Jump to content

RF connector

From Wikipedia, the free encyclopedia
(Redirected from RF coaxial connector)
This photo shows various circular RF connectors.
Various popular RF connectors
Electronic symbols for the plug and jack coaxial connectors
Time-domain reflectometry shows reflections due to impedance variations in mated RF connectors.

An RF connector (radio frequency connector) is an electrical connector designed to work at radio frequencies in the multi-megahertz range. RF connectors are typically used with coaxial cables and are designed to maintain the shielding that the coaxial design offers. Better models also minimize the change in transmission line impedance at the connection in order to reduce signal reflection and power loss.[1] As the frequency increases, transmission line effects become more important, with small impedance variations from connectors causing the signal to reflect rather than pass through. An RF connector must not allow external signals into the circuit through electromagnetic interference and capacitive pickup.

Mechanically, RF connectors may provide a fastening mechanism (thread, bayonet, braces, blind mate) and springs for a low ohmic electric contact while sparing the gold surface, thus allowing very high mating cycles and reducing the insertion force. Research activity in the area of radio-frequency circuit design has surged in the 2000s in direct response to the enormous market demand for inexpensive, high-data-rate wireless transceivers.[2]

Common types of RF connectors are used for television receivers, two-way radio, certain Wi-Fi devices with removable antennas, and industrial or scientific measurements instruments using radio frequencies.

See also

[edit]

References

[edit]
  1. ^ Horowitz, Paul; Hill, Winfield (1989). The Art of Electronics (2nd ed.). Cambridge University Press. p. 880. ISBN 0-521-37095-7.
  2. ^ "Connector Identifier" (PDF). Pasternack, Inc. Retrieved 1 July 2019.
[edit]