Van's Aircraft RV-3
RV-3 | |
---|---|
![]() | |
Role | Kit aircraft |
National origin | United States |
Manufacturer | Van's Aircraft |
Designer | Richard VanGrunsven |
Introduction | 1971 |
Status | RV-3: Production completed RV-3B: In production |
Number built | 305 (February 2023)[1] |
Developed from | Stits Playboy |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/06/VansRV-301.jpg/220px-VansRV-301.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fb/VansRV-303.jpg/220px-VansRV-303.jpg)
The Van's RV-3 is a single-seat, single-engine, low-wing kit aircraft sold by Van's Aircraft.[2] Unlike many other aircraft in the RV line, the RV-3 is only available as a tail-wheel equipped aircraft, although it is possible that some may have been completed by builders as nose-wheel versions. The RV-3 is the genesis design for the rest of the RV series, all which strongly resemble the RV-3. The RV-4 was originally developed as a two-seat RV-3.
Development
[edit]The architect of the line of Van's aircraft, Richard VanGrunsven, designed the RV-3 in the late 1960s after experience flying the Stits Playboy amateur-built aircraft. The RV-3 started out as an attempt to maintain the Playboy's layout and concept but to improve it in every regard. The RV-3 was designed to have light handling, aerobatic capabilities, fast cruise speeds, and short field STOL capabilities. The RV-3 was also designed from the start for serious travel and as such carries 30 US gallons of fuel, giving it a range of about 600 statute miles. The design horsepower is 100–150, typically using a Lycoming O-235 or Lycoming O-320 powerplant. Some builders have fitted RV-3s with more powerful engines, however.[3][4][5][6][7]
The RV-3 uses a NACA 23012 airfoil on a constant chord wing. Construction is semi-monocoque of predominantly 2024-T3 aluminum sheet. The wings are built around an aluminum I-beam spar with a lighter rear spar. The aircraft has plain flaps operated by a handle. The main landing gear is attached directly to the welded steel engine mount and consists of tapered, sprung steel rods. Construction time for the RV-3 is reported to be 1300 hours for a first time builder.[3][5][6]
The very first RV-3 built by VanGrunsven won "Best Aerodynamic Detailing" at the 1972 EAA Oshkosh Convention. It also won the 1973 AC/EAA Efficiency Contest.[3][6]
There is an RV-3A model, but its designation does not follow VanGrunsven's normal system, where "A" models are nosewheel equipped versions. An RV-3A is an early RV-3 that has undergone rear spar and wing root upgrades as described in Van's publication CN-1. Due to ongoing structural concerns, the production of RV-3 kits was suspended in 1996. Continued customer demand for the single seat design resulted in VanGrunsven engineering a new wing for the RV-3. Production of kits was restarted a few years later. New aircraft completed since the wing redesign and aircraft that have been retrofitted with the new wing are referred to as an RV-3B.[7]
By February 2023, 305 RV-3s had been completed and flown.[1]
Aircraft on display
[edit]- EAA AirVenture Museum – RV-3 Prototype N17RV[8]
Specifications (RV-3B)
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/02/VansRV-3InstrumentPanel07.jpg/220px-VansRV-3InstrumentPanel07.jpg)
Data from Manufacturer[9]
General characteristics
- Crew: one pilot
- Capacity: no passengers
- Length: 19 ft 0 in (5.79 m)
- Wingspan: 19 ft 11 in (6.07 m)
- Height: 5 ft 0 in (1.52 m)
- Wing area: 90 sq ft (8.4 m2)
- Empty weight: 750 lb (340 kg)
- Gross weight: 1,100 lb (499 kg)
- Max takeoff weight: 1,100 lb (499 kg)
- Fuel capacity: 30 US gal (110 L; 25 imp gal)
- Powerplant: 1 × Lycoming O-320 fixed pitch, 150 hp (110 kW)
Performance
- Maximum speed: 207 mph (333 km/h, 180 kn) at sea level
- Cruise speed: 196 mph (315 km/h, 170 kn) 75% power at 8,000 ft (2,500 m)
- Stall speed: 51 mph (82 km/h, 44 kn)
- Range: 595 mi (958 km, 517 nmi) at cruise 75% power at 8,000 ft (2,500 m)
- Service ceiling: 23,500 ft (7,200 m)
- Rate of climb: 2,050 ft/min (10.4 m/s)
- Wing loading: 12.22 lb/sq ft (59.7 kg/m2)
- Power/mass: 7.3 lb/hp
See also
[edit]Related development
Aircraft of comparable role, configuration, and era
References
[edit]- ^ a b Van's aircraft (February 2023). "First Flights". Retrieved February 10, 2023.
- ^ Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 74. Belvoir Publications. ISSN 0891-1851
- ^ a b c Plane and Pilot, 1978 Aircraft Directory, page 159, Werner and Werner, Santa Monica CA 1978
- ^ Van's Aircraft (2005). "Van's Aircraft RV-3". www.vansaircraft.com. Archived from the original on June 15, 2006. Retrieved February 10, 2023.
- ^ a b Armstrong, Kenneth, Choosing Your Homebuilt – The One You'll Finish And Fly, pages 363, Butterfield Press, Templeton CA 1993.
- ^ a b c Bowers, Peter M, Guide to Homebuilts, page 234, 9th Edition, TAB Books Blue Ridge Summit PA, 1984.
- ^ a b Van's aircraft. "RV-3 Experience the Original RV Grin". vansaircraft.com. Archived from the original on January 3, 2023. Retrieved February 10, 2023.
- ^ EAA AirVenture Museum (2012). "Van Grunsven RV-3 Prototype – N17RV". Retrieved May 11, 2012.
- ^ Van's Aircraft. "Introducing the Van's RV-3 through RV-9" (PDF). vansaircraft.com. Archived (PDF) from the original on August 22, 2022. Retrieved February 10, 2023.
External links
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)