Talk:Manifold/Archive 1

This is an archive of past discussions about Manifold. Do not edit the contents of this page. If you wish to start a new discussion or revive an old one, please do so on the current talk page.

Archive 1

Archive 2

Archive 3

→

Archive 5

A manifold can be thought of as a set of coordinate systems such that any point in one coordinate system can be made the origin of coordinates in other coordinate systems of the set. The application of a manifold is that if one observer sets up coordinates to study space or space time at one origin, while another does the same thing somewhere else, and then the structure of the manifold describes the relationships between points in one set of coordinates and those of the other. Manifolds inherit many of the local properties of Euclidean space. But if parallel lines are drawn in one coordinate system, and extended across others, they do not necessarily remain parallel.

I moved this paragraph here because while I think our manifold article needs a first paragraph explaining the use and ideas behind manifolds for non-specialists, the above paragraph doesn't do the job:

a manifold is not a set of coordinate systems: a manifold is some "curved" space or surface where coordinate systems can be introduced locally. The space or surface is the central object; the coordinate systems are just crutches.
space time is conceptualized as a manifold, and that definitely should be stated.
the parallel line statement has to do with Riemannian manifolds; you can't talk about parallel lines in manifolds unless you have a concept of distance and angle.

--AxelBoldt

I suspect that the bit about parallel lines was actually a reference to lines with constant coordinates (except for 1 coordinate). In a Riemannian manifold (or more generally, a manifold with a connection on the tangent bundle), parallel lines are chart independent, and lines that are parallel in one chart will be parallel in another. What the paragraph's claim really comes down to is that charts can't be used to define a notion of parallelism in a general manifold, which is indeed the case. -- Toby Bartels

Perhaps someone could add a definition for paracompact? I assume I'm not the only one who's clueless in this regard... --Belltower

The article says to look at the Topology Glossary. I don't think we really need a whole article on paracompactness, unless someone is keen to write one. --Zundark, 2001 Sep 21

I'm keen to write one -- there's a lot more to the idea of paracompactness than the definition; otherwise, it would never have been defined in the first place (except maybe once, in sombody's doctoral thesis, and then forgotten) -- although it may be a while before I get to it -- there are several other articles that I'm keen to write. -- Toby Bartels 2002/05/07

There is a selflink on the page, the link to differential space goes to a redirect which goes back to — manifold. Somebody knows where it is supposed to point? Mikez 18:28, 20 Feb 2004 (UTC)

The phrase "however there is a classification simply connected manifolds of dimension ≥ 5." seems to be missing a word. Perhaps what was meant was, "however there is a classification of simply connected manifolds of dimension ≥ 5."

Also, since I came here from the Wikipedia page about General Relativity, somewhere we need a definition of _Pseudo_ Riemannian manifolds. Here I found only that for Riemannian. Or does that really belong back on the General Relativity page?

See pseudo-Riemannian manifold. Charles Matthews 08:14, 18 Mar 2004 (UTC)

If you see a mistake or omission like that, be bold and edit it yourself. No need to discuss it here first. -- Fropuff 17:56, 2004 Mar 18 (UTC)

Two Ck atlases are called equivalent if their union is a Ck atlas. This is an equivalence relation, and a Ck manifold is defined to be a manifold together with an equivalence class of Ck atlases.

I have little background in manifolds, but I have seen two (essentially equivalent) definitions -- this one, and the definition that a Ck structure is defined to be a maximal Ck atlas (existence usually guaranteed by choice) and then Ck manifold defined as manifold with a Ck strucutre. Of course, this is practically identical, but not quite. Even so, just a mention of this alternate definition might be worthwhile for someone who is first seeing a definition.

Simplified introduction

I remove it again, it might go to dimension (if it would be written better) Tosha 06:15, 21 Nov 2004 (UTC)

Please do not add it any more, it has little to do with concept of manifold Tosha 01:06, 22 Nov 2004 (UTC)

On the manifold article: i disagree. I'll be terse here with all due respect.

