) an' warpin', ease in workin', an' cleavability o' timber. They be defects which weaken timber an' lower its value fer structural purposes 'ere strength be an important consideration. Th' weakenin' effect be much more serious when timber be subjected t' forces perpendicular t' th' grain an'/or [[tension (physics)|tension]] than 'ere under load along th' grain an'/or [[physical compression|compression]]. Th' extent t' which knots affect th' strength o' a [[Beam (structure)|beam]] depends upon the'r position, size, number, direction o' [[fiber]], an' condition. A knot on th' upper side be compressed, while one on th' lower side be subjected t' tension.{{Fact|date=Septembree 2008}} If thar be a season check in th' knot, as be often th' case, 't will offer wee resistance t' this tensile stress. Wee knots, however, may be located along th' neutral plane o' a beam an' increase th' strength by preventin' longitudinal [[shear stress|shearing]]. Knots in a board or plank be least injurious when they extend through 't at starboard angles t' its broadest surface. Knots which occur near th' ends o' a beam do nay weaken 't. Sound knots which occur in th' central portion one-fourth th' height o' th' beam from either edge be nay serious defects.{{cite book |
||
| last = Record |
|||
| first = Samuel J |
|||
| title = Th' Mechanical Properties o' Wood |
|||
| publisher = J. Wiley & Sons |
|||
| date = 1914 |
|||
| pages = 165 |
|||
| url = http://www.gutenberg.org/etext/12299 |
|||
| isbn = B000863N3W}} |
|||
Knots do |
Knots do nay necessarily influence th' stiffness o' structural timber. Only defects o' th' most serious character affect th' elastic limit o' beams. Stiffness an' elastic strength be more dependent upon th' quality o' th' wood fiber than upon defects in th' beam. Th' effect o' knots be t' reduce th' difference between th' fiber stress at elastic limit an' th' [[Young`s modulus|modulus]] o' rupture o' beams. Th' breakin' strength be very susceptible t' defects. Sound knots do nay weaken wood when subject t' compression parallel t' th' grain. |
||
Fer purposes fer which appearance be more important than strength, such as wall panellin', knots be considered a benefit, as they add visual texture t' th' wood, givin' 't a more interestin' appearance. |
|||
Th' traditional style o' playin' th' Basque xylophon ``[[txalaparta]]`` involves hittin' th' starboard knots t' obtain different tones. |
|||
===Heartwood |
===Heartwood an' sapwood=== |
||
[[Image:Taxus wood.jpg|300px|thumb|right|A section of a [[Taxus|Yew]] branch showing 27 annual growth rings, pale sapwood and dark heartwood, and [[pith]] (centre dark spot). The dark radial lines are small knots.]] |
|||
Heartwood is wood that has died and become resistant to decay as a result of genetically programmed processes. It appears in a cross-section as a discolored circle, following annual rings in shape. Heartwood is usually much darker than living wood, and forms with age. Many woody plants do not form heartwood, but other processes, such as decay, can discolor wood in similar ways, leading to confusion. Some uncertainty still exists as to whether heartwood is truly dead, as it can still chemically react to decay organisms, but only once (Shigo 1986, 54). |
|||
==Be seein' also== |
|||
Sapwood is living wood in the growing tree. All wood in a tree is first formed as sapwood. Its principal functions are to conduct water from the [[root]]s to the [[leaf|leaves]] and to store up and give back according to the season the food prepared in the leaves. The more leaves a tree bears and the more vigorous its growth, the larger the volume of sapwood required. Hence trees making rapid growth in the open have thicker sapwood for their size than trees of the same species growing in dense forests. Sometimes trees grown in the open may become of considerable size, 30 cm or more in diameter, before any heartwood begins to form, for example, in second-growth [[hickory]], or open-grown [[pine]]s. |
|||
* [[Driftwood]] |
|||
* [[Dunnage]] |
|||
* [[Forest]] |
|||
* [[Forestry]] |
|||
* [[List o' woods]] |
|||
* [[Lumber]] |
|||
* [[Plywood]] |
|||
* [[Tinder]] |
|||
* [[Tree]] |
|||
* [[Wood drying]] |
|||
* [[Wood economy]] |
|||
* [[Wood-plastic composite]] |
|||
* [[Wood warping]] |
|||
* [[Woodworm]] |
|||
* [[Wood preservation]] |
|||
* [[Xylophagy]] |
|||
* [[Xylotheque]] |
|||
== Notes == |
|||
The term ''heartwood'' derives solely from its position and not from any vital importance to the tree. This is evidenced by the fact that a tree can thrive with its heart completely decayed. Some species begin to form heartwood very early in life, so having only a thin layer of live sapwood, while in others the change comes slowly. Thin sapwood is characteristic of such trees as [[chestnut]], [[black locust]], [[mulberry]], [[osage-orange]], and [[sassafras]], while in [[maple]], [[Ash tree|ash]], hickory, [[Celtis|hackberry]], [[beech]], and pine, thick sapwood is the rule. |
