Jump to content

Poka-yoke

From Wikipedia, the free encyclopedia
(Redirected from Poka yoke)

Poka-yoke (ポカヨケ, [poka joke]) is a Japanese term that means "mistake-proofing" or "error prevention". It is also sometimes referred to as a forcing function or a behavior-shaping constraint.

A poka-yoke is any mechanism in a process that helps an equipment operator avoid (yokeru) mistakes (poka) and defects by preventing, correcting, or drawing attention to human errors as they occur.[1] The concept was formalized, and the term adopted, by Shigeo Shingo as part of the Toyota Production System.[2][3]

Etymology

[edit]

Poka-yoke was originally baka-yoke, but as this means "fool-proofing" (or "idiot-proofing") the name was changed to the milder poka-yoke.[4] Poka-yoke is derived from poka o yokeru (ポカを避ける), a term in shogi that means avoiding an unthinkably bad move.

Usage and examples

[edit]

More broadly, the term can refer to any behavior-shaping constraint designed into a process to prevent incorrect operation by the user.

A simple poka-yoke example is demonstrated when a driver of the car equipped with a manual gearbox must press on the clutch pedal (a process step, therefore a poka-yoke) prior to starting an automobile.[5] The interlock serves to prevent unintended movement of the car. Another example of poka-yoke would be the car equipped with an automatic transmission, which has a switch that requires the car to be in "Park" or "Neutral" before the car can be started (some automatic transmissions require the brake pedal to be depressed as well). These serve as behavior-shaping constraints as the action of "car in Park (or Neutral)" or "foot depressing the clutch/brake pedal" must be performed before the car is allowed to start. The requirement of a depressed brake pedal to shift most of the cars with an automatic transmission from "Park" to any other gear is yet another example of a poka-yoke application. Over time, the driver's behavior is conformed with the requirements by repetition and habit.

When automobiles first started shipping with on-board GPS systems, it was not uncommon to use a forcing function which prevented the user from interacting with the GPS (such as entering in a destination) while the car was in motion. This ensures that the driver's attention is not distracted by the GPS. However, many drivers found this feature irksome, and the forcing function has largely been abandoned. This reinforces the idea that forcing functions are not always the best approach to shaping behavior.

The microwave oven provides another example of a forcing function.[6] In all modern microwave ovens, it is impossible to start the microwave while the door is still open. Likewise, the microwave will shut off automatically if the door is opened by the user. By forcing the user to close the microwave door while it is in use, it becomes impossible for the user to err by leaving the door open. Forcing functions are very effective in safety critical situations such as this, but can cause confusion in more complex systems that do not inform the user of the error that has been made.

These forcing functions are being used in the service industry as well. Call centers concerned with credit card fraud and friendly fraud are using agent-assisted automation to prevent the agent from seeing or hearing the credit card information so that it cannot be stolen. The customer punches the information into their phone keypad, the tones are masked to the agent and are not visible in the customer relationship management software.[7]

History

[edit]

The term poka-yoke was applied by Shigeo Shingo in the 1960s to industrial processes designed to prevent human errors.[1] Shingo redesigned a process in which factory workers, while assembling a small switch, would often forget to insert the required spring under one of the switch buttons. In the redesigned process, the worker would perform the task in two steps, first preparing the two required springs and placing them in a placeholder, then inserting the springs from the placeholder into the switch. When a spring remained in the placeholder, the workers knew that they had forgotten to insert it and could correct the mistake effortlessly.[8]

Shingo distinguished between the concepts of inevitable human mistakes and defects in the production. Defects occur when the mistakes are allowed to reach the customer. The aim of poka-yoke is to design the process so that mistakes can be detected and corrected immediately, eliminating defects at the source.

Implementation in manufacturing

[edit]

Poka-yoke can be implemented at any step of a manufacturing process where something can go wrong or an error can be made.[9] For example, a fixture that holds pieces for processing might be modified to only allow pieces to be held in the correct orientation,[10] or a digital counter might track the number of spot welds on each piece to ensure that the worker executes the correct number of welds.[10]

Shingo recognized three types of poka-yoke for detecting and preventing errors in a mass production system:[2][9]

  1. The contact method identifies product defects by testing the product's shape, size, color, or other physical attributes.
  2. The fixed-value (or constant number) method alerts the operator if a certain number of movements are not made.
  3. The motion-step (or sequence) method determines whether the prescribed steps of the process have been followed.

