Path tracing

Path tracing is a computer graphics Monte Carlo method of rendering images of three-dimensional scenes such that the global illumination is faithful to reality. Fundamentally, the algorithm is integrating over all the illuminance arriving to a single point on the surface of an object. This illuminance is then reduced by a surface reflectance function (BRDF) to determine how much of it will go towards the viewpoint camera. This integration procedure is repeated for every pixel in the output image. When combined with physically accurate models of surfaces, accurate models of real light sources, and optically correct cameras, path tracing can produce still images that are indistinguishable from photographs.

Path tracing naturally simulates many effects that have to be specifically added to other methods (conventional ray tracing or scanline rendering), such as soft shadows, depth of field, motion blur, caustics, ambient occlusion, and indirect lighting. Implementation of a renderer including these effects is correspondingly simpler. An extended version of the algorithm is realized by volumetric path tracing, which considers the light scattering of a scene.

Due to its accuracy, unbiased nature, and algorithmic simplicity, path tracing is used to generate reference images when testing the quality of other rendering algorithms. However, the path tracing algorithm is relatively inefficient: A very large number of rays must be traced to get high-quality images free of noise artifacts. Several variants have been introduced which are more efficient than the original algorithm for many scenes, including bidirectional path tracing, volumetric path tracing, and Metropolis light transport.

History

The rendering equation and its use in computer graphics was presented by James Kajiya in 1986.^[1] Path tracing was introduced then as an algorithm to find a numerical solution to the integral of the rendering equation. A decade later, Lafortune suggested many refinements, including bidirectional path tracing.^[2]

Metropolis light transport, a method of perturbing previously found paths in order to increase performance for difficult scenes, was introduced in 1997 by Eric Veach and Leonidas J. Guibas.

More recently, CPUs and GPUs have become powerful enough to render images more quickly, causing more widespread interest in path tracing algorithms. Tim Purcell first presented a global illumination algorithm running on a GPU in 2002.^[3] In February 2009, Austin Robison of Nvidia demonstrated the first commercial implementation of a path tracer running on a GPU ^[4], and other implementations have followed, such as that of Vladimir Koylazov in August 2009.^[5] This was aided by the maturing of GPGPU programming toolkits such as CUDA and OpenCL and GPU ray tracing SDKs such as OptiX.

Path tracing has played an important role in the film industry. Earlier films had relied on scanline rendering to produce CG visual effects and animation. In 1998, Blue Sky Studios rendered the Academy Award-winning short film Bunny with their proprietary CGI Studio path tracing renderer, featuring soft shadows and indirect illumination effects. Sony Pictures Imageworks' Monster House was, in 2006, the first animated feature film to be rendered entirely in a path tracer, using the commercial Arnold renderer. Also, Walt Disney Animation Studios has been using its own optimized path tracer known as Hyperion ever since the production of Big Hero 6 in 2014.^[6] Pixar Animation Studios has also adopted path tracing for its commercial RenderMan renderer.

Description

Kajiya's rendering equation adheres to three particular principles of optics; the Principle of Global Illumination, the Principle of Equivalence (reflected light is equivalent to emitted light), and the Principle of Direction (reflected light and scattered light have a direction).

In the real world, objects and surfaces are visible due to the fact that they are reflecting light. This reflected light then illuminates other objects in turn. From that simple observation, two principles follow.

I. For a given indoor scene, every object in the room must contribute illumination to every other object.

II. Second, there is no distinction to be made between illumination emitted from a light source and illumination reflected from a surface.

Invented in 1984, a rather different method called radiosity was faithful to both principles. However, radiosity relates the total illuminance falling on a surface with a uniform luminance that leaves the surface. This forced all surfaces to be Lambertian, or "perfectly diffuse". While radiosity received a lot of attention at its introduction, perfectly diffuse surfaces do not exist in the real world. The realization that scattering from a surface depends on both incoming and outgoing directions is the key principle behind the bidirectional reflectance distribution function (BRDF). This direction dependence was a focus of research resulting in the publication of important ideas throughout the 1990s, since accounting for direction always exacted a price of steep increases in calculation times on desktop computers. Principle III follows.