|||
{{reflist}} |
|||
There is no definite relation between the annual rings of growth and the amount of sapwood. Within the same species the cross-sectional area of the sapwood is very roughly proportional to the size of the crown of the tree. If the rings are narrow, more of them are required than where they are wide. As the tree gets larger, the sapwood must necessarily become thinner or increase materially in volume. Sapwood is thicker in the upper portion of the trunk of a tree than near the base, because the age and the diameter of the upper sections are less. |
|||
== References == |
|||
When a tree is very young it is covered with limbs almost, if not entirely, to the ground, but as it grows older some or all of them will eventually die and are either broken off or fall off. Subsequent growth of wood may completely conceal the stubs which will however remain as knots. No matter how smooth and clear a log is on the outside, it is more or less knotty near the middle. Consequently the sapwood of an old tree, and particularly of a forest-grown tree, will be freer from knots than the heartwood. Since in most uses of wood, knots are defects that weaken the timber and interfere with its ease of working and other properties, it follows that sapwood, because of its position in the tree, may have certain advantages over heartwood. |
|||
{{Commonscat}} |
|||
{{wiktionary}} |
|||
{{refbegin}} |
|||
It is remarkable that the inner heartwood of old trees remains as sound as it usually does, since in many cases it is hundreds of years, and in a few instances thousands of years, old. Every broken limb or root, or deep wound from fire, insects, or falling timber, may afford an entrance for decay, which, once started, may penetrate to all parts of the trunk. The larvae of many insects bore into the trees and their tunnels remain indefinitely as sources of weakness. Whatever advantages, however, that sapwood may have in this connection are due solely to its relative age and position. |
|||
* {{ cite book | authorlink = R. Bruce Hoadley | last = Hoadley | first = R. Bruce | date = 2000 | title = Understandin' Wood: A Craftsman’s Guide t' Wood Technology | publisher = [[Taunton Press]] | isbn = 1-56158-358-8 }} |
|||
* Shigo, Alex. (1986) ``A New Tree Biology Dictionary``. Shigo an' Trees, Associates. ISBN 0-943563-12-7 |
|||
* [http://www.spiritofnature.net/eng/index_eng.html Th' Wood in Culture Association] |
|||
{{refend}} |
|||
{{Botany}} |
|||
If a tree grows all its life in the open and the conditions of [[soil]] and site remain unchanged, it will make its most rapid growth in youth, and gradually decline. The annual rings of growth are for many years quite wide, but later they become narrower and narrower. Since each succeeding ring is laid down on the outside of the wood previously formed, it follows that unless a tree materially increases its production of wood from year to year, the rings must necessarily become thinner as the trunk gets wider. As a tree reaches maturity its crown becomes more open and the annual wood production is lessened, thereby reducing still more the width of the growth rings. In the case of forest-grown trees so much depends upon the competition of the trees in their struggle for light and nourishment that periods of rapid and slow growth may alternate. Some trees, such as southern [[oak]]s, maintain the same width of ring for hundreds of years. Upon the whole, however, as a tree gets larger in diameter the width of the growth rings decreases. |
|||
[[Category:Forestry]] |
|||
There may be decided differences in the grain of heartwood and sapwood cut from a large tree, particularly one that is mature. In some trees, the wood laid on late in the life of a tree is softer, lighter, weaker, and more even-textured than that produced earlier, but in other species, the reverse applies. In a large log the sapwood, because of the time in the life of the tree when it was grown, may be inferior in [[hardness]], [[Strength of materials|strength]], and toughness to equally sound heartwood from the same log. |
|||
[[Category:Solid fuels]] |
|||
[[Category:Structural engineering]] |
|||
[[Category:Wood| ]] |
|||
[[Category:Woodworking| ]] |
|||
{{Link FA|hu}} |
|||
==Different woods== |
|||
[[ar:خشب]] |
|||