Either the operator is alerted when a mistake is about to be made, or the poka-yoke device actually prevents the mistake from being made. In Shingo's lexicon, the former implementation would be called a warning poka-yoke, while the latter would be referred to as a control poka-yoke.[2]

Shingo argued that errors are inevitable in any manufacturing process, but that if appropriate poka-yokes are implemented, then mistakes can be caught quickly and prevented from resulting in defects. By eliminating defects at the source, the cost of mistakes within a company is reduced.[citation needed]

Benefits of poka-yoke implementation

[edit]

A typical feature of poka-yoke solutions is that they don't let an error in a process happen. Other advantages include:[11]

  • Less time spent on training workers;
  • Elimination of many operations related to quality control;
  • Unburdening of operators from repetitive operations;
  • Promotion of the work improvement-oriented approach and actions;
  • A reduced number of rejects;
  • Immediate action when a problem occurs;
  • 100% built-in quality control;
  • Preventing bad products from reaching customers;
  • Detecting mistakes as they occur;
  • Eliminating defects before they occur.

See also

[edit]

References

[edit]
  1. ^ a b Robinson, Harry (1997). "Using Poka-Yoke Techniques for Early Defect Detection". Berry College. Archived from the original on December 27, 2014. Retrieved May 4, 2009.
  2. ^ a b c Shingo, Shigeo; Dillon, Andrew (1989). A study of the Toyota production system from an industrial engineering viewpoint. Portland, OR: Productivity Press. ISBN 0-915299-17-8. OCLC 19740349.
  3. ^ John R. Grout, Brian T. Downs. "A Brief Tutorial on Mistake-proofing, Poka-Yoke, and ZQC". John Grout's Mistake-Proofing Center. Archived from the original on Apr 14, 2009. Retrieved May 4, 2009.
  4. ^ de Bucourt, Maximilian; Busse, Reinhard; Güttler, Felix; Wintzer, Christian; Collettini, Federico; Kloeters, Christian; Hamm, Bernd; Teichgräber, Ulf K. (2011). "Lean manufacturing and Toyota Production System terminology applied to the procurement of vascular stents in interventional radiology". Insights into Imaging. 2 (4): 415–423. doi:10.1007/s13244-011-0097-0. ISSN 1869-4101. PMC 3259414. PMID 22347963.
  5. ^ Sharma, Rajiv Kumar (2021). Quality management practices in MSME sectors. Springer tracts in mechanical engineering. Singapore: Springer. ISBN 978-981-15-9512-7.
  6. ^ Lockton, Dan; Harrison, David; Stanton, Neville A. (2010). "The Design with Intent Method: A design tool for influencing user behaviour". Applied Ergonomics. 41 (3): 382–392. doi:10.1016/j.apergo.2009.09.001. PMID 19822311. S2CID 6436131.
  7. ^ Adsit, Dennis (February 21, 2011). "Error-proofing strategies for managing call center fraud". iSixSigma. Archived from the original on Jun 15, 2011.
  8. ^ The Sayings of Shigeo Shingo: Key Strategies for Plant Improvement. QualityCoach.Net. July 1987. ISBN 9781563273841. Archived from the original on January 28, 2014. Retrieved August 20, 2012.
  9. ^ a b "Poka Yoke or Mistake Proofing :: Overview". The Quality Portal. Retrieved May 5, 2009.
  10. ^ a b Nikkan Kogyo Shimbun (1988). Poka-yoke: improving product quality by preventing defects. Productivity Press. p. 111. ISBN 978-0-915299-31-7.
  11. ^ Misiurek, Bartosz (2016). Standardized Work with TWI: Eliminating Human Errors in Production and Service Processes. New York: Productivity Press. ISBN 9781498737548.

Further reading

[edit]
[edit]