Jump to content

Stolp Acroduster

From Wikipedia, the free encyclopedia
(Redirected from Stolp Acroduster I)

Acroduster I SA700
Role Homebuilt aerobatic biplane
National origin United States
Manufacturer Stolp Starduster Corporation
Designer Jim Osborne

The Acroduster I SA700 is an American single-seat homebuilt aerobatic biplane.

Development

[edit]

The Acroduster was an elliptical-winged biplane built with the intention of competing against the Pitts Special.

Design

[edit]

The aircraft also owes some of its design to the Midget Mustang. The fuselage is of aluminum construction rather than the popular tube and fabric for the type. The wings are similar to the Stolp Starduster. Roll rate is 240 degrees per second.[1]

Variants

[edit]

Specifications (Acroduster 1)

[edit]

Data from Buy planes for sale[2]

General characteristics

  • Length: 15.8 ft (4.8 m)
  • Wingspan: 19 ft (5.8 m)
  • Wing area: 105 sq ft (9.8 m2)
  • Empty weight: 740 lb (336 kg)
  • Gross weight: 1,190 lb (540 kg)

Performance

  • Cruise speed: 143 kn (165 mph, 265 km/h)
  • Stall speed: 61 kn (70 mph, 113 km/h)
  • Range: 300 nmi (345 mi, 555 km)
  • Service ceiling: 12,000 ft (3,700 m)
  • Rate of climb: 3,000 ft/min (15 m/s)

See also

[edit]

Notes

[edit]
  1. ^ "Acroduster One pilot report". Airbum.com. Retrieved November 26, 2013.
  2. ^ "Stolp Acroduster One SA700 Aircraft For Sale". Buyplanesforsale.com. Retrieved November 26, 2013.

References

[edit]
  • Budd Davisson, Air Progress, 1975
  • Sport Aviation, August 1972 pp. 38 Stolp Arcroduster
  • Sport Aerobatics, August 1974 pp. 14 New Unlimited Machine - Acroduster I