There is a strong relationship between the properties of wood and the properties of the particular tree that yielded it. For every tree species there is a range of density for the wood it yields. There is a rough correlation between density of a wood and its strength (mechanical properties). For example, while [[mahogany]] is a medium-dense hardwood which is excellent for fine furniture crafting, [[balsa]] is light, making it useful for [[model (physical)|model]] building. The densest wood may be [[Olea laurifolia|black ironwood]]. |
|||
[[bar:Hoiz]] |
|||
[[bs:Drvo (materijal)]] |
|||
Wood is commonly classified as either [[softwood]] or hardwood. The wood from [[Pinophyta|conifers]] (e.g. pine) is called softwood, and the wood from [[Flowering plant|broad-leaved trees]] (e.g. oak) is called hardwood. These names are a bit misleading, as hardwoods are not necessarily hard, and softwoods are not necessarily soft. The well-known balsa (a hardwood) is actually softer than any commercial softwood. Conversely, some softwoods (e.g. [[Taxus baccata|yew]]) are harder than most hardwoods. |
|||
[[bg:Дървесина]] |
|||
[[ca:Fusta]] |
|||
Wood products such as [[plywood]] are typically classified as engineered wood and not considered raw wood. |
|||
[[cs:Dřevo]] |
|||
[[da:Træ (materiale)]] |
|||
===Color=== |
|||
[[de:Holz]] |
|||
In species which show a distinct difference between heartwood and sapwood the natural colour of heartwood is usually darker than that of the sapwood, and very frequently the contrast is conspicuous. This is produced by deposits in the heartwood of various materials resulting from the process of growth, increased possibly by [[oxidation]] and other chemical changes, which usually have little or no appreciable effect on the mechanical properties of the wood. Some experiments on very resinous [[Longleaf Pine]] specimens, however, indicate an increase in strength. This is due to the [[resin]] which increases the strength when dry. Such resin-saturated heartwood is called "fat lighter". Structures built of fat lighter are almost impervious to rot and [[termite]]s; however they are very flammable. Stumps of old longleaf pines are often dug, split into small pieces and sold as kindling for fires. Stumps thus dug may actually remain a century or more since being cut. [[Spruce]] impregnated with crude resin and dried is also greatly increased in strength thereby. |
|||
[[et:Puit]] |
|||
[[el:Ξύλο]] |
|||
[[Image:Sequoia wood.jpg|300px|left|thumb|The wood of [[Sequoia|Coast Redwood]] is distinctively red in colour]] |
|||
[[es:Madera]] |
|||
Since the late wood of a growth ring is usually darker in colour than the early wood, this fact may be used in judging the density, and therefore the hardness and strength of the material. This is particularly the case with coniferous woods. In ring-porous woods the vessels of the early wood not infrequently appear on a finished surface as darker than the denser late wood, though on cross sections of heartwood the reverse is commonly true. Except in the manner just stated the colour of wood is no indication of strength. |
|||
[[eo:Ligno]] |
|||
[[eu:Zur]] |
|||
Abnormal discolouration of wood often denotes a diseased condition, indicating unsoundness. The black check in western [[Tsuga|hemlock]] is the result of insect attacks. The reddish-brown streaks so common in hickory and certain other woods are mostly the result of injury by birds. The discolouration is merely an indication of an injury, and in all probability does not of itself affect the properties of the wood. Certain [[wood-decay fungus|rot-producing fungi]] impart to wood characteristic colours which thus become symptomatic of weakness; however an attractive effect known as [[spalting]] produced by this process is often considered a desirable characteristic. Ordinary sap-staining is due to fungous growth, but does not necessarily produce a weakening effect. |
|||
[[fa:چوب]] |
|||
[[fr:Bois]] |
|||
===Structure=== |
|||
[[gan:木]] |
|||
Wood is a [[heterogeneous]], [[hygroscopic]], [[Cell (biology)|cellular]] and [[Anisotropy|anisotropic]] material. It is composed of fibers of [[cellulose]] (40% – 50%) and [[hemicellulose]] (15% – 25%) impregnated with [[lignin]] (15% – 30%).<ref>[http://www.extension.umn.edu/distribution/naturalresources/components/6413ch1.html Lesson 1: ''Tree Growth and Wood Material'' at University of Minnesota Extension] </ref>[[Image:Drva.JPG|thumb|240px|Sections of tree trunk]] |
|||
[[gd:Fiodh]] |
|||
[[Image:VeluweTreeTrunk.jpg|thumb|240px|right|A tree trunk as found at the [[Veluwe]], [[The Netherlands]]]] |
|||
[[gl:Madeira]] |
|||
[[ko:목재]] |
|||
In coniferous or softwood species the wood cells are mostly of one kind, [[tracheid]]s, and as a result the material is much more uniform in structure than that of most hardwoods. There are no [[phloem|vessel]]s ("pores") in coniferous wood such as one sees so prominently in oak and ash, for example. |
