Jump to content

Star-Lite Warp 1-A

From Wikipedia, the free encyclopedia
(Redirected from StarLite Warp)

Warp 1-A
Role Homebuilt aircraft
National origin United States
Manufacturer Star-Lite Engineering
Introduction 1996
Status Production completed
Number built At least one

The Star-Lite Warp 1-A is an American homebuilt aircraft that was designed and produced by Star-Lite Engineering of Englewood, Ohio, introduced in 1996. When it was available the aircraft was supplied as a kit for amateur construction.[1]

Design and development

[edit]

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 250 lb (113 kg).[1]

The Warp 1-A features a cantilever mid-wing, a single-seat enclosed cockpit under a bubble canopy, fixed tricycle landing gear with wheel pants, a boom-mounted T-tail and a single pod-mounted engine in pusher configuration.[1]

The aircraft is made from composites. Its 25.0 ft (7.6 m) span wing is made with an aluminum spar and S-glass vinyl-ester resin, is detachable for ground transport or storage and has a wing area of 87.5 sq ft (8.13 m2). The standard engine used is the 50 hp (37 kW) Rotax 503 two-stroke powerplant.[1][2]

The Warp 1-A has a typical empty weight of 250 lb (110 kg) and a gross weight of 575 lb (261 kg), giving a useful load of 325 lb (147 kg). With full fuel of 5 U.S. gallons (19 L; 4.2 imp gal) the payload for the pilot and baggage is 295 lb (134 kg).[1][2]

The standard day, sea level, no wind, take off and landing roll with a 50 hp (37 kW) engine is 150 ft (46 m).[1]

The manufacturer estimates the construction time from the supplied kit as 100 hours.[1]

Operational history

[edit]

In March 2014 one example, the prototype, was registered in the United States with the Federal Aviation Administration as an Experimental - Amateur-built, although its registration expired in June 2013.[3]

Specifications (Warp 1-A)

[edit]

Data from AeroCrafter and the manufacturer[1][2]

General characteristics

  • Crew: one
  • Wingspan: 25 ft 0 in (7.62 m)
  • Wing area: 87.50 sq ft (8.129 m2)
  • Aspect ratio: 7:1
  • Empty weight: 250 lb (113 kg)
  • Gross weight: 575 lb (261 kg)
  • Fuel capacity: 5 U.S. gallons (19 L; 4.2 imp gal)
  • Powerplant: 1 × Rotax twin cylinder, air-cooled, two stroke aircraft engine, 50 hp (37 kW)
  • Propellers: 2-bladed fixed pitch

Performance

  • Cruise speed: 95 mph (153 km/h, 83 kn)
  • Stall speed: 40 mph (64 km/h, 35 kn)
  • Never exceed speed: 110 mph (180 km/h, 96 kn)
  • Service ceiling: 12,000 ft (3,700 m)
  • Rate of climb: 900 ft/min (4.6 m/s)
  • Wing loading: 6.6 lb/sq ft (32 kg/m2)

References

[edit]
  1. ^ a b c d e f g h Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 257. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
  2. ^ a b c Star-Lite Engineering (1996). "Warp 1-A Ultralight". Archived from the original on May 30, 1998. Retrieved March 11, 2014.
  3. ^ Federal Aviation Administration (March 11, 2014). "Make / Model Inquiry Results". Retrieved March 11, 2014.
[edit]