Jump to content

Open-Source Lab (book)

Edit links
From Wikipedia, the free encyclopedia
(Redirected from Open-source labs)
Open-Source Lab
AuthorJoshua M. Pearce
LanguageEnglish
Subject
PublisherElsevier
Publication date
November 7, 2013 (2013-11-07)
Publication placeUnited States
Media typePrint
Pages271
ISBN978-0124104624 (hardcover)
OCLC880668233
681/.750285
LC ClassQ185 .P43 2014

The Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs by Joshua M. Pearce was published in 2014 by Elsevier.

The academic book is a guide, which details the development of free and open-source hardware primarily for scientists and university faculty.[1] It provides step-by-step instructions on building laboratory hardware and scientific instruments. It also provides instructions on digital design sharing, Arduino microcontrollers, RepRap 3D Printers for scientific use and how to use open-source hardware licenses. The Guardian discusses how ideas in the Open-Source Lab could enable 3D printing to offer developing-world scientists savings on replica lab kits.[2] The Open-Source Lab book has been covered extensively by the media.[3][4][5][6][7][8][9][10][11][12][13] It was one of the top books chosen by Shareable for "New Books About Sharing, Cities and Happiness".[14]

The book itself is not open source and is sold under copyright by Elsevier.

Claims

[edit]

The author claims the method enables researchers in every discipline to develop research tools at low costs following his previous research in open-source hardware published in Science.[15][16] These claims have been generally supported by others using the techniques, such as those in the DIYbio community.[17] While discussing the book in an interview with 3-D Printing Industry, Pearce has claimed to save thousands of dollars in his own lab,[18] and his various studies on the economics of printing lab equipment, such as a PLOS ONE article on open-source optics have generally found over 90% savings.[19] A study on the use of 3D printing in this context cited this book as also being good for the environment.[20]

Chapters

[edit]
  1. Introduction to Open-Source Hardware for Science
  2. The Benefits of Sharing—Nice Guys and Girls do Finish First
  3. Open Licensing—Advanced Sharing
  4. Open-Source Microcontrollers for Science: How to Use, Design Automated Equipment With and Troubleshoot
  5. RepRap for Science—How to Use, Design, and Troubleshoot the Self-Replicating 3-D Printer
  6. Digital Designs and Scientific Hardware
  7. The Future of Open-Source Hardware and Science

Uptake

[edit]

Copies of Open-Source Lab were a prize in an Instructables "Build My Lab" Contest sponsored by Tekla Labs.[21]

See also

[edit]

References

[edit]
  1. ^ Book of the Day: How to Build Your Own Hardware and Reduce Research Costs, Michel Bauwens, P2P Foundation 12/28/2013
  2. ^ 3D printing could offer developing world savings on replica lab kit - The Guardian, Friday 21 February 2014 01.59 EST
  3. ^ MTU Prof Writes 3D Printing Guide For Scientists On A Budget - CBS 11-18-2013
  4. ^ DIY and Save: A Scientist's Guide to Making Your Own Lab Equipment - Science Daily 11-13-2013
  5. ^ Book Covers DIY Open-Source Hardware for Science Projects - Power Electronics
  6. ^ MTU Prof writes 3D printing guide to making your own low-cost lab equipment - 3Drs
  7. ^ How to build lab equipment with open-source hardware - Machine Design
  8. ^ 3D printing can reduce science lab equipment costs by 90% - Nanowerk
  9. ^ "Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs - KurzweilAI". kurzweilai.net.
  10. ^ 3D printing used to create a basement laboratory on the cheap Archived 2014-03-04 at the Wayback Machine - Geek
  11. ^ Ready Roundup: Microsoft 3D Builder, Open Source Lab, DMG Mori, and Victoria’s Secret - Rapid Ready Tech
  12. ^ Equip your lab for less - 3D print your equipment -Labonline
  13. ^ DIY Guide for 3D Printed Lab Equipment - 3D Printing Insider
  14. ^ Top 15 New Books About Sharing, Cities and Happiness – Shareable.
  15. ^ Pearce, Joshua M. 2012. “Building Research Equipment with Free, Open-Source Hardware.” Science 337 (6100): 1303–1304.
  16. ^ How Scientists Can Cut Costs by Making Their Own Lab Equipment - Lab Manager - November 19, 2013
  17. ^ Science Counterculture: On taking DIYbio to the next level - The Scientist - December 9, 2013
  18. ^ "Printers for Pearce: An Interview with 3D Printers for Peace's Dr. Joshua Pearce". 3D Printing Industry.
  19. ^ Zhang C, Anzalone NC, Faria RP, Pearce JM (2013) Open-Source 3D-Printable Optics Equipment. PLoS ONE 8(3): e59840. doi:10.1371/journal.pone.0059840
  20. ^ Kreiger, M.(2013). Environmental Life Cycle Analysis of Distributed 3-D Printing and Conventional Manufacturing of Polymer Products. ACS Sustainable Chemistry & Engineering.
  21. ^ "Build My Lab Contest". Instructables.com.
[edit]
Retrieved from "https://wiki.riteme.site/w/index.php?title=Open-Source_Lab_(book)&oldid=1225405060"