|||
[[hr:Drvo (materijal)]] |
|||
[[id:Kayu]] |
|||
[[Image:BlkWalnut-x-section.jpg|left|thumb|Magnified cross-section of a '''diffuse-porous''' hardwood ([[Juglans nigra|Black Walnut]]), showing the vessels, rays (white lines) and annual rings]] |
|||
[[be:Viður]] |
|||
The structure of the hardwoods is more complex.<ref>[http://www.uwsp.edu/papersci/biasca/ps350/Hardwood%20Structure.htm Hardwood Structure] www.uwsp.edu</ref> They are more or less filled with vessels: in some cases (oak, chestnut, ash) quite large and distinct, in others ([[Aesculus|buckeye]], [[Populus|poplar]], [[willow]]) too small to be seen plainly without a small hand lens. In discussing such woods it is customary to divide them into two large classes, ''ring-porous'' and ''diffuse-porous''. In ring-porous species, such as ash, black locust, [[catalpa]], chestnut, [[elm]], hickory, mulberry, and oak, the larger vessels or pores (as cross sections of vessels are called) are localized in the part of the growth ring formed in spring, thus forming a region of more or less open and porous tissue. The rest of the ring, produced in summer, is made up of smaller vessels and a much greater proportion of wood fibres. These fibres are the elements which give strength and toughness to wood, while the vessels are a source of weakness. |
|||
[['t:Legno]] |
|||
[[he:עץ (חומר גלם)]] |
|||
In diffuse-porous woods the pores are scattered throughout the growth ring instead of being collected in a band or row. Examples of this kind of wood are [[Tilia|basswood]], [[birch]], buckeye, maple, poplar, and willow. Some species, such as [[walnut]] and [[cherry]], are on the border between the two classes, forming an intermediate group. |
|||
[[sw:Ubao]] |
|||
[[la:Lignum]] |
|||
[[Image:Black locust end grain pores 2.jpg|thumb|right|220px|[[Black locust]] end grain, showing the '''ring-porous''' structure.]] |
|||
[[lt:Mediena]] |
|||
[[hu:Fa (anyag)]] |
|||
If a heavy piece of pine is compared with a light specimen it will be seen at once that the heavier one contains a larger proportion of late wood than the other, and is therefore considerably darker. The late wood of all species is denser than that formed early in the season, hence the greater the proportion of late wood the greater the density and strength. When examined under a microscope the cells of the late wood are seen to be very thick-walled and with very small cavities, while those formed first in the season have thin walls and large cavities. The strength is in the walls, not the cavities. In choosing a piece of pine where strength or stiffness is the important consideration, the principal thing to observe is the comparative amounts of early and late wood. The width of ring is not nearly so important as the proportion of the late wood in the ring. |
|||
[[ms:Kayu]] |
|||
[[nl:Hout]] |
|||
It is not only the proportion of late wood, but also its quality, that counts. In specimens that show a very large proportion of late wood it may be noticeably more porous and weigh considerably less than the late wood in pieces that contain but little. One can judge comparative density, and therefore to some extent weight and strength, by visual inspection. |
|||
[[ja:木材]] |
|||
[[nn:tre]] |
|||
[[Image:LightningVolt Twisting Branch Lilac tree.jpg|thumb|250px|left|The twisty branch of a [[Syringa|Lilac]] tree]] |
|||
[[nay:Treverk]] |
|||
No satisfactory explanation can as yet be given for the real causes underlying the formation of early and late wood. Several factors may be involved. In conifers, at least, rate of growth alone does not determine the proportion of the two portions of the ring, for in some cases the wood of slow growth is very hard and heavy, while in others the opposite is true. The quality of the site where the tree grows undoubtedly affects the character of the wood formed, though it is not possible to formulate a rule governing it. In general, however, it may be said that where strength or ease of working is essential, woods of moderate to slow growth should be chosen. But in choosing a particular specimen it is not the width of ring, but the proportion and character of the late wood which should govern. |
|||
[[pl:Drewno (technika)]] |
|||
[[pt:Madeira]] |
|||
In the case of the ring-porous hardwoods there seems to exist a pretty definite relation between the rate of growth of timber and its properties. This may be briefly summed up in the general statement that the more rapid the growth or the wider the rings of growth, the heavier, harder, stronger, and stiffer the wood. This, it must be remembered, applies only to ring-porous woods such as oak, ash, hickory, and others of the same group, and is, of course, subject to some exceptions and limitations. |
