Jump to content

Turbomeca Aspin

From Wikipedia, the free encyclopedia
(Redirected from Turbomeca Aspin I)
Aspin
Type Turbofan
National origin France
Manufacturer Turbomeca
First run 1951

The Turbomeca Aspin was a small French turbofan engine produced by Turbomeca in the early 1950s. This geared turbofan design was the first turbofan to fly, powering the Fouga Gemeaux test-bed aircraft on 2 January 1952.[1]

Variants

[edit]
Aspin I
200 kg (440 lb) thrust
Aspin II
350 kg (770 lb) thrust

Applications

[edit]

Specifications (Aspin II)

[edit]

Data from Aircraft engines of the World 1953.[2]

General characteristics

  • Type: Geared turbofan
  • Length: 1,614 mm (63.5 in)
  • Diameter: 604 mm (23.8 in)
  • Dry weight: 138 kg (304 lb)

Components

  • Compressor: Single-stage geared axial flow fan, single-stage centrifugal flow compressor
  • Combustors: Annular combustion chamber
  • Turbine: Two-stage axial flow turbine
  • Fuel type: Kerosene
  • Oil system: Dry sump, Turbomeca gear pump at 5.9 bar (85 psi)

Performance

Take-off: 3.6 kN (800 lbf)
Max Continuous: 3.14 kN (705 lbf)
Fan: 1.15:1 at 35,000 rpm / sea level
Compressor: 3.8:1 at 35,000 rpm / sea level
  • Air mass flow:
Fan:21 kg/s (46 lb/s) at 35,000 rpm / sea level
Compressor:3.0 kg/s (6.6 lb/s) at 35,000 rpm / sea level

See also

[edit]

Related development

Comparable engines

Related lists

References

[edit]
Notes
  1. ^ Gunston 1989, p. 169.
  2. ^ Wilkinson 1953, pp. 166-167
Bibliography
  • Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
  • Wilkinson, Paul H. Aircraft engines of the World 1953. London, England. Sir Isaac Pitman & Sons Limited. 1953.
[edit]