Jump to content

Williams FW29

From Wikipedia, the free encyclopedia
(Redirected from Williams FW29B)
Williams-Toyota FW29
Nico Rosberg driving the FW29 at the 2007 British Grand Prix
CategoryFormula One
ConstructorWilliams[1]
Designer(s)Sam Michael (Technical Director)
Ed Wood (Chief Designer)
Loïc Bigois (Chief Aerodynamicist)
PredecessorWilliams FW28
SuccessorWilliams FW30
Technical specifications
ChassisMonocoque construction fabricated from carbon aramid epoxy and honeycomb composite structure, surpassing FIA impact and strength requirements
Suspension (front)Carbon fibre double wishbone arrangement, with composite toelink and pushrod activated torsion springs
Suspension (rear)Double wishbone and pushrod activated torsion springs and rockers
EngineToyota RVX-07 2398 cc V8. Naturally aspirated mid-mounted
TransmissionWilliams 7-speed, semi-automatic seamless-shift
Power755 hp @ 19,000 rpm[2]
FuelPetrobras
TyresBridgestone
Competition history
Notable entrantsAT&T Williams
Notable drivers16. Germany Nico Rosberg
17. Austria Alexander Wurz
17. Japan Kazuki Nakajima
Debut2007 Australian Grand Prix
Last event2007 Brazilian Grand Prix
RacesWinsPolesF/Laps
17000
Constructors' Championships0
Drivers' Championships0

The Williams FW29 was a Formula One car, built by the Williams F1 team that competed in the 2007 Formula One season. It was driven by Alexander Wurz and Nico Rosberg. The car had a Toyota engine, making it only the second time in the team's history that a Japanese car manufacturer has supplied their engines; Honda had supplied the team during the period from 1983 to 1987.

Season performance

[edit]
Alexander Wurz driving the FW29 at the 2007 Malaysian Grand Prix.

Pre-season testing

[edit]

The FW29 made its debut at the first testing session at Jerez, where Alexander Wurz completed 72 laps in the new Toyota powered car and was second fastest of a sixteen car session, only fractions slower than fastest Pedro de la Rosa of McLaren.[3] "We had two cars on track straight away with Alex and Nico," said Sam Michael, Williams's Technical Director. "Completing 611km in total on the first running day with no issues with temperatures, vibrations etc., is a good start. Motivation within the team is really high and everyone is pushing hard to get the best out of the car before the first Grand Prix. Both drivers started testing different set-up packages before midday as there are some interesting new directions with this car and the Bridgestone Potenza tyres."[3]

Livery

[edit]
Nico Rosberg driving the FW29 at the 2007 British Grand Prix.

The FW29 continued the blue and white colour scheme set by previous Williams cars with a number of sponsors, such as RBS and Reuters, being retained for the 2007 season along with a number of new sponsors, including the team's new title sponsors AT&T as well as Lenovo, a computer manufacturer from China.[4]

Chassis

[edit]

The FW29 had a number of changes from the preceding FW28. The suspension was zero keel configuration, which had become industry standard. Other notable elements of the design included another step in the undercut of the sidepod leading edge, with top louvres for cooling. The engine and exhaust underwent improvements to address the reliability issues experienced in 2006 and a lower and narrower top deck for improved aerodynamic efficiency. The other prominent differences from the FW28 included large chimneys expressly for cooling at the season's first three races in Australia; Malaysia and Bahrain, and a narrower engine cover spine.[4]

At the rear of the car, a twin pillar configuration supported a lighter and lower drag rear wing, now featuring FIA-mandatory slot gap separators to prevent deflection and a lower and wider rear impact structure as required by the regulations.

Season review

[edit]

The Williams FW29 was definitely an improvement over the disastrous Williams FW28, which only scored 11 points and was hugely unreliable. The FW29 proved a consistent challenger for points, but was well off the pace of the front running McLaren and Ferrari cars, and the new BMW Sauber team formed by Williams's old engine partners. Alexander Wurz had a mixed season, achieving an unlikely podium finish at the 2007 Canadian Grand Prix despite suffering a damaged rear wing caused by a collision with Vitantonio Liuzzi but had an unsuccessful second half of the season. However, Rosberg proved to be a faster driver, scoring frequent points finishes and consistently outpacing Wurz, particularly in the 2nd half of the season. Wurz decided to retire from F1 before the final race of the season, with test driver Kazuki Nakajima drafted in as his replacement. The team were classified in 4th place with 33 points, due to McLaren's expulsion from the Championship.

Williams FW29B

[edit]

Williams appeared with the FW29B at Jerez during the winter testing at in January 2008. The car was fitted with several aerodynamic changes which would be adopted on the FW30. Both Rosberg and Nakajima tested with the car.[5]

Complete Formula One results

[edit]

(key) (results in bold indicate pole position)

Year Team Engine Tyres Drivers 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Points WCC
2007 Williams Toyota V8 B AUS MAL BHR ESP MON CAN USA FRA GBR EUR HUN TUR ITA BEL JPN CHN BRA 33 4th
Germany Nico Rosberg 7 Ret 10 6 12 10 16 9 12 Ret 7 7 6 6 Ret 16 4
Austria Alexander Wurz Ret 9 11 Ret 7 3 10 14 13 4 14 11 13 Ret Ret 12
Japan Kazuki Nakajima TD TD TD TD TD 10

Footnotes

[edit]
  1. ^ "The Williams-Toyota FW29 technical specification". Archived from the original on 2007-02-16. Retrieved 2007-02-16.
  2. ^ "Engine Toyota". www.statsf1.com. Retrieved 26 November 2020.
  3. ^ a b "First impressions - Williams is quick". GrandPrix.com. February 7, 2007. Retrieved 2007-02-07.
  4. ^ a b Principessa (February 2, 2007). "Williams launches the FW29". f1Technical.net. Retrieved 2007-02-08.
  5. ^ "Williams Jerez test notes 2008-01-14". Motorsport.com. Retrieved 28 September 2022.