|||
[[ro:Lemn]] |
|||
[[qu:Qiru]] |
|||
In ring-porous woods of good growth it is usually the middle portion of the ring in which the thick-walled, strength-giving fibers are most abundant. As the breadth of ring diminishes, this middle portion is reduced so that very slow growth produces comparatively light, porous wood composed of thin-walled vessels and wood parenchyma. In good oak these large vessels of the early wood occupy from 6 to 10 per cent of the volume of the log, while in inferior material they may make up 25 per cent or more. The late wood of good oak, except for [[radius|radial]] grayish patches of small pores, is dark colored and firm, and consists of thick-walled fibers which form one-half or more of the wood. In inferior oak, such fiber areas are much reduced both in quantity and quality. Such variation is very largely the result of rate of growth. |
|||
[[ru:Древесина]] |
|||
[[scn:Lignu (materia)]] |
|||
Wide-ringed wood is often called "second-growth", because the growth of the young timber in open stands after the old trees have been removed is more rapid than in trees in the [[forest]], and in the manufacture of articles where strength is an important consideration such "second-growth" hardwood material is preferred. This is particularly the case in the choice of hickory for handles and [[spoke]]s. Here not only strength, but toughness and resilience are important. The results of a series of tests on hickory by the U.S. Forest Service show that: |
|||
[[simple:Wood]] |
|||
:"The work or shock-resisting ability is greatest in wide-ringed wood that has from 5 to 14 rings per [[inch]] (rings 1.8-5 mm thick), is fairly constant from 14 to 38 rings per inch (rings 0.7-1.8 mm thick), and decreases rapidly from 38 to 47 rings per inch (rings 0.5-0.7 mm thick). The strength at maximum load is not so great with the most rapid-growing wood; it is maximum with from 14 to 20 rings per inch (rings 1.3-1.8 mm thick), and again becomes less as the wood becomes more closely ringed. The natural deduction is that wood of first-class mechanical value shows from 5 to 20 rings per inch (rings 1.3-5 mm thick) and that slower growth yields poorer stock. Thus the inspector or buyer of hickory should discriminate against timber that has more than 20 rings per inch (rings less than 1.3 mm thick). Exceptions exist, however, in the case of normal growth upon dry situations, in which the slow-growing material may be strong and tough."<ref name=USforest>U.S. Department of Agriculture, Forest Products Laboratory. ''[http://www.fpl.fs.fed.us/documn/ts/fplgtr/fplgtr113/fplgtr113.htm The Wood Handbook: Wood as an engineering material]''. General Technical Report 113. Madison, WI.</ref> |
|||
[[sk:Drevo]] |
|||
[[sl:Les]] |
|||
The effect of rate of growth on the qualities of chestnut wood is summarized by the same authority as follows: |
|||
[[su:Kai]] |
|||
[[fi:Puuaines]] |
|||
:"When the rings are wide, the transition from spring wood to summer wood is gradual, while in the narrow rings the spring wood passes into summer wood abruptly. The width of the spring wood changes but little with the width of the annual ring, so that the narrowing or broadening of the annual ring is always at the expense of the summer wood. The narrow vessels of the summer wood make it richer in wood substance than the spring wood composed of wide vessels. Therefore, rapid-growing specimens with wide rings have more wood substance than slow-growing trees with narrow rings. Since the more the wood substance the greater the weight, and the greater the weight the stronger the wood, chestnuts with wide rings must have stronger wood than chestnuts with narrow rings. This agrees with the accepted view that sprouts (which always have wide rings) yield better and stronger wood than seedling chestnuts, which grow more slowly in diameter."<ref name=USforest/> |
|||
[[sv:Trä]] |
|||
[[tl:Kahoy]] |
|||
In diffuse-porous woods, as has been stated, the vessels or pores are scattered throughout the ring instead of collected in the early wood. The effect of rate of growth is, therefore, not the same as in the ring-porous woods, approaching more nearly the conditions in the conifers. In general it may be stated that such woods of medium growth afford stronger material than when very rapidly or very slowly grown. In many uses of wood, strength is not the main consideration. If ease of working is prized, wood should be chosen with regard to its uniformity of texture and straightness of grain, which will in most cases occur when there is little contrast between the late wood of one season's growth and the early wood of the next. |
