Jump to content

Sauser P6E

From Wikipedia, the free encyclopedia
(Redirected from Sauser P6E Replica)

Sauser P6E
P-6E built as a Curtiss F11C-2 Goshawk replica
Role Homebuilt aircraft
National origin United States
Designer Donald Sauser
Status Plans no longer available
Number built 4
Developed from Curtiss P-6 Hawk

The Sauser P6E is an American homebuilt aircraft that was designed and built by Donald Sauser of Tustin, California. The aircraft is an 82% scale reproduction of the 1920s Curtiss P-6 Hawk. When it was available the aircraft was supplied in the form of plans for amateur construction by the Sauser Aircraft Company.[1][2]

Design and development

[edit]

Like the aircraft it is patterned after, the Sauser P6E features a strut-braced biplane layout, a single-seat open cockpit with a windshield, fixed conventional landing gear with wheel pants and a single engine in tractor configuration.[1]

The aircraft is made from welded steel tubing and wood, with its flying surfaces covered in doped aircraft fabric. Its 25.83 ft (7.9 m) span wing has a wing area of 170.0 sq ft (15.79 m2). The acceptable power range is 180 to 260 hp (134 to 194 kW) and the standard engine used is a 212 hp (158 kW) Chevrolet small-block V-8 automotive conversion powerplant.[1]

The Sauser P6E has a typical empty weight of 1,425 lb (646 kg) and a gross weight of 2,040 lb (930 kg), giving a useful load of 615 lb (279 kg). With full fuel of 27 U.S. gallons (100 L; 22 imp gal) the payload for the pilot and baggage is 453 lb (205 kg).[1]

Operational history

[edit]

Sauser P6Es have been registered with the US Federal Aviation Administration under a variety of type designations, making them hard to catalog. Types registered include Sauser QC, Johnson F11C-2PJ (built as a F11C-2 replica), Wooldridge Saco P6-E Hawk and Roof Curtis Hawk P6E.[3][4][5][6]

Aircraft on display

[edit]

Specifications (Sauser P6E)

[edit]

Data from AeroCrafter[1]

General characteristics

  • Crew: one
  • Length: 18.91 ft (5.76 m)
  • Wingspan: 25.83 ft (7.87 m)
  • Wing area: 170.0 sq ft (15.79 m2)
  • Empty weight: 1,425 lb (646 kg)
  • Gross weight: 2,040 lb (925 kg)
  • Fuel capacity: 27 U.S. gallons (100 L; 22 imp gal)
  • Powerplant: 1 × Chevrolet small block V-8 eight cylinder, liquid-cooled, four stroke automotive conversion engine, 212 hp (158 kW)
  • Propellers: 2-bladed fixed pitch wooden

Performance

  • Maximum speed: 185 mph (298 km/h, 161 kn)
  • Cruise speed: 120 mph (190 km/h, 100 kn)
  • Stall speed: 60 mph (97 km/h, 52 kn)
  • Range: 425 mi (684 km, 369 nmi)
  • Wing loading: 12.0 lb/sq ft (59 kg/m2)

References

[edit]
  1. ^ a b c d e Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 250. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
  2. ^ a b March Field Air Museum (n.d.). "P-6 Hawk, Curtis (replica)". Archived from the original on March 3, 2014. Retrieved March 3, 2014.
  3. ^ Federal Aviation Administration (March 29, 2014). "N-Number Inquiry Results N90DS". Retrieved March 29, 2014.
  4. ^ Federal Aviation Administration (March 29, 2014). "N-Number Inquiry Results N442PJ". Retrieved March 29, 2014.
  5. ^ Federal Aviation Administration (March 29, 2014). "N-Number Inquiry Results N383SB". Retrieved March 29, 2014.
  6. ^ Federal Aviation Administration (March 29, 2014). "N-Number Inquiry Results N386PE". Retrieved March 29, 2014.
[edit]