Jump to content

W. T. Preston

Coordinates: 48°30′58″N 122°36′33″W / 48.51611°N 122.60917°W / 48.51611; -122.60917
From Wikipedia, the free encyclopedia
(Redirected from Snagboat W.T. Preston)

W. T. Preston
W. T. Preston in her dry berth in Anacortes, Washington
History
United States
Launched1929
Out of service1981
Refit1939 (re-hulled)
StatusMuseum ship
General characteristics
Tonnage490 Gross Tons
Length163 ft 6 in (49.83 m)
Beam34 ft 8.5 in (10.579 m)
Draft3 ft 8 in (1.12 m)
Installed power
  • 180 psi (1,200 kPa) Firetube boiler
  • 2 × 150 hp (110 kW) reciprocating steam engines
PropulsionSternwheel
Speed9 knots (17 km/h; 10 mph) (cruise) 12 knots (22 km/h; 14 mph) (max)
W. T. Preston (snagboat)
W. T. Preston is located in Washington (state)
W. T. Preston
LocationAnacortes waterfront, R Avenue, at foot of 7th Street, Anacortes, Washington
Coordinates48°30′58″N 122°36′33″W / 48.51611°N 122.60917°W / 48.51611; -122.60917
Built1929 (re-hulled in 1939)
ArchitectLake Union Drydock Co.
Architectural styleWelded Barge Hull, Wooden Super Structure, Sternwheeler
NRHP reference No.72001270
Significant dates
Added to NRHP16 March 1972[2]
Designated NHL5 May 1989[3]
Designated SEATLMarch 14, 1977[1]

W. T. Preston is a specialized sternwheeler that operated as a snagboat, removing log jams and natural debris that prevented river navigation on several Puget Sound-area rivers. She is now the centerpiece of the Snagboat Heritage Center in Anacortes, Washington. She was designated a National Historic Landmark in 1989.[3] Built in 1929, she is one of two surviving snagboats built and operated by the United States Army Corps of Engineers, and the only one on the American west coast.[4]

History

[edit]

W. T. Preston operated from Olympia to Blaine, including the Skagit, Stillaguamish, and Snohomish rivers. Dead trees that reached Puget Sound often became half-submerged deadheads that could pierce the hulls of wooden vessels. The federal government began building snagboats to remove obstructions and facilitate river based commerce. W. T. Preston was named in honor of the only civilian engineer to work for the Army Corps of Engineers at the time of her construction in 1929. W. T. Preston used the main single expansion reciprocating steam engines, as well as many pumps and other hardware from her 1914 predecessor Swinomish. The Swinomish was built to replace the earlier Skagit, the first snagboat to work the rivers of the Puget Sound.

Dedication of the Hiram M. Chittenden Locks on 4 July 1917, showing the Swinomish in the background, from which the W.T. Preston was built.

In many respects the W. T. Preston is similar to the Samson V, a former Canadian Department of Public Works snagboat now preserved as a museum in New Westminster, British Columbia. Sternwheeler machinery was simple and rugged and often outlasted the shallow-draughted hulls of the vessels. When the Samson V was built in 1937 it incorporated engines and a paddlewheel shaft from the Samson II of 1905, A-frame crane components from the Samson III of 1914 and the steam-winch from the Samson IV of 1924. Like the W. T. Preston, the Samson V maintained waterways for navigation and when retired in 1980, she was the last steam-powered paddlewheeler running in Canada.

The original W. T. Preston was a 163-foot, wooden-hulled vessel which pulled snags, performed light dredging, and otherwise worked the waters of Puget Sound until 1939; when, the Army Corps of Engineers built a new superstructure atop a welded steel hull and transferred the stern wheel, main engines, smokestack, foredeck equipment, and other items onto the second WT Preston. The mission of W. T. Preston changed throughout the years. As rivers were used less and less for transportation of goods, W. T. Preston began to dredge, fight fires, and perform other general work. Throughout her commission, she even retrieved a sunken military bomber, and several automobiles.

The Army Corps of Engineers operated W. T. Preston out of the Hiram M. Chittenden Locks, in Seattle, Washington. This boat served the Puget Sound for more than forty years before the Army Corps retired her in 1981. Her replacement, Puget, still operates today out of W. T. Preston's previous dock at the Hiram M. Chittenden Locks.

Snagboat Heritage Center

[edit]

W. T. Preston is now permanently dry berthed on the waterfront near Cap Sante, in Anacortes, Washington. The vessel is a National Historic Landmark and remains officially a designated city historic landmark in Seattle (her former location). The ship now operates as a history museum, and is owned and operated by the City of Anacortes' City Museum. In 2005, the Snagboat Heritage Center was built just north of W. T. Preston. This interpretive center houses artifacts, models, maps and other historical text and information about the snagboats that maintained the area's navigable waterways.[5]

The Snagboat Heritage Center

See also

[edit]

References

[edit]
  1. ^ "Landmarks and Designation". City of Seattle. Retrieved March 5, 2013.
  2. ^ "National Register Information System". National Register of Historic Places. National Park Service. January 23, 2007.
  3. ^ a b "W.T. PRESTON (Snagboat)". National Historic Landmarks Program. National Park Service. Retrieved June 26, 2008.
  4. ^ "NHL nomination for W. T. Preston (snagboat)". National Park Service. Retrieved April 22, 2017.
  5. ^ "W.T. Preston and Maritime Heritage Center". Anacortes History Museum and Maritime Heritage Center. City of Anacortes. Retrieved September 26, 2012.
[edit]