|||
[[ta:மரம் (மூலப்பொருள்)]] |
|||
[[th:ไม้]] |
|||
===Monocot wood=== |
|||
[[vi:Gỗ]] |
|||
Structural tissue resembling ordinary 'dicot' wood is produced by a number of [[monocotyledon|monocot]] plants, and these are also usually called wood. Of these, the wood of the grass [[bamboo]] has considerable economic importance, larger culms being used in the manufacture of engineered flooring, panels and [[Wood veneer|veneer]]. Other plant groups that produce woody tissue are [[Arecaceae|palm]]s, and members of the [[Liliales]], such as [[Dracaena (plant)|Dracaena]] and [[Cordyline]]. With all these woods, the structure and composition of the structural tissue is quite different from ordinary wood. |
|||
[[tg:Чӯб]] |
|||
[[chr:ᎠᏓ]] |
|||
==Water content== |
|||
[[tr:Tahta]] |
|||
[[Image:Wooden Miracle Kizhi.jpg|thumb|right|275px|The churches of [[Kizhi]], [[Russia]] are among a handful of [[World Heritage Site]]s built entirely of wood, without metal joints.]] |
|||
[[uk:Деревина]] |
|||
[[Water]] occurs in living wood in three conditions, namely: (1) in the [[cell wall]]s, (2) in the [[protoplasm]]ic contents of the [[Cell (biology)|cells]], and (3) as free water in the cell cavities and spaces. In heartwood it occurs only in the first and last forms. Wood that is thoroughly air-dried retains from 8-16% of water in the cell walls, and none, or practically none, in the other forms. Even oven-dried wood retains a small percentage of moisture, but for all except chemical purposes, may be considered absolutely dry. |
|||
[[vec:Legno]] |
|||
[[vls:Ou']] |
|||
The general effect of the water content upon the wood substance is to render it softer and more pliable. A similar effect of common observation is in the softening action of water on paper or [[Textile|cloth]]. Within certain limits, the greater the water content, the greater its softening effect. |
|||
[[yi:האלץ]] |
|||
[[zh-yue:木]] |
|||
Drying produces a decided increase in the strength of wood, particularly in small specimens. An extreme example is the case of a completely dry [[spruce]] block 5 cm in section, which will sustain a permanent load four times as great as that which a green block of the same size will support. |
|||
[[bat-smg:Medėina]] |
|||
The greatest increase due to drying is in the ultimate crushing strength, and strength at [[Yield (engineering)|elastic limit]] in endwise compression; these are followed by the modulus of rupture, and stress at elastic limit in cross-bending, while the [[Elastic modulus|modulus of elasticity]] is least affected. |
|||
==Uses== |
|||
===Fuel=== |
|||
{{main|Wood fuel}} |
|||
Wood is burned as a fuel mostly in rural areas of the world. Hard wood is preferred over softwood because it creates less smoke and burns longer. Adding a woodstove or fireplace to a home adds ambiance and warmth.<ref>[http://www.epa.gov/woodstoves/index.html Clean Burning Wood Stoves and Fireplaces]</ref> |
|||
===Construction=== |
|||
[[Image:LightningVolt Wood Floor.jpg|thumb|right|Wood can be cut into straight planks and made into a [[hardwood]] [[floor]] ([[parquetry]]).]] |
|||
[[Image:Saitta House Dyker Heights.JPG|thumb|left|The [[Saitta House]], [[Dyker Heights]], [[Brooklyn]], [[New York]] built in 1899 is made of and decorated in wood.]] |
|||
Wood has been an important construction material since humans began building shelters, [[house]]s and [[boat]]s. Nearly all boats were made out of wood till the late 19th century, and wood remains in common use today in boat construction. New domestic housing in many parts of the world today is commonly made from timber-framed construction. In buildings made of other materials, wood will still be found as a supporting material, especially in [[roof]] construction, in interior doors and their frames, and as exterior cladding. Wood to be used for construction work is commonly known as ''[[lumber]]'' in [[North America]]. Elsewhere, ''lumber'' usually refers to felled trees, and the word for sawn planks ready for use is ''timber''. Wood is also commonly used as shuttering material to form the mould into which concrete is poured during [[reinforced concrete]] construction. |
|||
Wood unsuitable for construction in its native form may be broken down mechanically (into fibres or chips) or chemically (into cellulose) and used as a raw material for other building materials such as [[particle board|chipboard]], [[engineered wood]], [[hardboard]], [[medium-density fiberboard]] (MDF), [[oriented strand board]] (OSB). Such wood derivatives are widely used: wood fibers are an important component of most [[paper]], and cellulose is used as a component of some [[Synthesis|synthetic]] materials. Wood derivatives can also be used for kinds of flooring, for example [[laminate flooring]]. |