III. The illumination coming from surfaces must scatter in a particular direction that is some function of the incoming direction of the arriving illumination, and the outgoing direction being sampled.

Kajiya's equation is a complete summary of these three principles, and path tracing, which approximates a solution to the equation, remains faithful to them in its implementation. There are other principles of optics which are not the focus of Kajiya's equation, and therefore are often difficult or incorrectly simulated by the algorithm. Path tracing is confounded by optical phenomena not contained in the three principles. For example,

Bright, sharp caustics; radiance scales by the density of illuminance in space.
Subsurface scattering; a violation of Principle III above.
Chromatic aberration, fluorescence, iridescence; light is a spectrum of frequencies.

Algorithm

The following pseudocode is a procedure for performing naive path tracing. The TracePath function calculates a single sample of a pixel, where only the Gathering Path is considered.

Color TracePath(Ray ray, count depth) {
  if (depth >= MaxDepth) {
    return Black;  // Bounced enough times.
  }

  ray.FindNearestObject();
  if (ray.hitSomething == false) {
    return Black;  // Nothing was hit.
  }

  Material material = ray.thingHit->material;
  Color emittance = material.emittance;

  // Pick a random direction from here and keep going.
  Ray newRay;
  newRay.origin = ray.pointWhereObjWasHit;

  // This is NOT a cosine-weighted distribution!
  newRay.direction = RandomUnitVectorInHemisphereOf(ray.normalWhereObjWasHit);

  // Probability of the newRay
  const float p = 1 / (2 * PI);

  // Compute the BRDF for this ray (assuming Lambertian reflection)
  float cos_theta = DotProduct(newRay.direction, ray.normalWhereObjWasHit);
  Color BRDF = material.reflectance / PI;

  // Recursively trace reflected light sources.
  Color incoming = TracePath(newRay, depth + 1);

  // Apply the Rendering Equation here.
  return emittance + (BRDF * incoming * cos_theta / p);
}

void Render(Image finalImage, count numSamples) {
  foreach (pixel in finalImage) {
    foreach (i in numSamples) {
      Ray r = camera.generateRay(pixel);
      pixel.color += TracePath(r, 0);
    }
    pixel.color /= numSamples;  // Average samples.
  }
}

All the samples are then averaged to obtain the output color. Note this method of always sampling a random ray in the normal's hemisphere only works well for perfectly diffuse surfaces. For other materials, one generally has to use importance sampling, i.e. probabilistically select a new ray according to the BRDF's distribution. For instance, a perfectly specular (mirror) material would not work with the method above, as the probability of the new ray being the correct reflected ray – which is the only ray through which any radiance will be reflected – is zero. In these situations, one must divide the reflectance by the probability density function of the sampling scheme, as per Monte Carlo integration (in the naive case above, there is no particular sampling scheme, so the PDF turns out to be ${\frac {1}{2\pi }}$ ).

There are other considerations to take into account to ensure conservation of energy. In particular, in the naive case, the reflectance of a diffuse BRDF must not exceed ${\frac {1}{\pi }}$ or the object will reflect more light than it receives (this however depends on the sampling scheme used, and can be difficult to get right).

Bidirectional path tracing

Sampling the integral can be done by either of the following two distinct approaches:

Backwards path tracing, where paths are generated starting from the camera and bouncing around the scene until they encounter a light source. This is referred to as "backwards" because starting paths from the camera and moving towards the light source is opposite the direction that the light is actually traveling. It still produces the same result because all optical systems are reversible.
Light tracing (or forwards path tracing), where paths are generated starting from the light sources and bouncing around the scene until they encounter the camera.

