Tank connector
(Redirected from Tank Connectors)
 |
Tank connectors are a type of tank fitting also known as tank inlets, tank outlets, or tank nipples. This fitting must be leakage proof, as the water supply (inward and outward) depends on same. Many different varieties of tank connectors exist.
Tank connectors are widely made of plastic (PVC) or brass. They have a flange either on the edge of one side or in the center. They are supplemented with a rubber washer or a plastic washer with one or two hexagonal flange nuts to tighten the connector to the tank wall. Those with two nuts usually require some silicone or other sealant to prevent fluid passing along the threads.
The size of a connector varies from 1/2 to 4 in.