|||
Wood is also used for cutlery, such as [[chopsticks]], [[toothpick]]s, and other utensils, like the [[wooden spoon]]. |
|||
===In the arts=== |
|||
[[Image:Woodcarvings of cranes.jpg|right|thumb|[[Artist]]s can use wood to create delicate [[sculpture]]s.]] |
|||
{{main|Wood as a medium}} |
|||
Wood has long been used as an [[Media (arts)|artistic medium]]. It has been used to make [[sculpture]]s and [[Wood carving|carvings]] for centuries. It is also used in [[woodcut]] [[printmaking]], and for [[Wood engraving|engraving]]. |
|||
Certain types of [[musical instrument]]s, such as the [[xylophone]] and [[marimba]], are made mostly or entirely of wood. |
|||
<!-- |
|||
DO NOT ADD A "Popular culture" SECTION HERE. |
|||
There has been extensive discussion about why this is inappropriate on the article's talk page. Adding a "Pop culture" section based on the XKCD comic will be viewed as vandalism - it isn't clever or funny. Any such addition will be immediately removed, and you may be blocked from editing further. |
|||
--> |
|||
==See also== |
|||
* [[Driftwood]] |
|||
* [[Dunnage]] |
|||
* [[Forest]] |
|||
* [[Forestry]] |
|||
* [[List of woods]] |
|||
* [[Lumber]] |
|||
* [[Plywood]] |
|||
* [[Tinder]] |
|||
* [[Tree]] |
|||
* [[Wood drying]] |
|||
* [[Wood economy]] |
|||
* [[Wood-plastic composite]] |
|||
* [[Wood warping]] |
|||
* [[Woodworm]] |
|||
* [[Wood preservation]] |
|||
* [[Xylophagy]] |
|||
* [[Xylotheque]] |
|||
== Notes == |
|||
{{reflist}} |
|||
== References == |
|||
{{Commonscat}} |
|||
{{wiktionary}} |
|||
{{refbegin}} |
|||
* {{ cite book | authorlink = R. Bruce Hoadley | last = Hoadley | first = R. Bruce | date = 2000 | title = Understanding Wood: A Craftsman’s Guide to Wood Technology | publisher = [[Taunton Press]] | isbn = 1-56158-358-8 }} |
|||
* Shigo, Alex. (1986) ''A New Tree Biology Dictionary''. Shigo and Trees, Associates. ISBN 0-943563-12-7 |
|||
* [http://www.spiritofnature.net/eng/index_eng.html The Wood in Culture Association] |
|||
{{refend}} |
|||
{{Botany}} |
|||
[[Category:Forestry]] |
|||
[[Category:Solid fuels]] |
|||
[[Category:Structural engineering]] |
|||
[[Category:Wood| ]] |
|||
[[Category:Woodworking| ]] |
|||
{{Link FA|hu}} |
|||
[[ar:خشب]] |
|||
[[bar:Hoiz]] |
|||
[[bs:Drvo (materijal)]] |
|||
[[bg:Дървесина]] |
|||
[[ca:Fusta]] |
|||
[[cs:Dřevo]] |
|||
[[da:Træ (materiale)]] |
|||
[[de:Holz]] |
|||
[[et:Puit]] |
|||
[[el:Ξύλο]] |
|||
[[es:Madera]] |
|||
[[eo:Ligno]] |
|||
[[eu:Zur]] |
|||
[[fa:چوب]] |
|||
[[fr:Bois]] |
|||
[[gan:木]] |
|||
[[gd:Fiodh]] |
|||
[[gl:Madeira]] |
|||
[[ko:목재]] |
|||
[[hr:Drvo (materijal)]] |
|||
[[id:Kayu]] |
|||
[[is:Viður]] |
|||
[[it:Legno]] |
|||
[[he:עץ (חומר גלם)]] |
|||
[[sw:Ubao]] |
|||
[[la:Lignum]] |
|||
[[lt:Mediena]] |
|||
[[hu:Fa (anyag)]] |
|||
[[ms:Kayu]] |
|||
[[nl:Hout]] |
|||
[[ja:木材]] |
|||
[[nn:tre]] |
|||
[[no:Treverk]] |
|||
[[pl:Drewno (technika)]] |
|||
[[pt:Madeira]] |
|||
[[ro:Lemn]] |
|||
[[qu:Qiru]] |
|||
[[ru:Древесина]] |
|||
[[scn:Lignu (materia)]] |
|||
[[simple:Wood]] |
|||
[[sk:Drevo]] |
|||
[[sl:Les]] |
|||
[[su:Kai]] |
|||
[[fi:Puuaines]] |
|||
[[sv:Trä]] |
|||
[[tl:Kahoy]] |
|||
[[ta:மரம் (மூலப்பொருள்)]] |
|||
[[th:ไม้]] |
|||
[[vi:Gỗ]] |
|||
[[tg:Чӯб]] |
|||
[[chr:ᎠᏓ]] |
|||
[[tr:Tahta]] |
|||
[[uk:Деревина]] |
|||
[[vec:Legno]] |
|||
[[vls:Out]] |
|||
[[yi:האלץ]] |
|||
[[zh-yue:木]] |
|||
[[bat-smg:Medėina]] |
|||
[[zh:木材]] |
[[zh:木材]] |
Revision as of 18:46, 1 October 2008
![]() |
This article needs additional citations for verification. (Septembree 2008) |
```Wood``` be hard, fibrous, lignified structural tissue produced as secondary xylem in th' stems o' woody plants, notably trees but also shrubs. In a livin' tree 't conducts water an' nutrients t' th' leaves an' other growin' tissues, an' has a support function, enablin' plants t' reach large sizes. Wood may also refer t' other plant materials an' tissues wi' comparable properties.
Swabbies be havin' used wood fer millennia fer many purposes, primarily as a construction material, fer makin' tools, weapons, furniture, packagin', artworks, paper, an' as a fuel. Wood can be dated t' make inferences about when a wooden object be created an' th' climate at that time.
Formation
A tree increases in diameter by th' formation, between th' old wood an' th' inner bark, o' new woody layers which envelop th' entire stem, livin' branches, an' roots. 'ere thar be clear seasons, this can happen in a discrete pattern, leadin' t' what be known as growth rings, as can be seen on th' end o' a log. If these seasons be annual these growth rings be annual rings. 'ere thar be nay seasonal difference growth rings be likely t' be indistinct or absent.