If one wants peer review stuff and the whole bag of academia, one can go edit professional math publications or professional encyclopedias. The world are not lacking those.

the spirit and essential advantage of wikipedia is speedy, haphazard, incremental improvement, by any joe. It is what made wikipedia a success. In many aspects, far beyond the scope and up-to-dateness and perspectives than professional publications. If an article or paragraph is badly written, it's probably better to edit it in whatever amount one can spare instead of deleting it.

my point of view above about math expositon is my own, and i admit not the existing professional practice de jure. But i'm certain that in the communication tech advancement of today as exhibited by the internet, the traditional way of knowledge dissemination is changing fast. Wikipedia is just the tip of an ice burg. In mere a couple of years, it is competitive with professionally edited encyclopedias by PH Ds etc, and in many aspects better.

that short paragraph in question isn't a tech description of manifold. The tech description follows. Manifold in a few words, is a smooth shaped-space in arbitrary dimensions. Top mathematicians cannot deny that. Math should avoid habituating in a collection of jargonization or latest paraphenalia of technicalities understandable only to a small clique of experts of the field in question.

It is great to have an explanation of manifold to 99.99% of intelligent, inquisitive, encyclopedia reading readers, including professionals and science students in diverse fields. Without that, arguably the remaining iota of percentage of those educated who has as far as 2 years of calculus, will get away with 0 understanding of what manifold mean.

Tosha, please consider my arguments.

i will put the simple exposition one more time for now. Feel free to edit, or delete if you see fit, as that is the process of argument and progress. Xah Lee 09:37, 2004 Nov 22 (UTC)

I have to agree with User:Tosha and User:Charles Matthews. Exposition of math topics for the laymen is a difficult topic but your edits do not provide any value. Your choice of words (like progenitor) and your spelling mistakes on important names (like Reiman and Frederic Gauss) show a lack of serious effort to increase the value of the article. If you are really serious about trying to explain manifold then start a new article like manifold for the laymen trying to clearly communicate your ideas there. Later any good paragraphs can be incorporated into the main article.

In my opinion User:Tosha and User:Charles Matthews are not trying to obfuscate topics or introduce unnecessary jargonization into articles. They probably both have teaching experience and are aware of the difficulty of trying to explain mathematical concepts to mathematicians and laymen alike. You on the other hand, having read about those topic on your own (which is laudable), have probably no expericence trying to clearly communicate those ideas to other persons. Your explanation may make sense to yourself (most people have a specific way of making ideas clear to themselves) but it confuses other people.

MathMartin 12:57, 22 Nov 2004 (UTC)

I agree that the current introduction by Xah Lee is poorly written and adds little to the article. That being said, I must agree with his sentiment that this article desperately needs a more gentle introduction. The first paragraph at least should be understandable to someone without any training in topology. Physics students in particular come across manifolds before ever having seen the word topology, let alone words Hausdorff, paracompact, or homeomorphic. For many of these students manifolds are their first introduction to topology. I've been meaning for a long time to write a better introduction, I just haven't had the time. In the meantime the current introduction by Xah Lee should probably be removed. -- Fropuff 16:34, 2004 Nov 22 (UTC)

To make myself clear, I do not think the manifold article has a good introduction, but this is no reason to add poorly written content to an otherwise solid article. Perhaps Fropuff should have a try at writing a better introduction (without using Hausdorff, paracompact, or homeomorphic) MathMartin 17:12, 22 Nov 2004 (UTC)

jesus...

why can't academicians understand anything? with either their verbiage of jargonization or simplistic populariralizazations.

a manifold is a generalization of curves and surfaces. In 3 words: a smooth shaped-space, Period.

Readers: fight a good war. Try to put the right intro back.

Xah Lee 11:13, 2004 Nov 23 (UTC)

No, not all manifolds are smooth, actually. And there can be more than one smooth structure on a manifold. These are very unobvious facts. But we can't have anything in the introduction that actually contradicts the facts.

Charles Matthews 11:24, 23 Nov 2004 (UTC)

Hmmm...interesting discussion going on. I agree that Xah Lee's explanation is rather incoherent. As MathMartin has cogently observed, it's difficult to explain mathematics to laymen in an intuitive manner without introducing notions that describe something quite different. I hope we all agree that any layman explanation is something that it should be possible to build on, without having to tear down previously set ideas. The current intro looks great! Personally, I would like more mention of how patches of Euclidean space are glued together (with a note that the degrees and kinds of niceness in gluing give rise to different structures), but as it stands, I can't complain. --C S 00:59, Dec 13, 2004 (UTC)

the bout of a quality explanation

I, Xah Lee, hereby declare, that the original explanation i inserted for this article, roughly equivalent to the cited following, is an excellent explanation of manifold, if not the best. Further, i hereby declare all academics who say otherwise, are grave morons. Morons, i say, and i mean it.