In both cases, a technique called next event estimation can be used to reduce variance. This works by directly sampling an important feature (the camera in the case of light tracing, or a light source in the case of backwards path tracing) instead of waiting for a path to hit it by chance. This technique is usually effective, but becomes less useful when specular or near-specular BRDFs are present. For backwards path tracing, this creates high variance for caustic paths that interact with a diffuse surface, then bounce off a specular surface before hitting a light source. Next event estimation cannot be used to sample these paths directly from the diffuse surface, because the specular interaction is in the middle. Likewise, it cannot be used to sample paths from the specular surface because there is only one direction that the light can bounce. Light tracing has a similar issue when paths interact with a specular surface before hitting the camera. Because this situation is significantly more common, and noisy (or completely black) glass objects are very visually disruptive, backwards path tracing is the only method that is used for unidirectional path tracing in practice.

Bidirectional path tracing provides an algorithm that combines the two approaches and can produce lower variance than either method alone. For each sample, two paths are traced independently: one using from the light source and one from the camera. This produces a set of possible sampling strategies, where every vertex of one path can be connected directly to every vertex of the other. The original light tracing and backwards path tracing algorithms are both special cases of these strategies. For light tracing, it is connecting the vertices of the camera path directly to the first vertex of the light path. For backwards path tracing, it is connecting the vertices of the light path to the first vertex of the camera path. In addition, there are several completely new sampling strategies, where intermediate vertices are connected. Weighting all of these sampling strategies using multiple importance sampling creates a new sampler that can converge faster than unidirectional path tracing, even though more work is required for each sample. This works particularly well for caustics or scenes that are lit primarily through indirect lighting.

Performance

A path tracer continuously samples pixels of an image. The image starts to become recognizable after only a few samples per pixel, perhaps 100. However, for the image to "converge" and reduce noise to acceptable levels usually takes around 5000 samples for most images, and many more for pathological cases. Noise is particularly a problem for animations, giving them a normally unwanted "film grain" quality of random speckling.

The central performance bottleneck in path tracing is the complex geometrical calculation of casting a ray. Importance sampling is a technique which is motivated to cast fewer rays through the scene while still converging correctly to outgoing luminance on the surface point. This is done by casting more rays in directions in which the luminance would have been greater anyway. If the density of rays cast in certain directions matches the strength of contributions in those directions, the result is identical, but far fewer rays were actually cast. Importance sampling is used to match ray density to Lambert's cosine law, and also used to match BRDFs.

Metropolis light transport can result in a lower-noise image with fewer samples. This algorithm was created in order to get faster convergence in scenes in which the light must pass through odd corridors or small holes in order to reach the part of the scene that the camera is viewing. It has also shown promise in correctly rendering pathological situations with caustics. Instead of generating random paths, new sampling paths are created as slight mutations of existing ones. In this sense, the algorithm "remembers" the successful paths from light sources to the camera.

Scattering distribution functions

The reflective properties (amount, direction, and color) of surfaces are modeled using BRDFs. The equivalent for transmitted light (light that goes through the object) are BSDFs. A path tracer can take full advantage of complex, carefully modeled or measured distribution functions, which controls the appearance ("material", "texture", or "shading" in computer graphics terms) of an object.

Notes

^ Kajiya, J. T. (1986). "The rendering equation". Proceedings of the 13th annual conference on Computer graphics and interactive techniques. ACM. CiteSeerX 10.1.1.63.1402.
^ Lafortune, E, Mathematical Models and Monte Carlo Algorithms for Physically Based Rendering, (PhD thesis), 1996.
^ Purcell, T J; Buck, I; Mark, W; and Hanrahan, P, "Ray Tracing on Programmable Graphics Hardware", Proc. SIGGRAPH 2002, 703 – 712. See also Purcell, T, Ray tracing on a stream processor (PhD thesis), 2004.
^ Robison, Austin, "Interactive Ray Tracing on the GPU and NVIRT Overview", slide 37, I3D 2009.
^ Vray demo; Other examples include Octane Render, Arion, and Luxrender.
^ Seymour, Mike. "Disney's new Production Renderer 'Hyperion' – Yes, Disney!". fxguide. Retrieved 16 September 2017.
^ Veach, E., and Guibas, L. J. Metropolis light transport. In SIGGRAPH’97 (August 1997), pp. 65–76.
SmallPt is an educational path tracer by Kevin Beason. It uses 99 lines of C++ (including scene description). This page has a good set of examples of noise resulting from this technique.