Within a growth rin' 't may be possible t' be seein' two parts. Th' part nearest th' center o' th' tree be more open textured an' almost invariably lighter in colour than that near th' outer portion o' th' rin'. Th' inner portion be formed early in th' season, when growth be comparatively rapid; 'tis known as early wood or sprin' wood. Th' outer portion be th' late wood or summer wood, bein' produced in th' summer.Wood growth an' structure www.farmforestline.com.au In white pines thar be nay much contrast in th' different parts o' th' rin', an' as a result th' wood be very uniform in texture an' be easy t' work. In hard pines, on th' other hand, th' late wood be very dense an' be deep-colored, presentin' a very decided contrast t' th' soft, straw-colored early wood. In ring-porous woods each season`s growth be always well defined, on accoun' o' th' large pores o' th' sprin' abut on th' denser tissue o' th' fall before. In th' diffuse-porous woods, th' demarcation between rings be nay always so clear an' in some cases be almost (if nay entirely) invisible t' th' unaided eye.
Knots
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/65/TreeKnot.jpg/240px-TreeKnot.jpg)
A knot be a particular type o' imperfection in a piece o' timber, which reduces its strength, but which may be exploited fer artistic effect. In a longitudinally-sawn plank, a knot will appear as a roughly circular "solid" (usually darker) piece o' wood around which th' roughly parallel fibres (grain) o' th' rest o' th' "flows" (parts an' rejoins).
A knot be actually a portion o' a side branch (or a dormant bud) included in th' wood o' th' stem or larger branch. Th' included portion be irregularly conical in shape (hence th' roughly circular cross-section) wi' th' tip at th' point in stem diameter at which th' plant`s cambium be located when th' branch formed as a bud. Within a knot, th' fibre direction (grain) be up t' 90 degrees different from th' fibres o' th' stem, thus producin' local cross grain.
Durin' th' development o' a tree, th' lower limbs often sink t'Davy Jones' locker, but may persist fer a time, sometimes voyages. Subsequent layers o' growth o' th' attachin' stem be nay longer intimately joined wi' th' dead limb, but be grown around 't. Hence, dead branches produce knots which be nay attached, an' likely t' drop ou' after th' tree be sawn into boards.
In gradin' lumber an' structural timber, knots be classified accordin' t' the'r form, size, soundness, an' th' firmness wi' which they be held in place. This firmness be affected by, among other factors, th' length o' time fer which th' branch be dead while th' attachin' stem continued t' grow.
Knots materially affect crackin' (known in th' industry as checking) an' warpin', ease in workin', an' cleavability o' timber. They be defects which weaken timber an' lower its value fer structural purposes 'ere strength be an important consideration. Th' weakenin' effect be much more serious when timber be subjected t' forces perpendicular t' th' grain an'/or tension than 'ere under load along th' grain an'/or compression. Th' extent t' which knots affect th' strength o' a beam depends upon the'r position, size, number, direction o' fiber, an' condition. A knot on th' upper side be compressed, while one on th' lower side be subjected t' tension.[citation needed] If thar be a season check in th' knot, as be often th' case, 't will offer wee resistance t' this tensile stress. Wee knots, however, may be located along th' neutral plane o' a beam an' increase th' strength by preventin' longitudinal shearing. Knots in a board or plank be least injurious when they extend through 't at starboard angles t' its broadest surface. Knots which occur near th' ends o' a beam do nay weaken 't. Sound knots which occur in th' central portion one-fourth th' height o' th' beam from either edge be nay serious defects.Record, Samuel J (1914). Th' Mechanical Properties o' Wood. J. Wiley & Sons. p. 165. ISBN B000863N3W. {{cite book}}
: Check |isbn=
value: invalid character (help)
Knots do nay necessarily influence th' stiffness o' structural timber. Only defects o' th' most serious character affect th' elastic limit o' beams. Stiffness an' elastic strength be more dependent upon th' quality o' th' wood fiber than upon defects in th' beam. Th' effect o' knots be t' reduce th' difference between th' fiber stress at elastic limit an' th' modulus o' rupture o' beams. Th' breakin' strength be very susceptible t' defects. Sound knots do nay weaken wood when subject t' compression parallel t' th' grain.
Fer purposes fer which appearance be more important than strength, such as wall panellin', knots be considered a benefit, as they add visual texture t' th' wood, givin' 't a more interestin' appearance.
Th' traditional style o' playin' th' Basque xylophon ``txalaparta`` involves hittin' th' starboard knots t' obtain different tones.
Heartwood an' sapwood
Be seein' also
- Driftwood
- Dunnage
- Forest
- Forestry
- List o' woods
- Lumber
- Plywood
- Tinder
- Tree
- Wood drying
- Wood economy
- Wood-plastic composite
- Wood warping
- Woodworm
- Wood preservation
- Xylophagy
- Xylotheque
Notes
References
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/99/Wiktionary-logo-en-v2.svg/40px-Wiktionary-logo-en-v2.svg.png)
- Hoadley, R. Bruce (2000). Understandin' Wood: A Craftsman’s Guide t' Wood Technology. Taunton Press. ISBN 1-56158-358-8.
- Shigo, Alex. (1986) ``A New Tree Biology Dictionary``. Shigo an' Trees, Associates. ISBN 0-943563-12-7
- Th' Wood in Culture Association