Manifold explanation by Xah Lee: Manifold, like polytope, is a generic name for certain concept of arbitrary dimensions. In 2-D, we have curves. For example, take out a piece of paper and scribble on it with a pencil in one stroke. What you have drawn, is a curve, or plane curve. The curves themselves are of 1-dimension, but they sits in a 2-dimensional plane. Now imagine the path of a fly. That would be a curve in space, called space curve. The curve itself is still one dimensional, but sits now in a 3 dimensional space. But now in 3-dimensions, we can have something else beside curves, namely surfaces. The paper you took out earlier, would be a flat surface called a plane, which is a 2-dimensional object, sitting in 3-d space. You can bend the paper or roll up into a cylinder and its still a surface in space. There can be lots of surfaces. A soap bubble, is a specific surface called sphere or hemisphere. A flag is a surface. A open umbrella is a surface. The gist here is that in 3-D space we can have 1-D objects like curves, or 2-D objects like surfaces. As with regular solids of higher dimensions, mathematician's imagination faculties thought about curves and surfaces in higher dimensions. Basically, in n-dimension you can have "curves/surfaces thing" that has dimensions less then n. For example, in 3-D we've seen the 2-D surfaces or the 1-D curves, and in 2-D plane we can have 1-D curves or 0-D dots. Therefore, in 4-dimensional space, we can have not only 0-D dots or 1-D curves or 2-D surfaces, but we can also have "curve/surface-like thing" that is 3-dimensional, sitting in a 4-dimensional space. The general name for these curve/surface-like "things" in arbitrary dimensions is called _MANIFOLD_. Thus, a curve is just a 1-dimensional manifold. A surface is a 2-dimensional manifold.

The above is exerpted from originally a newsgroup posting, archived here: http://xahlee.org/UnixResource_dir/writ/mathterms.html (will needs to be turned into an essay later)

Now, there are few mathematicians here. I have a advice for you: acquaint diverse fields, and get an overview of the history of mathematics, and step outside of your abode and understand social sciences and history of literature of human animals. Then you may perecive the quality of my manifold explanation. (baring a few grammatical errors or non-standard phrasings)

Xah Lee 17:36, 2004 Dec 13 (UTC)

gentlemen, have a look at the Curves page: http://wiki.riteme.site/wiki/Curve a simple idea of length is chalked up by moronic math academicians to metric space with incomprehensible formulas. Xah Lee 20:11, 2004 Dec 30 (UTC)

here and now i'll explain the moronicity of the current introduction.

First, assume our audience is someone who, is a math student, and has already painstakingly finished 2 years of undergraduate math courses of USA standard, including multivariable calculus, and as well as first courses in linear algebra and differential equations. A commendable task that less than one percent of college-educated elite can say for themselves, and perhaps one in a million among the literate of the world.

Now, in my introduction of manifold, any non-moron who are ignorant of calculus will however understand fully, and come away with an appreciation of the imagination of mathematics and the depth of mathematicians.

Now, in the current introduction, it gives:

   * near every point of the space, we have a coordinate system; or
   * near every point, the environment is like that in Euclidean space of a given dimension.

Now, what is meant by these clauses? Coordinate system?? Euclidean space??? laymen would have no clue. College-going sophomores share the befuddlement.

Some academicians obsess about certain minute correctness or rigor. These academicians, when pressed, would know zilch of alternative representations of the object under different systems of foundation. They write what they wont because all their life they have submerged in mediocre conventional math texts of this era of associated styles and thoughts. And their ignorance of the whole establishment of mathematics and its movements and their professorship status exasperated and habituated a haughtiness to them.

To our readers, the current introduction with Coordinate Systems and Euclidean Space is as good as none. They are mere guises of an underlying formal system sans the actual jargon. They fail to capture the meaning of manifold that captured the (great and real) mathematician's imaginations. The current into is good only to math professors who ALREADY KNEW what manifold is. It's a masturbation. (the vast majority of math texts are all like that.)

Mathematicians in general are a class of specialized morons. They know only an extremely narrow specialization, like that of calculator to numbers, a plumber to pipes. They know almost nothing or understands nothing outside of a tiny math cavity or academic bureaucratics.

The concept of a manifold and huge number of other math subjects are something a child can appreciate, but mathematicians actively prevented that. This in part, unbeknownst to themselves, subconsciously a protection mechanism of their own status. And this is in general is true of scholars in other fields.

Xah Lee 08:18, 2005 Jan 5 (UTC)

Categories

Simplified introduction

the bout of a quality explanation